铈锆比对低贵金属Pt＋Rh/Ce0.3＋xZr0.6－xY0.1O1.95＋Al2O3三效催化剂性能的影响

用共沉淀法制得一系列铈锆比不同的Ce_0.3＋xZr_0.6－xY_0.1O_1.95储氧材料, 并用于制备了一系列低贵金属Pt＋Rh/Ce_0.3＋xZr_0.6－xY_0.1O_1.95＋Al₂O₃三效催化剂. 用比表面、程序升温还原以及X射线衍射对该系列催化剂进行表征, 结果发现, 催化剂的活性与催化剂中贵金属的还原性能密切相关, 低铈储氧材料比高铈储氧材料更有利于促进贵金属还原, 因而含低铈储氧材料催化剂的活性明显优于含高铈储氧材料催化剂的活性, Pt＋Rh/Ce_0.35Zr_0.55Y_0.1O_1.95＋Al₂O₃的活性最佳, 对HC, CO和NO的起燃温度最低分别为: 235, 175, 200 ℃. 样品经1000 ℃水热老化之后, 贵金属Pt被烧结而发生迁移, 使得催化剂的活性及还原性能变差, 含低铈材料的催化剂的抗老化性能优于含高铈材料的催化剂, 其中Pt＋Rh/Ce_0.35Zr_0.55Y_0.1O_1.95＋Al₂O₃的抗老化性能最好.     

8-羟基喹啉单体及二聚体质子转移反应的理论研究

Density functional theory （DFT） of quantum chemistry method was employed to investigate proton transfer reactions of 8-hydroxyquinoline （8-HQ） monomers and dimers. By studying the potential energy curves of the isomerization, the most possible reaction pathway was found. The total energy of 8-hydroxyquinoline was lower than that of quinolin-8（1H）-one, whereas the order was reversed in dimers. The findings explained the contrary experimental phenomena. The minimum reaction barrier of intramolecular proton transfer was 47.3 kJ/mol while that in dimer was only 25.7 kJ/mol. Hence it is obvious that proton transfer reactions of 8-HQ monomer have a considerable rate but it is easier to proceed for 8-HQ dimer than monomers. It implied that the hydrogen bond played an important role in depressing the activation energy of reaction. The mechanism of the tautomerization was discussed on the basis of theoretical results.     

Synthesis and Characterization of Fluoro- and Chloro- bimetallic Alkoxides as Precursors for Luminescent Metal Oxide Materials via Sol-Gel Technique

Heterobimetallic alkoxides are broadly recognized as versatile precursors for luminescence materials, and efforts are being made to develop novel routes by applying the concept of geometrical molecular design, for their synthesis and to design a single source precursor suited to photoluminescent materials. Novel and new series of bimetallic alkoxides has been prepared by metathesis route. They exhibit a lower sensitivity towards hydrolysis and so they are easier to handle as compared to other alkoxides. All the compounds were characterized by elemental analysis, FT-IR and multinuclear NMR spectroscopies. FT-IR revealed that the molecular structure of these metal alkoxides was retained to a large extent in 4 ： 1 halogenated alcohol-benzene solution. The heteronuclear NMR spectroscopy provided useful information about chemical shifts for better understanding the likely structure based on interactions with their coordinate metals. The mass spectra show similar types of fragmentation pattern. SEM-EDS analyses showed consistency with the formulation. XRD patterns show an enhanced homogeneity at high temperature. TGA measurements show that thermal decomposition occured in steps that depended entirely on the chemical compositions and the synthesis routes. SEM observation reveals that the morphology and particle size strongly depend on synthesis routes for their precursors.     

Ni(II)-糖胺金属配合物的合成、晶体结构及催化PNPP水解的活性研究

根据文献方法合成了金属配合物[Ni(HL)]Cl₂•2H₂O (HL＝1-[(2-氨乙基)氨基]-2-氨基-1,2-二脱氧-D-葡萄糖), 并用重结晶方法得到了适于X射线衍射的Ni(II)配合物的单晶. 通过对其进行元素分析、红外、紫外光谱及X射线衍射分析, 表明其为畸变的八面体构型. 最后研究了配合物对对硝基苯吡啶甲酸酯(PNPP)催化水解活性.     

在吡啶溶剂中氯化镍催化的溴代芳烃自身偶联反应

Pyridine was used as a solvent for homocoupling of aryl bromides catalyzed by nickel chloride/triarylphosphinein the presence of zinc and recycled easily.Triphenylphosphine was the best ligand for nickel in this coupling reac-tion.     

高效甲醇水蒸气重整制氢的SBA-15改性的Cu/ZnO/Al2O3催化剂

以介孔SBA-15为结构助剂, 制备出用于甲醇水蒸气重整制氢的新型高效氧化硅掺杂的Cu/ZnO/Al₂O₃催化剂, 并与传统Cu/ZnO/Al₂O₃催化剂在相同条件下的催化性能进行了比较. 结果表明, 添加适量介孔SBA-15可显著提高催化剂的催化活性和选择性, 在大幅度提高甲醇转化率的同时有效降低了重整产气中CO的含量. 原位XRD分析证实适量介孔SBA-15的添加对传统Cu/ZnO/Al₂O₃催化剂的微结构性质可产生重要的调控作用, 从而大大改善其催化活性和制氢选择性.     

纳米γ-Fe2O3粉体的合成与磁性增强研究

采用微乳法合成出氧化铁的前驱体——纳米β-FeOOH, 分别以β-FeOOH与添加剂壬基酚聚氧乙烯醚(NP-4)以物质量的比(n)为4, 5, 100添加NP-4, 混合煅烧. 采用拉曼光谱分析了样品中炭含量及分布, 并且用透射电镜观测产物的形貌和粒径, 采用磁强计观测产物磁性的变化. 结果得出, 对n＝5或破乳所得凝胶煅烧, 所得样品皆为分散均匀的四方形颗粒状, 且为磁性明显增强的纳米氧化铁γ-Fe₂O₃. 还分别讨论了样品中炭含量以及颗粒形状对比饱和磁化强度σ_s、矫顽力、矩形比的影响.     

配合物[Pd(phen)Cl2]与腺嘌呤的键合作用研究

合成并表征了固体三元配合物[Pd(phen)Cl₂] 1. 以1和DNA的组成小分子腺嘌呤(ade)反应, 获得双核配合物单晶[Pd₂(phen)₂(ade)₂]Cl₂•4.5H₂O (2). 配合物2为正交晶系, 空间群为Pnma, 晶胞参数a＝2.1709(9) nm, b＝1.4378(6) nm, c＝1.2274(5) nm, α＝β＝γ＝90°, V＝3.8311(3) nm³, D_c＝1.729 g/cm³, Z＝4, F(000)＝2004, R₁＝0.0766, wR₂＝0.1526. phen配体以两个氮原子与钯(II)离子配位, 按生物学原子规范标号, ade以N(3), N(9)原子与钯(II)离子桥联配位, 形成双核混配型配合物.     

BaCe0.8Ho0.2O3-a陶瓷的性质与应用

Ceramic BaCe0.8Ho0.2O3-α with orthorhombic perovskite structure was prepared by conventional solid state reaction, and its conductivity and ionic transport number were measured by ac impedance spectroscopy and gas concentration cell methods in the temperature range of 600-1000 ℃ in wet hydrogen and wet air, respectively. Using the ceramics as solid electrolyte and porous platinum as electrodes, the hydrogen-air fuel cell was constructed, and the cell performance at temperature from 600-1000 ℃ was examined. The results indicate that the specimen was a pure protonic conductor with the protonic transport number of 1 at temperature from 600-900 ℃ in wet hydrogen, a mixed conductor of proton and electron with the protonic transport number of 0.99 at 1000 ℃. The electronic conduction could be neglected in this case, thus the total conductivity in wet hydrogen was approximately regarded as protonic conductivity. In wet air, the specimen was a mixed conductor of proton, oxide ion and electron hole. The protonic transport numbers were 0.01-0.09, and the oxide-ionic transport numbers were 0.27-0.32. The oxide ionic conductivity was increased with the increase of temperature, but the protonic conductivity displayed a maximum at 900 ℃, due to the combined increase in mobility and depletion of the carriers. The fuel cell could work stably. At 1000 ℃, the maximum short-circuit current density and power output density were 346 mA/cm^2 and 80 mW/cm^2, respectively.     

一个新颖的三维异核锑(III)-镨(III)配合物[Sb2-μ4-(EDTA)2Pr(H2O)5]NO3•4H2O的合成、晶体结构及热分解研究

合成了锑-镨与乙二胺四乙酸形成的新颖三维配合物[Sb₂-μ₄-(EDTA)₂Pr(H₂O)₅]NO₃•4H₂O, 用元素分析、红外光谱、热分析及X射线单晶衍射法等进行了组成和结构表征. 结果表明该配合物属正交晶系, 空间群Pnn2; 晶胞参数: a＝1.07031(2) nm, b＝2.30805(4) nm, c＝0.72343(2) nm, V＝1.78711(7) nm³, Z＝2, D_c＝2.202 g/cm³, F(000)＝1164, μ＝2.955 mm^－1, GOF＝1.000, 最终偏离因子R₁＝0.0203, wR₂＝0.0545 [I＞2σ(I)]. 在标题化合物中, 每个镨(III)离子的配位数为9, 与五个水分子中的五个氧原子和四个羧基氧原子配位, 形成三帽三角棱柱空间配位多面体. 锑(III)与EDTA离子中的四个氧原子和两个氮原子配位, 在赤道平面上有一孤对电子. 同时讨论了配合物的热分解过程.