Multilayer nitroazobenzene films covalently attached to carbon. An AFM and electrochemical study

Nitroazobenzene films have been grafted to pyrolyzed photoresist films by electrochemical reduction of the corresponding diazonium salt in acetonitrile solution. Two component films were also prepared by electrochemically grafting methylbenzene layers to preformed NAB films. Voltammetric investigation of the films in aqueous acid medium and the measurement of film thickness using atomic force microscopy (AFM) lead to new insights into film structure. In aqueous acid solution, the azobenzene groups have no detectable electroactivity and not all nitro groups in the films can be reduced. These findings point to a compact film structure in which proton diffusion is limited. There may also be spatial inhibition of the conformational changes that accompany azobenzene reduction. For increasingly thick NAB films, the peak for reduction of the nitro groups moves to more negative potentials and the peaks become more asymmetric in shape. These changes are interpreted in terms of the dielectric properties and the rate of proton diffusion in the films. Film thickness was measured by ploughing through the film with an AFM tip. When an NAB film prepared in acetonitrile solution is reduced in aqueous acid, the film thickness decreases by more than 50%. The changes can be partially reversed by treatment in acetonitrile-electrolyte solution and hence are attributed to ion-solvent induced swelling and shrinking. Thus, the large decrease in thickness detected by AFM after treatment of the film in aqueous acid is consistent with the compact film structure revealed by electrochemistry.     

A novel series of oligomers from 4-aminomethyl-tetrahydrofuran-2-carboxylates with 2,4-cis and 2,4-trans stereochemistry

Two tetrahydrofuran-based γ-amino acids [2,4-cis and 2,4-trans] were subjected to iterative peptide-coupling procedures to afford dimeric, tetrameric and hexameric carbopeptoids in good yield. These homooligomers were prepared for secondary structural study—to ascertain the conformational preference inherent in the monomer units. The l-xylo oligomers were protected with triethylsilyl ethers to increase the range of solvents suitable for structural investigation. Initial secondary structure data indicate the presence of hydrogen-bonded conformations in the l-ribo series.     

Preparation of benzyne complexes of group 10 metals by intramolecular suzuki coupling of ortho-metalated phenylboronic esters: molecular structure of the first benzyne-palladium(0) complex

A series of nickel(II) and palladium(II) aryl complexes substituted in the ortho position of the aromatic ring by a (pinacolato)boronic ester group, [MBr[o-C(6)H(4)B(pin)]L(2)] (M = Ni, L(2) = 2PPh(3) (2a), 2PCy(3) (2b), 2PEt(3) (2c), dcpe (2d), dppe (2e), and dppb (2f); M = Pd, L(2) = 2PPh(3) (3a), 2PCy(3) (3b), and dcpe (3d)), has been prepared. Many of these complexes react readily with KO(t)Bu to form the corresponding benzyne complexes [M(eta(2)-C(6)H(4))L(2)] (M = Ni, L(2) = 2PPh(3) (4a), 2PCy(3) (4b), 2PEt(3) (4c), dcpe (4d); M = Pd, L(2) = 2PCy(3) (5b)). This reaction can be regarded as an intramolecular version of a Suzuki cross-coupling reaction, the driving force for which may be the steric interaction between the boronic ester group and the phosphine ligands present in the precursors 2 and 3. Complex 3d also reacts with KO(t)Bu, but in this case disproportionation of the initially formed eta(2)-C(6)H(4) complex (5d) leads to a 1:1 mixture of a novel dinuclear palladium(I) complex, [(dcpe)Pd(mu(2)-C(6)H(4))Pd(dcpe)] (6), and a 2,2'-biphenyldiyl complex, [Pd(2,2'-C(6)H(4)C(6)H(4))(dcpe)] (7d). Complexes 2a, 3b, 3d, 4b, 5b, 6, and 7d have been structurally characterized by X-ray diffraction; complex 5b is the first example of an isolated benzyne-palladium(0) species.     

Comparison of the phytoestrogen trans-resveratrol (3,4',5-trihydroxystilbene) structures from x-ray diffraction and solution NMR

The NMR-derived solution structure of trans-3,4',5-trihydroxystilbene (resveratrol) was compared with two recent literature crystal x-ray structures, resveratrol in complex with human transthyretin (TTR-RES) from 1DVS.pdb and resveratrol bound to chalcone synthase (CHS-RES) from 1CGZ.pdb. 1H and 13C NMR spectra of resveratrol were acquired in DMSO-d6. Assignments were obtained from an analysis of DQF-COSY, TOCSY, DEPT, HMQC/HSQC, HMBC and INADEQUATE NMR spectra. Past 1H and 13C NMR literature assignments are corrected. The dihedral angle 2-1-1'-2' provides an indication of the relative spatial orientation of the two phenolic rings. Values of 1.62, - 54.10 and 12.6 +/- 1.1 degrees were found for the 1DVS.pdb, 1CGZ.pdb and NMR resveratrol structures, respectively. The 1DVS.pdb resveratrol structure is 'flat' with the two phenolic rings along the same plane. The 1CGZ.pdb structure has these two rings almost orthogonal to each other, and the NMR structure has these two rings much closer to being along the same plane. The angles 1-alpha--alpha' and 1'-alpha'--alpha are along the same trace and of similar magnitude for the 1CGZ.pdb and NMR resveratrol structures. For the 1DVS.pdb resveratrol structure, these angles are about 7-10 degrees greater, with alpha and alpha' being 180 degrees out-of-phase from the other two structures. The alpha rings did not overlap, with the NMR result representing a 'median model' of the two x-ray structures.     

A direct injection high-throughput liquid chromatography tandem mass spectrometry method for the determination of a new orally active alphavbeta3 antagonist in human urine and dialysate

A generic high-throughput liquid chromatography (HTLC) tandem mass spectrometry (MS/MS) assay for the determination of compound I in human urine and dialysate (hemodialysis) was developed and validated. By using the HTLC on-line extraction technique, sample pretreatment was not necessary. The sample was directly injected onto a narrow bore large particle size extraction column (50 x 1.0 mm, 60 microm) where the sample matrix was rapidly washed away using a high flow rate (5 mL/min) aqueous mobile phase while analytes were retained. The analytes were subsequently eluted from the extraction column onto an analytical column using an organic-enriched mobile phase prior to mass spectrometric detection. The analytes were then eluted from the analytical column to the mass spectrometer for the determination. The linear dynamic range was 2.0-6000 ng/mL for the urine assay and 0.1-300 ng/mL for the dialysate assay. Intraday accuracy and precision were evaluated by analyzing five replicates of calibration standards at all concentrations used to construct the standard curve. For the urine assay, the precision (RSD%, n=5) ranged from 1.9 to 8.0% and the accuracy ranged from 87.8 to 105.2% of nominal value. For the dialysate assay, the precision (RSD%, n=5) ranged from 1.1 to 10.0% and the accuracy from 94.5 to 105.2% of nominal value. In-source fragmentation of the acyl glucuronide metabolite (compound III) did not interfere with the determination of parent compound I. The developed HTLC/MS/MS methodology was specific for compound I in the presence of compound III. Column life-time is increased and sample analysis time is decreased over traditional reversed-phase methods when direct injection assays for urine and dialysate are coupled with the technology of HTLC.     

The binding of single-stranded DNA and PNA to single-walled carbon nanotubes probed by flow linear dichroism

The binding of single-stranded DNAs and a neutral DNA analogue (peptide nucleic acid, PNA) to single-walled carbon nanotubes in solution phase has been probed by absorbance spectroscopy and linear dichroism. The nanotubes are solubilised by aqueous sodium dodecyl sulfate, in which the nucleic acids also dissolve. The linear dichroism (LD) of the nanotubes, when subtracted from that due to the nanotubes/nucleic acid samples, gives the LD of the bound nucleic acid. The binding of the single-stranded DNA to the single-walled nanotubes is quite different from that previously observed for double-stranded DNA. It is likely that the nucleic acid bases lie flat on the nanotube surface with the backbone wrapping round the nanotube at an oblique angle in the region of 45 degrees . The net effect is like beads on a string. The base orientation with the single-stranded PNA is inverted with respect to that of the single-stranded DNA, as shown by their oppositely signed LD signals.     

Palladium salicylaldimine complexes containing boronate esters

Reactions of salicylaldehydes with boronate ester derivatives of aniline have been examined. Addition of these Schiff base ligands to palladium acetate or Na₂PdCl₄ afforded novel boron-containing trans-bis(N-arylsalicylaldiminato) palladium complexes.Condensation of salicylaldehyde (2-HOC₆H₄C(O)H) with H₂NC₆H₄Bpin (pin=1,2-O₂C₂Me₄) afforded the boron-containing Schiff bases, 2-HOC₆H₄C(H)=NC₆H₄Bpin (1–3a). Similar reactivity with 2-hydroxy-5-nitrobenzaldehyde and 2-hydroxy-1-naphthaldehyde gave the corresponding Schiff bases (1-3b) and (1-3c), respectively. Reaction of Schiff bases (2) and (3) with palladium acetate or Na₂PdCl₄ afforded complexes of the type PdL₂ (4,5), where L=deprotonated Schiff base. The molecular structure of the nitro-salicylaldehyde 4-Bpin palladium complex (5b) was characterized by an X-ray diffraction study. All new palladium compounds have been characterized fully and tested for their antifungal activity against Aspergillus niger and Aspergillus flavus.     

Stereochemically stable double-helicate dinuclear complexes of bis(dipyrromethene)s: a chiroptical study

Helical zinc(II) complexes of bis(dipyrromethene)s bearing homochiral amide substituents were synthesized. Analysis of the products by chiral HPLC showed two diastereomeric major products and showed that dipyrromethene double-nuclear helicates are stereochemically stable and do not interconvert. Circular dichroism (CD) studies showed that the complexation reactions had proceeded with modest diastereomeric excesses. Analysis of an analogous symmetric zinc(II) bis(dipyrromethene) lacking homochiral substituents that could act as chromophores discounted induced CD by the chiral auxiliaries.     

Stereoselective 1,2-cis glycosylation of 2-O-allyl protected thioglycosides

The technique of intramolecular aglycon delivery (IAD), whereby a glycosyl acceptor is temporarily appended to a hydroxyl group of a glycosyl donor is an attractive method that can allow the synthesis of 1,2-cis glycosides in an entirely stereoselective fashion. 2-O-Allyl protected thioglycoside donors are excellent substrates for IAD, and may be glycosylated stereoselectively through a three-step reaction sequence. This sequence consists of quantitative yielding allyl bond isomerisation, to produce vinyl ethers that can then undergo N-iodosuccinimide mediated tethering of the desired glycosyl acceptor, and subsequent intramolecular glycosylation, to yield either alpha-glucosides or beta-mannosides accordingly. Although attempted one-pot tethering and glycosylation is hampered by competitive intermolecular reaction with excess glycosyl acceptor, this problem can be simply overcome by the use of excess glycosyl donor. Allyl mediated IAD is a widely applicable practical alternative to other IAD approaches for the synthesis of beta-mannosides, that is equally applicable for alpha-gluco linkages. It is advantageous in terms of both simplicity of application and yield, and in addition has no requirement for cyclic 4,6-protection of the glycosyl donor.     

Determination of capsaicinoids in salsa by liquid chromatography and enzyme immunoassay

Two simple and rapid methods were developed to monitor pungency of salsa in production. Capsaicin (C) and dihydrocapsaicin (DHC) were quantitated in 17 commercially available tomato-based salsas by enzyme immunoassay (EIA) and liquid chromatography (LC) with fluorescent detection. Samples were extracted with methanol and the extracts were subjected to solid-phase extraction (SPE) using polystyrene-divinylbenzene columns. Analysis of SPE eluates showed good correlation (r2 = 0.953) between LC and EIA, with a slightly high bias for EIA. Salsa fortified with C and DHC from 0.118 to 103.2 microg/g resulted in recoveries of 90-112% (C) and 76-97% (DHC). Limits of detection by LC were 0.1 microg/g for each capsaicinoid and 0.1 microg/g by EIA for total capsaicinoids. The LC on-column response was linear from 0.2 to 100 ng for both C and DHC, whereas the working range for EIA was 0.1-2.0 ppm. Pungency varied between different salsa brands labeled mild, medium, and hot.