Determination of some pesticides and intermediates by ion chromatography

The present paper deals with a method of solid-phase extraction of tocopherol acetate (TA, 49.6 microg/g) from emulsified nutritional supplements, which contains 50 kinds of compounds, followed by high-performance liquid chromatography (HPLC) with fluorescence detection The TA concentration is 5 to approximately 100,000 times lower than that of other compounds in the samples. Measuring the loading capacity of the larger amounts of vegetable oil onto the Bond Elut C18 cartridge was examined for the complete retention of smaller level of TA. A sample solution was applied to a solid-phase extraction cartridge and then TA was eluted by acetonitrile followed by HPLC. This method was suitable for the determination of TA in emulsified nutritional supplements. The proposed method was simple, rapid (analysis time: ca. 15 min), sensitive [detection limit: ca. 0.1 ng per injection (100 microl) at a signal-to-noise ratio of 3:1], and reproducible (relative standard deviation: ca. 2.5% (n=5)). The calibration graph of TA was linear in the range of 0.1 to 100 ng per injection (100 microl). Recovery of TA was over 90% by the standard addition method.     

Structural characterization of a lanthanum bistriflimide complex, La(N(SO2CF3)2)3(H2O)3, and an investigation of La, Sm, and Eu electrochemistry in a room-temperature ionic liquid, [Me3N(n)Bu][N(SO2CF3)2

The reduction of selected lanthanide cations to the zerovalent state in the room-temperature ionic liquid [Me3N(n)Bu][TFSI] is reported (where TFSI = bistriflimide, [N(SO2CF3)2]-). The lanthanide cations were introduced to the melt as the TFSI hydrate complexes [Ln(TFSI)3(H2O)3] (where Ln = La(III), Sm(III) or Eu(III)). The lanthanum compound [La(TFSI)3(H2O)3] has been crystallographically characterized, revealing the first structurally characterized f-element TFSI complex. The lanthanide in all three complexes was shown to be reducible to the metallic state in [Me3N(n)Bu][TFSI]. For both the Eu and Sm complexes, reduction to the metallic state was achieved via divalent species, and there was an additional observation of the electrodeposition of Eu metal.     

Autofluorescence characterization of advanced glycation end products of hemoglobin

This article describes the analysis of autofluorescence of advanced glycation end products of hemoglobin (Hb-AGE). Formed as a result of slow, spontaneous and non-enzymatic glycation reactions, Hb-AGE possesses a characteristic autofluorescence at 308/345 nm (lambda(ex)/lambda(em)). Even in the presence of heme as a quenching molecule, the surface presence of the glycated adduct gave rise to autofluorescence with the quantum yield of 0.19. The specificity of monoclonal antibody developed against common AGE structure with Hb-AGE was demonstrated using reduction in fluorescence polarization value due to increased molecular volume while binding. The formation of fluorescent adduct in hemoglobin in the advanced stage of glycation and the non-fluorescent HbA(1c) will be of major use in distinguishing and to know the past status of diabetes mellitus. While autofluorescence correlated highly with HbA(1c) value under in vivo condition (r = 0.85), it was moderate in the clinical samples (r = 0.55). The results suggest a non-linear relation between glycemia and glycation, indicating the application of Hb-AGE as a measure of susceptibility to glycation rather than glycation itself.     

Comparative study of solid state reactivity between ferrous oxalate dihydrate and unsubstituted/substituted aniline hydrochlorides

The solid state reactions between ferrous oxalate dihydrate i.e. FeC₂O₄.2H₂O and unsubstituted/ substituted aniline hydrochlorides have been studied. The products [FeCl/oxH/. AN-Cl] have been characterized by elemental analysis, infrared and Mössbauer spectroscopic techniques. The kinetic studies for the reactions have been performed at various temperatures for fixed particle sizes at constant compaction. The following order of reactivity has been observed: unsubstituted > p-substituted > m-substituted o-substituted.     

A simple and reliable semipreparative high-performance liquid chromatography technique for the isolation of marker-grade hyperforin from Hypericum perforatum L extract

The present work describes isolation of bioactive lipophilic constituent [namely, hyperforin from St. John's wort (Hypericum perforatum L.)], of approximately 98% purity by semipreparative high-performance liquid chromatography (LC). The extraction, isolation, and analysis of the collected compound is performed without the use of antioxidants and inert gas atmospheres at all the stages. Hyperforin, separated isocratically on a 12microm semiprep column, is obtained in high purity, lyophilized after the removal of the organic phase, and preserved at a low temperature. The purity of the collected marker compound is estimated by the use of LC-mass spectrometry and spectroscopic techniques.     

Core modified oxybenziporphyrins: new aromatic ligands for metal-carbon bond activation

Successful syntheses of two new aromatic core modified oxybenziporphyrins by a simple '3 + 1' methodology and the first aromatic core modified oxybenziporphyrin palladium complex are reported.     

meso-substituted aromatic 34pi core-modified octaphyrins: syntheses,characterization and anion binding properties

Modified octaphyrins with 34pi electrons have been synthesized and characterized following a simple synthetic methodology. An acid-catalyzed alpha,alpha coupling of tetrapyrranes containing furan, thiophene and selenophene rings resulted in the formation of the respective octaphyrins in relatively good yield. Solution studies by (1)H NMR and 2D NMR methods and single crystal Xray structural characterization reveal an almost flat structure with two heterocyclic rings inverted. Specifically, in 14 two selenophene rings (one on each biselenophene unit) are inverted while in 15 two furan rings (one on each bifuran unit) are inverted when the meso substituent are mesityl groups. On changing the mesityl substituent to m-xylyl group as in 19, the location of ring inversion shifts to pyrrole rings (one on each bipyrrole unit) indicating the dependence of structure on the meso substituents. UV/Vis studies, both in freebase and protonated forms reveal typical porphyrinic character and the aromatic nature of the octaphyrins. The Deltadelta values evaluated by (1)H NMR spectroscopy also support their aromatic nature. The protonated forms of octaphyrins bind TFA anion in a 1:2 ratio. The TFA anions are located one above and below the plane of the octaphyrin macrocycle and they are held by weak electrostatic NH-O interactions similar to that observed for protonated rubyrins. However, in the present case, there is an additional non-electrostatic CH-O interaction involving beta-CH of the inverted heterocyclic ring and the carbonyl oxygen of the TFA. Furthermore, inter molecular interactions between the Cbond;H of the meso-mesityl group and the fluorine of CF(3) group of bound TFA leads to the formation of one-dimensional supramolecular arrays with interplanar distance of 13 A between two octaphyrins.     

Superstable theories with few countable models

Summary We prove here: Theorem. LetT be a countable complete superstable non -stable theory with fewer than continuum many countable models. Then there is a definable groupG with locally modular regular generics, such thatG is not connected-by-finite and any type inG ^eq orthogonal to the generics has Morley rank. Corollary. LetT be a countable complete superstable theory in which no infinite group is definable. ThenT has either at most countably many, or exactly continuum many countable models, up to isomorphism.Supported by NSF grant DMS 90-06628     

Paramagnetic ruthenium(III) cyclometallated complex. Synthesis, spectroscopic studies and electron-transfer properties

The reaction of Ru^II(PPh₃)₃X₂ (X = Cl, Br) with o-(OH)C₆H₄C(H)=N-CH₂C₆H₅ (HL) under aerobic conditions affords Ru^II(L)₂(PPh₃)₂, 1, in which both the ligands (L) are bound to the metal center at the phenolic oxygen (deprotonated) and azomethine nitrogen and Ru^III(L¹)(L²)(PPh₃), 2, in which one L is in bidentate N,O form like in complex 1 and the other ligand is in tridentate C,N,O mode where cyclometallation takes place from the ortho carbon atom (deprotonated) of the benzyl amine fragment. The complex 1 is unstable in solution, and undergoes spontaneous oxidative internal transformation to complex 2. In solid state upon heating, 1 initially converts to 2 quantitatively and further heating causes the rearrangement of complex 2 to the stable RuL₃ complex. The presence of symmetry in the diamagnetic, electrically neutral complex 1 is confirmed by ¹H and ³¹P NMR spectroscopy. It exhibits an Ru^II → L, MLCT transition at 460 nm and a ligand based transition at 340 nm. The complex 1 undergoes quasi-reversible ruthenium(II)—ruthenium(III) oxidation at 1.27V vs. SCE. The one-electron paramagnetic cyclometallated ruthenium(III) complex 2 displays an L → Ru^III, LMCT transition at 658 nm. The ligand based transition is observed to take place at 343 nm. The complex 2 shows reversible ruthenium(III)—ruthenium(IV) oxidation at 0.875V and irreversible ruthenium(III)—ruthenium(II) reduction at −0.68V vs. SCE. It exhibits a rhombic EPR spectrum, that has been analysed to furnish values of axial (6560 cm⁻¹) and rhombic (5630 cm⁻¹) distortion parameters as well as the energies of the two expected ligand field transitions (3877 cm⁻¹ and 9540 cm⁻¹) within the t₂ shell. One of the transitions has been experimentally observed in the predicted region (9090 cm⁻¹). The first order rate constants at different temperatures and the activation parameter ΔH^#/ΔS^# values of the conversion process of 1 → 2 have been determined spectrophotometrically in chloroform solution.