Morpho-structural and luminescence investigations on yttrium silicate based phosphors prepared with different precipitating agents

Yttrium silicate doped with cerium (Y₂SiO₅:Ce) was obtained from Y-Ce-Si based precursors prepared by the simultaneous addition of reagents (SimAdd) technique. The synthesis of the precursors was done in well controlled conditions using ammonium oxalate, ammonium carbonate or urea as precipitating agents. Results regarding the influence of precipitating agents on the morpho structural and photoluminescent characteristics of Y₂SiO₅:Ce are reported. The TG analysis in correlation with EGA, FT-IR and XRD investigations reveals the formation of oxalate, hydroxy-carbonate or hydroxy-nitrate based compounds, the same as the conversion of the precursors to well crystallized yttrium silicate. XRD patterns show that the precursors are amorphous except for the sample prepared with ammonium oxalate. Depending on the precipitation conditions, the phosphors phase composition varies from single phase (X2-Y₂SiO₅) to a mixture of phases (X2-Y₂SiO₅, X1-Y₂SiO₅, Y₂O₃). Under UV excitation, phosphors exhibit the specific blue emission of cerium with an intensity that varies from 175.8% (urea) to 96.0% (ammonium carbonate) and to 78.5% (ammonium oxalate). The emission intensity depends on the phase purity and order degree of the phosphors. PACS Classification codes:78.55 Hx, 81.20Fw      

Influence of Substitutional Defects in ZIF-8 Membranes on Reverse Osmosis Desalination: A Molecular Dynamics Study

In this study, molecular dynamics simulation is used to investigate the effects of water-based substitutional defects in zeolitic imidazolate frameworks (ZIF)-8 membranes on their reverse osmosis (RO) desalination performance. ZIF-8 unit cells containing up to three defect sites are used to construct the membranes. These substitutional defects can either be Zn defects or linker defects. The RO desalination performance of the membranes is assessed in terms of the water flux and ion rejection rate. The effects of defects on the interactions between the ZIF-8 membranes and NaCl are investigated and explained with respect to the radial distribution function (RDF) and ion density distribution. The results show that ion adsorption on the membranes occurs at either the nitrogen atoms or the defect sites. Complete NaCl rejection can be achieved by introducing defects to change the size of the pores. It has also been discovered that the presence of linker defects increases membrane hydrophilicity. Overall, molecular dynamics simulations have been used in this study to show that water-based substitutional defects in a ZIF-8 structure reduce the water flux and influence its hydrophilicity and ion adsorption performance, which is useful in predicting the type and number of defect sites per unit cell required for RO applications. Of the seven ZIF-8 structures tested, pristine ZIF-8 exhibits the best RO desalination performance.     

Prevalence of Antimicrobial Resistant Bacteria from Conjunctival Flora in an Eye Infection Prone Breed (Saint Bernard)

The conjunctival bacterial resident and opportunistic flora of dogs may represent a major source of dissemination of pathogens throughout the environment or to other animals and humans. Nevertheless, contamination with bacteria from external sources is common. In this context, the study of the antimicrobial resistance (AMR) pattern may represent an indicator of multidrug resistant (MDR) strains exchange. The present study was focused on a single predisposed breed—Saint Bernard. The evaluated animals were healthy, but about half had a history of ocular disease/treatment. The swabs collected from conjunctival sacs were evaluated by conventional microbiological cultivation and antimicrobial susceptibility testing (AST). The most prevalent Gram-positive was Staphylococcus spp.; regardless of the history, while Gram-negative was Pseudomonas spp.; exclusively from dogs with a history of ocular disease/treatment. Other identified genera were represented by Bacillus, Streptococcus, Trueperella, Aeromonas and Neisseria. The obtained results suggest a possible association between the presence of mixed flora and a history of ocular disease/treatment. A high AMR was generally observed (90%) in all isolates, especially for kanamycin, doxycycline, chloramphenicol and penicillin. MDR was recorded in Staphylococcus spp. and Pseudomonas spp. This result together with a well-known zoonotic potential may suggest an exchange of these strains within animal human populations and the environment.     

A Combined Experimental and Computational Study of Chrysanthemin as a Pigment for Dye-Sensitized Solar Cells

The theoretical study of chrysanthemin (cyanidin 3-glucoside) as a pigment for TiO₂-based dye-sensitized solar cells (DSSCs) was performed with the GAUSSSIAN 09 simulation. The electronic spectra of neutral and anionic chrysanthemin molecules were calculated by density functional theory with B3LYP functional and DGDZVP basis set. A better energy level alignment was found for partially deprotonated molecules of chrysanthemin, with the excited photoelectron having enough energy in order to be transferred to the conduction band of TiO₂ semiconductor in DSSCs. In addition, we used the raw aqueous extracts of roselle (Hibiscus sabdariffa) calyces as the source of chrysanthemin and the extracts with various pH values were tested in DSSCs. The extracts and photosensitized semiconductor layers were characterized by UV-Vis spectroscopy, and DSSCs based on raw extracts were characterized by current density-voltage measurements.     

Scaling Up DNA Origami Lattice Assembly

The surface-assisted hierarchical assembly of DNA origami nanostructures is a promising route to fabricate regular nanoscale lattices. In this work, the scalability of this approach is explored and the formation of a homogeneous polycrystalline DNA origami lattice at the mica-electrolyte interface over a total surface area of 18.75 cm² is demonstrated. The topological analysis of more than 50 individual AFM images recorded at random locations over the sample surface showed only minuscule and random variations in the quality and order of the assembled lattice. The analysis of more than 450 fluorescence microscopy images of a quantum dot-decorated DNA origami lattice further revealed a very homogeneous surface coverage over cm² areas with only minor boundary effects at the substrate edges. At total DNA costs of € 0.12 per cm², this large-scale nanopatterning technique holds great promise for the fabrication of functional surfaces.     

Fast Analytical Temperature Rising Elution Fractionation (ATREF) Method

Conventional analytical temperature rising elution fractionation (ATREF) is performed using slowly crystallized polymers in about 16 h. In this work, we developed a fast ATREF method in which the polymer sample is directly injected on the column at room temperature, thus reducing the analysis time to about 1 h. The method was tested using four metallocene polyethylenes with unimodal short chain branching distributions and different densities, previously analyzed by ATREF using a cooling rate of 0.1°C/min. The obtained results demonstrate that the fast ATREF method is very effective and accurate in evaluating short chain branching distribution for polyolefins having unimodal distributions.     

Comparison of the activation time effects and the internal energy distributions for the CID,PQD and HCD excitation modes

Reproducibility among different types of excitation modes is a major bottleneck in the field of tandem mass spectrometry library development in metabolomics. In this study, we specifically evaluated the influence of collision voltage and activation time parameters on tandem mass spectrometry spectra for various excitation modes [collision‐induced dissociation (CID), pulsed Q dissociation (PQD) and higher‐energy collision dissociation (HCD)] of Orbitrap‐based instruments. For this purpose, internal energy deposition was probed using an approach based on Rice–Rampserger–Kassel–Marcus modeling with three thermometer compounds of different degree of freedom (69, 228 and 420) and a thermal model. This model treats consecutively the activation and decomposition steps, and the survival precursor ion populations are characterized by truncated Maxwell–Boltzmann internal energy distributions. This study demonstrates that the activation time has a significant impact on MS/MS spectra using the CID and PQD modes. The proposed model seems suitable to describe the multiple collision regime in the PQD and HCD modes. Linear relationships between mean internal energy and collision voltage are shown for the latter modes and the three thermometer molecules. These results suggest that a calibration based on the collision voltage should provide reproducible for PQD, HCD to be compared with CID in tandem in space instruments. However, an important signal loss is observed in PQD excitation mode whatever the mass of the studied compounds, which may affect not only parent ions but also fragment ions depending on the fragmentation parameters. A calibration approach for the CID mode based on the variation of activation time parameter is more appropriate than one based on collision voltage. In fact, the activation time parameter in CID induces a modification of the collisional regime and thus helps control the orientation of the fragmentation pathways (competitive or consecutive dissociations). Copyright © 2014 John Wiley & Sons, Ltd.     

Heart Regeneration: Opportunities and Challenges for Drug Discovery with Novel Chemical and Therapeutic Methods or Agents

Following a heart attack, more than a billion cardiac muscle cells (cardiomyocytes) can be killed, leading to heart failure and sudden death. Much research in this area is now focused on the regeneration of heart tissue through differentiation of stem cells, proliferation of existing cardiomyocytes and cardiac progenitor cells, and reprogramming of fibroblasts into cardiomyocytes. Different chemical modalities (i.e. methods or agents), ranging from small molecules and RNA approaches (including both microRNA and anti‐microRNA) to modified peptides and proteins, are showing potential to meet this medical need. In this Review, we outline the recent advances in these areas and describe both the modality and progress, including novel screening strategies to identify hits, and the upcoming challenges and opportunities to develop these hits into pharmaceuticals, at which chemistry plays a key role.     

Reversible Re‐programing of Cell–Cell Interactions

The ability to engineer and re‐program the surfaces of cells would provide an enabling synthetic biological method for the design of cell‐ and tissue‐based therapies. A new cell surface‐engineering strategy is described that uses lipid‐chemically self‐assembled nanorings (lipid‐CSANs) that can be used for the stable and reversible modification of any cell surface with a molecular reporter or targeting ligand. In the presence of a non‐toxic FDA‐approved drug, the nanorings were quickly disassembled and the cell–cell interactions reversed. Similar to T‐cells genetically engineered to express chimeric antigen receptors (CARS), when activated peripheral blood mononuclear cells (PBMCs) were functionalized with the anti‐EpCAM‐lipid‐CSANs, they were shown to selectively kill antigen‐positive cancer cells. Taken together, these results demonstrate that lipid‐CSANs have the potential to be a rapid, stable, and general method for the reversible engineering of cell surfaces and cell–cell interactions.     

Kinetics of chloride substitution in [Pt(bpma)Cl]+ and [Pt(gly-met-S,N,N)Cl] complexes by thiourea, nitrites, and iodides

Substitution of chloride in [PtCl(bpma)]⁺ and [PtCl(gly-met-S,N,N)], where bpma is bis(2-pyridylmethyl)amine and gly-met-S,N,N is glycyl-l-methionine, was studied as a function of the entering nucleophile concentration and temperature. Reactions between the platinum(II) complexes and thiourea (TU), iodides (I^?), and nitrites(III) (NO ₂ ^? ) were carried out in aqueous solutions using conventional UV-VIS spectrophotometry. Suitable ionic conditions were reached by an addition of 0.1 M NaClO₄ and 0.01 M NaCl (to suppress hydrolysis). The second-order rate constants, k ₂, for the studied reactions with NO ₂ ^? varied between 0.036–0.038 M^?1 s^?1, and for the reactions with TU between 0.095–1.06 M^?1 s^?1, respectively. The reaction between TU and the [PtCl(bpma)]⁺ ion is ten times faster than that of the [PtCl(gly-met-S,N,N)] complex. An analysis of the activation parameters, ΔH ^≠ and ΔS ^≠, for the selected reactions clearly shows their associative nature.