On the computation of molecular electronic affinities

Using a multireferent MBPT method (CIPSI) the electronic affinity (EA) of F, CN and HCC is computed. Results show how UMP2 gives unbalanced truncation of the MP series, while ROMP2 has the correct (balanced) behaviour. The good agreement with the experimental EA found for some compounds is accidental and associated to an error compensation. The good agreement with the experimental data found for the ROMP2 and CIPSI EAs is analysed.This paper was presented at the International Conference on The Impact of Supercomputers on Chemistry, held at the University of London, London, UK, 13–16 April 1987     

Determination of copper in medicinal plants used as dietary supplements by atomic absorption spectrometry with direct flame solid analysis

An alternative device for the direct solid analysis (DSA) for copper determination by flame atomic absorption spectrometry (FAAS) is proposed. Copper was directly determined in commercial medicinal plants used as dietary supplements. The determination of copper in solid samples by DSA–FAAS was made by using a conventional air–acetylene flame. Between 0.05 and 1.5 mg of each test, sample was weighed directly into a small polyethylene vial connected to the device used for solid introduction into the flame. Test samples were introduced into the flame as a dry aerosol using a T-quartz cell set between the burner and the optical path. The T-quartz cell has a slit in the superior part by which the solid aerosol passes to the flame. A transient signal, evaluated as integrated absorbance, is produced and it is totally integrated in 2 s. Background signals always presented absorbance values less than 0.1. It was found a characteristic mass of 0.8 ng Cu and absolute limit of detection of 1.2 ng (3 s), or 1.2 μg g⁻¹ if a sample mass of 1 mg was used. Optimized conditions for air flow rate, flame stoichiometry, and so on were established as well. No excessive grinding of the samples was needed and samples with particle of size less than 80 μm were used throughout. No statistical difference between the results from the proposed system and those obtained by sample digestion and determination by conventional FAAS was observed. With the proposed procedure, more than 50 test samples can be analyzed in 1 h and it can be easily adapted to conventional spectrometers for FAAS.     

A new method for obtaining adsorption isotherms on colloidal suspensions via electrokinetic sonic amplitude measurement

The standard methods for obtaining adsorption isotherms on colloidal suspensions are usually very time consuming and involve a large number of steps and assumptions that increase the experimental errors. In this work, an alternative method is proposed to evaluate the adsorption behavior of electrosteric-stabilized systems based on electrokinetic sonic amplitude signal measurements. The new method, entitled "zeta-sorption", is noticeably less time-consuming when compared to conventional procedures but showed great precision and reliability confirmed by comparison with data obtained from conventional routes on alumina-polyacrylate and alumina-citric acid aqueous suspensions. The experimental conditions that restrict the applicability of the new method were identified and justified by discussing the possible ion exchanges.     

Substituent effects in eight-electron electrocyclic reactions

The main features of transition structures associated with eight-electron electrocyclic reactions have been studied with Density Functional Theory. It is found that conrotatory electrocyclization reaction of (3Z,5Z)-octa-1,3,5,7-tetraenes takes place via M?bius aromatic transition structures of helical conformation. The reaction is completely periselective. In general, transition structures having outward substituents are preferred with respect to the inward transition structures, irrespective of the pi-donor or pi-acceptor character of the substituent. In contrast with four-electron thermal conrotatory electrocyclic reactions, there is no satisfactory correlation between the difference in energy of activation between inward and outward substituents and the Taft resonance sigma(R) parameter.     

Selenium and mercury bioaccessibility in fish samples: an in vitro digestion method

The assessment of hazard from selenium (Se) and mercury (Hg) contaminants in the food chain based on their potential bioaccessibility and on estimate of their actual content in fish is reported under an in vitro model. Atomic fluorescence spectroscopy (AFS) was applied for total selenium and mercury quantification. Selenium and mercury bioaccessibility varied depending on the type of fish analyzed. Se solubility in the gastrointestinal supernatants was higher in swordfish and sardine (76 and 83%, respectively) than in tuna (50%). A low Hg bioaccessibility (9-17%) was found for all the samples.Simulated human gastric and intestinal digestion led to the identification of selenomethionine (SeMet) and organic mercury in the three digested fish. Furthermore, these species were not modified during the digestion. Speciation of selenium compounds was done by liquid chromatography in conjunction with inductively coupled plasma mass spectrometry (LC-ICP-MS).Sardine had the most favorable Se:Hg, [Se:Hg]_{bioaccessible} and [SeMet:Hg]_{bioaccessible} molar ratios, making it preferable to tuna and swordfish.The effect of cooking was also evaluated.     

Approximate transferability in alkanenitriles

The atomic and bond properties of a series of alkanenitriles were calculated in order to analyze the transferability of the CN, methyl, and methylene groups. The calculations were carried out using the atoms in molecules (AIM) theory on RHF/6‐31++G**// RHF/6‐31G** wave functions obtained for compounds CN–R (R ranging from H to C₁₁H₂₃). Linear correlations between L(Ω) and N(Ω) were used to establish N(CH₂) and N(CH₃) nearly transferable values. Average values and maximum differences to the mean value of several properties were used for classifying the CN group. It shows a transferable behavior along the CN–R series for R>Et. The methyl group presents specific properties when R<Pr. The methylene groups can be classified considering both their position with respect to the end of the chain and the position with respect to the CN group. The atomic energy displays a dependence on the molecular size. Although this behavior does not allow to consider this property as transferable, both the ab initio total electronic molecular energies and the experimental heats of formation can be fitted, by linear regression analysis, as a function of the number of methylene groups. © 2001 John Wiley & Sons, Inc. Int J Quantum Chem, 2001     

Free radical-scavenging activity of indolic compounds in aqueous and ethanolic media

Indolic compounds are a broad family of substances present in microorganisms, plants and animals. They are mainly related with tryptophan metabolism, and present particularities that depend on their respective chemical structures. The most important members of the family are the plant hormone, indole-3-acetic acid, and the animal hormone, melatonin. An important characteristic of some indolic compounds is that they may be useful as chemical preventive agents against diseases such as cancer, oxidative stress, etc. For this reason, the possible antioxidant activities (free radical-scavenging activity) of several indoles were studied. The2,2'-azino-bis-(3-ethylbenzthiazoline-6-sulfonic acid /H(2)O(2)/HRP decoloration method was applied to determine both hydrophilic (in buffered media) and lipophilic (in organic media) antioxidant properties of the indolic compounds. Also, a study of the hydrophilic antioxidant activities of indoles at different pH values (between 4.5 and 8.5) was made. Finally, their possible role as diet plant antioxidants is discussed.     

Identifying acetylated lignin units in non-wood fibers using pyrolysis-gas chromatography/mass spectrometry

A series of non-wood plant fibers, namely kenaf, jute, sisal and abaca, have been analyzed upon pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) of the whole material. The pyrolysis products mainly arise from the carbohydrate and lignin moieties of the fibers. The lignin-derived phenols belonged to the p-hydroxyphenylpropanoid (H), guaiacylpropanoid (G) and syringylpropanoid (S) structures, and showed a high S/G ratio of between 2.0 and 5.4, the highest corresponding to kenaf. Among the lignin-derived phenols released, small amounts of sinapyl and coniferyl acetates (in both cis- and trans-forms) were identified for the first time upon Py-GC/MS of lignocellulosic materials. Acetylation of the sinapyl and coniferyl alcohols was at the gamma-position of the side chain. The release of these alcohols derived from intact acetylated lignin units upon pyrolysis seems to indicate that the native lignin in the fibers selected for this study is at least partially acetylated. Sinapyl (and coniferyl) acetates have recently been suggested to be authentic lignin precursors involved in the polymerization of lignin along with the normal sinapyl and coniferyl alcohols. Py-GC/MS will offer a convenient and rapid tool for analyzing naturally acetylated lignins, as well as to screen plant materials for the presence of acetylated units in lignin.     

Reduction of sulfoxides with boranes catalyzed by MoO2Cl2

The first example of an organic reduction with boranes catalyzed by a high valent oxo-complex is reported. The systems catecholborane/MoO₂Cl₂(H₂O)₂ (5 mol %) and BH₃·THF/MoO₂Cl₂ (5 mol %) proved to be very efficient for the reduction of sulfoxides to the corresponding sulfides in excellent yields.     

Multicommutation as an environmentally friendly analytical tool in the hydride generation atomic fluorescence determination of tellurium in milk

The aim of this study is to show the advantages of the emerging multicommutation methodology based on the use of solenoid valves for Te determination in milk by hydride generation atomic fluorescence spectrometry (HG-AFS). The delivery of a series of alternating sequential insertions of small volumes of samples and reagents gives rise to new hydrodynamic processes and exciting analytical potentials by controlling the time of flow through the on/off-switched solenoid valves. This drastically reduces the reagent consumption by a factor of 4 and the generation of effluents (590 mL h^–1 instead of 750 mL h^–1 generated by the continuous-mode measurement) and also provides an improvement in the laboratory productivity by an increase of the sample throughput (85 h^–1 compared to 20 h^–1 found in the continuous mode). So, multicommutation is an environmentally and economically sustainable alternative to the methodology based on continuous measurements. The multicommutation-based method developed was applied to tellurium determination in commercially available milk samples; a calibration range of 0.0–0.5 ng mL^–1 and a detection limit of 0.20 ng L^–1 with average relative standard deviation of 2.1% were found. Comparable results were obtained for a series of samples using both continuous and multicommutation HG-AFS modes.