New artificial receptors from selectively functionalized calix[4]arenes

Abstract

The development of new synthetic methods for the monoalkylation of calix[4]arenes at the lower rim allows the synthesis of a new class of trihydroxamate siderophores. Three chelating hydroxamic acid units are introduced through a sequence of reactions which blocks the macrocycle in the cone conformation. The new ligands obtained form neutral 1:1 complexes (FeL) with iron (III), which are stable in EtOH/H₂O 9:1 at pH 2–7. Calix[4]arene bis-crown ethers are prepared by exploiting the selective 1,2-(proximal) functionalization of calix[4]arenes at the lower rim. These ligands are, however, less effective in complexing alkali metal cations compared with the 1,3-calix[4]arene crown-ethers which, in their partial cone structure, offer a better shielding for the complexed cations. Rigid upper rim-bridged calix[4]arenes potentially useful for the inclusion of neutral molecules are prepared by exploiting the selective 1,3-diformylation of calix[4]arene at the upper rim. Finally a new chloromethylation method for calix[4]arenes blocked in the cone conformation is described together with the synthesis of new cavitands.     

Mycotoxin profile of Fusarium langsethiae isolated from wheat in Italy: production of type‐A trichothecenes and relevant glucosyl derivatives

Fusarium langsethiae, formally described as a new species over a decade ago, has been identified as the main producer of HT‐2 (HT2) and T‐2 (T2) toxins in Europe in small cereal grains. Mycotoxin contamination caused by this Fusarium species can represent a food safety hazard that deserves further attention. In the present work, the mycotoxin profile in wheat cultures of F. langsethiae is presented with particular reference to the production of major type‐A trichothecenes and their glucosyl derivatives. F. langsethiae isolates, representative of the major Italian wheat cultivation areas, were tested for the production of T2, HT2, diacetoxyscirpenol (DAS) and neosolaniol (NEO), and relevant glucosyl derivatives. Liquid chromatography‐tandem mass spectrometry (LC‐MS/MS) was used for the identification and chemical characterization of these metabolites. F. langsethiae isolates under investigation resulted to be potent producers of T2, HT2 and NEO. Furthermore, a well‐defined set of isolates, all originating from Central Italy, produced also DAS. All isolates were found to be able to produce HT2 glucosyl derivatives, whereas only traces of T2 glucoside were detected in one sample. Furthermore, two mono‐glucosyl derivatives of NEO and one mono‐glucoside derivative of DAS were identified and characterized. The screening for the presence/absence of glucosylated trichothecenes in analyzed fungal extracts revealed a general co‐occurrence of these derivatives with the parent toxin at levels that could be roughly estimated to account up to 37% of the relevant unconjugated toxin. This is the first report of the production of glucosylated trichothecenes by F. langsethiae cultured on small grains. Copyright © 2013 John Wiley & Sons, Ltd.     

Characterization of nanochannel delivery membrane systems for the sustained release of resveratrol and atorvastatin: new perspectives on promoting heart health

Novel drug delivery systems capable of continuous sustained release of therapeutics have been studied extensively for use in the prevention and management of chronic diseases. The use of these systems holds promise as a means to achieve higher patient compliance while improving therapeutic index and reducing systemic toxicity. In this work, an implantable nanochannel drug delivery system (nDS) is characterized and evaluated for the long-term sustained release of atorvastatin (ATS) and trans-resveratrol (t-RES), compounds with a proven role in managing atherogenic dyslipidemia and promoting cardioprotection. The primary mediators of drug release in the nDS are nanofluidic membranes with hundreds of thousands of nanochannels (up to 100,000/mm²) that attain zero-order release kinetics by exploiting nanoconfinement and molecule-to-surface interactions that dominate diffusive transport at the nanoscale. These membranes were characterized using gas flow analysis, acetone diffusion, and scanning and transmission electron microscopy (SEM, TEM). The surface properties of the dielectric materials lining the nanochannels, SiO₂ and low-stress silicon nitride, were further investigated using surface charge analysis. Continuous, sustained in vitro release for both ATS and t-RES was established for durations exceeding 1 month. Finally, the influence of the membranes on cell viability was assessed using human microvascular endothelial cells. Morphology changes and adhesion to the surface were analyzed using SEM, while an MTT proliferation assay was used to determine the cell viability. The nanochannel delivery approach, here demonstrated in vitro, not only possesses all requirements for large-scale high-yield industrial fabrication, but also presents the key components for a rapid clinical translation as an implantable delivery system for the sustained administration of cardioprotectants.     

Determination of phenolic compounds and authentication of PDO Lambrusco wines by HPLC-DAD and chemometric techniques

This work proposes a fast and simple method for detection and quantification of phenolic compounds in PDO Lambrusco wines using HPLC-DAD and chemometric techniques. Samples belonging to three different varieties of Lambrusco (Grasparossa, Salamino and Sorbara) were analyzed to provide a methodology appropriate for routine analysis. Given the high complexity of the sample and the coelution among chromatographic peaks, the use of chemometric techniques to extract the information of the individual eluting compounds was needed. Multivariate curve resolution-alternating least squares (MCR-ALS) allowed the resolution of the chromatographic peaks obtained and the use of this information for the quantification of the phenolic analytes in the presence of interferences. Use of multiset analysis and local rank/selectivity information was proven to be crucial for the correct resolution and quantification of compounds. The quantitative data provided by MCR-ALS about the phenolic targets and additional compounds present in the samples analyzed provided wine composition profiles, which were afterwards used to distinguish among wine varieties. Principal component analysis applied to the wine profiles allowed characterizing the wines according to their varieties.     

Molecular evaluation of soil organic matter characteristics in three agricultural soils by improved off-line thermochemolysis: The effect of hydrofluoric acid demineralisation treatment

The molecular composition of soil organic matter (SOM) in three agricultural fields under different managements, was evaluated by off-line thermochemolysis followed by gas chromatography mass spectrometry analysis (THM-GC-MS). While this technique enabled the characterization of SOM components in coarse textured soil, its efficiency in heavy textured soils was seriously affected by the interference of clay minerals, which catalyzed the formation of secondary artifacts in pyrolysates. Soil demineralization with hydrofluoric acid (HF) solutions effectively improved the reliable characterization of organic compounds in clayey soils by thermochemolysis, while did not alter significantly the results of coarse textured soil. A wide range of lignin monomers and lipids molecules, of plant and microbial origin, were identified in the pyrograms of HF treated soils, thereby revealing interesting molecular differences between SOM management practices. Our results indicated that clay removal provided by HF pretreatment enhanced the capacity of thermochemolysis to be a valuable and accurate technique to study the SOM dynamics also in heavy-textured and OC-depleted cultivated soils.     

A New Entry to Indolo[2,3-a]carbazoles

Abstract: The synthesis of the indolo[2,3-a]carbazole ring is described starting from 3-chloromethylene-1,3-dihydro-indol-2-one 5 and 3-(cyano-ethoxycarbonyl-methyl)-indole-1-carboxylic acid ethyl ester 4.     

PHI: A powerful new program for the analysis of anisotropic monomeric and exchange‐coupled polynuclear d‐ and f‐block complexes

A new program, PHI, with the ability to calculate the magnetic properties of large spin systems and complex orbitally degenerate systems, such as clusters of d‐block and f‐block ions, is presented. The program can intuitively fit experimental data from multiple sources, such as magnetic and spectroscopic data, simultaneously. PHI is extensively parallelized and can operate under the symmetric multiprocessing, single process multiple data, or GPU paradigms using a threaded, MPI or GPU model, respectively. For a given problem PHI is been shown to be almost 12 times faster than the well‐known program MAGPACK, limited only by available hardware. © 2013 Wiley Periodicals, Inc.     

Design and Synthesis of a γ1β8‐Cyclodextrin Oligomer: A New Platform with Potential Application as a Dendrimeric Multicarrier

We report the synthesis and characterization of a water‐soluble, star‐shaped macromolecular platform consisting of eight β‐cyclodextrin (β‐CD) units anchored to the narrower rim of a γ‐CD core through bis(triazolyl)alkyl spacers. The efficient synthetic protocol is based on the microwave (MW)‐promoted Cu‐catalyzed 1,3‐dipolar cycloaddition of CD monoazides to CD monoacetylenes. The ligand‐hosting capability of the construct has been assessed by relaxometric titration and nuclear magnetic relaxation dispersion (NMRD) profiling, which showed it to be good, and this was supported by molecular dynamics simulations. To demonstrate the feasibility of obtaining supramolecular structures with high hosting ability, we designed a dimeric platform, formed by joining two nonamers through the γ‐CD cores through a bis(lithocholic acid) linker. With a view to the potential biological applications, cytotoxicity and extent of binding to human serum albumin were assessed. The properties of this dendrimeric multicarrier make it suitable for pharmaceutical and diagnostic purposes, ranging from targeted drug delivery to molecular imaging.     

Nanoscale Control of Polyoxometalate Assembly: A {Mn8W4} Cluster within a {W36Si4Mn10} Cluster Showing a New Type of Isomerism

Two near isomeric clusters containing a novel {Mn₈W₄} Keggin cluster within a [W₃₆Mn₁₀Si₄O₁₃₆(OH)₄(H₂O)8]^24? cluster are reported: K₁₀Li₁₄ [W₃₆Si₄O₁₃₆Mn^II₁₀(OH)₄(H₂O)₈] ( 1 ) and K₁₀Li1_3.5Mn_0.25[W₃₆Si₄O₁₃₆Mn^II₁₀(OH)₄(H₂O)₈] ( 1′ ). Bulk characterization of the clusters has been carried out by single crystal X‐ray structure analysis, ICP‐MS, TGA, ESI‐MS, CV and SQUID‐magnetometer analysis. X‐ray analysis revealed that 1′ has eight positions within the central Keggin core that were disordered W/Mn whereas 1 contained no such disorder. This subtle difference is due to a differences is how the two clusters assemble and recrystallize from the same mother liquor and represents a new type of isomerism. The rapid recrystallization process was captured via digital microscopy and this uncovered two “intermediate” types of crystal which formed temporarily and provided nucleation sites for the final clusters to assemble. The intermediates were investigated by single crystal X‐ray analysis and revealed to be novel clusters K₄Li₂₂[W₃₆Si₄Mn₇O₁₃₆(H₂O)₈]?56 H₂O ( 2 ) and Mn₂K₈Li₁₄[W₃₆Si₄Mn₇O₁₃₆(H₂O)₈]?45 H₂O ( 3 ). The intermediate clusters contained different yet related building blocks to the final clusters which allowed for the postulation of a mechanism of assembly. This demonstrates a rare example where the use X‐ray crystallography directly facilitated understanding the means by which a POM assembled.