The mechanism of photoinduced acylation of amines by N-acyl-5,7-dinitroindoline as determined by time-resolved infrared spectroscopy

[reaction: see text] The photochemistry of N-acyl-5,7-dinitroindoline (1) was studied in acetonitrile using nanosecond time-resolved infrared (TRIR) spectroscopy. Upon photolysis, two nearly but not completely overlapping sets of transient IR bands are observed that are assigned to two non-interconvertible conformers of mixed acetic nitronic anhydride 7. While syn-7 reverts rapidly to 1, anti-7 is long-lived and is able to acylate amines. Results of density functional theory calculations support conclusions based on experimental TRIR data.     

Inorganic-organic hybrids of the p,p′-diphenylmethylenediphosphinate ligand with bivalent metals: a new 2D-layered phenylphosphinate zinc(II) complex

By reaction of Zn(CH₃COO)₂ with p,p′-diphenylmethylenediphosphinic acid in water a new inorganic-organic polymeric hybrid of formula [Zn(CH₂(P(Ph)O₂)₂)] has been synthesized and completely characterized. The X-ray analysis established that the structure consists of 2D-layered polymeric array, the 2D-sheets being built up through strong covalent linkages between the zinc metal and the oxygen donors of the phenylphosphinate ligand. The 2D-layers, which are featuring a mesh-net fashion, present voids of various dimensionality, up to 24-membered rings. The organic parts of the hybrid ligand, namely the phenyl rings, are shielding the inorganic skeleton of the layers, preventing the propagation of the polymer in the third dimension. No water molecules are present in the lattice, both of coordination and crystallization. Crystal data are: monoclinic, P2₁/c, a=11.840(2), b=9.646(9), c=12.516(5) Å, β=95.03(2), V=1423.9(15) Å³, Z=4. The solid material has been characterized by ³¹P MAS NMR spectroscopy and thermogravimetric analysis.     

High resolution protein separations using affinity ultrafiltration with small charged ligands

Although the feasibility of affinity ultrafiltration was demonstrated more than 20 years ago, commercial applications have not developed due to the high cost and practical limitations of the large macroligands needed for highly selective separations. The objective of this study was to examine the use of small charged affinity ligands for protein purification by exploiting electrostatic interactions between the charged complex and an electrically-charged membrane. Experiments were performed using bovine serum albumin and ovalbumin with Cibacron Blue as the affinity ligand. Negatively charged versions of a composite regenerated cellulose membrane were generated by covalent attachment of a sulfonic acid functionality. Binding experiments were used to identify appropriate conditions for protein separations. The selectivity for the separation of BSA and ovalbumin was a function of the solution conditions, Cibacron Blue concentration, and membrane charge, with the addition of Cibacron Blue causing a 30-fold increase in selectivity. A diafiltration process was performed at the optimal conditions, giving a BSA product with a purification factor of more than 90-fold and a yield greater than 90%. These results clearly demonstrate the potential of using a small charged affinity ligand for high resolution protein separations.     

High-throughput purification of combinatorial libraries I: a high-throughput purification system using an accelerated retention window approach

We have developed a high-throughput purification system to purify combinatorial libraries at a 50-100-mg scale with a throughput of 250 samples/instrument/day. We applied an accelerated retention window method to shorten the purification time and targeted one fraction per injection to simplify data tracking, lower QC workload, and simplify the postpurification processing. First, we determined the accurate retention time and peak height for all compounds using an eight-channel parallel LC/UV/MS system, and calculated the specific preparative HPLC conditions for individual compounds. The preparative HPLC conditions include the compound-specific gradient segment for individual compounds with a fixed gradient slope and the compound-specific UV or ELSD threshold for triggering a fraction collection device. A unique solvent composition or solvent strength was programmed for each compound in the preparative HPLC in order to elute all compounds at the same target time. Considering the possible deviation of the predicted retention time, a 1-min window around the target time was set to collect peaks above a threshold based on UV or ELSD detection. Dual column preparative instruments were used to maximize throughput. We have purified more than 500 000 druglike compounds using this system in the past 3 years. We report various components of this high-throughput purification system and some of our purification results.     

An ESR study of some group IVB free radical adducts of diethylketomalonate

The formation of the compound RSnX(acac)₂ (acac = 2,4-pentanedionato) by reaction of bis(2,4-pentanedionato)tin(II) on a halide RX with R = CH₃, C₂H₅, C₄H₉, C₆H₅, CH₂I, (C₆H₅)₃SnCH₂, (C₂H₅)₃SnCH₂ and X = I, Br has been studied by polarography. At 25°C, it is in fact an equilibrium whose constant has been measured. The intermediate formation of the ion-pair [RSn(acac)₂⁺X^?] has allowed us to explain the experimental results.     

Direct quantitative analysis of peptides using matrix assisted laser desorption ionization

The protocol and various matrices were examined for quantification of biomolecules in both the low ca. 1200 amu and mid mass 6000-12000 amu ranges using an internal standard. Comparative studies of different matrices of MALDI quantitative analysis showed that the best accuracy and standard curve linearity were obtained for two matrices: (a) 2,5-dihydroxybenzoic acid (DHB) combined with a comatrix of fucose and 5-methoxysalicylic acid (MSA) and (b) ferulic acid/fucose. In the low mass range, the quantitative limit was in the 30 fmol range and in the mid mass range the quantitative limit was in the 250 fmol range. Linear response was observed over 2-3 decades of analyte concentration. The relative error of the standard curve slope was 1.3-1.8% with correlation coefficients of 0.996-0.998.The main problem for quantitative measurement was suppression of the signal of the less concentrated component (analyte or internal standard) by the more concentrated component. The effect was identified with saturation of the matrix by the analyte. The threshold of matrix saturation was found to be in the range of 1/(3000-5000) analyte/matrix molar ratio. To avoid matrix saturation the (analyte+internal standard) to matrix molar ratio should be below this threshold. Thus the internal standard concentration should be as low as possible.DHB/MSA/fucose and ferulic acid/fucose matrices demonstrated good accuracy and linearity for standard curves even when the internal standard had chemical properties different from the analyte. However, use of an internal standard with different chemical properties requires highly stable instrumental parameters as well as constant (analyte+internal standard)/matrix molar ratio for all samples.     

Structures and synthesis of framework Rb and Cs uranyl arsenates and their relationships with their phosphate analogues

Two hydrated uranyl arsenates, Cs₂(UO₂)[(UO₂)(AsO₄)]₄(H₂O)₂ (CsUAs) and Rb₂(UO₂)[(UO₂)(AsO₄)]₄(H₂O)_4.5 (RbUAs), were synthesized by hydrothermal methods. Intensity data were collected at room temperature using MoKα radiation and a CCD-based area detector. The crystal structure of RbUAs was solved by direct methods, whereas the structure model of the phosphate Cs₂(UO₂)[(UO₂)(PO₄)]₄(H₂O)₂ was used for CsUAs; both were refined by full-matrix least-squares techniques on the basis of F² to agreement indices (CsUAs, RbUAs) wR₂=0.061,0.041, for all data, and R₁=0.032,0.021, calculated for 5098, 4991 unique observed reflections (|F_o|>4σ_F), respectively. The compound CsUAs is orthorhombic, space group Cmc2₁, Z=4, a=15.157(2), b=14.079(2), c=13.439(2) Å, V=2867.9(1) Å³. RbUAs is monoclinic, space group C2/m, Z=4, a=13.4619(4), b=15.8463(5), c=14.0068(4) Å, β=92.311(1)°, V=2985.52(2) Å³. The structures consist of sheets of arsenate tetrahedra and uranyl pentagonal bipyramids, with composition [(UO₂)(AsO₄)]⁻, that are topologically identical to the uranyl silicate sheets in uranophane-beta. These sheets are connected by a uranyl pentagonal bipyramid in the interlayer that shares corners with two arsenate tetrahedra on each of two adjacent sheets and whose fifth equatorial vertex is an H₂O group, resulting in an open framework with alkali metal cations in the larger cavities of the structures. CsUAs is isostructural with its phosphate analogue, and has two Cs atoms and a H₂O group in its structural cavities. RbUAs is not isostructural with its phosphate analogue, although it has a homeotypic framework. Its structural cavities are occupied by three Rb atoms and four H₂O groups; one Rb position and three of the interstitial H₂O groups are half-occupied. The partial occupancies of these positions probably result from the accommodation of the larger As atoms (relative to P) in the framework and resultant larger cavities.     

Methylmethacrylate complexes of sterically hindered aluminum aryloxides: activation of methacrylic esters

The interaction of AlR₂(BHT)(OEt₂) and AlMe(BHT)₂ with methylmethacrylate (MMA) leads to the formation of the Lewis acid-base complexes AlR₂(BHT)(MMA) [R = Me (1), Et (2)] and AlMe-(BHT)₂(MMA) (3), respectively. The molecular structure of 1 has been determined by X-ray crystallography. The decrease in the C=O and C=C stretching frequencies in the IR spectrum, and downfield shift in the ¹³C NMR spectrum of the - and γ-carbons of the MMA, when compared to free MMA, is presented with respect to the activator ability of sterically crowded aryloxide compounds of aluminum to aluminum-porphyrin catalyzed (Inoue) polymerization of MMA.