Synthesis of fluorinated drimanes. Preparation of 9αF-drimenin

A stereoselective approach to the 9α-fluorinated analogue of the natural drimane sesquiterpene drimenin starting from β-ionone is described. β-Ionone is transformed into a bicyclic β-cetoester from which 9αF-drimenin is prepared through stereoselective electrophilic fluorination at the C-9 with N-fluorobenzenesulfonimide followed by Wittig methylenation, allylic bromination, bromine-hydroxyl exchange and γ-lactonization.     

Reactivity of 2-halo-2H-azirines. 1. Reactions with nucleophiles.

Nucleophilic substitution reactions of 2-halo-2H-azirines 1a, 1b, 1d, and 1e with potassium phthalimide and aniline allowed the preparation of new substituted 2H-azirines 2-5. The reactions of 2-bromo-2H-azirine 1a with methylamine led to the synthesis of alpha-diimines 7 and 8. 2-Halo-2H-azirines were also established as building blocks for the synthesis of a range of heterocyclic compounds, namely, quinoxalines 10a-10d, 3-oxazoline 14, and 2H-[1,4]oxazines 18 and 20. X-ray crystal structures of alpha-diimine 7, 3-oxazoline 14, and 2H-[1,4]oxazine 18 are reported.     

Spectrophotometric flow-injection determination of zinc in plant digests based on a spot test

A spot test was implemented in a flow-injection system for the spectrophotometric determination of zinc in digests of plant materials. It is based on the influence of Zn²⁺ on the oxidation rate of 1-naphthylethylenediamine (NED) by hexacyanoferrate(III) under acidic conditions. In order to control the precipitate formation and to maintain the resulting suspension, a micellar medium was established by adding Triton X-100. The proposed system handles about 65 samples per hour, meaning 72 μg NED and 9.0 mg K₃[Fe(CN)₆] per determination. Baseline drift is usually <0.01 absorbance per hour and the analytical signals for 0.5-2.5 mg l⁻¹ Zn range within ca. 0.07-0.45 absorbance. Linearity of the analytical curve is fair (r>0.999, n=6) and detection limit was estimated as 0.2 mg l⁻¹ Zn. Results are precise (R.S.D.<1%, n=10) and in agreement with flame atomic absorption spectrometry and with certified values of standard reference materials.     

A thieno-2H-chromene alpha-amino acid derivative: synthesis and photochromic properties

[structure: see text] A new photochromic thieno-2H-chromene alpha-amino acid derivative was prepared by C-N palladium-catalyzed cross-coupling of a bromothieno-2H-chromene with the aminated aromatic side chain of the methyl ester of a N,N-diprotected amino acid. Its good photochromic properties demonstrated by flash photolysis and continuous irradiation indicate a possible application in ophthalmic lenses. It may also be inserted into peptides to give photoinduced reversible structural changes.     

A new procedure for bovine milk digestion in a focused microwave oven: gradual sample addition to pre-heated acid

Milk samples can be efficiently digested using a focused microwave oven, however the conventional procedure of addition of concentrated acids to the liquid sample leads to digestates with elevated acidity and residual carbon concentrations. In this work a focused microwave oven was applied for acid digestion of bovine milk samples using a conventional and an alternative procedure based on gradual sample addition to hot and concentrated acids. A two-level 2³ full factorial design experiment with eight runs was carried out to evaluate the optimum experimental conditions for reducing both the residual carbon and the final acidity of digestates. The three studied parameters were: temperature of the digestion medium for sample addition, addition of sulfuric acid before the sample or during the first step, and number of aliquots of the sample gradually added. The best conditions were attained by adding small aliquots of milk (ten-fold a volume of 0.5 ml added during 5.0 min) to a digestion mixture containing 3.0 ml nitric acid plus 1.0 ml sulfuric acid heated at 105 °C. It was demonstrated that the digestion efficiency of the alternative procedure was better than the conventional procedure, i.e. 98 and 80%, respectively. The alternative procedure was applied for determination of Ba, Ca, Cu, K, Mg, Na, P, and Zn in whole and non-fat bovine milk. The accuracy was proved using two certified reference materials (whole and non-fat milk powder).     

Synthesis of tridimensional polymers by the copolymerization of phenylglycidylether with aromatic diglycidylethers

Copolymers from phenylglycidylether and several aromatic diglycidylethers are prepared using different ratios of difunctional comonomers and the AIP/ZnCl₂ initiator system. It is found that the percentage of incorporated comonomer depends on the nature of the aromatic moiety introduced. The copolymers are characterized by ¹³C-NMR spectroscopy and turn out to be completely regular and with a high degree of isotacticity (about 80%) that confirms the high degree of regio- and stereoselectivity of the initiator system used. The thermal characteristics of copolymer networks are investigated using differential scanning calorimetry and thermogravimetry. Two fusion endotherms are observed which vary with the degree of crosslinking. By thermogravimetric analyses the thermal stability is found to increase when the crosslinking degree does. © 1994 John Wiley & Sons, Inc.     

Two-step upflow anaerobic sludge bed system for sewage treatment under subtropical conditions with posttreatment in waste stabilization ponds

A pilot-scale sewage treatment system consisting of two upflow anaerobic sludge bed (UASB) reactors followed by five waste stabilization ponds (WSPs) in series was studied under subtropical conditions. The first UASB reactor started up in only 1 mo (stable operation, high chemical oxygen demand [COD] removal efficiency, low volatile fatty acids concentration in the effluent, alkalinity ratio above 0.7, biogas production above 0.1 Nm3/kg of CODremoved). Removal efficiencies up to 90% were obtained in the anaerobic steps at a hydraulic retention time of 6 + 4 h (80% removal in the first step). Fecal coliform removal in the whole system was 99.9999% (99.94% in anaerobic steps and 99.98% in WSPs). COD balances over UASB reactors are provided. A minimum set of data necessary to build COD balances is proposed. Intermittent sludge washout was detected in the reactors with the COD balances. Sludge washout from single-step UASB reactors should be monitored and minimized in order to ensure constant compliance with discharge standards, especially when no posttreatment is provided. The system combined high COD and fecal coliform removal efficiency with an extremely low effluent concentration, complying with discharge standards, and making it an attractive option for sewage treatment in subtropical regions.     

Adding water to sugar: a spectroscopic and computational study of alpha- and beta-phenylxyloside in the gas phase

The gas phase structures of phenyl alpha- and beta-d-xylopyranoside (alpha- and beta-pXyl) and their mono-hydrates have been investigated using a combination of resonant two-photon ionization (R2PI), ultra-violet hole-burning and resonant infrared ion dip spectroscopy, coupled with density functional theory (DFT) and ab initio computation. The hole-burning experiments indicate the population of a single conformer only, in each of the two anomers. Their experimental and calculated infrared spectra are both consistent with a conformational assignment corresponding to the computed global minimum configuration. All three OH groups are oriented towards the oxygen atom (O1) on the anomeric carbon atom to form an all trans(ttt) counter-clockwise chain of hydrogen bonds. The mono-hydrates, alpha- and beta-pXyl(H(2)O) each populate two distinct structures in the molecular beam environment, with the water molecule inserted between OH4 and OH3 or between OH3 and OH2 in alpha-pXyl(H2O), and between OH2 and O1 in either of two alternative orientations, in beta-pXyl(H2O). In all of the mono-hydrated xyloside complexes, the water molecule inserts into the weakest link of the sugar molecules' hydrogen-bonded chain of hydroxy groups, creating a single extended chain, strengthened by co-operativity. The all-trans configuration of the xylose moiety is retained and the mono-hydrate structures correspond to those calculated to lie at the lowest relative energies.     

Use of highly efficient Draper-Lin small composite designs in the formal optimisation of both operational and chemical crucial variables affecting a FIA-chemiluminescence detection system

A new formal strategy in the multidimensional optimisation of the experimental variables affecting the chemiluminescence (CL) detection in flow injection analysis (FIA) is proposed here. The strategy implies several steps, being the most significant: selection of the variables to be studied and their experimental domain; use of a screening design to detect significant variables and interactions into the experimental region; study of the main effect of variables and second-order interactions; and finally application of a Draper-Lin small composite design (orthogonal) to obtain the optimum values of the significant variables. The methodology is applied to the determination of methylamine by FIA based on the use of the peroxyoxalate CL (PO-CL) reaction. Considering the high number of experiments required due to the different chemical and instrumental variables to be taken account and their adequate compatibility to obtain maximum sensitivity, the methodology offers a rigorous study of the main effects and interactions, achieving a reduction of experimental work.     

Matrix-isolation FT-IR spectra and theoretical study of dimethyl sulfate

The preferred conformations of dimethyl sulfate and their vibrational spectra were studied by matrix-isolation FT-IR spectroscopy and theoretical methods (DFT and MP2, with basis sets of different sizes, including the quadruple-zeta, aug-cc-pVQZ basis). Conformer GG (of C2 symmetry and exhibiting OSOC dihedral angles of 74.3 degrees ) was found to be the most stable conformer in both the gaseous phase and isolated in argon. Upon annealing of the matrix, the less stable observed conformer (GT; with C1 symmetry) quickly converts to the GG conformer, with the resulting species being embedded in a matrix-cage which corresponds to the most stable matrix-site for GG form. The highest energy TT conformer, which was assumed to be the most stable conformer in previous studies, is predicted by the calculations to have a relative energy of ca. 10 kJ mol-1 and was not observed in the spectra of the matrix-isolated compound.