Two Cu2 and Zn2 metallamacrocycles featuring a novel extended pi-conjugated carbazole bridge

Two neutral dinuclear metallamacrocycles, [Cu2(hbca)2].2CHCl3.2H2O (1) and [Zn2(hbca)2].7H2O (2), have been assembled from reactions of the new rigid carbazole-based ligand H2hbca [N,N'-bis(2-hydroxobenzylidene)-9H-carbazole-3,6-diamine] with copper(II) or zinc(II) acetate. The extended aromatic ligand spacer is responsible for intermetallic antiferromagnetic exchange, which is rationalized using the spin-polarization formalism with the help of density functional theory calculations.     

Photochemical degradation of the hazardous dye Safranin-T using TiO2 catalyst

Aqueous solutions of Safranin-T, a hazardous textile dye, are photodegraded under ultraviolet light using TiO2 as catalyst. The process has been carried out at different pHs, amounts of catalyst, concentrations of the dye, and effects of the electron acceptor H2O2. It is found that under the influence of TiO2 as catalyst the colored solution of the dye Safranin-T becomes colorless and the process follows first-order reaction kinetics. The optimum conditions for the degradation of the dye have been found as 5.0x10(-5) M dye concentration, pH 5.7, and 12 mg catalyst dose. In order to evaluate the effect of the electron acceptor, the effect of H2O2 on the degradation process is also monitored and it is found that generation of hydroxyl radicals and retardation of electron-hole recombination takes place. Measuring chemical oxygen demand also monitors the toxicity of the degraded dye solution and a significant decrease is observed, which implies that the photodegradation through TiO2 is a safer technique.     

5-Aminolevulinic acid-induced protoporphyrin-IX accumulation and associated phototoxicity in macrophages and oral cancer cell lines

Studies were carried out on 5-aminolevulinic acid (ALA)-induced protoporphyrin (PpIX) synthesis in mice peritoneal macrophages and two human oral squamous cell carcinoma (OSCC) cell lines NT8e and 4451. Cells were treated with 200 microg/ml ALA for 15 h and PpIX accumulation was monitored by spectrofluorometry and phototoxicity to red light (630+/-20 nm) was measured by MTT assay. PpIX accumulation was higher in macrophages as compared to OSCC cells under both normal serum concentration (10%) and conditions of serum depletion. The results on phototoxicity measurements correlated well with the levels of PpIX accumulation in both macrophages and cancer cells. While red light caused 20% phototoxicity in macrophages, no phototoxicity was seen in 4451 cells at 10% serum. Decrease in serum concentration to 5% and 1% led to higher phototoxicity corresponding to 40% and 70% in macrophages and 10% and 15% in 4451 cells. Similar results were obtained in NT8e cell line. Propidium iodide staining followed by fluorescence microscopic observations on photodynamically treated co-culture of murine or human macrophages and cancer cells showed selective damage to macrophages. These results suggest that in OSCC, macrophages would contribute more to tumor PpIX level than tumor cells themselves and PDT may lead to selective killing of macrophages at the site of treatment. Since macrophages are responsible for production and secretion of various tumor growth mediators, the effect of selective macrophage killing on the outcome of PDT would be significant.     

Separation of Am(III) from nitric acid medium by phosphonium ionic liquid–hydroxyacetamide mixture

A strongly hydrophobic phosphonium ionic liquid, trihexyltet radecylphosphonium bis(trifluoromethanesulfonyl)imide ([P₆₆₆₁₄][NTf₂]) was employed as the diluent for the extraction behavior of Am(III) using N,N-dihexyl-2-hydroxyacetamide(DHHy) as extractant. The extractibility of americium(III) in [P₆₆₆₁₄][NTf₂] phase was measured as a function of various parameters such as aqueous phase acidity (0.1–8 M), extractant concentration (0.01–0.15 M), equilibration time (5–120 min) and temperature (298–333 K). The extraction performance observed in DHHy/[P₆₆₆₁₄][NTf₂] was compared with those observed in N,N-dihexyloctamide (DHOA) in [P₆₆₆₁₄][NTf₂] and DHHy in other diluents such as [C₄mim][NTf₂] and n-dodecane. The effect of temperature on D _Am(III) in ionic liquid system and recovery of Am(III) from the loaded phase were ascertained in detail.     

Highly porous disk-like shape of Co<Subscript>3</Subscript>O<Subscript>4</Subscript> as an anode material for lithium ion batteries

A novel disk-like shape of Co₃O₄ with high porosity was synthesized by a facile hydrothermal approach followed by calcination at 485 °C for 2 h. In order to further confirm the crystal structure, morphology, particle size, surface area, and porosity of the sample, a series of corresponding characterization techniques were used. The disk-like shape of Co₃O₄ as an anode delivered excellent rate capability such as 510.5 mAh g^?1 at 4.0 C, which is much higher than the theoretical capacity of commercial graphite anode (372 mAh g^?1). However, the electrode could not recover the high capacity during the long-term cycling at various higher current rates due to the deformation of the structure as confirmed by the ex situ studies. It is believed that the obtained remarkable structural feature with numerous void pores within the structure may be helpful for short-term cycling due to the large contact areas between the electrode and the electrolyte and a shorter diffusion length for lithium ion insertion but unable to act as a buffer to relax the volume expansion/contraction and alleviate the structural damage of the electrode during long-term cycling.     

Spatially polarizing autocloned elements

A space-variant polarization converting element is introduced that utilizes an autocloning effect to produce high aspect ratio from birefringent gratings. This method utilizes a multilayer deposition process on a template to convert a linearly polarized incident beam to an azimuthally polarized output at a wavelength of 1.55 microm with more than 90% efficiency.     

Heat transfer and fluid flow analysis of artificially roughened ducts having rib and groove roughness

Artificially roughness is one of the well known methods of enhancing heat transfer from the heat transfer surface in the form of repeated ribs, grooves or combination of ribs and groove (compound turbulators). The artificial roughness produced on the heat transferring surface is used in cooling of gas turbine blades, nuclear reactor, solar air heating systems etc. Solar air heaters have wide applications in low to moderate temperature range, namely, drying of foods, agricultural crops, seasoning of wood and space heating etc. Solar air heaters have low value of convective heat transfer coefficient between the working fluid (air) and the heat transferring surface, due to the formation of thin laminar viscous sub-layer on its surface. The heat transfer from the surface can be increased by breaking this laminar viscous sub layer. Hence, in the present work compound turbulators in the form of integral wedge shaped ribs with grooves are used on the heat transfer surface, to study its effect on the heat transfer coefficient (Nusselt number) and friction factor in the range of Reynolds number 3,000–18,000. The roughness produced on the absorber plate forms the wetted side of upper broad wall of the rectangular duct of solar air heater. The relative groove position (g/p) was varied from 0.4 to 0.8 and the wedge angle (Φ) was varied from 10° to 25°, relative roughness pitch (p/e) and relative roughness height (e/D) was maintained as 8.0 and 0.033 respectively. The aspect ratio of the rectangular duct was maintained as 8. The Nusselt number and friction factor of the artificially roughened ducts were determined experimentally and the corresponding values were compared with that of smooth surface duct. It is observed that wedge-groove roughened surface shows more enhancement in heat transfer compared to only rib roughened surface arrangement. The investigation revealed that Nusselt number increases 1.5–3 times, while the friction factor increases two to three folds that of the smooth surface duct in the range of operating parameters. It is also observed that in rib–groove roughness arrangement with relative groove position of 0.65 shows the maximum enhancement in the heat transfer compared to the other rib-groove roughness arrangements. Statistical correlations for the Nusselt number and friction factor have been developed by the regression method in terms of the operating and roughness parameters. A program was also developed in MATLAB for the calculation of thermal efficiency and thermal effectiveness. It was observed that the thermal efficiency is more for wedge angle of 15° and relative groove position of 0.65 and its value ranges from 42 to 73 %. The uncertainties in the measurements due to various instruments for the Reynolds number, Nusselt number, and friction factor have been estimated as ±3.8, ±4.54 and ±7.6 % respectively in the range of investigation made.     

On the correlation between supercooling,superheating and kinetic arrest in a magnetic glass Pr<Subscript>0.5</Subscript>Ca<Subscript>0.5</Subscript>Mn<Subscript>0.975</Subscript>Al<Subscript>0.025</Subscript>O<Subscript>3</Subscript>

We report a quantitative investigation of the magnetic field-temperature phase diagram by taking into account a simple phenomenological model arising out of the interplay of kinetic arrest and thermodynamic transitions in a magnetic glass Pr_0.5Ca_0.5Mn_0.975Al_0.025O₃, through magnetization measurements. Such studies are necessary as kinetic arrest plays an important role in the formation of “magnetic glasses”, which has been observed in systems undergoing first order magnetic phase transitions. It has been shown that disorder in a system results in the formation kinetic arrest (H _K ,T _K ) band, like supercooling (H ^*,T ^*) and superheating (H ^**,T ^**) band. Quantitative proofs are given to show that (H _K ,T _K ) band is anticorrelated with (H ^*,T ^*) and (H ^**,T ^**) bands, while the later two are correlated among themselves. Analysis of time dependence of magnetization at different temperatures is carried out to establish the fact that the kinetic arrested state is different from the supercooled state.     

Conformationally averaged vertical detachment energy of finite size NO3(-)·nH2O clusters: a route connecting few to many

We report conformationally averaged VDEs (VDE(w)(n)) for different sizes of NO(3)(-)·nH(2)O clusters calculated by using uncorrelated HF, correlated hybrid density functional (B3LYP, BHHLYP) and correlated ab intio (MP2 and CCSD(T)) theory. It is observed that the VDE(w)(n) at the B3LYP/6-311++G(d,p), B3LYP/Aug-cc-Pvtz and CCSD(T)/6-311++G(d,p) levels is very close to the experimentally measured VDE. It is shown that the use of calculated results of the conformationally averaged VDE for small-sized solvated negatively-charged clusters and a microscopic theory-based general expression for the same provides a route to obtain the VDE for a wide range of cluster sizes, including bulk.