Detection of phenolic compounds in flow systems based on tyrosinase-modified reticulated vitreous carbon electrodes

The fabrication and performance of a reticulated vitreous carbon (RVC)-based tyrosinase flow-through electrode, in which the enzyme was covalently immobilized, is reported. The bioelectrode was tested as an amperometric detector for phenolic compounds. Variables affecting the construction of the enzyme flow-through electrode such as the RVC chemical pretreatment procedure, the enzyme immobilization method in the RVC matrix, the enzyme loading and the pH value of the buffer solution used, were optimized by flow-injection with amperometric detection. A good immobilization of the enzyme in the RVC matrix, in spite of the hydrodynamic conditions, was found. The same tyrosinase-RVC electrode could be used with no significant loss of the amperometric response for around 20 days, and reproducible responses could be achieved with different electrodes constructed in the same manner. Moreover, the operational stability of the bioelectrode was tested under continuous monitorization conditions. Calibration plots by flow injection with amperometric detection at -0.20 V were obtained for phenol, 2,4-dimethylphenol; 3-chlorophenol; 4-chlorophenol; 4-chloro-3-methylphenol and 2-aminophenol, with detection limits ranging from 2 mug l(-1) (4-chloro-3-methylphenol) to 2 mg l(-1).     

Evaluation of solid-phase extraction and stir-bar sorptive extraction for the determination of fungicide residues at low-microg kg(-1) levels in grapes by liquid chromatography-mass spectrometry

A liquid chromatography-mass spectrometry method has been developed for determining bitertanol, carboxin, flutriafol, pyrimethanil, tebuconazole and triadimefon. The evaluation of both atmospheric pressure interfaces (API), atmospheric pressure chemical ionization (APCI) and electrospray (ESI) using positive and negative ionization modes, clearly shows that the studied pesticides are more sensitive using APCI in positive mode. Two procedures based on solid-phase extraction (SPE) and stir-bar sorptive extraction (SBSE) have been assessed for extracting these compounds in grape. The recoveries obtained by SPE in samples spiked at the limit of quantification (LOQ) level ranged from 60 to 100% with relative standard deviation (R.S.D.s) from 7 to 17%. With the SBSE the recoveries obtained from samples spiked at LOQ level were between 15 and 100% and the R.S.D.s between 10 and 19%. The LOQs of most compounds are better by SPE (0.003-0.01 mg kg(-1)) than by SBSE (0.01 mg kg(-1) for all fungicides). Although SPE provided higher recoveries, lower R.S.D.s, best LOQs and is more rapid to carry out compared with SBSE, this last one has some advantages such as lower organic solvent consumption, and cleaner extracts. Results obtained applying both techniques to real samples are analogous.     

Isotope dilution analysis as a definitive tool for the speciation of organotin compounds

Different spike solutions available for the determination of butyltin compounds by isotope dilution analysis are described and applied for the determination of butyltin compounds in PACS-2 certified reference material. Additionally, those spike solutions were evaluated during the course of an interlaboratory exercise organised by the National Research Council of Canada and the Laboratory of the Government Chemist (UK) in order to quantify tributyltin in a pilot sediment. The aim of this project was to evaluate the capabilities of isotope dilution mass spectrometry to reduce the uncertainty in the certification of Reference Materials for the speciation of organotin compounds. All participants were supplied with a 17Sn-enriched TBT solution from the Laboratory of the Government Chemist (UK). In our case, we performed the analysis of the pilot sediment also using a 119Sn enriched spike (mixed mono-, di- and tributyltin) and a 118Sn-119Sn double spike. The use of these additional spike solutions not only allowed the determination of monobutyltin and dibutyltin in the pilot sediment but also the evaluation and correction of possible extraction-derived rearrangement reactions. An excellent agreement amongst our results and between the participants was obtained with a precision of 8.4% RSD at a level of ca. 80 ng TBT g(-1) (as Sn).     

A tandem-flow assembly for the chemiluminometric determination of hydroquinone

A direct chemiluminescent procedure for determination of hydroquinone based on the emergent flow methodology known as multicommutation or tandem-flow is presented for first time. The manifold was based on a set of three channels and three solenoid valves; and, the determination was performed at 60 °C and at flow-rate of 7.5 ml min⁻¹. The complete cycle lasted 35 s, which resulted in a sample flow trough of 103 h⁻¹. The chemical process was the hydroquinone oxidation with the system sulphuric acid-potassium permanganate; and the light emission was clearly enhanced by the presence of quinine sulphate and benzalkonium chloride reaching a detection limit of 30 μg l⁻¹. The dynamic interval was over the range 0.1-15.0 mg l⁻¹ and a large list of interferents were assayed; the chemical robustness was also tested. The method was applied to different type of samples: namely, pharmaceutical formulations, a photographic solution and irrigation and residual superficial waters.     

Rhombohedral-scalenohedral calcite transition produced by adjusting the solution electrical conductivity in the system Ca(OH)2-CO2-H2O

This work is aimed to investigate the effects of the adjustment of the electrical conductivity (kappa25) during the semicontinuous carbonation of Ca(OH)2 suspension (slaked lime) on the morphology of the precipitated calcite (CaCO3) particles. The experiments were carried out at 30, 45, and 60 degrees C. A gradual morphological change from rhombohedral to scalenohedral shapes was produced with an increase of kappa25 from 1 to 7 mS/cm at each temperature. The explanation of this morphological change is given in terms of the increase of both the supersaturation and the ratio between concentrations of charged species containing calcium and carbonate ([Ca]ch/[CO3]ch) in the aqueous phase as the kappa25 set-point increases, prior to the precipitation process. In addition to the rise of the supersaturation this change most probably takes place because the increase of the [Ca]ch/[CO3]ch ratio affects the growth rate of the rhombohedral {104} and scalenohedral {21-1} faces in a different manner: (i) favoring the equality between the surface coverage of Ca2+ and CO3(2-) on the stoichiometric {104} face, thus enhancing the formation of CaCO3(0) growth units and then its growth rate and (ii) inhibiting the growth of the {21-1} face by adsorption of the excess calcium species.     

Evaluation of protein-A chromatography media

In process-scale antibody purification, protein-A affinity chromatography is commonly used as the initial purification step. In this paper, two different protein-A media were evaluated. These adsorbents have a porous glass backbone with different pore sizes: 700 A and 1000 A. Adsorption equilibrium data of human immunoglobulins on these media were measured via a batch technique and correlated using the Langmuir isotherm model. A larger static capacity was found for the smaller pore size material, which is probably a result of the larger specific surface area and associated higher ligand concentration. The protein uptake kinetics were also obtained via a stirred tank experiment using different initial protein concentrations. A surface layer model was used to represent the protein uptake by the media and to estimate values of a concentration-independent effective diffusivity within the particle. Experimental breakthrough curves were also obtained from packed beds operated under different conditions. Calculated breakthrough profiles were found to be in good agreement with the experimental results. Experimental breakthrough data were used to determine the dependence of the dynamic capacity of the media as a function of the fluid residence time. A larger dynamic capacity was also found for the smaller pore size media. The permeability of large scale packed beds was also reported and used in conjunction with the dynamic capacity to calculate the process production rate.     

Cyclic vinyl p-tolyl sulfilimines as chiral dienophiles: theoretical study on the stereoselectivity, Lewis acid catalysis, and solvent effects in their Diels-Alder reactions

The theoretical study reported in the present work deals with chiral cyclic vinyl sulfilimines and their reactivity as dienophiles in [4 + 2] cycloaddition reactions, using B3LYP/6-31G(d)//AM1 and B3LYP/6-31G(d)//B3LYP/6-31G(d) model chemistries. Consideration of Lewis acid catalysis, illustrated by BF(3), decreases the activation energies of the cycloaddition process while the charge transfer from the diene to the sulfilimine is augmented. The [4 + 2] cycloaddition reactions of sulfilimines with both furan and cyclopentadiene occur in the gas phase with endo stereoselectivity, which is more pronounced with the latter diene. Endo-exo energy differences in the gas phase with the B3LYP/6-31+G(d)//B3LYP/6-31+G(d), B3LYP/6-31G(d)//B3LYP/6-31G(d), and B3LYP/6-31G(d)//AM1 model chemistries are almost the same. Solvent effects are responsible for the inversion of the stereoselectivity in the reactions of sulfilimines with furan because of the great difference in the dipole moments in endo and exo approaches.     

Retention process in reversed phase TLC systems with polar bonded stationary phases

The retention of a solute in RP chromatography is a very complex process which depends on many factors. Therefore, the study of the influence of a mobile phase modifier concentration on the retention in different reversed phase chromatographic systems is very important for understanding the rules governing retention and mechanisms of substance separation in a chromatographic process. Composition changes and the nature of mobile phases enable tuning of the separated analytes' retention over a wide range of retention parameters and optimization of the chromatographic process as well. Optimization of the chromatographic process can be achieved by several different methods; one of them is the so-called interpretative strategy. The key approach adopted in this strategy is the implementation of adequate retention models that couple the retention of solute with the composition of a mixed mobile phase. The use of chemically bonded stationary phases composed of partially non-bonded silica matrix and organic ligands bonded to its surface in everyday chromatography practice leads to questions of the correct definition of the retention model and the dominant retention mechanism in such chromatographic systems. The retention model for an accurate prediction of retention factor as a function of modifier concentration and the heterogeneity of the adsorbent surface should be taken into consideration. In this work the influence of mobile-phase composition on the retention of sixteen model substances such as phenols, quinolines, and anilines used as test analytes in different RP-TLC systems with CN-, NH2-, and Diol-silica polar bonded stationary phases has been studied. The aim of this study is to compare the performance of three valuable retention models assumed as the partition, adsorption/partition, and adsorption mechanism of retention. All the models were verified for different RP-TLC systems by three statistical criteria. The results of investigations presented in this work demonstrate that the best agreement between the experimental and calculated Rf values was obtained by the use of new-generation retention models, which assume heterogeneity of adsorbent surface. The results reported here show that heterogeneity of the adsorbent surface may be important in analysis of the elution process in liquid chromatography. Consideration of the goodness of fit for the experimental data to the examined retention models is in conformity with the adsorption mechanism of retention on all polar bonded stationary phases in most eluent systems for most investigated compounds.     

Development of a new flow-through bulk optode for the determination of manganese(III)

A flow-through bulk optode based on the use of 1-(2-pyridylazo)-2-naphthol (PAN) immobilized in a plasticized poly(vinyl chloride) membrane entrapped in a cellulose support, in conjuntion with the flow injection analysis technique, is proposed for the determination of manganese(II). The calibration graph obtained at 570 nm was linear in the range 0.27-27.5 mg L(-1) (5 x 10(-6)-5 x 10(-4) M) Mn(II) with a detection limit of 0.18 mg L(-1). The coefficients of variation of the sensor response for 5.5 mg L(-1) of Mn(II) were +/-0.22% for consecutive measurements (n = 10), +/-0.48% between days (n = 5) and +/-0.38% between different membranes (n = 6). The sensor was readily regenerated with the carrier acetic acid/acetate buffer of pH 4.5. The method was applied to the determination of manganese in steels, waters and lemon tree leaves.     

The effect of green laser light irradiation on whole blood platelets

BACKGROUND: Laser light irradiation is assumed to have biostimulating effect in various cell types. However, there is still a lack of information concerning response of blood platelets to laser light irradiation. METHODS: In our study we used flow cytometry to monitor the effect of a green Nd-YAG laser (532 nm, 30 mW) irradiation on platelet activation and the expression of activated GPIIbIIIa glycoprotein complex (fibrinogen receptor) of whole blood platelets stained with fluorolabelled monoclonal antibody PAC-1. Also the formation of platelet microparticles and aggregates in a population of whole blood platelets following such irradiation was evaluated. RESULTS: Effects of laser light on platelet activation and reactivity were significant over a wide range of applied energies (p<0.01). While low and medium laser light energies (18 and 54 J) increased platelet activation, the irradiation with a high-energy laser light (108 J) resulted in depressed platelet reactivity and attenuated platelet response to activators. In addition, laser light irradiation had significant influence on the formation of platelet microparticles in either resting (p<0.05) or ADP-activated (p<0.05) platelets, while no significant effect was observed in collagen-activated platelets. On the other hand, laser light irradiation significantly increased the formation of platelet aggregates both in resting (p<0.01) and agonists-activated (p<0.05) platelets. CONCLUSIONS: Our results clearly point that the laser light irradiation of blood platelets can trigger signal transduction, leading to platelet activation, as well as the gradual loss of natural platelet reactivity and platelets' ability to respond to activating agents.