Adsorptive stripping voltammetric analysis of 2,4,6-tri(2′pyridyl)-1,3,5-triazine at a mercury electrode

The redox behaviour of adsorbed species of 2,4,6-tri(2-pyridyl)-1,3-5-triazine (TPTZ) at the surface of a mercury electrode was examined using cycling voltammetry. Based on the adsorption and accumulation of TPTZ at the charged mercury surface cathodic adsorptive stripping voltammetry (CSV) is applied for the trace determination of TPTZ using a differential pulse (DP) technique. Experimental and operational parameters for the quantitative analysis of TPTZ are optimized and the detection limit was found to be 3×10^–9 mol/l. The effect of some interferences, e.g. organic compounds, cations and anions, are investigated.     

Study of ion beam induced mixing in Sn/Si system using electrical resistivity measurements

The ion-beam mixing of Sn thin film evaporated on silicon has been investigated by continuously measuring the electrical resistivity of the sample during irradiation by Kr ions. The resistivity results exhibit a tendency toward a saturation process and allow the determination of the critical dose corresponding to the total mixing condition. The variation of the volume fraction of intermixed atoms as a function of the ion dose has been deduced and compared with a semiempirical formula to explain the observed mixing kinetics. A linear dependence of the volume fraction of the intermixed atoms on the fluence is observed, which is a signature of recoil type mixing.     

Friedel-Crafts reactions catalyzed by samarium diiodide

Samarium diiodide is an efficient precatalyst for the Friedel-Crafts reaction involving various aromatic substrates and chelating electrophiles. Alkyl 3,3,3-trifluoropyruvates are transformed into α-hydroxyesters in good yields with total regioselectivity. In reactions involving an ethyl glyoxylate or a glyoxylic imine, α-hydroxyesters or α-aminoesters are obtained with variable amounts of products resulting from a double Friedel-Crafts reaction.     

Renewable-surface sol-gel derived carbon ceramic electrode fabricated by [Ru(bpy)(tpy)Cl]PF6 and its application as an amperometric sensor for sulfide and sulfur oxoanions

A highly sensitive and fast responding sensor for the determination of thiosulfate, sulfite, sulfide and dithionite is described. It consists of a chemically modified carbon ceramic composite electrode (CCE) containing [Ru(bpy)(tpy)Cl]PF6 complex that was constructed by the sol-gel technique. A reversible redox couple of Ru(II)/Ru(III) was observed as a solute in acetonitrile solution and as a component of carbon based conducting composite electrode. Electrochemical behavior and stability of modified CCE were investigated by cyclic voltametry, the apparent electron transfer rate constant (kappa(S)) and transfer coefficient (a) were determined by cyclic voltametry which were about 28 s(-1) and 0.43 respectively. Electrocatalytic oxidation of S(2-), SO3(2-), S2O4(2-) and S2O3(2-) were effective at the modified electrode at significantly reduced overpotentials and in the pH range 1-11. Optimum pH values for amperometric detection of thiosulfate, dithionite, sulfide and sulfite are 7, 9, 2 and 2. Under the optimized conditions the calibration curves are linear in the concentration ranges 1-500, 3-80, 2-90 and 1-100 microM for S2O3(2-), SO3(2-), S2- and S2O4(2-) determination. The detection limit (signal to noise is 3) and sensitivity are 0.5 and 12, 2.8 and 6, 1.6 and 8, and 0.65 microM and 80 nA microM(-1) for thiosulfate, sulfite, sulfide and dithionite detection. The modified carbon ceramic electrode doped with Ru-complex shows good reproducibility, a short response time (t < 2 s), remarkable long term stability (> 6 month) and especially good surface renewability by simple mechanical polishing (RSD for eight successive polishing is 2%). The advantages of this sulfur compound amperometric detector based on ruthenium doped CCE are high sensitivity, inherent stability at a broader pH range, excellent catalytic activity, less expense and simplicity of preparation in comparison with recently published papers. This sensor can be used as a chromatographic detector for analysis of sulfur derivatives.     

Solvent effect on the kinetics and mechanism of the thermal decomposition oftris-oxalactocobaltate(III) complex

Summary The kinetics of the thermal decomposition of thetris-oxalactocobaltate(III) complex has been investigated in the presence of EtOH and (CH₂OH)₂ spectrophotometrically in the 50–70 ± 0.1 ° C range. The rate of the reaction decreases upon the addition of either of the alcohols to the reaction medium, whereas the activation energy increases. The thermodynamic parameters were calculated and are discussed in terms of the solvation effects. The influence of the dielectric constants of the solvent mixtures on the rate has been studied. A free radical mechanism is proposed and discussed.     

Transition metal complexes derived from N-isonicotinamido-N′-benzoylthiocarbamide (H2IBTC)

Summary The synthesis and characterization of Cr^III, Mn^II, Fe^III, Co^II, Ni^II, Cu^II, Zn^II, Cd^II and UO _inf2 ^sup2+ complexes of N-isonicotinamido-_N-benzoylthiocarbamide (H₂IBTC) are reported. I.r. spectral data show that the ligand behaves in a bidentate, tridentate and/or tetradentate manner. Different stereochemistries are proposed for Cr^III, Mn^II, Fe^III, Co^II, Ni^II and Cu^II complexes on the basis of spectral and magnetic studies. The i.r. data indicate that the carbonyl oxygen of the benzoyl moiety is the backbone of chelation in most complexes.     

2-(5-Bromo-2-pyridylazo)-5-diethylaminophenol as a reagent for the spectrophotometric determination of La(III), Y(III), and Ce(III)

The complexes of the reagent 5-Br-PADAP with the metal ions La(III), Ce(III), and Y(III) have been studied.The composition and stability of these complexes have been determined. A sensitive spectrophotometric procedure for the determination of the metal ions La(III), Ce(III), and Y(III) has been proposed. The limitations of this procedure and the effect of other ions have been studied.     

Substituted 1,2-Thiazetidine 1,1-Dioxides. Synthesis of (<Emphasis Type="Italic">RS</Emphasis>)- and (<Emphasis Type="Italic">S</Emphasis>)-1,2-Thiazetidine-3-acetic Acid 1,1-Dioxide and its Reactions with Amino Acids and Dipeptides

Summary. (RS)-2-tert-Butyldimethylsilyl-1,2-thiazetidine-3-acetic acid 1,1-dioxide prepared from (RS)-S-benzyl--homocysteine was condensed via DCC/NHS with various L-amino acid esters or dipeptide esters yielding N-silylated -sultam peptides. A -sultam active ester was isolated as an intermediate. Desilylation with TBAF in THF yielded stable N-unsubstituted products, and deprotection of the benzyl esters was achieved by catalytic hydrogenation. (S)-S-Benzyl--homocysteine was obtained by fractional crystallization of the brucine salt of the racemate and transformed into benzyl (S)-1,2-thiazetidine-3-acetate, which was on the other hand synthesized by an enantiospecific route from -benzyl Boc-L-aspartate. Some -sultam peptides were prepared from the (S)-enantiomer, and finally some -sultam peptides containing D-Ala units were obtained.     

Cupric sulfate pentahydrate (CuSO4·5H2O): a mild and efficient catalyst for tetrahydropyranylation/depyranylation of alcohols and phenols

Various alcohols and phenols can be smoothly converted to the corresponding THP ethers using 20 mol % CuSO₄·5H₂O under mild reaction conditions at room temperature. Some of the major advantages of this procedure are nonaqueous work-up, very good yields, less expensive catalyst and compatibility with other protecting groups.     

Lignocellulosic biomass for bioethanol: Recent advances,technology trends,and barriers to industrial development

1. Download : Download high-res image (214KB)
2. Download : Download full-size image