Production of18F using a natural water target at the CV-28 cyclotron at IPEN-CNEN/SP

The development of an automated water target for the production of¹⁸F is described. The system was fully fested and shown to be reliable and secure. The chemical separation of¹⁸F was carried out using an anionexchange resin and K₂CO₃ as eluent. The¹⁸F production yields were, on average, (4.81±0.42) MBq/Ah and the specific activity was higher than 6.623×10⁵ MBq/mmol. Heat transfer measurements and calculations were made.     

Carbon-carbon coupling on tetrahedral iridium clusters: X-ray molecular structures and multinuclear NMR studies of the two isomeric forms of [Ir4(CO)6(μ3-η-HCCPh)(μ2-η-C4H2Ph2)(μ-PPh2)2]

The reactions of [HIr₄(CO)₉(Ph₂PCCPh)(μ-PPh₂)] (1) or [Ir₄(CO)₈(μ₃-η²-HCCPh)(μ-PPh₂)₂] (2) with HCCPh gave two isomeric forms of [Ir₄(CO)₆(μ₃-η²-HCCPh)(μ₂-η⁴-C₄H₂Ph₂)(μ-PPh₂)₂] (3 and 4) in good yields as the only products. These compounds were characterized with analytical and spectroscopic data including ¹H, ¹³C and ³¹P NMR (1 and 2D) spectroscopy and their molecular structures were established by X-ray diffraction studies. Compounds 3 and 4 exhibit the same distorted butterfly metal polyhedral arrangement of metal atoms with two μ-PPh₂ that occupy different positions in the structures of the two isomers. Both molecules contain a HCCPh ligand bonded in a μ₃-η²-// mode to one of the wings of the butterfly and a metallacyclic ring, which resulted from head-to-tail coupling, in the case of [Ir₄(CO)₆(μ₃-η²-HCCPh){μ₂-η⁴-(H)CC(Ph)C(H)C(Ph)}(μ-PPh₂)₂] (3) and tail-to-tail coupling, in that of [Ir₄(CO)₆(μ₃-η²-HCCPh){μ₂-η⁴-(H)CC(Ph)C(Ph)C(H)}(μ-PPh₂)₂] (4), and which is linked to two metal atoms of the second wing of the butterfly.     

A method for calibration and validation subset partitioning

This paper proposes a new method to divide a pool of samples into calibration and validation subsets for multivariate modelling. The proposed method is of value for analytical applications involving complex matrices, in which the composition variability of real samples cannot be easily reproduced by optimized experimental designs. A stepwise procedure is employed to select samples according to their differences in both x (instrumental responses) and y (predicted parameter) spaces. The proposed technique is illustrated in a case study involving the prediction of three quality parameters (specific mass and distillation temperatures at which 10 and 90% of the sample has evaporated) of diesel by NIR spectrometry and PLS modelling. For comparison, PLS models are also constructed by full cross-validation, as well as by using the Kennard-Stone and random sampling methods for calibration and validation subset partitioning. The obtained models are compared in terms of prediction performance by employing an independent set of samples not used for calibration or validation. The results of F-tests at 95% confidence level reveal that the proposed technique may be an advantageous alternative to the other three strategies.     

Capillary zone electrophoretic determination of tosufloxacin and trovafloxacin in urine

Summary A simple and rapid capillary zone electrophoretic method with UV detection has been developed for determination of tosufloxacin and trovafloxacin. The separation was performed in fused-silica capillaries (57 cm length × 75μm i.d.); the running buffer was 35mm borate + 35mm phosphate buffer solution, pH 8.6, containing 6% (v/v) acetonitrile. The applied potential was 15 kV, the temperature 30°C, and detection was at 262 nm. Piromidic acid was used as the internal standard. Response was linearly dependent on concentration in the range 1.0–120.0 μg mL⁻¹ and the detection limit was 0.2 μg mL⁻¹ for both compounds. The analysis was highly reproducible (RSD between 3.41 and 1.25%). The method was applied to the determination of tosufloxacin and trovafloxacin in human and rat urine. The method was validated by using HPLC as a reference method. Recovery was between 96.8 and 102%.     

Mechanism for basic hydrolysis of N-nitrosoguanidines in aqueous solution

A kinetic study was carried out on the hydrolysis of two N-nitrosoguanidines, 1-nitroso-1-methyl-3-tolylsulfonylguanidine (TSGNO) and 1-nitroso-1-methyl-3-benzoylguanidine (BCGNO). We observed an absence of buffer catalysis using H(2)PO(4)(-)/HPO(4)(2)(-), H(3)BO(3)/H(2)BO(3)(-), and HCO(3)(-)/CO(3)(2)(-) regulators and a complex dependency of the rate constant on the pH. We discovered the existence of three simultaneous reaction paths: spontaneous decomposition of the neutral form of the N-nitrosoguanidine, decomposition of the monoanion, and decomposition through the form of the dianion. The analysis of the kinetic data has allowed us to obtain the acidity constant for the formation of the monoanion of the N-nitrosoguanidine, with values of p = 11.5. The reaction rate for the process through the monoanion, k(2), decreases as the acidity increases. The application of the principle of nonperfect synchronization shows that the basicity and reactivity do not correlate when there exists a possibility of stabilization of the negative charge by resonance. This behavior is consistent with the mechanism E1cB whereby the stabler the negative charge, the slower the elimination reaction. When dealing with the case of the elimination through the neutral form we observe that the reaction rate increases together with the capacity of stabilization of the positive charge on the nitrogen atom adjacent to the imino group. For the reaction through the dianion we used a maximum value of k(3) = 10(10) s(-)(1) to estimate the value of p for the formation of the dianion of the N-nitrosoguanidine, obtaining values of p < 24.     

Holo- and hemidirected lead(II) in the polymeric [Pb(4)(mu-3,4-TDTA)2(H2O)2]*4H2O complex. N,N,N',N'-tetraacetate ligands derived from o-phenylenediamines as sequestering agents for lead(II)

The coordinating ability of the ligands 3,4-toluenediamine-N,N,N',N'-tetraacetate (3,4-TDTA), o-phenylenediamine-N,N,N',N'-tetraacetate (o-PhDTA), and 4-chloro-1,2-phenylenediamine-N,N,N',N'-tetraacetate (4-Cl-o-PhDTA) (H4L acids) toward lead(II) is studied by potentiometry (25 degrees C, I = 0.5 mol x dm(-3) in NaClO4), UV-vis spectrophotometry, and 207Pb NMR spectrometry. The stability constants of the complex species formed were determined. X-ray diffraction structural analysis of the complex [Pb4(mu-3,4-TDTA)4(H2O)2]*4H2O (1) revealed that 1 has a 2-D structure. The layers are built up by the polymerization of centrosymmetric [Pb4L2(H2O)2] tetranuclear units. The neutral layers have the aromatic rings of the ligands pointing to the periphery, whereas the metallic ions are located in the central part of the layers. In compound 1, two types of six-coordinate lead(II) environments are produced. The Pb(1) is coordinated to two nitrogen atoms and four carboxylate oxygens from the ligand, whereas Pb(2) has an O6 trigonally distorted octahedral surrounding. The lead(II) ion is surrounded by five carboxylate oxygens and a water molecule. The carboxylate oxygens belong to four different ligands that are also joined to four other Pb(1) ions. The selective uptake of lead(II) was analyzed by means of chemical speciation diagrams as well as the so-called conditional or effective formation constants K(Pb)eff. The results indicate that, in competition with other ligands that are strong complexing agents for lead(II), our ligands are better sequestering agents in acidic media.     

Analytical process control of the Celeste R&D installation of IPEN-CNEN/SP

Celeste-1 is a lab-scale hot cell intended for R&D work in reprocessing of low burn-up spent fuel elements. The studies are concerned with head-end, first separation cycle by Purex Process using mini mixer-settlers and development of analytical techniques. The analytical monitoring for process control purposes is based on several off-line techniques, such as X-ray fluorescence spectrometry, potentiometric titration, -and -spectroscopy, spectrophotometry, fluorimetry, density measurement and gas chromatography. The analytical treatment takes place in a shielded working place analytical hot cell, glove boxes and hoods and some final measurements are made in the associated analytical laboratory. A pneumatic system is used for transporting analytical samples. All analytical procedures are ready and in operation.     

Thermo-programmed reduction study of Pt/WO<Subscript>x</Subscript>–ZrO<Subscript>2</Subscript> materials by thermogravimetry

The thermo-programmed reduction study of Pt/WO_x–ZrO₂ materials prepared with different tungsten loading were performed by thermogravimetry. The samples were synthesized by impregnation method and calcined at 600, 700 and 800°C. The characterizations of both un-calcined and calcined materials were carried out using different techniques: thermal analysis (TG and DTA), X-ray diffraction (XRD) and thermo-programmed reduction (TPR). TG and DTA analysis of un-calcined were used to determination of calcination temperatures of the samples. XRD diffractograms were useful to help us in the determination of phase presents. TPR profiles showed between three and four events at different temperatures attributed to platinum reduction and the different stages of tungsten specie reduction.