Impedance study of Ni–Co electro-deposition on Fe powder particles in fluidised bed systems

The electrochemical impedance method was applied during the electrochemical deposition of a binary Ni–Co coating on iron powder in a fluidised bed electrode system. The influence of the suspension density on the charge transfer in the course of the electro-deposition process was studied. At a potential of −900 mV (vs. Ag/AgCl/3 M KCl), when the binary Ni–Co layer was formed, the impedance data were characterised by two semicircles with the semicircle at high frequencies being larger in magnitude. A contribution of the diffusion process to the overall current was observed. The optimal suspension density for the charge transfer in the bed was 10×10⁻³–15×10⁻³ (i.e., 4–6 g of iron powder in 50 ml of electrolyte). The most probable mechanism of the charge transfer for the studied concentrations of powder particles is the convective mechanism. The iron particles dispersed in the electrolyte were considered to act as either a depolariser or an additional working electrode depending on the applied electrode potential and on the suspension density.     

Palladium-catalyzed carbon-carbon bond-forming 1,2-ligand migration of organoalanes

A one-pot, two-step process that transforms terminal alkynes into ethyl methyl-substituted benzylic quaternary carbon centers is described. (E)-2,2-Disubstituted-1-alkenyldimethylalanes have been shown to participate in 1,2-alkyl migration from aluminum to carbon with concomitant arylation at the 2-position to furnish ethyl methyl-substituted benzylic quaternary carbon centers, when reacted intramolecularly with aryl halides and triflates in the presence of a Pd(0) catalyst. The protocol is initiated with Cp2ZrCl2-catalyzed methylalumination of terminal alkynes followed by palladium-catalyzed intramolecular arylation of the resulting (E)-2,2-disubstituted-1-alkenyldimethylalanes, leading to 1,2-methyl shift from aluminum to carbon. In that sequence, a total of three new C-C single bonds are made, and two of the three alkyl groups on Me3Al transferred to the substrate on vicinal carbons. This method was applied to a variety of substrates, and the mechanism was investigated by deuterium-labeling experiments, which revealed that protodealumination of the final dialkylaluminum triflate or halide intermediates by CH3CN results in the formation of the fourth bond in the course of the transformation.     

Targeting bacterial virulence: inhibitors of type III secretion in Yersinia

Agents that target bacterial virulence without detrimental effect on bacterial growth are useful chemical probes for studies of virulence and potential candidates for drug development. Several gram-negative pathogens employ type III secretion to evade the innate immune response of the host. Screening of a chemical library with a luciferase reporter gene assay in viable Yersinia pseudotuberculosis furnished several compounds that inhibit the reporter gene signal expressed from the yopE promoter and effector protein secretion at concentrations with no or modest effect on bacterial growth. The selectivity patterns observed for inhibition of various reporter gene strains indicate that the compounds target the type III secretion machinery at different levels. Identification of this set of inhibitors illustrates the approach of utilizing cell-based assays to identify compounds that affect complex bacterial virulence systems.     

Separation and analysis of the major constituents of cloves by micellar electrokinetic chromatography

A micellar electrokinetic chromatographic method was developed and applied for the first time to the separation and quantification of the main components of cloves, namely eugenol and beta-caryophyllene. The analytes were separated in less than ten minutes in an unmodified fused silica capillary (effective length: 40.0 cm) using a background electrolyte composed of 25 mM carbonate buffer (pH 10.0) and 60 mM sodium dodecylsulfate. Analyte concentrations were determined in clove oil and in methanolic clove extracts after simple sequential dilution with methanol and background electrolyte, and the resulting electropherograms showed no interference due to other components. Precision assays gave satisfactory results, with mean standard deviation of peak areas lower than 4.7% (lower than 1.5% for migration times). The eugenol content of a commercial clove oil was about 70% (RSD% = 3.2), while that of beta-caryophyllene was about 15% (RSD% = 4.2); in clove extracts, on the other hand, eugenol was approximately 15% (RSD% = 4.7) and beta-caryophyllene 4% (RSD% = 5.1). Accuracy was also good (mean recovery >98%).     

Influence of phytohormones on polar and hydrophobic parts of mixed phospholipid monolayers at water/air interface

Surface parameters--the limiting area, collapse pressure, and compressibility modulus for monolayers of phospholipids containing a determined hydrophobic part (16:0) but different polar parts (PPL) and a determined polar part (PC) but different fatty acids (HPL), characteristic of nonembryogenic (NE) and embryogenic (E) winter wheat calli--were evaluated at 15 degrees C. These parameters were dependent on the kind of hydrophilic group and the size of the hydrophobic part of phospholipids. In the case of PPL, higher values of Alim and picoll were noticed for NE phospholipids. In the case of HPL, lower Alim and higher picoll were detected for NE than for E monolayers. All investigated phospholipid systems stimulated the adsorption of phytohormones from the water subphase. The influence of phytohormones of anionic (IAA, 2-4-D), cationic (kinetin, zeatin), and nonionic character (zearalenone) was examined. It appeared that the surface activity of phytohormones depended strongly on the kind of tissue from which the phospholipid mixture was extracted and, in a lesser degree, on their charge. In PPL systems with a determined hydrophobic part (16:0), no great differences in phytohormone influence on NE and E monolayers were observed (except of IAA). The greatest phytohormone influence on NE monolayers in HPL systems was related to the structure of the hydrophobic part of phospholipids. IAA, the most active (with the highest Alim values) among the phytohormones examined, influenced both HPL and PPL monolayers. This indicated the interactions of IAA with polar groups of phospholipids. Phytohormones also changed the monolayer stability against collapse process and the direction of changes depended on the kind of tissue (embryogenic or nonembryogenic).     

Comparative study of photodynamic properties of 13,15-N-cycloimide derivatives of chlorin p6

Comparative study of 13,15-[N-(2-hydroxyethyl)]cycloimide chlorin p6 (2), 13,15-(N-acetoxy)cycloimide chlorin p6 (3), 13,15-(N-hydroxy)cycloimide chlorin p6 methyl ester (4) and 13,15-(N-methoxy)cycloimide chlorin p6 methyl ester (5) together with the previously investigated 13,15-[N-(3-hydroxypropyl)]cycloimide chlorin p6 (1) was performed. The dependence of the key photodynamic properties of 1-5 on the introduced substituents was analyzed. The photoinduced cell-killing activity of 4 is 100- and 280-fold higher than that of chlorin p6 and Photogem, respectively, as estimated on A549 human lung adenocarcinoma cells. The activity is reduced eight times in the order 4 > 5 > 1 > 2 > 3. The intracellular accumulation of 1-5 occurs in cytoplasm in a monomeric form bound to the lipids of cellular membranes. This form of 1, 2, 3, 4 and 5 is characterized by the high quantum yield of singlet oxygen generation, which depends on the introduced substituents, 0.66, 0.59, 0.35, 0.51 and 0.73, respectively. The photostability is two-fold less for 1 and four-fold less for 2, 3 and 5 than for 4. The rates of cellular uptake and efflux of 1-5 vary widely, thus providing the way to optimize the pharmacological properties of the photosensitizer (PS) using the respective substituents. Modifying the substituents, 1-5 were targeted to different cellular organelles. The enhanced accumulation in the Golgi apparatus and mitochondria complemented with diffuse staining of intracellular membranous structures is a property of 1-4. Compound 5 accumulates selectively in the lipid droplets and stains weakly perinuclear structures. Temperature-sensitive mechanisms of transport are responsible for the 1-4 uptake. Diffusion can play a role in the internalization of 5 but not of 1-4. Endocytosis via caveolae, clathrin-dependent and adenosine triphosphate-dependent pathways are not noticeably involved in the 1-5 internalization. Independently from their intracellular localization 1, 4 and 5 are highly efficient near-IR PS, which induce predominantly an apoptotic type of cell death under conditions providing ca 50% level of phototoxicity and necrosis at the 100% level of phototoxicity.     

Photoinduced electron transfer in platinum(II) terpyridinyl acetylide complexes connected to a porphyrin unit

A series of six new dyads consisting of a zinc or magnesium porphyrin appended to a platinum terpyridine acetylide complex via a para-phenylene bisacetylene spacer are described. Different substituents on the 4' position of the terpyridinyl ligand were explored (OC7H15, PO3Et2, and H). The ground-state electronic properties of the dyads are studied by electronic absorption spectroscopy and electrochemistry, and they indicate some electronic interactions between the porphyrin subunit and the platinum complex. The photophysical properties of these dyads were investigated by steady-state, time-resolved, and femtosecond transient absorption spectroscopy in N,N-dimethylformamide solution. Excitation of the porphyrin unit leads to a very rapid electron transfer (2-20 ps) to the nearby platinum complex followed by an ultrafast charge recombination, thus preventing any observation of the charge separated state. The variation in the rate of the photoinduced electron transfer in the series of dyads is consistent with Marcus theory. The results underscore the potential of the para-phenylene bisacetylene bridge to mediate a rapid electron transfer over a long donor-acceptor distance.     

Peak compression effects in capillary electrochromatography of basic drug substances using a strong cation-exchanger

Peak compression effects in capillary electrochromatography of basic drug substances using a strong cation-exchanger have been studied. Extremely narrow peaks with apparent efficiencies of several million plates per meter could be obtained when the composition of the sample zone differed from that of the mobile phase. The increased efficiencies were predominately observed when the analyte had an elution time similar to that of the electroosmotic flow marker. Peak compression was found to be reproducible and could be obtained for all investigated basic drug substances by altering the composition of the mobile phase in such a way that the analyte co-eluted with the sample zone. An explanation of the observed phenomena is proposed. A sample zone differing in composition from the mobile phase will disturb the equilibrium between the stationary and mobile phase. The elution rate of an analyte will consequently be different when residing inside the sample zone. If the analyte migrates through the sample zone at a higher speed than the rest of the mobile phase and is strongly retained after passing through a boundary in the sample zone, a continuous stacking can be obtained trapping the analyte as a very narrow band.     

Sorption behavior of acidic herbicides on carbon nanotubes

Carbon nanotubes and graphitized carbon are investigated as adsorbents for solid phase extraction of dicamba and 2,4,5-T, two phenoxyalkanoic acid herbicides. These adsorbents have much greater adsorption capability than that of C₁₈ bonded silica, which was also tested for comparison studies. The adsorption capacity increases remarkably at lower pH of the sample solution. Freundlich isotherms were applied to analyze the data. Our studies suggest that carbon nanotubes have great potential applications in environmental analysis.     

In situ spectroscopic characterization of rectifying molecular monolayers self-assembled on gold.

We report visible, Raman, and infrared spectra of self-assembled monolayers (SAMs) formed by the donor-(pi-bridge)-acceptor chromophore, Z-beta-[N-(omega-acetylthioalkyl)-4-quinolinium]-alpha-cyano-4-styryldicyanomethanide (CH3CO-S-CnH2n-Q3CNQ where n=8, 10), on gold-coated substrates. The data are compared with the spectra collected for the same compound in solution and in the solid state, and with those obtained for a Langmuir-Blodgett (LB) monolayer of C16H33-Q3CNQ deposited on gold. Spectral analysis confirms that in solution, in the solid state and in the LB film the chromophore has a zwitterionic (D+-pi-A-) ground state. At variance with this well-known result, our data show that in SAMs deposited on gold the chromophore has a more neutral, quinoid ground state. We relate this difference to the different packing of the molecules in the two different films: in SAMs in fact the chromophores stand almost vertical with respect to the substrate, whereas in LB films they make an angle of about 45 degrees. The Q3CNQ molecule is a well-known molecular rectifier, and for SAMs we were able to check the direction of electron flow at forward bias on the same samples that have been characterized spectroscopically, shedding light on the rectification mechanism.