Adaptation of electrodes and printable gel polymer electrolytes for optimized fully organic batteries

Despite intensive scientific efforts on the development of organic batteries, their full potential is still not being realized. The individual components, such as electrode materials and electrolytes, are in most cases developed independently and are not adjusted to each other. In this context, we report on the performance optimization of a full-organic solid-state battery system by the mutual adaptation of the electrode materials and an ionic liquid (IL)-based gel polymer electrolyte (GPE). The formulation of the latter was designed for a one-step manufacturing approach and can be applied directly to the electrode surface, where it is UV-cured to yield the GPE without further post-treatment steps. Herein, a special focus was placed on the applicability in industrial processes. A first significant capacity increase was achieved by the incorporation of the IL into the electrode composite. Furthermore, the GPE composition was adapted applying acrylate- and methacrylate-based monomers and combinations thereof with the premise of a fast curing step. Furthermore, the amount of IL was varied, and all combinations were evaluated for their final performance in cells. The latter variation revealed that a high ionic conductivity is not the only determining factor for a good cell performance. Next to a sufficient conductivity, the interaction between electrode and electrolyte plays a key role for the cell performance as it enhances the accessibility of the counter ions to the redox-active sites.     

Highly Emissive 9-Borafluorene Derivatives: Synthesis,Photophysical Properties and Device Fabrication

A series of 9-borafluorene derivatives, functionalised with electron-donating groups, have been prepared. Some of these 9-borafluorene compounds exhibit strong yellowish emission in solution and in the solid state with relatively high quantum yields (up to 73.6 % for FMesB-Cz as a neat film). The results suggest that the highly twisted donor groups suppress charge transfer, but the intrinsic photophysical properties of the 9-borafluorene systems remain. The new compounds showed enhanced stability towards the atmosphere, and exhibited excellent thermal stability, revealing their potential for application in materials science. Organic light-emitting diode (OLED) devices were fabricated with two of the highly emissive compounds, and they exhibited strong yellow-greenish electroluminescence, with a maximum luminance intensity of >22 000 cd m⁻². These are the first two examples of 9-borafluorene derivatives being used as light-emitting materials in OLED devices, and they have enabled us to achieve a balance between maintaining their intrinsic properties while improving their stability.     

2- and 2,7-Substituted para-N-Methylpyridinium Pyrenes: Syntheses,Molecular and Electronic Structures,Photophysical, Electrochemical,and Spectroelectrochemical Properties and Binding to Double-Stranded (ds) DNA

Two N-methylpyridinium compounds and analogous N-protonated salts of 2- and 2,7-substituted 4-pyridyl-pyrene compounds were synthesised and their crystal structures, photophysical properties both in solution and in the solid state, electrochemical and spectroelectrochemical properties were studied. Upon methylation or protonation, the emission maxima are significantly bathochromically shifted compared to the neutral compounds, although the absorption maxima remain almost unchanged. As a result, the cationic compounds show very large apparent Stokes shifts of up to 7200 cm⁻¹. The N-methylpyridinium compounds have a single reduction at ca. −1.5 V vs. Fc/Fc⁺ in MeCN. While the reduction process was reversible for the 2,7-disubstituted compound, it was irreversible for the mono-substituted one. Experimental findings are complemented by DFT and TD-DFT calculations. Furthermore, the N-methylpyridinium compounds show strong interactions with calf thymus (ct)-DNA, presumably by intercalation, which paves the way for further applications of these multi-functional compounds as potential DNA-bioactive agents.     

The Photophysics and Photochemistry of Melanin- Like Nanomaterials Depend on Morphology and Structure

Melanin-like nanomaterials have found application in a large variety of high economic and social impact fields as medicine, energy conversion and storage, photothermal catalysis and environmental remediation. These materials have been used mostly for their optical and electronic properties, but also for their high biocompatibility and simplicity and versatility of preparation. Beside this, their chemistry is complex and it yields structures with different molecular weight and composition ranging from oligomers, to polymers as well as nanoparticles (NP). The comprehension of the correlation of the different compositions and morphologies to the optical properties of melanin is still incomplete and challenging, even if it is fundamental also from a technological point of view. In this minireview we focus on scientific papers, mostly recent ones, that indeed examine the link between composition and structural feature and photophysical and photochemical properties proposing this approach as a general one for future research.     

Wastes from Wood Extraction Used in Composite Materials: Behavior after Accelerated Weathering

New materials were obtained by incorporating in polypropylene (PP) matrix 60% wood wastes resulting after extraction with supercritical carbon dioxide, water, and ethanol. Structural, mechanical, thermal, and rheological characterizations, as well as moisture uptake of the composites, were evaluated before and after accelerated weathering. It was found that the extraction method influenced the composite properties due to the hydrophilic-hydrophobic balance. The addition of extracted fibers results in an increase in hardness and tensile properties and a decrease of impact strength as compared to PP.     

Thermal behaviour of some novel antimicrobials based on complexes with a Schiff base bearing 1,2,4-triazole pharmacophore

A series of complexes of type [ML(CH₃COO)(OH₂)₂] (M: Co, Ni; HL: 2-[(E)-1H-1,2,4-triazol-3-ylimino)methyl]phenol)) and [M₂L₂(CH₃COO)₂(OH₂)_n] (M: Cu, n = 2; M: Zn, n = 0) were synthesised by template condensation. The compounds were characterised with microanalytical, ESI–MS, IR, electronic, EPR spectra and magnetic data at room temperature. Based on the IR and ESI–MS spectra, a dinuclear structure with the acetate as bridge was proposed for Cu(II) and Zn(II) complexes. The dinuclear structure of Cu(II) complex is also consistent with both magnetic behaviour and EPR spectrum. The thermal analyses have evidenced processes as water elimination, acetate decomposition, as well as oxidative degradation of the Schiff base. The final decomposition product was the most stable metal oxide as indicated by powder X-ray diffraction. The cobalt and copper compounds exhibited a broad spectrum of antibacterial activity towards both planktonic and biofilm-embedded cells. The complexes exhibit a low cytotoxicity except for Cu(II) species that induces the early apoptosis for the HEp 2 cells.     

Transfer Hydrogenation of Ketones Catalyzed by Surface‐Active Ruthenium and Rhodium Complexes in Water

An improved, high‐yield, one‐pot synthetic procedure for water‐soluble ligands functionalized with trialkyl ammonium side groups H₂N(CH₂)₂NHSO₂‐p‐C₆H₄CH₂[NMe₂(C_nH_2n+1)]⁺ ( [HL ⁿ ]⁺ ; n=8, 16) was developed. The corresponding new surface‐active complexes [(p‐cymene)RuCl( L ⁿ )] and [Cp*RhCl( L ⁿ )] (Cp*=η⁵‐C₅Me₅) were prepared and characterized. For n=16 micelles are formed in water at concentrations as low as 0.6 mM , as demonstrated by surface‐tension measurements. The complexes were used for catalytic transfer hydrogenation of ketones with formate in water. Highly active catalyst systems were obtained in the case of complexes bearing C₁₆ tails due to their ability to be adsorbed at the water/substrate interface. The scope of these catalyst systems in aqueous solutions was extended from partially water soluble aryl alkyl ketones (acetophenone, butyrophenone) to hydrophobic dialkyl ketones (2‐dodecanone).     

Exploring the Molecular Structure of Imidazolium–Silica‐Based Nanoparticle Networks by Combining Solid‐State NMR Spectroscopy and First‐Principles Calculations

A DFT‐based molecular model for imidazolium–silica‐based nanoparticle networks (INNs) is presented. The INNs were synthesized and characterized by using small‐angle X‐ray scattering (SAXS), NMR spectroscopy, and theoretical ab initio calculations. ¹¹B and ³¹P HETCOR CP MAS experiments were recorded. Calculated ¹⁹F NMR spectroscopy results, combined with the calculated anion–imidazolium (IM) distances, predicted the IM chain density in the INN, which was also confirmed from thermogravimetric analysis/mass spectrometry results. The presence of water molecules trapped between the nanoparticles is also suggested. First considerations on possible π–π stacking between the IM rings are presented. The predicted electronic properties confirm the photoluminescence emissions in the correct spectral domain.     

Insights into the Decomposition of Olefin Metathesis Precatalysts

The decomposition of a series of benzylidene, methylidene, and 3‐phenylindenylidene complexes has been probed in alcohol solution in the presence of base. Tricyclohexylphosphane‐containing precatalysts are shown to yield [RuCl(H)(H₂)(PCy₃)₂] in isopropyl alcohol solutions, while 3‐phenylindenylidene complexes lead to η⁵‐(3‐phenyl)indenyl products. The potential‐energy surfaces for the formation of the latter species have been probed using density functional theory studies.     

On the Formation of a Protic Ionic Liquid in Nature

The practical utility of ionic liquids (ILs) makes the absence (heretofore) of reported examples from nature quite puzzling, given the facility with which nature produces many other types of exotic but utilitarian substances. In that vein, we report here the identification and characterization of a naturally occurring protic IL. It can be formed during confrontations between the ants S. invicta and N. fulva. After being sprayed with alkaloid‐based S. invicta venom, N. fulva detoxifies by grooming with its own venom, formic acid. The mixture is a viscous liquid manifestly different from either of the constituents. Further, we find that the change results as a consequence of formic acid protonation of the N centers of the S. invicta venom alkaloids. The resulting mixed‐cation ammonium formate milieu has properties consistent with its classification as a protic IL.