Potassium acetate by fermentation withClostridium thermoaceticum

Applied Biochemistry and Biotechnology - Potassium acetate is currently made by reacting petroleum-based acetic acid with potassium hydroxide. An alternate process, anaerobic fermentation of...     

Über 3,4-Benzoxanthen, 5. Mitt.: Direkte Substitution des 3,4-Benzoxanthons

Zusammenfassung Direkte Nitrierung und direkte Bromierung von 3,4-Benzoxanthon greift das Molekül in ein und derselben Stellung an, welche jedenfalls nicht Stellung 7 ist.4. Mitt.: Mh. Chem.91, 523 (1960).     

Large deformation in polycrystalline copper under combined tension-torsion, loading, unloading and reloading or reverse loading: A study of two incremental theories of plasticity

Experimental data from combined tension-torsion of thin walled tubes of annealed polycrystalline copper subjected to various non-proportionate loading, unloading and reverse loading paths are presented. The measurements are compared with predicted values from classical incremental theory of plasticity in terms of true stress and true strain and a recently developed incremental theory of plasticity by Bell in terms of nominal stress and nominal strain. These experimental data reveal that the plastic strain produced by the various proportionate and non-proportionate loading, unloading and reverse loading paths are in better agreement with Bell's incremental theory of plasticity as compared to classical incremental theory.     

The nonlinear optical susceptibility χ(2) near the bandgap in CdS

We have measured the second harmonic intensity generated in ultrapure CdS crystals using a tunable dye laser. The fundamental frequency corresponding to the bandgap was tuned over the various exciton energy levels. An analysis shows that at laser intensities necessary to observe second harmonic signals high excitation phenomena are unavoidable. At these intensities the excitonic contributions to the nonlinear optical susceptibility χ₍₂₎ are quenched by high excitation effects.     

Structure and Magnetic Properties of a New Lattice System of the Heterometallic Decanuclear Ce<Subscript>6</Subscript>Mn<Subscript>4</Subscript> Aggregate

In this paper, we present a mixed valence f–d Ce₆Mn ₄ ^III compound having formula [Ce ₆ ^IV Mn ₄ ^III (μ₄-O)₄ (μ₃-O)₄(O₂C^tBu)₁₂(ea)₄(OAc)₄]·H₂O (1), which is obtained by the reaction of hydrated lanthanide nitrate, pivalic acid, and ethanolamine in MeCN as a solvent. The single crystal X-ray diffraction analysis demonstrates that the central core consists of an octahedron with four triangular pyramids added to four related faces or as an octahedron encapsulated in a tetragon. The fitting of magnetization data using the anisotropic model gives D = 2.13 cm^–1 and g = 1.97 (D is the axial zero-field splitting parameter).     

Amelioration in the Detection of Chlorine Using Electric Field Assisted LIBS

The detection of chlorine and improvement in its detection has remained a challenge despite the use of a single pulse and a dual pulse laser induced breakdown spectroscopic technique (LIBS). In this article, we presented an alternate technique for improving the detection of chlorine (Cl) using LIBS in conjunction with an external electric filed. A comparison of the emission intensity enhancement and plasma parameters in the absence and presence of an external field has been also presented. The implication of the presented technique for the detection of Cl is much easier and inexpensive as compared with the dual pulse LIBS.

     

Two-level discretizations of nonlinear closure models for proper orthogonal decomposition

Proper orthogonal decomposition has been successfully used in the reduced-order modeling of complex systems. Its original promise of computationally efficient, yet accurate approximation of coherent structures in high Reynolds number turbulent flows, however, still remains to be fulfilled. To balance the low computational cost required by reduced-order modeling and the complexity of the targeted flows, appropriate closure modeling strategies need to be employed. Since modern closure models for turbulent flows are generally nonlinear, their efficient numerical discretization within a proper orthogonal decomposition framework is challenging. This paper proposes a two-level method for an efficient and accurate numerical discretization of general nonlinear closure models for proper orthogonal decomposition reduced-order models. The two-level method computes the nonlinear terms of the reduced-order model on a coarse mesh. Compared with a brute force computational approach in which the nonlinear terms are evaluated on the fine mesh at each time step, the two-level method attains the same level of accuracy while dramatically reducing the computational cost. We numerically illustrate these improvements in the two-level method by using it in three settings: the one-dimensional Burgers equation with a small diffusion parameter ν = 10^?3, the two-dimensional flow past a cylinder at Reynolds number Re = 200, and the three-dimensional flow past a cylinder at Reynolds number Re = 1000.     

Mechanical response and texture evolution of AZ31 alloy at large strains for different strain rates and temperatures

In order to study the behavior of material under finite deformation at various strain rates, the responses of AZ31 Mg sheet are measured under uniaxial (tension and compression) and multiaxial (simple shear) loadings along rolling direction (RD), 45° to rolling direction (DD), 90° to rolling direction (TD), and normal to the sheet (ND) to large strains. The material exhibits positive strain rate sensitivity (SRS) at room and elevated temperatures; the SRS is more pronounced at high temperatures and lower strain rates. The r-value of the material under tensile loading at room temperatures is higher in TD at lower strain rate. Texture measurements on several failed specimens are reported under tension and simple shear after finite plastic deformation of about 20% equivalent strain. The as-received material exhibits a strong fiber with equal fractions of grains having the c-axis slightly tilted away from the sheet normal towards both +RD and −RD. Pole figures obtained after tensile loading along the rolling direction (RD) show that the texture of the material strengthens even at low strains, with c-axis perpendicular to the sheet plane and prism planes lining up in a majority of grains. However, the tensile loading axis along TD does not lead to similar texture strengthening; the c-axis distribution appears to be virtually unchanged from the virgin state. The pole figures obtained after in-plane compression along RD brings the c-axes of the grains parallel to the loading direction. The pole figures after simple shear loading show that the c-axis rotates to lie on the sheet plane consistent with a compression axis 45° away on the sheet plane.