Couplage dans les alliages à mémoire de formeCoupling in shape memory alloys.

This Note concerns the study of the micromechanic behavior of shape memory alloys. The advantage of this model permits the coupling between the martensitic transformation and microstructural evolution observed after cycling. The model makes it possible to obtain consecutives equations, which explain at the same time, mechanical properties and the changing structures during the transformation. It provides original physical results on the global behavior of shape memory alloys. To cite this article: A. Alhamany et al., C. R. Mecanique 332 (2004).     

Micro-wilhelmy and related liquid property measurements using constant-diameter nanoneedle-tipped atomic force microscope probes

The micro-Wilhelmy method is a well-established method of determining surface tension by measuring the force of withdrawing a tens of microns to millimeters in diameter cylindrical wire or fiber from a liquid. A comparison of insertion force to retraction force can also be used to determine the contact angle with the fiber. Given the limited availability of atomic force microscope (AFM) probes that have long constant diameter tips, force-distance (F-D) curves using probes with standard tapered tips have been difficult to relate to surface tension. In this report, constant diameter metal alloy nanowires (referred to as "nanoneedles") between 7.2 and 67 microm in length and 108 and 1006 nm in diameter were grown on AFM probes. F-D and Q damping AFM measurements of wetting and drag forces made with the probes were compared against standard macroscopic models of these forces on slender cylinders to estimate surface tension, contact angle, meniscus height, evaporation rate, and viscosity. The surface tensions for several low molecular weight liquids that were measured with these probes were between -4.2% and +8.3% of standard reported values. Also, the F-D curves show well-defined stair-step events on insertion and retraction from partial wetting liquids, compared to the continuously growing attractive force of standard tapered AFM probe tips. In the AFM used, the stair-step feature in F-D curves was repeatably monitored for at least 0.5 h (depending on the volatility of the liquid), and this feature was then used to evaluate evaporation rates (as low as 0.30 nm/s) through changes in the surface height of the liquid. A nanoneedle with a step change in diameter at a known distance from its end produced two steps in the F-D curve from which the meniscus height was determined. The step features enable meniscus height to be determined from distance between the steps, as an alternative to calculating the height corresponding to the AFM measured values of surface tension and contact angle. All but one of the eight measurements agreed to within 13%. The constant diameter of the nanoneedle also is used to relate viscous damping of the vibrating cantilever to a macroscopic model of Stokes drag on a long cylinder. Expected increases in drag force with insertion depth and viscosity are observed for several glycerol-water solutions. However, an additional damping term (associated with drag of the meniscus on the sidewalls of the nanoneedle) limits the sensitivity of the measurement of drag force for low-viscosity solutions, while low values of Q limit the sensitivity for high-viscosity solutions. Overall, reasonable correspondence is found between the macroscopic models and the measurements with the nanoneedle-tipped probes. Tighter environmental control of the AFM and treatments of needles to give them more ideal surfaces are expected to improve repeatability and make more evident subtle features that currently appear to be present on the F-D and Q damping curves.     

Cordierite-based refractory ceramics from natural halloysite and peridotite: Insights on technological properties

Cordierite-based ceramics were fabricated from Moroccan natural halloysite clay by using a simple and low-cost manufacturing method. To this end, peridotite and halloysite samples, collected from Beni Bousera and Melilla sites, Morocco, were used as raw materials for ceramics manufacturing. A starting mixture was prepared (76.08 wt% of clay and 23.92 wt% of peridotite), molded and heated to the desired temperature (1250, 1300 and 1350 °C) to fabricate cordierite ceramic specimens. Both raw materials (peridotite and halloysite) and final ceramics were analyzed using routine characterization techniques including chemical analysis by XRF, mineralogical analysis by XRD, thermogravimetric analysis, and morphological characteristics using scanning electron microscopy (SEM). The prepared ceramics were investigated regarding their mineralogical composition, thermal and technological properties, chemical resistance, and microstructural characteristics. Our results indicated that peridotite sample is mainly composed of silica (40.25 wt%) and magnesia (38.05 wt%) while halloysite is consisted essentially of silica (38.00 wt%) and alumina (34.13 wt%). This was confirmed by XRD, TG-DTA and FTIR analyses. The prepared ceramic specimens at different sintering temperatures (i.e., 1250, 1300 and 1350 °C) have regular cylindrical forms, displaying good ceramic properties. This is consolidated with the main technological tests including porosity (4.56–3.11%), bulk density (2.45–2.78 g/cm³), shrinkage (6.51–10.31%), indirect tensile strength (20.35–27.60 MPa), and low linear thermal expansion coefficient (3.05–2.18 × 10^?6/°C). Cordierite specimen prepared at 1350 °C provided the best ceramic sample with the highest technological properties, good chemical resistance and thermal properties. Thus, naturally abundant halloysite and peridotite deposits are potential candidates for cordierite-based ceramic manufacture. Therefore, the achieved results have provided cost-effective ceramic bricks with physical, thermal and mechanical properties that are favorable to be used as refractory bricks.     

One pot Pd(OAc)2-catalysed 2,5-diarylation of imidazoles derivatives

The regioselective 2- or 5-arylation of imidazole derivatives with aryl halides using palladium catalysts has been described in recent years; whereas the arylation at both C2 and C5 carbons of imidazoles in high yields has not been performed. We found conditions allowing the access to these 2,5-diarylimidazoles via a one pot reaction. The choice of the base was found to be crucial to obtain these products in high yields. Using CsOAc as the base, DMA as the solvent and only 2 mol % of the phosphine-free Pd(OAc)₂ the catalyst, the target 2,5-diarylated imidazoles were obtained in moderate to good yields with a wide variety of aryl bromides. Substituents such as fluoro, trifluoromethyl, formyl, acetyl, propionyl, ester, nitro or nitrile on the aryl bromide were tolerated. Sterically congested aryl bromides or heteroaryl bromides can also be employed. Surprisingly the nature of the substituent at position 1 on the imidazole derivative exhibits a huge influence on the reaction.     

A general route to α-alkyl (E)-α,β-unsaturated aldehydes

Bis(trimethylsilyl)-tert-butylaldimines 3 react with aldehydes in the presence of zinc bromide at room temperature to give, after hydrolysis, the desired α-alkyl α,β-ethylenic aldehydes in good yield and with very high E stereoselectivity. The reaction was believed to proceed via the α-silyl β-siloxyimines 4.     

Multilayer Heisenberg models: linear spin wave analysis

The effect of the interlayer and intralayer anisotropies on the energy gap and sublattice magnetization is investigated using the linear spin wave theory for multilayer Heisenberg models with odd number of coupled layers. In the isotropic case, such systems exhibit a long-range order and no energy gap, while, in the anisotropic case, they are still ordered and the energy gap opens for certain anisotropies.     

Comb-like ionic complexes of cationic surfactants with bacterial poly(gamma-glutamic acid) of racemic composition

Comb-like ionic complexes, nATMA . PG(DL)GA, were prepared from microbial poly(gamma-glutamic acid), with a nearly racemic configuration, and alkyltrimethylammoniun bromides, with linear alkyl chains containing an even number of carbon atoms, n, ranging from 12 to 22. The complexes had a nearly stoichiometric composition, displayed thermal stability up to temperatures above 200 degrees C and were insoluble in water but soluble in organic solvents. In the solid state, they were arranged in a regularly layered structure with the alkyl side chain crystallized for n > or = 18. Heating above melting entailed a contraction in the interlayer distance which varied from 1 to 10% depending on the value of n. Comparison with data reported on similar complexes obtained from nearly enantiomerically pure poly(gamma-glutamic acid) revealed an overall behavior very similar for the two series but with specific significant differences concerning side chain crystallinity and dimensional response to temperature.     

Square‐Wave Voltammetric Determination of Paraquat at Carbon Paste Electrode Modified with Hydroxyapatite

The voltammetric behavior of paraquat was investigated at hydroxyapatite‐modified carbon paste electrode HAP‐CPE in K₂SO₄. A method was developed for the detection of the trace of this herbicide, based on their redox reaction. The reduction peaks of paraquat were observed around ?0.70 V and ?1.00 V (vs. SCE) in square‐wave voltammetry. Experimental conditions were optimized by varying the accumulation time, apatite loading and measuring solution pH. Calibration plots were linear under the optimized parameters over the herbicide's concentration range 8–200×10^?7 mol L^?1, with a detection and quantification limits about 1.5×10^?8 mol L^?1 and 6.4 10^?8 mol L^?1, respectively.     

Mössbauer spectroscopy in China

Mössbauer spectroscopy is a dynamic field with applications ranging from physics to biology. This paper gives a review of Mössbauer spectroscopy activities carried out by different groups in China. About thirty groups are distributed all over China for both fundamental and practical aspects. In-beam Mössbauer setup was established at HIRAC accelerator in Lanzhou, and the nuclear scattering facility has already been planned at Shanghai Synchrotron Radiation Light Source. In this review, some recent developments and achievements are discussed, as examples: (1) Brownian motion in anisotropic media, (2) applications to archaeology, and (3) molecule-based magnetic materials.