Kinetics and mechanism of the oxidation of acetaldehyde by chromic acid in perchloric acid

Summary The oxidation of MeCHO by chromium(VI) has been studied in HClO₄ medium over a wide range of experimental conditions and has been found to obey the rate law;v=k[MeCHO][HCrO ₄ ^– ][H⁺]. The calculated H and-S values for the reaction are 30±2kJ mol^–1 and 171±7J mol^–1deg^–1, respectively. The mechanism is discussed in terms of carbon-hydrogen bond cleavage.     

Chromatographic separation of some metal ions on NTA-impregnated thin-layer plates

Summary NTA (nitrilo triacetic acid) has been used as an impregnating agent for an efficient TLC separation of twelve metal ions, using a mixture of 5% aq ammonia, ethanol acetone and acetic acid as the solvent system and dithizone (0.5% in chloroform) for visualization.     

Depolymerization and chemical modification of lignite coal byPseudomonas cepacia strain DLC-07

Applied Biochemistry and Biotechnology - Coal metabolizingPseudomonas cepacia DLC-07 was isolated from soil and shown to use soluble lignite coal as a carbon/energy source.Pseudomonas modified coal...     

Equilibrium studies of Mn(II), Mg(II), Ca(II), Sr(II) and Ba(II) withp-fluoro-,p-chloro-,p-bromo-,p-methyl-benzoylacetones and 1-(4-fluorophenyl)-1,3-pentanedione

The rawpH-data, obtained from the potentiometric titrations of the titled ligands with NaOH in 75% (v/v) dioxane-water mixture performed at 20, 30 and 40°C at constant ionic strength (=0.1M-NaClO₄), have been adequately corrected for dilution, and solvent effects in order to evaluate thermodynamic dissociation constants. Variance of the latter as a function of temperature has also been accounted for. The differing magnitudes of thermodynamic dissociation constants of the titled ligands have been explained on the basis of the non coplanar orientation of the phenyl ring in the ligands and a comparison has been made with those of unsubstituted benzoylacetone, dibenzoylmethane and acetylacetone.Following similar technique, thermodynamic stepwise and overall formation constants of the titled metal-ligand systems have been obtained and the results correlated with ligand basicity inverse metal crystal radii and second potentials of metals. Decrease in the free enthalpy (–G) of complexation reaction has also been evaluated.

---

Untersuchung der Gleichgewichte von Mn(II), Mg(II), Ca(II), Sr(II) und Ba(II) mit p-Fluor-, p.-Chlor-, p-Brom-, p-Methyl-benzoylaceton und 1-(4-Fluorphenyl)-1,3-pentanedion

Zusammenfassung Aus der potenitometrischen Titration der Titelverbindungen mit NaOH in 75 (v/v) Dioxan—Wasser bei, 20, 30 und 40°C bei konstanter Ionenstärke (=0,1M-NaClO₄) wurden die thermodynamischen Dissoziationskonstanten ermittelt. Verdünnungs-, Lösungsmittel-und Temperatureffekte wurden berücksichtigt. Die unterschiedlichen Dissoziationskonstanten werden mit der Nichtplanarität des Phenylrings in den Liganden erklärt. Außerdem wurden die Komplexbildungskonstanten bestimmt; sie sind in die Diskussion miteinbezogen.

     

Differential pulse polarographic determination of trace amounts of vanadium and molybdenum in various standard alloys and environmental samples after preconcentration of their morpholine-4-carbodithioates on microcrystalline naphthalene or morpholine-4-dithiocarbamate cetyltrimethyl-ammonium bromide-naphthalene adsorbent

A highly selective, sensitive, and fairly rapid and economical differential pulse polarographic (DPP) method has been reported for the determination of trace amounts of vanadium and molybdenum in standard alloys and various environmental samples. The morpholine-4-carbodithioates of these metals were retained (>99% recovery) quantitatively on microcrystalline naphthalene in the pH range 4.5-6.9 for vanadium and 1.5-4.5 for molybdenum. These metals were determined by DPP after desorption with 10 ml of 1 M HCl. Vanadium and molybdenum may also be preconcentrated by passing their aqueous solutions under similar conditions on morpholine-4-dithiocarbamate CTMAB-naphthalene adsorbent packed in a column at a flow rate of 1-5 ml min(-1) and determined similarly. The detection limits are 0.20 ppm for vanadium and 0.04 ppm for molybdenum at minimum instrumental settings (signal to noise ratio=2). The linearity is maintained in the following concentration ranges, vanadium 0.50-10.0 and molybdenum 0.10-9.0 ppm, with a correlation factor of 0.9996 (confidence interval of 95%, slopes 0.0196 and 0.01497 muA mug(-1), intercepts 3.65x10(-3) and -1.92x10(-3) respectively) and relative standard deviation of 1.1% in the microcrystalline method, while in the column method, the linearity is maintained in the concentration ranges, 0.50-6.5 for vanadium and 0.10-5.5 ppm for molybdenum with correlation factor of 0.9994 (with confidence interval of 95%, slopes 0.0194, 0.015 muA mug(-1), intercepts 3.60x10(-3) and -1.90x10(-3) respectively) and relative standard deviation of 1.4%. Various parameters such as the effect of pH, reagent, naphthalene and CTMAB concentrations, volume of aqueous phase and interference of a large number of metal ions on the estimation of vanadium and molybdenum have been studied in detail to optimize the conditions for their voltammetric determination at trace level in various standard alloys and environmental samples.     

Analysis of degradation products by thermal volatilization analysis at subambient temperatures

In the subambient thermal volatilization analysis (TVA) technique, degradation products initially at ?196°C are allowed to warm up to ambient temperature in a controlled manner under vacuum conditions, and volatilization from the sample tube to a trap at ?196°C is monitored by means of a Pirani gauge. The technique is discussed in relation to earlier TVA work in which volatilization from a heated polymer sample was followed. Design and operation of a subambient TVA system are described, and examples of the application of the technique to the study of the degradation products of seven polymers are considered.     

Electrical conduction in copper vanadate

A.C. and d.c. electrical conductivities, thermoelectric power and dielectric constant of copper vanadate (CuV₂O₆) have been measured in the temperature range 300–1000 K in order to discuss the electrical conduction in the compound. The extrinsic conduction, which takes place below 500 K, has been explained by small polaron hopping mechanism while intrinsic conduction, which takes place above 500 K, has been explained by large polaron band mechanism in view of the values of activation energy and charge carrier mobility in the temperature ranges 300–500 K and 500–1000 K.     

Mössbauer spectroscopy study of iron corrosion underneath painting system

The effect of pigments on the development of corrosion products between the painting system and metal surface when exposed to marine environments has been discussed. The pigments studied were; Red Mud Zinc chromate, Zinc chromate, Red oxide Zinc Phosphate, Manganese Phosphate Barium chromate and Basic Lead Silico Chromate. Mossbauer Spectroscopy revealed that the upper rust layer in all the cases consisted of-Fe203,-FeOOH and-FeOOH. The lower rust layer immediately in contact with the metal surface consisted of an asymmetrical doublet due to -FeOOH.