Thermal characterization of new complexes of Zn(II) and Cd(II) with some bipyridine isomers and propionates

New mixed ligand complexes of the following stoichiometric formulae: M(2-bpy)₂(RCOO)₂·nH₂O, M(4-bpy)(RCOO)₂·H₂O and M(2,4’-bpy)₂(RCOO)₂·H₂O (where M(II)=Zn, Cd; 2-bpy=2,2’-bipyridine, 4-bpy=4,4′-bipyridine, 2,4′-bpy=2,4′-bipyridine; R=C₂H₅; n=2 or 4) were prepared in pure solid-state. These complexes were characterized by chemical and elemental analysis, IR and conductivity studies. Thermal behaviour of compounds was studied by means of DTA, DTG, TG techniques under static conditions in air. The final products of pyrolysis of Cd(II) and Zn(II) compounds were metal oxides MO. A coupled TG/MS system was used to analyse of principal volatile products of thermal decomposition or fragmentation of Zn(4-bpy)(RCOO)2·H2O under dynamic air and argon atmosphere. The principal species correspond to: C⁺, CH⁺, CH₃ ⁺, C₂H₂ ⁺, HCN⁺, C₂H₅ ⁺ or CHO⁺, CH₂O⁺ or NO⁺, CO₂ ⁺, ¹³C¹⁶O₂ ⁺ and ¹²C¹⁶O¹⁸O⁺ and others; additionally CO⁺ in argon atmosphere.     

Ionic liquid functionalized polylactide by cationic polymerization: Synthesis and stabilization of carbon nanotube suspensions

Medium molecular weight poly(L ,L ‐lactide)s (PLA) containing at one chain end ionic group derived from imidazolium ionic liquid (IL) were synthesized by cationic polymerization using hydroxylated IL as initiator. matrix assisted laser desorption/ionization time‐of‐flight analysis confirmed the structure of products (PLA‐IL). Carbon nanotubes (CNT) were dispersed in solution of PLA‐IL in 1,4‐dioxane and significant improvement of stability of suspension was observed by measurements of suspension absorbance. Similar effect was, however, observed also for solutions of PLA which did not contain terminal IL group. CNT samples treated with PLA‐IL and PLA were isolated, thoroughly washed with 1,4‐dioxane and stability of suspensions was again measured. Sample treated with PLA after washing behave similarly to untreated CNT. Stability of suspension of CNT treated with PLA‐IL after washing was considerably higher than that of untreated CNT and the presence of polymer bound to CNT was clearly detectable in scanning electron microscopy images. Results indicate that there is indeed an interaction between end‐group derived from IL and CNT surface as postulated earlier but to observe solely this effect an excess of polymer should be removed, otherwise factors such as increase of viscosity of solution or weak interactions of PLA ester groups with CNT may obscure results. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Optical acetylcholine sensor based on free base porphyrin as a chromoionophore

In this work, the possibility of application of free base porphyrin as a lipophilic pH chromoionophore for the preparation of optical cation-selective sensors was investigated. The properties of polymeric membranes, containing porphyrins of different structures, namely tetraphenylporphyrin (TPP) and octaethylporphyrin (OEP), were compared. Changes in equilibrium between protonated and deprotonated form of porphyrin, resulting from variations in ACh concentration, were evaluated. The influence of various factors (kind and quantity of anionic additive and porphyrin in the membrane phase, pH of sample solution) on initial equilibrium was studied. The best membrane composition was chosen as: TPP 3 wt.%, KTFPB 175 mol.% relative to ionophore, PVC:o-NPOE (1 : 4) and measuring buffer solution: 0.05 M MES, pH 4.5. Selectivity, response stability, reversibility and repeatability tests were carried out for chosen sensor. Developed sensor allowed for the determination of a model analyte, acetylcholine, at the concentration range of 10(-5) to 10(-2) M, both in stationary and flow-injection system. Sensor response was reversible and repeatable in the mentioned concentration range.     

ESR study of γ-irradiated 1,3,5-trithiane and its derivatives

Radicals formed in γ-irradiated 1,3,5-trithiane and its derivatives at room temperature have been studied by ESR spectroscopy. ESR evidence establishes that 1,3,5-trithiane as well as α- and β-2,4,6-trimethyl-1,3,5-trithiane yield radicals mainly by loss of the hydrogen atom, whereas α- and β-2,4,6-triphenyl-1,3,5-trithiane and 2,4,6-trimethyl-2,4,6-triphenyl-1,3,5-trithiane produce radicals that are parent radical cations, which are also present in small amounts in aliphatic trithianes. Furthermore, in all the spectra examined R–S^.-type radicals are observed. The probable initiation process of radiation-induced 1,3,5-trithiane polymerization is discussed briefly.     

Study of sulphur in oxidised coals by atmospheric pressure-temperature programmed reduction

The influence of oxidation of coal, performed with different oxidising agents, on the sulphur species was studied. Conversions of the sulphur species were investigated by the Atmospheric Pressure-Temperature Programmed Reduction method (AP-TPR). The removal of pyrite proved to be advantageous for AP-TPR analysis. It was found that non-thiophene sulphur species undergo easier oxidation by different agent then thiophenic structures.This revised version was published online in November 2005 with corrections to the Cover Date.     

The effect of chemical activation method on properties of activated carbons obtained from pine cones

A method for obtaining carbonaceous adsorbents from pine cones by chemical activation with NaOH is described. Activated carbons were obtained by two methods of activation (physical mixing and impregnation) and two variants of thermal treatment. It has been shown that pine cones can be successfully used as cheap precursor of carbonaceous adsorbents of well-developed surface area, large pore volume and good sorption properties. All activated carbon samples obtained show strongly microporous structure and surface of acidic character. The best physicochemical properties and greatest sorption capacity towards iodine were found for the carbon samples obtained by physical mixing of the precursor with the activating agent and then subjected to thermal activation at 600°C.     

Unusually highly efficient,singlet state,visible light photoinitiators based on styrylbenzimidazolium phenyltributylborate photoredox pairs for vinyl monomers free radical polymerization

In this article, hemicyanine dye–borate complexes, for example, 1,3‐dimethyl‐2‐[4‐(N,N‐dialkylamino)styryl]benzimidazolium phenyl‐tri‐n‐butylborates, were employed as the novel, very effective photoinitiators operating in the visible light region. The influence of the sensitizers and electron donor structure on the photopolymerization kinetics of multiacrylate monomer was investigated by photo‐DSC. The maximum photopolymerization quantum yield measured for 2‐ethyl‐2‐(hydroxymethyl)‐1,3‐propanediol triacrylate (TMPTA) was about 67 for sample of thickness of about 1 mm under 100 mW/cm² laser irradiation. It was found that the polymerization rate and the final conversion degree were depended on the dye structure. Moreover, the photoinitiating systems described gave a double bond conversion higher than the photoinitiator possessing as chromophore RBAX (Rose Bengal derivative), the common triplet state initiator. Additionally, the rate of photopolymerization depends on ΔG_el of electron transfer between borate anion and styrylbenzimidazolium cation. This latter value was estimated for a series of styrylbenzimidazolium borate salts. The relationship between the rate of polymerization and the free energy of activation for electron transfer reaction gives the dependence predicted by the classical theory of electron transfer. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4119–4129, 2009     

Estimation and correction of the influence of an IR spectometer on mechanical vibrations

The problem of influence of mechanical vibrations on a measurement is well known and analyzed for ground conditions. However, the problem becomes quite essential and difficult to solve in space conditions. The influence of vibrations on accuracy of the measurement was observed on MIPAS – ENVISAT and in PFS Mars Express.This paper presents an experimental and theoretical investigation on sensitivity to mechanical disturbances of the Fourier-transform infrared spectrometer PFS.A theoretical analysis has been performed in order to highlight the expected effect of the vibration, then laboratory tests have been designed and carried out for instrument characterization.The theoretical investigation has been confirmed by experimental tests.The data were distorted by errors that reflect the influence of vibrations on the instrument and temperature instability of the reference source.The considerations are a perfect example presenting the scale of vibrations problem and the instability of the reference source in assessing accuracy of the measurement in space.     

Developing of Fluorescence Probes Based on Stilbazolium Salts for Monitoring Free Radical Polymerization Processes. II

The series of 1-methyl-4-(4-aminostyryl)pyridinium perchlorates was investigated as fluorescent probes for the monitoring of the free radical polymerization progress. The study on the changes in fluorescence intensity and spectroscopic shifts of studied compounds were carried out during thermally initiated polymerization of methyl methacrylate. The purpose of these studies was to find a relationship between the structure of fluorophore and the changes in their fluorescence shape and intensity observed during the monomer conversion into polymer. The probes under the study during the course of polymerization increase their fluorescence intensity at least one order of magnitude. Such increase qualified the tested probes as good fluorescence probes.