Ferrocene-containing carbohydrate dendrimers

Aliphatic amines, incorporating one or three (branched) acylated beta-D-glucopyranosyl residues, were coupled with the acid chloride of ferrocenecarboxylic acid and with the diacid chloride of 1,1'-ferrocenedicarboxylic acid to afford four dendrimer-type, carbohydrate-coated ferrocene derivatives in good yields (54-92%). Deprotection of the peracylated beta-D-glucopyranosyl residues was achieved quantitatively by using Zemplén conditions, affording four water-soluble ferrocene derivatives. When only one of the two cyclopentadienyl rings of the ferrocene unit is substituted, strong complexes are formed with beta-cyclodextrin in H2O, as demonstrated by liquid secondary ion mass spectrometry (LSIMS), 1H NMR spectroscopy, electrochemical measurements, and circular dichroism spectroscopy. Molecular dynamics calculations showed that the unsubstituted cyclopentadienyl ring is inserted through the cavity of the toroidal host in these complexes. The electrochemical behavior of the protected and deprotected ferrocene-containing dendrimers was investigated in acetonitrile and water, respectively. The diffusion coefficient decreases with increasing molecular weight of the compound. The potential for oxidation of the ferrocene core, the rate constant of heterogeneous electron transfer, and the rate constant for the energy-transfer reaction with the luminescent excited state of the [Ru(bpy)3]2+ complex (bpy = 2,2'-bipyridine) are strongly affected by the number (one or two) of substituents and by the number (one or three) of carbohydrate branches present in the substituents. These effects are assigned to shielding of the ferrocene core by the dendritic branches. Electrochemical evidence for the existence of different conformers for one of the dendrimers in aqueous solution was obtained.     

Reactivity of 2-acylaminoacrylates with ketene diethyl acetal; [2 + 2] cycloadditions vs. tandem condensations

The reactivity of 2-acylaminoacrylates with ketene diethyl acetal can be modulated by means of thermal conditions to yield cyclobutanes for the preparation of protected beta-hydroxycyclobutane-alpha-amino acids, or catalytic conditions that yield cyclohexanes by tandem condensations to obtain interesting building blocks that are alternatives to Danishefsky's diene.     

Evaluation of a synergetic effect between Rh as permanent chemical modifier and acetylacetone as complexing agent in Sc determination in sediment slurry samples by ETAAS

In the present work, scandium was determined in sediment slurry samples (from three different rivers) by electrothermal atomic absorption spectrometry (ETAAS). Slurries were prepared by weighting 100 mg of dry sediment samples (≤53 μm particle sizes) and adding 6 ml of HCl:HNO₃:HF (3:1:2, v/v). Accurate results were only possible due to the synergetic effect between Rh as permanent chemical modifier and acetylacetone (Acac) as complexing agent. The same platform was used for 400 heating cycles. The performance of the chemical modification was evaluated by using scanning electron microscopy (SEM), synchrotron radiation X-ray fluorescence (SRXRF) and some figures of merit (precision and detectability). The best analytical conditions were attained using 1500 and 2550 °C as pyrolysis and atomization temperatures. The scandium content in the liquid phase of the slurries ranged from 61 to 73%, thus indicating, in this study, that both liquid and solid phases play an important role in slurry analyses. An amount of 5.0–20.0 μg l⁻¹ Sc linear range as well as LOD and LOQ of 0.19 and 0.62 μg l⁻¹, respectively, were obtained under these conditions. The accuracy was checked by using microwave-assisted decomposition, and the results compared to those obtained with the proposed methodology (slurry analysis). By checking both sets of the results, there is no statistical difference at the 95% confidence levels.     

Reaction of sulfene and dichloroketene with open-chain N,N-disubstituted α-aminomethyleneketones. Synthesis of 4-dialkylamino-3,4-dihydro-5,6-dimethyl-1,2-oxathiin 2,2-dioxides and of 6,(5)(di)alkyl-3-chloro-4-methylphenylamino-2H-pyran-2-ones

Cycloaddition of sulfene to N,N-disubstituted 4-amino-3-methyl-3-buten-2-ones (III) occurred in fair to good yield only in the case of aliphatic N-substitution to give 4-dialkylamino-3,4-dihydro-5,6-dimethyl-1,2-oxathiin 2,2-dioxides, whereas N,N-disubstituted 1-amino-1-penten-3-ones (II) did not react at all. Cycloaddition of dichloroketene to II, III and N,N-disubstituted 4-amino-3-buten-2-ones occurred only in the case of the methylphenylamino derivative, giving in good to moderate yield 6,(5)(di)alkyl-3,3-dichloro-3,4-dihydro-4-methylphenylamino-2-Hpyran-2-ones, which were dehydrochlorinated with DBN to 6,(5)(di)alkyl-3-chloro-4-methylphenylamino-2H-pyran-2-ones.     

Coelectroosmotic capillary electrophoresis of phenolic acids and derivatized amino acids using N,N-dimethylacrylamide-ethylpyrrolidine methacrylate physically coated capillaries

Two different families of compounds, i.e., phenolic and amino acids have been separated by capillary electrophoresis using a physically adsorbed polymer as capillary coating. The polymer used was N,N-dimethylacrylamide-ethylpyrrolidine methacrylate (DMA-EpyM) and it provided an stable coating by only flushing the capillary with a DMA-EpyM aqueous solution for 2 min between runs. The usefulness of this procedure has been demonstrated through the fast analysis of different families of solutes. Two different detection systems, diode-array detector and laser-induced fluorescence, have been used to determine phenolic acids and derivatized amino acids with fluorescein isothiocyanate, respectively. The main factors affecting reversal of electroosmotic flow (EOF) such as pH, type and concentration of buffer, and concentration and influence of organic solvents, as well as all the instrumental conditions were studied and optimized for both families of compounds.     

Comparison of the acidity of residual silanol groups in several liquid chromatography columns

The silanol acidity of Waters Resolve C18, Waters Resolve silica, Waters Symmetry C18, Waters Symmetry silica, Waters XTerra MS C18 and underivatized XTerra columns has been measured from the retention of LiNO3 with a methanol/water (60:40) mobile phase buffered to different pH values. The Li+ cation is retained by cationic exchange with the background cation of the mobile phase (Na+) through the ionized silanols. The number of active silanols increases in the order: XTerra MS C18 < Symmetry C18 < underivatized XTerra < Resolve C18 < Resolve silica approximately equal to Symmetry silica. XTerra MS C18 does not present any residual silanol acidity up to s(s)pH 10.0 (pH in 60% methanol) as measured by LiNO3. The underivatized XTerra packing and Symmetry C18 present active silanols only at s(s)pH values higher than 7.0. For the other three columns, two different types of silanols with different acidity (s(s)pKa values about 3.5-4.6 and 6.2-6.8, respectively) have been observed. Symmetry C18 shows evidence of the presence of active basic sites that retain NO3- by anionic exchange.     

New organic nitrates. II. Synthesis of 2H-pyrido[2,3-e]-1,3-oxazine-2,4(3H)-diones, 2H-pyrido[4,3-e]-1,3-oxazine-2,4(3H)-diones, 2H-pyrido[4,3-e]-1,3-oxazin-4(3H)-ones, 2H-thieno[2,3-e]-1,3-oxazin-4(3H)-ones and 2H-thieno[3,4-e]-1,3-oxazin-2,4(3H)-diones

The preparation and the physico-chemical characterization of 2H-pyrido[2,3-e]-1,3-oxazine-2,4(3H)-diones, 2H-pyrido[4,3-e]-1,3-oxazine-2,4(3H)-diones, 2H-pyrido[4,3-e]-1,3-oxazin-4(3H)-ones, 2H-thieno[2,3-e]-1,3-oxazin-4(3H)-ones and 2H-thieno[3,4-e]-1,3-oxazine-2,4(3H)-diones are reported.     

Binding and condensation of plasmid DNA onto functionalized carbon nanotubes: toward the construction of nanotube-based gene delivery vectors

Carbon nanotubes (CNTs) constitute a class of nanomaterials that possess characteristics suitable for a variety of possible applications. Their compatibility with aqueous environments has been made possible by the chemical functionalization of their surface, allowing for exploration of their interactions with biological components including mammalian cells. Functionalized CNTs (f-CNTs) are being intensively explored in advanced biotechnological applications ranging from molecular biosensors to cellular growth substrates. We have been exploring the potential of f-CNTs as delivery vehicles of biologically active molecules in view of possible biomedical applications, including vaccination and gene delivery. Recently we reported the capability of ammonium-functionalized single-walled CNTs to penetrate human and murine cells and facilitate the delivery of plasmid DNA leading to expression of marker genes. To optimize f-CNTs as gene delivery vehicles, it is essential to characterize their interactions with DNA. In the present report, we study the interactions of three types of f-CNTs, ammonium-functionalized single-walled and multiwalled carbon nanotubes (SWNT-NH3+; MWNT-NH3+), and lysine-functionalized single-walled carbon nanotubes (SWNT-Lys-NH3+), with plasmid DNA. Nanotube-DNA complexes were analyzed by scanning electron microscopy, surface plasmon resonance, PicoGreen dye exclusion, and agarose gel shift assay. The results indicate that all three types of cationic carbon nanotubes are able to condense DNA to varying degrees, indicating that both nanotube surface area and charge density are critical parameters that determine the interaction and electrostatic complex formation between f-CNTs with DNA. All three different f-CNT types in this study exhibited upregulation of marker gene expression over naked DNA using a mammalian (human) cell line. Differences in the levels of gene expression were correlated with the structural and biophysical data obtained for the f-CNT:DNA complexes to suggest that large surface area leading to very efficient DNA condensation is not necessary for effective gene transfer. However, it will require further investigation to determine whether the degree of binding and tight association between DNA and nanotubes is a desirable trait to increase gene expression efficiency in vitro or in vivo. This study constitutes the first thorough investigation into the physicochemical interactions between cationic functionalized carbon nanotubes and DNA toward construction of carbon nanotube-based gene transfer vector systems.     

XRD and Si MAS-NMR spectroscopy across the β-Lu2Si2O7-β-Y2Si2O7 solid solution

Samples in the system Lu_2−xY_xSi₂O₇ (0?x?2) have been synthesized following the sol-gel method and calcined to 1300 °C, a temperature at which the β-polymorph is known to be the stable phase for the end-members Lu₂Si₂O₇ and Y₂Si₂O₇. The XRD patterns of all the compositions studied are compatible with the structure of the β-polymorph. Unit cell parameters are calculated as a function of composition from XRD patterns. They show a linear change with increasing Y content, which indicates a solid solubility of β-Y₂Si₂O₇ in β-Lu₂Si₂O₇ at 1300 °C. ²⁹Si MAS NMR spectra of the different members of the system agree with the XRD results, showing a linear decrease of the ²⁹Si chemical shift with increasing Y content. Finally, a correlation reported in the literature to predict ²⁹Si chemical shifts in silicates is applied here to obtain the theoretical variation in ²⁹Si chemical shift values in the system Lu₂Si₂O₇-Y₂Si₂O₇ and the results compare favorably with the values obtained experimentally.     

Correlation between molecular orbitals and doping dependence of the electrical conductivity in electron-doped metal-phthalocyanine compounds

We have performed a comparative study of the electronic properties of six different electron-doped metal-phthalocyanine (MPc) compounds (ZnPc, CuPc, NiPc, CoPc, FePc, and MnPc), in which the electron density is controlled by means of potassium intercalation. Despite the complexity of these systems, we find that the nature of the underlying molecular orbitals produces observable effects in the doping dependence of the electrical conductivity of the materials. For all the MPc's in which the added electrons are expected to occupy orbitals centered on the ligands (ZnPc, CuPc, and NiPc), the doping dependence of the conductivity has an essentially identical shape. This shape is different from that observed in MPc materials in which electrons are also added to orbitals centered on the metal atom (CoPc, FePc, and MnPc). The observed relation between the macroscopic electronic properties of the MPc compounds and the properties of the molecular orbitals of the constituent molecules clearly indicates the richness of the alkali-doped metal-phthalocyanines as a model class of compounds for the investigation of the electronic properties of molecular systems.