Preparation and Evaluation of Long Chain Alkyl Methacrylate Monoliths for Capillary Chromatography

This work describes the fabrication of long chain alkyl methacrylate monolithic materials for use as stationary phases in capillary liquid chromatography. After capillary inner wall surface activation with 3-(trimethoxysilyl)propyl methacrylate, monoliths were formed by copolymerization of either lauryl or stearyl methacrylate (LMA or SMA) with ethylene dimethacrylate (EDMA) as crosslinker, in the presence of azobisisobutyronitrile (AIBN) as initiator and a mixture of porogenic solvents including water, 1-propanol and 1,4-butanediol. The composition of the polymerization mixture was changed in terms of monomer, crosslinker and porogen ratio composition, in order to compare the influence of these parameters. The monoliths were prepared in 320 ??m i.d. and 200 mm length capillaries. The column morphology was characterized by optical microscopy and scanning electron microscopy (SEM). Total porosity and permeability of each column were calculated using uracil as unretained material by measuring the pressure drop across the columns as a function of linear velocity. The microglobule average size for each column was also determined using Hagen?CPoiseuille equation and compared with the SEM images. As expected, a decrease of the porogen to monomer ratio corresponded to smaller microglobules and a lower total porosity. The columns were then chromatographically evaluated; good results were obtained when these capillaries were used to separate mixtures of phenols, aromatics and drug compounds.     

PMR Spectrometric Analysis of Tolmetin Sodium in Capsules Forms

An analytical method is described for the assay of tolmetin, 1-methyl-5-(4-methylbenzoyl)-1H-pyrrole-2-acetic acid, as sodium salt, (Tolectin[rgrave] - 200 mg) using PMR. The protocol reported in this study is simple, precise and yields accurate results of 99.78±0.84 and 100.67±2.08 for the authentic material and capsules respectively. In addition, the PMR spectrum obtained provides a means for qualitative identification of the drug and checking its purity. The principle of the method involves comparison of the integral of the well-defined singlet (positioned at 2.41 Δ) to that of the sharp singlet due -CH₃ (positioned at 1.91 Δ) of sodium acetate as an internal standard in presence of maleic acid using DMSO-d₆ solvent. The rationale for the use of maleic acid in the assay procedure has been discussed.     

New Thiophene Derivatives as Antimicrobial Agents

Phenacylbromide derivatives constitute a multilateral group of precursors for the synthesis of numerous heterocycles of organic compounds. Briefly, 5‐(2‐bromo‐acetyl)‐substituted‐thiophene derivative has been used as a synthon for synthesis of new thiophene‐containing compounds through the reaction with nucleophilic nitrogen compounds and thioamides. The suggested structures of the newly synthesized thiophene compounds were confirmed and assured with different spectroscopic tools and with CHN elemental analysis. Additionally, the antimicrobial activity of these thiophene compounds was recorded to investigate their potency against various types of bacteria and fungi. Results showed that these compounds exhibit significant inhibitory activity against the growth of tested bacterial and fungal strains and that some derivatives were more potent than the employed reference drugs.     

Multicomponent domino protocol for the stereoselective synthesis of novel pyrrolo[3,2-c]quinolinone hybrid heterocycles

A series of structurally intriguing novel pyrrolo[3,2-c]quinolinone heterocyclic hybrids have been synthesized for the first time via a one-pot multicomponent domino reaction sequence that involves a 1,3-dipolar cycloaddition and two subsequent annulation steps. Baylis-Hillman adducts derived from various substituted benzaldehyde and methyl acrylate in presence of DABCO were used as a dipolarophiles, while the 1,3-dipole components were azomethine ylides, formed in situ from isatin derivatives and l-phenylalanine. The reaction generated five new bonds, three new rings and four contiguous stereocenters, which were created with full diastereomeric control.     

Role of Daucus carota in Enhancing Antiulcer Profile of Pantoprazole in Experimental Animals

The carrot plant (Daucus carota) and its components are traditionally reported for the management of gastric ulcers. This study was performed to evaluate the role of carrot when administered concurrently with a conventional antiulcer treatment, pantoprazole, in alleviating gastric and duodenal ulcers in female experimental animals. The study involved standard animal models to determine the ulcer preventive effect using pylorus ligation, ethanol, and stress induced acute gastric ulcer models and duodenal ulcer models involving cysteamine. Acetic acid-induced chronic gastric ulcer and indomethacin-induced gastric ulcer models were used to evaluate the ulcer healing effect. Carrot fruit (500 mg/kg) and its co-administration with pantoprazole produced significant protection in an ethanol- and stress-induced acute gastric ulcer and cysteamine-induced duodenal ulcer. The healing of the acetic acid-induced chronic gastric ulcer was also augmented with this combination. Both total proteins and mucin contents were significantly increased in indomethacin-induced gastric ulcers. Similarly, in pylorus ligation, the pepsin content of gastric juice, total acidity, and free acidity were reduced. Overall, both ulcer preventive effects and ulcer healing properties of the pantoprazole were significantly enhanced in animals who received the co-administration of carrot fruit (500 mg/kg).     

Multivariate optimization of the hollow fiber-based liquid phase microextraction of lead in human blood and urine samples using graphite furnace atomic absorption spectrometry

The present study developed a liquid-phase microextraction based on hollow fiber coupled with graphite furnace atomic absorption spectrometry for the effective extraction and quantitation of lead from urine and blood samples. A multivariate design was used for the optimization of the experimental conditions to ensure high extraction efficiency. Six factors (solvent type, chelating agent, time extraction, temperature, donor phase pH, and acceptor phase pH) were obtained by screening eleven factors of the Plackett–Burman design; these were optimized using the central composite design of response surface methodology. The optimum conditions of donor phase pH, acceptor phase pH, temperature, and extraction time were 5, 9.5, 40 °C, and 120 min, respectively. In addition, oleic acid containing dicyclohexyl-18-krone-6 was used for the membrane phase. Under optimal conditions, the enrichment factor, limit of detection, and limit of quantification were obtained in the ranges of 21.3–18.7, 0.001–0.002 ng mL^?1, and 0.008–0.01 ng mL^?1, respectively, in urine and blood samples. The linearity of the calibration curve was established for the concentration of Pb in the range of 1–50 ng mL^?1 (r²?=?0.9983). Finally, the performance of the developed method was evaluated for the determination of lead in urine and blood samples, and satisfactory results were obtained (RSDs <?10% with recovery >?95).     

Plasma-based preparation of polyaniline/graphene and polypyrrole/graphene composites for dye-sensitized solar cells as counter electrodes

This study presents the preparation of graphene (GR) nanocomposites with polyaniline (PANI) and polypyrrole (PPy) through the fast, versatile and environmentally friendly process of radio frequency (RF)-plasma polymerization. Morphological characterization of the nanocomposites is performed using scanning electron microscopy (SEM) and shows that the PANI and PPy conducting polymers coated the GR surface. The surface properties of the GR nanocomposites are determined using Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD). The prepared GR nanocomposites are then used as counter electrodes in dye-sensitized solar cells (DSSCs). The conversion cell efficiencies for iodine-doped DSSC samples are found to be 0.086%, 5.41%, and 5.60% for I₂-PANI, I₂-PANI-GR and I₂-PPy-GR, respectively, while the corresponding undoped samples reaches power conversion efficiencies of 3.82%, 1.30%, and 0.077% for PPy-GR, PANI-GR and PANI, respectively. The incident photon-to-current efficiency (IPCE) of iodine-doped composite-based DSSCs is significantly enhanced.     

Regio- and diastereoselective synthesis of anticancer spirooxindoles derived from tryptophan and histidine via three-component 1,3-dipolar cycloadditions in an ionic liquid

A small library of novel hybrid spiroheterocycles containing spirooxindole, pyrrolidine and indole/imidazole moieties were synthesized with complete regio- and diastereoselectively in good to excellent yields from a three-component process starting from a series of variously substituted (E)-(2-nitrovinyl)benzenes, indoline-2,3-dione derivatives and l-tryptophan or l-histidine in an ionic liquid. The key step of this transformation is a 1,3-dipolar cycloaddition reaction involving a rare class of in situ-generated azomethine ylides derived from aromatic amino acids. The compounds thus synthesized were evaluated for their anticancer activity and were shown to inhibit the proliferation of FaDu cells, a human epithelial cell line isolated from a squamous cell carcinoma of the hypopharynx, via apoptotic cell death.     

Determination of the composition,encapsulation efficiency and loading capacity in protein drug delivery systems using circular dichroism spectroscopy

Peptides and proteins have become very promising drug candidates in recent decades due to their unique properties. However, the application of these drugs has been limited by their high enzymatic susceptibility, low membrane permeability and poor bioavailability when administered orally. Considerable efforts have been made to design and develop drug delivery systems that could transport peptides and proteins to targeted area. Although it is of great importance to determine the composition after loading a drug to the carrier, the ability to do so is significantly limited by current analytical methods. In this letter, five important proteins, α₁-antitrypsin, hemoglobin human, human serum albumin, human transferrin and r-globulin were chemically conjugated to two model drug carriers, namely carbon dots and polymer O-(2-carboxyethyl) polyethylene glycol. A simple yet convenient method based on circular dichroism spectroscopy was developed to determine the compositions of the various protein-carrier conjugates.