Light source system for high-precision flat-field correction and the calibration of an array detector

Signal distortion due to the non-uniform response of the detector degrades the measurement accuracy of most metrology instruments. In this Letter, we report a newly developed calibration source system for reference-based non-uniformity correction using a laser source, a fiber, and a diffusive module. By applying the Monte Carlo simulation, we show that the transmittance of the system highly depends on the cavity reflection of the diffusive module. We also demonstrate the use of this system to achieve a flat field at a very low non-uniformity(less than 0.2%) with proper illumination intensity, which most costly commercial integrating sphere systems traditionally cannot provide.     

基于LED的多色温多星等单星模拟器

针对星模拟器与星敏感器观星的色温不匹配对星敏感器光信号定标精度产生的影响,设计了一种基于LED的多色温多星等单星模拟器,采用该系统模拟特定色温的星光用于星敏感器光信号定标,大幅降低了色温非匹配带来的定标误差。从理论上分析了色温非匹配影响星敏感器光信号的定标精度的机理;根据设计指标确定了星模拟器的设计方案,主要解决了光源的选型、多色温多星等单星模拟器驱动和控制系统、色温星等匹配算法、多色温多星等单星模拟器软件设计四项关键技术问题;对多色温多星等单星模拟器进行了标定和性能测试:0等星4000K和3等星7000 K星光的光谱匹配误差分别为4.87%和7.83%,星等等级分别为0.03和2.93;光源稳定后,多色温多星等单星模拟器的平行光管出口Φ100 mm口径内的照度非均匀度为6.5%,均满足设计指标。     

Effects of structure and electronic properties of D-π-A organic dyes on photovoltaic performance of dye-sensitized solar cells

Herein,we examine the performance of dye-sensitized solar cells containing five D-π-A organic dyes designed by systematic modification of π-bridge size and geometric structure.Each dye has a simple push-pull structure with a triarylamino group as an electron donor,bithiophene-4,4-dimethyl-4 H-cyclopenta 1,2-b:5,4-b’]dithiophene(M11),4,4-dimethyl-4 H-cyclopenta[1,2-b:5,4-b’]dithiophenethiophene(M12),thiophene-4,4-dimethyl-4 H-cyclopenta[1,2-b:5,4-b’]dithiophene(M13),4,4-dimethyl-4 H-cyclopenta[1,2-b:5,4-b’]dithiophene-benzene(M14),and 4,4-dimethyl-4 H-cyclopenta[1,2-b:5,4-b’]dithiophene(M15)units asπ-bridges,and cyanoacrylic acid as an electron acceptor/anchor.The extension of theπ-bridge linkage favors wide-range absorption but,because of the concomitant molecular volume increase,hinders the efficient adsorption of dyes on the TiO₂ film surface.Hence,higher loadings are achieved for smaller dye molecules,resulting in(i)a shift of the TiO₂ conduction band edge to more negative values,(ii)a greater photocurrent,and(iii)suppressed charge recombination between the photoanode and the redox couple in the electrolyte.Consequently,under one-sun equivalent illumination(AM 1.5 G,100 mW/cm²),the highest photovoltage,photocurrent,and conversion efficiency(η=7.19%)are observed for M15,which has the smallest molecular volume among M series dyes.     

Photons can hide where they have been

Recently,the nested Mach–Zehnder interferometer[Phys.Rev.Lett.111,240402(2013)]was modified by adding Dove prisms in a paper[Quantum Stud.:Math.Found.2,255(2015)],and an interesting result is that,after the Dove prisms were inserted,a signal at the first mirror of the nested interferometer was obtained.But,according to the former original paper,the photons have never been present near that mirror.In this work,we interpret this result naturally by resorting to the three-path interference method.Moreover,we find that even though the photons have been somewhere,they can hide the trace of being there.     

Spatially modulated polarimetry based on a vortex retarder and Fourier analysis

We report a spatially modulated polarimetry scheme by using a zero-order vortex half-wave retarder(ZVHR)and a spatial Fourier analysis method.A ZVHR is employed to analyze the input polarized light and convert it into a vectorial optical field,and an analyzer is set after the ZVHR to form an hourglass intensity pattern due to the spatial polarization modulation.Then,the input light’s Stokes parameters can be calculated by spatial Fourier analysis of the hourglass pattern with a single shot.The working principle of the polarimeter has been analyzed by the Stokes-Mueller formalism,and some quantitative measuring experiments of different polarization states have been demonstrated.The experimental results indicate that the proposed polarimeter is accurate,robust,and simple to use.     

Highly transparent ceramics for the spectral range from 1.0 to 60.0μm based on solid solutions of the system AgBr-AgI-TlI-TlBr

The article is devoted to the technology for obtaining optical ceramics of Ag Br-Tl I and Ag Br-Tl Br_0.46I_0.54 systems and manufacturing samples with different compositions.The new heterophase crystal ceramics are transparent without absorption windows in the spectral range from 1.0 to 60.0μm.In the ceramics’transparency spectra based on the Ag Br-Tl I and Ag Br-Tl Br_0.46I_0.54 systems fusibility diagrams,with an increase in the thallium halides mass fraction,as well as the replacement of the bromine ion with iodine,the maximum transparency shifts to a long infrared region.     

松木-聚氯乙烯复合材料催化热解特性的研究

通过热重法研究了松木与聚氯乙烯复合材料的催化热解特性,结果表明聚氯乙烯脱氯阶段与松木的纤维素、半纤维素热分解阶段温度区间重合,二者共热解时存在协同效应,并且HCl的释放对纤维素的脱水反应能够产生催化作用,HCl释放也对木质素的热分解及碳化反应有着明显的催化作用,导致二者共热解制备的碳化物产率提高,约为29.61%。并且利用元素分析仪、扫描电镜和能谱仪对成碳材料进行表征分析,结果表明成碳材料表面粗糙呈现多孔结构,其碳元素含量较高达到74.67%。     

Hierarchical structure observation and nanoindentation size effect characterization for a limnetic shell

In the present research, hierarchical structure observation and mechanical property characterization for a type of biomaterial are carried out. The investigated biomaterial is Hyriopsis cumingii, a typical limnetic shell, which consists of two different structural layers, a prismatic "pillar"structure and a nacreous "brick and mortar" structure. The prismatic layer looks like a "pillar forest" with variationsection pillars sized on the order of several tens of microns.The nacreous material looks like a "brick wall" with bricks sized on the order of several microns. Both pillars and bricks are composed of nanoparticles. The mechanical properties of the hierarchical biomaterial are measured by using the nanoindentation test. Hardness and modulus are measured for both the nacre layer and the prismatic layer, respectively.The nanoindentation size effects for the hierarchical structural materials are investigated experimentally. The results show that the prismatic nanostructured material has a higher stiffness and hardness than the nacre nanostructured material.In addition, the nanoindentation size effects for the hierarchical structural materials are described theoretically, by using the trans-scale mechanics theory considering both strain gradient effect and the surface/interface effect. The modeling results are consistent with experimental ones.     

Graphene-nickel nitride hybrids supporting palladium nanoparticles for enhanced ethanol electrooxidation

Electrocatalysts for ethanol oxidation reaction(EOR)are generally limited by their poor durability because of the catalyst poisoning induced by the reaction intermediate carbon monoxide(CO).Therefore,the rapid oxidation removal of CO intermediates is crucial to the durability of EOR-based catalysts.Herein,in order to effectively avoiding the catalyst CO poisoning and improve the durability,the graphene-nickel nitride hybrids(AG-Ni₃N)were designed for supporting palladium nanoparticles(Pd/AG-Ni₃N)and then used for ethanol electrooxidation.The density functional theory(DFT)calculations demonstrated the introduction of AG-Ni₃N depresses the CO absorption and simultaneously promotes the adsorption of OH species for CO oxidation removal.The fabricated Pd/AG-Ni₃N catalyst distinctively exhibits excellent electroactivity with the mass catalytic activity of 3499.5 m A mg^-1 on EOR in alkaline media,which is around 5.24 times higher than Pd/C(commercial catalyst).Notably,the Pd/AG-Ni₃N hybrids display excellent stability and durability after chronoamperometric measurements with a total operation time of 150,000 s.