Reactions of organomercury fulminates with acetylene derivatives

Organomercury fulminates react with acetylene derivatives to give unstable 3-(organomercurio)isoxazoles, which isomerize to 2-cyanoenolates. These are hydrolyzed with hydrochloric acid to the corresponding enols and are cleaved by water at the double bond. With monosubstituted acetylenes, substitution at the free position by the organomercury residue is predominant.     

Accreditation of reference material producers: the example of IRMM's Reference Materials Unit

The potential approaches for third-party assessment of reference material producers are revisited and the activities of the Reference Materials (RM) Unit of the Institute for Reference Materials and Measurements (IRMM) to obtain accreditation to ISO Guide 34 and ISO 17025 are described. Accreditation was related to the Unit as all matrix RM activities of the institute are concentrated there. A management system was established that allows sufficient flexibility to be applicable to a wide range of RMs while being precise enough to ensure compliance with ISO Guides 30, 31 and especially 34 and 35. Accreditation was achieved in 2004 with independent scopes for testing and RM production and was confirmed and extended in 2005. The key aspects of the RM Unit's management system for RM production are presented. Presented at BERM-10, April 2006, Charleston, SC, USA     

Development and application of an integrated system for monitoring ethanol content of fuels

An automated flow injection analysis (FIA) system for quantifying ethanol was developed using alcohol oxidase, horseradish peroxidase, 4-aminophenazone, and phenol. A colorimetric detection method was developed using two different methods of analysis, with free and immobilized enzymes. The system with free enzymes permitted analysis of standard ethanol solution in a range of 0.05–1.0 g of ethanol/L without external dilution, a sampling frequency of 15 analyses/h, and relative SD of 3.5%. A new system was designed consisting of a microreactor with a 0.91-mL internal volume filled with alcohol oxidase immobilized on glass beads and an addition of free peroxidase, adapted in an FIA line, for continued reuse. This integrated biosensor-FIA system is being used for quality control of biofuels, gasohol, and hydrated ethanol. The FIA system integrated with the microreactor showed a calibration curve in the range of 0.05–1.5 g of ethanol/L, and good results were obtained compared with the ethanol content measured by high-performance liquid chromatography and gas chromatography standard methods.     

Oligonucleotide Analogues with Integrated Bases and Backbone. Part 14

The self‐complementary tetrameric propargyl triols 8, 14, 18 , and 21 were synthesized to investigate the duplex formation of self‐complementary, ethynylene‐linked UUAA, AAUU, UAUA, and AUAU analogues with integrated bases and backbone (ONIBs). The linear synthesis is based on repetitive Sonogashira couplings and C‐desilylations (34–72% yield), starting from the monomeric propargyl alcohols 9 and 15 and the iodinated nucleosides 3, 7, 11 , and 13 . Strongly persistent intramolecular H‐bonds from the propargylic OH groups to N(3) of the adenosine units prevent the gg‐type orientation of the ethynyl groups at C(5′). As such, an orientation is required for the formation of cyclic duplexes, this H‐bond prevents the formation of duplexes connected by all four base pairs. However, the central units of the UAUA and AAUU analogues 18 and 14 associate in CDCl₃/(D₆)DMSO 10 : 1 to form a cyclic duplex characterized by reverse Hoogsteen base pairing. The UUAA tetramer 8 forms a cyclic UU homoduplex, while the AUAU tetramer 21 forms only linear associates. Duplex formation of the O‐silylated UUAA and AAUU tetramers is no longer prevented. The self‐complementary UUAA tetramer 22 forms Watson–Crick‐ and Hoogsteen‐type base‐paired cyclic duplexes more readily than the sequence‐isomeric AAUU tetramer 23 , further illustrating the sequence selectivity of duplex formation.     

Photoelectron spectroscopy of mono and binuclear iron and chromium cyclooctatetraene complexes

The ultraviolet photoelectron spectra of mono and binuclear cyclooctatetraene (COT) complexes (CO)₃FeCOT (I) [(CO)₃Fe]₂COT (II), CpCrCOT (Cp: 1,3 cyclopentadienyl) (III) and (CpCr)₂COT (IV) are reported. The interpretation of the low energy part of the spectra is followed by a discussion concerning the metal–ligand (COT) and metal–metal interactions. The calculated gas phase structure of CpCrCOT is presented and its main features are discussed.     

Synthesis and Odor of Chiral Partial Structures of Khusimone. Part 1

Khusimone (1), one of the main odor-donating compounds of vetiver oil is subject of the following study on structure/odor relationship. The omittance of the ethano bridge of the tricyclic khusimone leads to a bicyclic system. The stereoselective approach to this degraded structure is described, and the olfactory properties are studied. The key step of the synthesis of the hydrindane nucleus is based on a highly diastereoselective conjugate addition to a chiral oxo-cyclopentene-2-carboxylate.     

Oligosaccharide analogues of polysaccharides. Part 14:. Carbocyclic cyclodextrin analogues. Synthesis of all trimeric and tetrameric isomers by homo- and heterocoupling of 1,4-cis-diethynylated 1,5-anhydroglucitols

Hetero- or homocoupling of protected 1,4-cis-diethynylated 1,5-anhydroglucitols leads to two isomeric cyclotrimers and to four isomeric cyclotetramers. The C₃-symmetric cyciotrimer 31 , the C₄-symmetric cyclotetramer 35 , and the D₂-symmetric cyclotetramer 6 have been prepared before. We have now synthesized the C₁-symmetric cyciotrimer 13 , and the C₁- and the C₂-symmetric cyclotetramers 22 and 27 , respectively. The cyclotrimer 13 was prepared by intramolecular, oxidative homocoupling and, alternatively, by a one-pot trimerization/cyclization of the monomer 36 (Schemes 1 and 5, resp.). Oxidative homocoupling was used for the cyclization of the tetramers 19 and 25 , leading to 22 and 27. The tetramer 19 was made by sequential Cadiot-Chod-kiewicz coupling (Scheme 2)and the tetramer 25 by a combination of a Cadiot-Chodkiewicz reaction and an intermolecular, oxidalive homocoupling (Scheme 3). The acetates 34 and 38 , corresponding to 35 and 27 , respectively, were also made by a one-pot dimerization/cyclization of the dimer 37 (Scheme 5). Intramolecular oxidative heterocoupling is also feasible and results in an alternative, more convenient synthesis of the acetylated cyclotrimer 30 and the acetylated cyclotetramer 34 (corresponding to 31 and 35 , resp.; Scheme 4). The solid-state conformation of the C₄-symmetric cyclotetramer 34 corresponds well to the one predicted by force-field calculations. We compared the water-solubilities of the cyclotrimers 13 and 31 and the tetramers 6, 22, 27 , and 35 , their calculated conformations (MM3*), and the D -adenosine binding properties of the cyclotetramers 6, 27 , and 35 .     

Synthesis of Spiropyrimidodiazepines and Spirodiazepinopurines by Tandem Nitroso‐ene/Diels–Alder Reactions

New spirocyclic heterocycles 8, 16, 19/20, 25, 27 , and 30 derived from pyrimido[4,5‐b][1,4]diazepin]‐8′(9′H)‐one were synthesised by a tandem nitroso‐ene/Diels–Alder reaction of 4‐(alkenoylamino)‐5‐nitrosopyrimides. The crystal structure of 16 was established by X‐ray analysis. It is characterised by four pairs of intermolecular H‐bonds linking every two molecules in the unit cell. Sequential imine reduction and intramolecular condensation of the C(4′)‐(acylamino)‐pyrimido[4,5‐b][1,4]diazepines 27 and 30 led to the [1,4]diazepino[1,2,3‐gh]purines 28 / 29 and 31 , respectively.