An NMR-Based Approach to the Measurement of High Log K HL Values at Low Ionic Strength. 31P NMR Study of 1,2-Diaminoethane-N,N,N′,N′-tetra(methylenephosphonic Acid) Protonation Equilibrium at pH > 12

A sequential NMR based approach is proposed for measurements of high log K values at low ionic strength. [³¹P] NMR technique is used to determine the protonation constants of 1,2-diaminoethane-N,N,N,N-tetra(methylenephosphonic acid) (EDTPH, H₈L) at 25°C in 0.1 mol-dm^–3 KNO₃ and at 37°C in 0.15 mol-dm^–3 NaCl at pH 11–14. For equilibrium L + H HL log K are found to be 13.3 (0.1) and 12.9 (0.1), respectively.     

Total stepwise solid-phase synthesis of oligonucleotide-(3'-->N)-peptide conjugates

[structure: see text] An efficient total stepwise solid-phase synthesis of oligonucleotide-(3'-->N)-peptide conjugates is described that makes use of either a controlled pore glass support or macroporous polystyrene beads. Extending our previous homoserine linker approach, we prepared a range of conjugates containing one of four different cell or nuclear penetration peptides together with oligonucleotides containing 2'-deoxynucleoside or 2'-O-methylribonucleoside phosphodiesters, or gapmers containing 2'-deoxyphosphorothioates. The route also allows incorporation of a fluorescent label within the conjugate for cell uptake studies.     

Geometry changes of a Cu(I) phenanthroline complex on photoexcitation in a confining medium by time-resolved X-ray diffraction

Using a stroboscopic technique, in which the molecule is repeatedly excited and the structural change is probed more than 5000 times per second immediately after excitation, we performed a 16 K time-resolved single-crystal study of the microsecond lifetime triplet state of the Cu(I)phenanthroline derivative[Cu(I)(dmp)(dppe)][PF6] (dppe = 1,2-bis(diphenylphosphino)ethane). The geometry changes on excitation differ for the two symmetry-independent molecules, but are in the same direction as calculated for an isolated reference molecule, although the flattening distortion in the crystal is significantly smaller, implying that the reorganization energy is greatly affected by the confining medium.     

The first photocrystallographic evidence for light-induced metastable linkage isomers of ruthenium sulfur dioxide complexes

Light-induced metastable linkage isomers of trans-[Ru(NH(3))(4)Cl(SO(2))]Cl and trans-[Ru(NH(3))(4)(H(2)O)(SO(2))](C(6)H(5)SO(3))(2) have been identified for the first time using photocrystallographic methods. In both linkage isomers the SO(2) ligand is side bound, but the Ru-O and Ru-S distances are considerably longer and almost equal in the trans-H(2)O isomer. DFT calculations confirm that both isomers correspond to minima on the ground-state potential energy surface and also predict the existence of a second oxygen-bound isomer for both compounds. The decay of the light-induced species has been studied by both DSC and IR. Activation energies for the thermal back-reaction, as derived from the temperature-dependent disappearance of light-induced IR bands, are 50.0 and 58.4 kJ/mol for the two isomers, which is larger than the corresponding numbers for photoinduced side-bound nitrosyl linkage isomers.     

Synthesis of Functionalized o‐, m‐, and p‐Terphenyl Derivatives by Consecutive Cross‐Coupling Reactions of Triazene‐Substituted Arylboronic Esters

Triazene‐substituted arylboronic esters were prepared readily from the corresponding aryl magnesium derivatives and shown to function as a new class of donor–acceptor‐substituted coupling reagents. The selective functionalization of these aromatic derivatives led to a wide variety of terphenyl derivatives in which the original bifunctional unit (often further substituted with another functional group) formed the central aromatic ring. The functionalized terphenyl derivatives were formed in two efficient cross‐coupling steps from the triazene‐substituted boronic esters: Suzuki cross‐coupling with an aryl halide was followed by BF₃?OEt₂‐induced palladium‐catalyzed coupling of the diazonium salt generated in situ from the triazene with an arylboronic acid.     

Micellization and catalytic activity of the cetyltrimethylammonium bromide-Brij 97-water mixed micellar system

Surface tension measurements and the kinetic study of the basic hydrolysis of ethyl p-nitrophenyl chloromethyl phosphonate were used to examine the structural behavior and catalytic activity of the cethyltrimethylammonium bromide (CTAB)-polyoxyethylene (10) oleyl ether, C(18)H(35)(OCH(2)CH(2))(10)OH (Brij 97)-water mixed micellar system. Application of the regular solution model to the experimental data yields the value of the interaction parameter beta as -4.6, which indicates an attractive interaction of the surfactants in the mixed micelle and reflects synergistic solution behavior of the mixture. The mixed micellar composition is found to be enriched in the surfactant with the lower critical micelle concentration (cmc). In the kinetic study a nonmonotonic change in the pseudo-first-order rate constant of basic hydrolysis of the substrate is observed with increasing mole fraction of nonionic surfactant. The pseudophase micellar model reveals that the concentration factor mainly contributes to the catalytic effect, while the microenvironmental factor plays a negative role.     

An evaluation of analytical techniques for determination of lead, cadmium, chromium, and mercury in food-packaging materials

Closed microwave digestion and a high-pressure asher have been evaluated for wet-oxidation and extraction of lead, cadmium, chromium, and mercury from a range of typical packaging materials used for food products. For the high-pressure asher a combination of nitric and sulfuric acids was efficient for destruction of a range of packaging materials; for polystyrene, however, nitric acid alone was more efficient. For microwave digestion, a reagent containing nitric acid, sulfuric acid, and hydrogen peroxide was used for all materials except polystyrene. Use of the high-pressure asher resulted in the highest recoveries of spiked lead (median 92%), cadmium (median 92%), chromium (median 97%), and mercury (median 83%). All samples were spiked before digestion with 40 microg L(-1) Cd, Cr, and Pb and 8 microg L(-1) Hg in solution. The use of indium as internal standard improved the accuracy of results from both ICP-MS and ICP-AES. Average recovery of the four elements from spiked packaging materials was 92 +/- 14% by ICP-MS and 87 +/- 15% (except for mercury) by ICP-AES. For mercury analysis by CVAAS, use of tin(II) chloride as reducing agent resulted in considerably better accuracy than use of sodium borohydride reagent.     

Hydration and dielectric properties of aqueous solutions of protonated diallylmethylammonium polymer: transition from monomer to polymer

Abstract

The high-frequency dielectric relaxation of aqueous solutions of protonated diallylammonium polyelectrolyte, namely poly(diallylmethylammonium trifluoroacetate) has been studied at the maximum water dispersion frequencies, 7.5–25?GHz, and temperatures of 288, 298, and 308?K. Dielectric relaxation parameters have been calculated and compared with similar characteristics of aqueous solutions of monomer, diallylmethylammonium trifluoroacetate, and pyrrolidinium trifluoroacetate salt simulated structure of pyrrolidinium polymer link. It has been concluded that although the monomer features hydrophobic hydration, its polymer exhibits hydrophilic hydration properties. This change is related to conformation of hydrophilic-hydrophobic polycations in aqueous solutions and the change in the structure of polymer links.     

Synthesis and use of alpha-silyl-substituted alpha-hydroxyacetic acids

[reaction: see text] Rhodium-catalyzed oxygen transfer was used to generate benzyl 2-silyl-2-oxoacetates in good yields. The hydrogenation of these compounds led to chiral alpha-silyl-substituted alpha-hydroxyacetic acids. Resolution by means of HPLC using a chiral stationary phase afforded an enantiomerically pure representative of this class of compounds, which was successfully applied as a chiral ligand in an asymmetric aldol-type reaction.     

In situ determination of orientational distributions in Langmuir monolayers by total internal reflection fluorescence

A new application of the polarized total internal reflection fluorescence (PTIRF) technique to study the orientation distribution of a fluorophore within a Langmuir monolayer in situ on an aqueous subphase is described. The technique utilizes the measurement of polarized fluorescence, excited by the evanescent field appearing upon total internal reflection. The excitation by the evanescent field is achieved by launching the beam into a prism that is brought into contact with the monolayer from above. We also show here that a combination of PTIRF of monolayers on water and those freshly deposited onto the prism by horizontal lift in the same experiment provide enough data to determine the dielectric constant of the actual local environment of the fluorophore in the monolayer to eliminate the ambiguity of the orientation determination, arising from uncertainty in the normal component of excitation field. The new technique was applied to several model systems: fatty acid monolayers containing amphiphilic dyes DiI or BODIPY and also a monolayer of a synthetic amphiphilic porphyrin-binding peptide AP0. This technique is more accurate than polarized epifluorescence (PEF) in determining the fluorophore orientation distribution due to the much higher normal component of the excitation, achievable in the evanescent field, and to the lack of surface vibrations caused by capillary waves. Comparison of the new PTIRF approach with PEF shows that the monolayer structure is not disturbed by weak van der Waals attachment to the hydrophobic substrate.