Synthesis of a transition metal-dithionite complex, (η5-C5H5)(CO)2FeS(O)2S(O)2Fe(CO)2(η5-C5H5)

The reaction of Na[η⁵-C₅H₅Fe(CO)₂] with large excess of SO₂ in THF at ?78°C followed by warming to room temperature affords an iron—dithionite complex, (η⁵-C₅H₅)(CO)₂FeS(O)₂S(O)₂Fe(CO)₂(η⁵-C₅H₅).     

Synthesis of substituted 3-amino[6,5-b]triazinoindoles

4-[(9-Methyl-as-triazino[6,5-b]indol-3-yl)amino]-2-methyl-2-butanol ( 13 ) and the corresponding 2-methyl-3-imino derivative 12 were synthesized and tested in vitro against Rhino 2 virus. The two compounds were more active than the known triazino[5,6-b]indole 4 . 2,9-Dimethyl-3-methoxy-9H-as-triazino[6,5-b]indolium tosylate ( 21 ) and the related 3-methylthio compound 9 were prepared. Quaternary 21 formed a pseudo base, 22a , whereas quaternary 9 did not form a pseudo base.     

PROPERTIES OF THE ULTRAVIOLET-LIGHT-MEDIATED BINDING OF BOVINE SERUM ALBUMIN TO DNA*

Abstract— The binding of DNA to protein mediated by U V (254 nm) radiation has been investigated using binding of the complex to Millipore membrane filters as an assay technique. The reaction proceeds through an activated protein intermediate which then reacts with the DNA. The activated protein has a half-life of about 75 min at 0°C and about 18 min at 37°C. Short wavelengths are more efficient in forming the complex than wavelengths in the 250–280 nm range. N-ethyl maleimide treatment of protein before irradiation markedly inhibits the reaction.     

The [2 + 4] Diels-Alder cycloadditon product of a probable dialuminene,Ar'AlAlAr' (Ar' = C(6)H(3)- 2,6-dipp(2); dipp = C(6)H(3)-2,6-Pr(i)(2)), with toluene

Reduction of Ar'AlI2 (Ar' = Ar'= C6H3-2,6-Dipp2; Dipp = C6H3-2,6-Pri2) with KC8 in diethyl ether most probably affords the first "dialuminene", Ar'AlAlAr'; it was characterized by its reaction with toluene which yielded a [2 + 4] cycloaddition product incorporating the Ar'AlAlAr' unit.     

Quantum chemical modeling for 157 nm photolithography

In its continuing quest for smaller length scales, the electronics industry plans to introduce 157 nm as the next lithographic wavelength. Accordingly, there is a pressing need to develop photoresists that are more transparent, and pellicles that are both more transparent and more durable. With the advent and popularization of time-dependent density functional theory (TD-DFT), we now have a practical quantum chemical method for calculating excitation energies and transition moments in the vacuum ultraviolet (VUV) which can greatly assist in the scouting of highly transparent materials. We have performed TD-DFT calculations for a broad variety of fluorinated molecules and we will report calculated VUV photoabsorption spectra for a large family of model fluorohexanes. These calculations, which span a range from 1-fluorohexane to CH₃CF₂CF₂CF₂CF₂CH₃, illustrate some of the principles one may use to design low absorption polymeric materials.     

Cluster Build-up Reactions using Di-gold Cationic Fragments: Synthesis and Structural Characterization of [Os7(CO)19(Au2dppm)]

The reaction of the di-gold cation [Au₂(dppx)]²⁺ with the heptanuclear cluster dianion [Os₇(CO)₂₀]^2– affords the mixed metal cluster [Os₇(CO)₂₀{Au₂(dppx)}] (x=m (1), e (2), b (3)). On standing, in solution, this complex undergoes decarbonylation to give the cluster [Os₇(CO)₁₉{Au₂(dppx)}] (x=m (4), e (5), b (6)). The complexes have been characterised spectroscopically, and an X-ray structure determination of the dppm derivative shows that it contains a metal core based on an Os₇ edge-bridged bicapped tetrahedron with the two ₃-Au atoms capping adjacent triangular Os₃ faces of the central tetrahedron. In an analogous reaction, the carbido anion [Os₇(H)C(CO)₁₉]^– affords the neutral cluster [Os₇C(CO)₁₉{Au₂(dppm)}] (7) when treated with [Au₂(dppm)]²⁺ in the presence of base.     

A stereoelectronic effect on turn formation due to proline substitution in elastin-mimetic polypeptides

Stereoelectronic effects have been identified as contributing factors to the conformational stability of collagen-mimetic peptide sequences. To assess the relevance of these factors within other protein structural contexts, three polypeptide sequences were prepared in which the sequences were derived from the canonical repeat unit (Val-Pro-Gly-Val-Gly) of the protein material elastin. These elastin-mimetic polypeptides, elastin-1, elastin-2, and elastin-3, incorporate (2S)-proline, (2S,4S)-4-fluoroproline, and (2S,4R)-4-fluoroproline, respectively, at the second position of the elastin repeat. Calorimetric and spectroscopic investigations of these three polypeptides indicate that the incorporation of the substituted proline residues had a dramatic effect upon the self-assembly of the corresponding elastin peptide. The presence of (2S,4R)-4-fluoroproline in elastin-3 lowered the temperature of the phase transition and increased the type II beta-turn population with respect to the parent polypeptide, while the presence of (2S,4S)-4-fluoroproline in elastin-2 had the opposite effect. These results suggest that stereoelectronic effects could either enhance or hinder the self-assembly of elastin-mimetic polypeptides, depending on the influence of the proline analogue on the energetics of the beta-turn conformation that develops within the pentapeptide structural repeats above the phase transition. Density functional theory (DFT) was employed to model three possible turn types (betaI-, betaII-, and inverse gamma-turns) derived from model peptide segments (MeCO-Xaa-Gly-NHMe) (Xaa = Pro, 4S-F-Pro, or 4R-F-Pro) corresponding to the turn-forming residues of the elastin repeat unit (Val-Pro-Gly-Val-Gly). The results of the these calculations suggested a similar outcome to the experimental data for the elastin-mimetic polypeptides, in that type II beta-turn structures were stabilized for peptide segments containing (2S,4R)-fluoroproline and destabilized for segments containing (2S,4S)-fluoroproline relative to the canonical proline residue.     

The Reactivity of Bis(para‐methoxyphenyl)telluroxide towards Triflic Acid and Diphenylphosphinic Acid. Theoretical Considerations of the Protonation and Hydration Process of Diorganotelluroxanes

The reaction of (p‐MeOC₆H₄)₂TeO with two equivalents of HO₃SCF₃ and HO₂PPh₂ provided the tetraorganoditelluroxanes (F₃CSO₃)(p‐MeOC₆H₄)₂TeOTe(p‐MeOC₆H₄)₂(O₃SCF₃) ( 1 ) and (Ph₂PO₂)(p‐MeOC₆H₄)₂TeOTe(p‐MeOC₆H₄)₂(O₂PPh₂)·2 Ph₂PO₂H ( 2 ) in good yields. Compounds 1 and 2 were characterized by solution and solid‐state ³¹P and ¹²⁵Te NMR spectroscopy, IR spectroscopy, electrospray mass spectrometry, conductivity measurements and single crystal X‐ray diffraction. In solution, compound 1 undergoes an electrolytic dissociation and reversibly reacts with traces of water to give the mononuclear cation [(p‐MeOC₆H₄)₂TeOH]⁺ and triflate anions. Theoretical aspects of the protonation and hydration of model telluroxanes R₂TeO (R = H, Me, Ph) were investigated by preliminary DFT calculations and compared to the corresponding selenoxanes R₂SeO. The tellurium dihydroxides R₂Te(OH)₂ seem to be more stable than the hydrogen‐bonded complexes R₂TeO·H₂O.     

Diastereoselective intermolecular rhodium-catalyzed [4 + 2 + 2] carbocyclization reactions: computational and experimental evidence for the intermediacy of an alternative metallacycle intermediate

Intermolecular rhodium-catalyzed [m + n + o] reactions of 1,6-enynes and various pi-components (carbon monoxide, alkynes, 1,3-butadienes, etc.) provide an expeditious approach for the construction of polycyclic fragments that represent important synthons for target-directed synthesis. We present computational and experimental evidence for the existence of a previously undescribed reaction pathway for the rhodium-catalyzed [4 + 2 + 2] reaction involving a 1,6-enyne. This model clearly demonstrates the origin of the excellent diastereoselectivity in this type of reaction and the remarkable tolerance of both (E)- and (Z)-isomers within the 1,6-enyne, which is generally prone to competitive ene-cycloisomerization.     

The synthesis of novel polycyclic heterocyclic ring systems via photocyclization. 11. Synthesis and total assignment of the 1H and 13C NMR spectra of isomeric benzothienonaphthoquinolines using multiple inverse detected two-dimensional NMR methods

Two novel heterocyclic ring systems, namely, [1]benzothieno[2,3-c]naphtho[1,2-f]quinoline and [1]benzothieno[2,3-c]naphtho[2,1-g]quinoline have been synthesized and characterized by inverse detected two-dimensional nmr methods. Unequivocal total assignments of the proton and carbon nmr spectra were made through the concerted utilization of HMQC (Heteronuclear Multiple Quantum Correlation) and a combination of HMBC (Heteronuclear Multiple Bond Correlation) and HMQC-TOCSY (HMQC with proton TOtal Correlation Spectroscopy).