A new procedure for bovine milk digestion in a focused microwave oven: gradual sample addition to pre-heated acid

Milk samples can be efficiently digested using a focused microwave oven, however the conventional procedure of addition of concentrated acids to the liquid sample leads to digestates with elevated acidity and residual carbon concentrations. In this work a focused microwave oven was applied for acid digestion of bovine milk samples using a conventional and an alternative procedure based on gradual sample addition to hot and concentrated acids. A two-level 2³ full factorial design experiment with eight runs was carried out to evaluate the optimum experimental conditions for reducing both the residual carbon and the final acidity of digestates. The three studied parameters were: temperature of the digestion medium for sample addition, addition of sulfuric acid before the sample or during the first step, and number of aliquots of the sample gradually added. The best conditions were attained by adding small aliquots of milk (ten-fold a volume of 0.5 ml added during 5.0 min) to a digestion mixture containing 3.0 ml nitric acid plus 1.0 ml sulfuric acid heated at 105 °C. It was demonstrated that the digestion efficiency of the alternative procedure was better than the conventional procedure, i.e. 98 and 80%, respectively. The alternative procedure was applied for determination of Ba, Ca, Cu, K, Mg, Na, P, and Zn in whole and non-fat bovine milk. The accuracy was proved using two certified reference materials (whole and non-fat milk powder).     

Cellulose microfibrils from banana farming residues: isolation and characterization

Cellulose microfibrils have been prepared from banana rachis using a combination of chemical and mechanical treatments. The morphology and structure of the samples were characterized using transmission electron microscopy, atomic force microscopy, and X-ray diffraction. Fourier-transformed infrared spectroscopy (FTIR) was used to characterize the chemical modifications of the samples after each treatment. Suspensions of bundled or individualized 5-nm-wide microfibrils were obtained after homogenization (PH) whereas an organosolv (PO) treatment resulted in shorter aggregates of parallel cellulose microcrystallites. The sharper rings in the X-ray diffraction pattern of the PO-treated sample suggest a higher crystallinity due to a more efficient removal of hemicelluloses and dissolution of amorphous zones by the acid treatment. Both microfibrils and microcrystals prepared by both methods can be used as reinforcing filler in nanocomposite materials.     

A way of establishing quality of measurements in gas analysis—national and international aspects

Standardising quality of measurements at both the national and international level results in a unity in measurement that may be regarded a synonym of traceability. In gas analysis, the key issue in achieving this aim is production of gaseous reference materials. Establishing a network of secondary measurement standards at gaseous CRM producers’ sites in Ukraine might be interesting for those involved in gas analysis activities. Inevitably, problems concerning the recognition of measuring capabilities of both national metrological institutes and local CRM producers are now an international issue. Thus, the problems of national adoption of international standards, as well as harmonisation between different international documents are currently relevant, and Ukrainian experience may be useful to others in this field. Presented at the 3rd International Conference on Metrology, November 2006, Tel Aviv, Israel.     

New In-situ Sampling and Analysis of the Production of CeO<Subscript>2</Subscript> Powders from Liquid Precursors using a Novel Wet Collection System in a rf Inductively Coupled Thermal Plasma Reactor. Part 1: Reactor System and Sampling Probe

A new reactor and a novel in-situ sampling technique were developed for the study of the synthesis of CeO₂ powders produced from dissolved cerium nitrate salts. The conical reactor minimized particle recirculation and provided a highly symmetrical and undisturbed plasma flow suitable for the analysis of the phenomena affecting the formation of CeO₂ powders. Both a calorimetric study of the reactor and a thermodynamic analysis of CeO₂ formation were conducted. The sampling probe is described and near-isokinetic sampling was achieved. The sampled particles were collected using a miniature wet collection system, i.e. a mist atomizer and a custom-made spray chamber. A numerical simulation of the velocity and temperature fields of the plasma gas in the reactor was done using Fluent. A comprehensive droplet-to-particle formation mechanism presented elsewhere is revisited and expanded based on calorimetry, thermodynamics of CeO₂ formation, numerical simulations and collected particles. No traces of other oxidation states other than CeO₂ were found.     

Synthesis of tridimensional polymers by the copolymerization of phenylglycidylether with aromatic diglycidylethers

Copolymers from phenylglycidylether and several aromatic diglycidylethers are prepared using different ratios of difunctional comonomers and the AIP/ZnCl₂ initiator system. It is found that the percentage of incorporated comonomer depends on the nature of the aromatic moiety introduced. The copolymers are characterized by ¹³C-NMR spectroscopy and turn out to be completely regular and with a high degree of isotacticity (about 80%) that confirms the high degree of regio- and stereoselectivity of the initiator system used. The thermal characteristics of copolymer networks are investigated using differential scanning calorimetry and thermogravimetry. Two fusion endotherms are observed which vary with the degree of crosslinking. By thermogravimetric analyses the thermal stability is found to increase when the crosslinking degree does. © 1994 John Wiley & Sons, Inc.     

Preconcentration of Cadmium and Zinc on a Chelating Sorbent and Their Determination by Flame Atomic Absorption Spectrometry

A method is developed for cadmium and zinc preconcentration on a minicolumn packed with a new chelating polymer sorbent. The effects of the test solution pH and volume, the sample matrix composition, the eluent volume, and the sample and eluent flow rates are studied. Zinc and cadmium in the eluate are determined by flame atomic absorption spectrometry. Under optimal conditions, the determined ion recovery is more than 95%. The detection limits (3σ, n = 20) are found to be 15.0 (Cd) and 17.2 (Zn) ng/mL. The developed method is employed for cadmium and zinc determination in samples of seawater and water obtained after oil pumping.     

Two-step upflow anaerobic sludge bed system for sewage treatment under subtropical conditions with posttreatment in waste stabilization ponds

A pilot-scale sewage treatment system consisting of two upflow anaerobic sludge bed (UASB) reactors followed by five waste stabilization ponds (WSPs) in series was studied under subtropical conditions. The first UASB reactor started up in only 1 mo (stable operation, high chemical oxygen demand [COD] removal efficiency, low volatile fatty acids concentration in the effluent, alkalinity ratio above 0.7, biogas production above 0.1 Nm3/kg of CODremoved). Removal efficiencies up to 90% were obtained in the anaerobic steps at a hydraulic retention time of 6 + 4 h (80% removal in the first step). Fecal coliform removal in the whole system was 99.9999% (99.94% in anaerobic steps and 99.98% in WSPs). COD balances over UASB reactors are provided. A minimum set of data necessary to build COD balances is proposed. Intermittent sludge washout was detected in the reactors with the COD balances. Sludge washout from single-step UASB reactors should be monitored and minimized in order to ensure constant compliance with discharge standards, especially when no posttreatment is provided. The system combined high COD and fecal coliform removal efficiency with an extremely low effluent concentration, complying with discharge standards, and making it an attractive option for sewage treatment in subtropical regions.     

Flow-injection analysis with a small cylindrical wire type electrode

An amperometric detector with a small thin mercury film electrode is described. The device demonstrates advantageous operational characteristics such as small dispersion (D<2) and “memory effect” (me<0.6%), extensive maximum sample frequency (msf −200 samples/h), and high sensitivity. It has been proven useful in flow-injection analysis at a constant potential under hydrodynamic conditions.     

Case Study: Doping Substances in Equestrian Food Supplements

In the course of investigations on equestrian supplemental products for the presence of doping substances, two products were found to contain forbidden substances. As reported earlier a plant extract (Mexican cactus extract) named “Energy 5” contained the anabolic androgenic steroids (AAS) stanozolol, 17β-hydroxy-17α-methyl-5α-androstane-3β-ol (3β,5α-THMT) as well as mestanolone not declared on the label. In the present study, a product called “Super Kalm Paste” was tested. Analysis by gas chromatography - mass spectrometry (GC-MS) revealed that the preparation contained the class I anti-arrhythmics quinine (trade names Kinidin^TM, Durules) and cinchonine. The samples were prepared according to a sample preparation procedure established for anabolic steroids in nutritional supplements for humans. The sample treatment comprised the extraction and purification of the analytes as well as the chemical conversion with N-methyl-N-trimethylsilyl-trifluoracetamide (MSTFA) to yield the trimethylsilyl (TMS)-derivatives. To verify whether the administration of such products could lead to positive doping tests, a pilot excretion study on “Energy 5” was conducted with two geldings, and urine samples were collected. Gas chromatography - high resolution mass spectrometry (GC-HRMS) after solid phase extraction and mixed derivatisation has demonstrated the presence of the stanozolol metabolite 16β-hydroxy-stanozolol in urine samples after “Energy 5” application.     

Use of highly efficient Draper-Lin small composite designs in the formal optimisation of both operational and chemical crucial variables affecting a FIA-chemiluminescence detection system

A new formal strategy in the multidimensional optimisation of the experimental variables affecting the chemiluminescence (CL) detection in flow injection analysis (FIA) is proposed here. The strategy implies several steps, being the most significant: selection of the variables to be studied and their experimental domain; use of a screening design to detect significant variables and interactions into the experimental region; study of the main effect of variables and second-order interactions; and finally application of a Draper-Lin small composite design (orthogonal) to obtain the optimum values of the significant variables. The methodology is applied to the determination of methylamine by FIA based on the use of the peroxyoxalate CL (PO-CL) reaction. Considering the high number of experiments required due to the different chemical and instrumental variables to be taken account and their adequate compatibility to obtain maximum sensitivity, the methodology offers a rigorous study of the main effects and interactions, achieving a reduction of experimental work.