A diruthenium-substituted polyoxometalate as an electrocatalyst for oxygen generation

Transition metal heteropolyanions have been used to catalyze a variety of organic oxidations but have not previously been used for O2 generation, despite sharing some structural similarities with dioxoruthenium water-oxidation catalysts. In this study, we report that the di-Ru-substituted polyoxometalate (POM) [Ru2Zn2(H2O)2(ZnW9O34)2]14- can be used to catalyze the electrochemical generation of O2. By comparing the behavior of this compound to that observed using a mono-Ru-substituted POM catalyst, we show that adjacent Ru sites are necessary to observe O2 generation. These observations suggest a reaction pathway involving two Ru-bound oxygen species combining to form O2 and are consistent with the accepted mechanism of electrochemical oxygen evolution. Finally, analysis of the observed electrode kinetics yields a Tafel slope of roughly 120 mV, which is similar to values reported previously for perovskite anodes.     

Simulation of the Adhesion of Particles to Surfaces

The removal of micrometer and submicrometer particles from dielectric and metal films represents a challenge in postchemical mechanical polishing cleaning. Proper modeling of the adhesive force between contaminant particles and these films is needed to develop optimal solutions to postchemical mechanical polishing cleaning. We have previously developed and experimentally validated a model to describe the adhesion between spherical particles and thin films. This simulation expands previous models to characterize the adhesive interaction between asymmetrical particles, characteristic of a polishing slurry, and various films. Our simulation accounts for the contact area between particles and substrates, as well as the morphology of the surfaces. Previous models fail to accurately describe the contact of asymmetrical particles interacting with surfaces. By properly accounting for nonideal and geometry and morphology, the simulation predicts a more accurate adhesive force than predictions based upon an ideal van der Waals model. The simulation is compared to experimental data taken for both semi-ideal particle-substrate systems (polystyrene latex spheres in contact with silicon films) and asymmetrical systems (alumina particles in contact with various films). Copyright 2001 Academic Press.     

Polarographic separation of cobalt from nickel

Summary The polarographic behaviour of nickel and cobalt in the mixed base electrolytes, urea-pyridine and urea-hydrazine has been studied. The effect of p_H, concentration of supporting electrolyte and the presence of various other ions was investigated. Well defined polarograms for both the elements were obtained at p_H 6.0 and 5.0 respectively. Attempts were made to utilize these observations in the separation of the two cations. While the difference in E _1/2 of the ions in urea-pyridine was greater than –0.3 volts that in urea-hydrazine was about –0.2 volts or slightly less even under the optimum conditions. In a mixed solution the waves for Co and Ni were therefore well developed and separated in the former base electrolyte. The polarograms in urea-hydrazine were, however, of little analytical use because of the washing away of the Ni wave due to the presence of even small amounts of cobalt.

---

Zusammenfassung Das polarographische Verhalten von Nickel und Kobalt in Harnstoff-Pyridin- und Harnstoff-Hydrazinlösung wurde untersucht und der Einfluß des p_H-Wertes, der Leitsalzkonzentration sowie der Gegenwart verschiedener anderer Ionen festgestellt. Bei p_H 6,0 bzw. 5,0 wurden für beide Elemente gut ausgebildete Polarogramme erhalten. Es wurde versucht, die erhaltenen Ergebnisse zur Trennung der beiden Ionen zu benutzen. In Harnstoff-Pyridinlösung beträgt der Unterschied der beiden Halbstufenpotentiale mehr als –0,3 V und man erhält gut ausgebildete und voneinander getrennte Stufen. In Harnstoff-Hydrazinlösung dagegen beträgt der Unterschied nur –0,2 V oder etwas weniger, selbst unter optimaler Bedingungen, und die Ni-Stufe wird schon durch kleine Kobaltmengen beeinträchtigt.

     

Design and Development of Zeolite-Based Catalytic Processes for Aromatics Production

Processes for the production of xylenes, which occur in an integrated aromatic complex, are discussed. A brief overview of the work carried out at Indian Petrochemicals Corporation Limited for the development of zeolite-based catalytic processes for the production of aromatics is presented. This includes xylene isomerization, transalkylation and disproportionation of C₇ and C₉ aromatics for maximization of xylenes, selective disproportionation of toluene and selective alkylation of mono-alkylaromatics to p-dialkylbenzene. Achievements in the commercialization of zeolite-based catalysts and processes for isomerization of m-xylene to p- and o-xylene along with dealkylation of ethylbenzene, and for selective ethylation of ethylbenzene to produce p-diethylbenzene are highlighted.     

Structural characterization of a lanthanum bistriflimide complex, La(N(SO2CF3)2)3(H2O)3, and an investigation of La, Sm, and Eu electrochemistry in a room-temperature ionic liquid, [Me3N(n)Bu][N(SO2CF3)2

The reduction of selected lanthanide cations to the zerovalent state in the room-temperature ionic liquid [Me3N(n)Bu][TFSI] is reported (where TFSI = bistriflimide, [N(SO2CF3)2]-). The lanthanide cations were introduced to the melt as the TFSI hydrate complexes [Ln(TFSI)3(H2O)3] (where Ln = La(III), Sm(III) or Eu(III)). The lanthanum compound [La(TFSI)3(H2O)3] has been crystallographically characterized, revealing the first structurally characterized f-element TFSI complex. The lanthanide in all three complexes was shown to be reducible to the metallic state in [Me3N(n)Bu][TFSI]. For both the Eu and Sm complexes, reduction to the metallic state was achieved via divalent species, and there was an additional observation of the electrodeposition of Eu metal.     

Autofluorescence characterization of advanced glycation end products of hemoglobin

This article describes the analysis of autofluorescence of advanced glycation end products of hemoglobin (Hb-AGE). Formed as a result of slow, spontaneous and non-enzymatic glycation reactions, Hb-AGE possesses a characteristic autofluorescence at 308/345 nm (lambda(ex)/lambda(em)). Even in the presence of heme as a quenching molecule, the surface presence of the glycated adduct gave rise to autofluorescence with the quantum yield of 0.19. The specificity of monoclonal antibody developed against common AGE structure with Hb-AGE was demonstrated using reduction in fluorescence polarization value due to increased molecular volume while binding. The formation of fluorescent adduct in hemoglobin in the advanced stage of glycation and the non-fluorescent HbA(1c) will be of major use in distinguishing and to know the past status of diabetes mellitus. While autofluorescence correlated highly with HbA(1c) value under in vivo condition (r = 0.85), it was moderate in the clinical samples (r = 0.55). The results suggest a non-linear relation between glycemia and glycation, indicating the application of Hb-AGE as a measure of susceptibility to glycation rather than glycation itself.     

Comparative study of solid state reactivity between ferrous oxalate dihydrate and unsubstituted/substituted aniline hydrochlorides

The solid state reactions between ferrous oxalate dihydrate i.e. FeC₂O₄.2H₂O and unsubstituted/ substituted aniline hydrochlorides have been studied. The products [FeCl/oxH/. AN-Cl] have been characterized by elemental analysis, infrared and Mössbauer spectroscopic techniques. The kinetic studies for the reactions have been performed at various temperatures for fixed particle sizes at constant compaction. The following order of reactivity has been observed: unsubstituted > p-substituted > m-substituted o-substituted.     

A simple and reliable semipreparative high-performance liquid chromatography technique for the isolation of marker-grade hyperforin from Hypericum perforatum L extract

The present work describes isolation of bioactive lipophilic constituent [namely, hyperforin from St. John's wort (Hypericum perforatum L.)], of approximately 98% purity by semipreparative high-performance liquid chromatography (LC). The extraction, isolation, and analysis of the collected compound is performed without the use of antioxidants and inert gas atmospheres at all the stages. Hyperforin, separated isocratically on a 12microm semiprep column, is obtained in high purity, lyophilized after the removal of the organic phase, and preserved at a low temperature. The purity of the collected marker compound is estimated by the use of LC-mass spectrometry and spectroscopic techniques.     

Core modified oxybenziporphyrins: new aromatic ligands for metal-carbon bond activation

Successful syntheses of two new aromatic core modified oxybenziporphyrins by a simple '3 + 1' methodology and the first aromatic core modified oxybenziporphyrin palladium complex are reported.     

meso-substituted aromatic 34pi core-modified octaphyrins: syntheses,characterization and anion binding properties

Modified octaphyrins with 34pi electrons have been synthesized and characterized following a simple synthetic methodology. An acid-catalyzed alpha,alpha coupling of tetrapyrranes containing furan, thiophene and selenophene rings resulted in the formation of the respective octaphyrins in relatively good yield. Solution studies by (1)H NMR and 2D NMR methods and single crystal Xray structural characterization reveal an almost flat structure with two heterocyclic rings inverted. Specifically, in 14 two selenophene rings (one on each biselenophene unit) are inverted while in 15 two furan rings (one on each bifuran unit) are inverted when the meso substituent are mesityl groups. On changing the mesityl substituent to m-xylyl group as in 19, the location of ring inversion shifts to pyrrole rings (one on each bipyrrole unit) indicating the dependence of structure on the meso substituents. UV/Vis studies, both in freebase and protonated forms reveal typical porphyrinic character and the aromatic nature of the octaphyrins. The Deltadelta values evaluated by (1)H NMR spectroscopy also support their aromatic nature. The protonated forms of octaphyrins bind TFA anion in a 1:2 ratio. The TFA anions are located one above and below the plane of the octaphyrin macrocycle and they are held by weak electrostatic NH-O interactions similar to that observed for protonated rubyrins. However, in the present case, there is an additional non-electrostatic CH-O interaction involving beta-CH of the inverted heterocyclic ring and the carbonyl oxygen of the TFA. Furthermore, inter molecular interactions between the Cbond;H of the meso-mesityl group and the fluorine of CF(3) group of bound TFA leads to the formation of one-dimensional supramolecular arrays with interplanar distance of 13 A between two octaphyrins.