Reduction of 1,4-dichlorobut-2-yne by titanocene to a 1,2,3-butatriene. Formation of a 1-titanacyclopent-3-yne and a 2,5-dititanabicyclo[2.2.0]hex-1(4)-ene

The 2,5-dititanabicyclo[2.2.0]hex-1(4)-ene (bis-titanocene-mu-(Z)-1,2,3-butatriene complex)3 is formed starting from [Cp2Ti(eta2-Me3SiC2SiMe3)] by in situ generated titanocene and 1,4-dichlorobut-2-yne via the 1-titanacyclobut-3-yne (2).     

一种新的库仑微水滴定仪的设计方法

在传统微库仑滴定仪原理的基础上，利用８７５１单片机和微机，采用对电解电流时间调制的方法以及测量精度为准则判断滴定终点，从而大大地提高了仪器的测量精度和重复性。     

Three‐Component Reactions with (S)‐Methyl Pyroglutamate: An Efficient Way to Diversely Substituted Asymmetric Amidocyclohexenes

Chiral N‐dienyl lactams are crucial building blocks for the synthesis of complex organic compounds. However, their generation is rather challenging. This paper reports the novel one‐pot reaction of (S)‐methyl pyroglutamate as the a mide component with different a ldehydes and d ienophiles (AAD reaction) to give novel chiral 1‐amido‐2‐cyclohexenes. The corresponding N‐dienyl lactams generated in situ undergo subsequent Diels–Alder reactions in good yield and diastereoselectivity. The scope and limitations of the three‐component protocol were investigated. X‐ray and NMR spectroscopic analysis of the products as well as DFT calculations of the intermediates were also performed to explain the observed stereoselectivity and structural features.     

Air sampling of aromatic hydrocarbons in the presence of ozone by solid-phase microextraction

Effects of ozone on air sampling of standard gas mixtures of aromatic hydrocarbons were tested using solid-phase microextraction (SPME). Standard concentrations of ozone ranging from 10 ppb (v/v) to 6400 ppm (v/v) were generated using an in-house built ozone generator based on corona discharge. Effects of temperature, discharge voltage, and oxygen flow on the ozone generation were tested. The working dc voltage had the greatest effect on generated ozone concentration and was proportional to the ozone concentration. Generation temperature and oxygen flow rate were inversely proportional to ozone concentrations. Produced ozone was mixed with standard benzene, toluene, ethylbenzene, and xylenes (BTEX) gas at less than 100 ppb (v/v). Air samples were collected with poly(dimethylsiloxane) (PDMS) 100 microm SPME fibers and analyzed by gas chromatography (GC)-flame ionization detection (FID) and GC-MS. Significant reductions of BTEX concentrations were observed. In addition, some products of BTEX-ozone-oxygen reactions were identified. SPME worked well as a rapid sampler for BTEX and BTEX-ozone-oxygen reaction products. No significant deterioration of the PDMS coating and no significant reduction of absorption capacity were observed after repeated exposure to ozone.     

丹宁纤维素富集-氢化物发生ICP-AES同时测定水中痕量锗

研究了丹宁纤维素富集10~(-11)g/ml级锗的条件,并考察了地下水中36种共存离子对磷酸介质中氢化物发生ICP-AES测定锗的干扰和消除,应用于测定地下水中的超痕量锗,结果满意,检出限为15ng/L。     

A mesoporous template route to the low-temperature preparation of efficient green light emitting Zn2SiO4:Mn phosphors

Green light emitting Zn2SiO4:Mn phosphors have been prepared via a low-temperature solid-state reaction using mesoporous silica SBA-15 template. This mesoporous silica template method features low-temperature formation of phosphors and easy doping. The structure and morphology of the phosphors were characterized by XRD, SEM, TEM, and N2 adsorption/desorption techniques, which confirmed the single crystallinity, ordered mesostructure, closed pore channels, and elongated ropelike morphology. The luminescent properties were examined by photoluminescence spectroscopy at room temperature, and the results of fluorescence decay time measurements show non-single-exponential decay behavior and a decrease of the decay time with an increase of the Mn concentration.     

Modeling of the relationship between electroosmotic flow and separation parameters in capillary zone electrophoresis using artificial neural networks and experimental design

The prediction of migration time of electroosmotic flow (EOF) marker was achieved by applying artificial neural networks (ANN) model based on principal component analysis (PCA) and standard normal distribution simulation to the input variables. The voltage of performance, the temperature in the capillary, the pH and the ionic strength of background electrolytes (BGE) were applied as the input variables to ANN. The range of the performance voltage studied was from 15 to 27 kV, and that of the temperature in the capillary was from 20 to 30 °C. For the pH values studied, the range was from 5.15 to 8.04. The range of the ionic strength investigated in this paper was from 0.040 to 0.097. The prediction abilities of ANN with different pre-processing procedure to the input variables were compared. Under the same performance conditions, the average prediction error of the migration time of the EOF marker was 5.46% with RSD = 1.76% according to 10 parallel runs of the optimized ANN structure by the proposed approach, and that of the 10 parallel predictions of the optimal ANN structure for the different performance conditions was 12.95% with RSD = 2.29% according to the proposed approach. The study showed that the proposed method could give better predicted results than other approaches discussed.     

High extraction ability of 1,3-dialkynyl calixarene towards mercury（Ⅱ） ion

The reaction of 1,3-dipropyn-2-yloxycalix[4]arene with mercury(II)acetate could give mercury-containing alkynyl calixarenepolymer.The extraction behavior of 1,3-dipropyn-2-yl-oxycalix[4]arene towards mercury(II)ion was examined.When the moleratio of Hg~(2 )/calixarene was 1:1,the extractive percent can reach to 99.1%,and the extraction capacity was up to 431 mg/g.It couldalso decrease the Hg~(2 )concentration from 5 to 0.85 mg/L,which was only 17%of the national standard of effluent and satisfied thenational standard of drinking water.The extraction process included chemical reaction.     

纳米微晶Y_2Sn_(2-x)FexO_(7-δ)的制备及其催化选择性能研究

采用共沉淀并加法制备了Ｂ位掺杂烧绿石型稀土复合氧化物纳米微晶Ｙ２Ｓｎ２－ｘＦｅｘＯ７－δ（ｘ＝００～１０）。制备的纳米微晶属于立方晶系，Ｆｄ３ｍ，晶胞参数与掺杂量呈线性关系。通过Ｍｓｂａｕｅｒ、ＴＧＤＴＡ，气相色谱和γ射线辐照等技术研究了纳米微晶对ＣＯ的催化选择性能。结果表明，纳米微晶对ＣＯ的催化选择性明显高于一般粉料对ＣＯ的选择性；纳米微晶对ＣＯ的选择性与掺杂量有关；未辐照的纳米微晶，当掺杂量ｘ＝０６时，其对ＣＯ的选择性为最高，辐照后的纳米微晶，当掺杂量ｘ＝０４时，其对ＣＯ的选择性为最高