Effect of metal catalyst on the mechanism of hydrogen spillover in three-dimensional covalent-organic frameworks

Hydrogen spillover mechanism of metal-supported covalent-organic frameworks COF-105 is investigated by means of the density functional theory, and the effects of metal catalysts M_4(Pt_4, Pd_4, and Ni_4) on the whole spillover process are systematically analyzed. These three metal catalysts exhibit several similar phenomena:(i) they prefer to deposit on the tetra(_4-dihydroxyborylphenyl) silane(TBPS) cluster with surface-contacted configuration;(ii) only the H atoms at the bridge site can migrate to 2,3,6,7,10,11-hexahydroxy triphenylene(HHTP) and TBPS surfaces, and the migration process is an endothermic reaction and not stable;(iii) the introduction of M_4 catalyst can greatly reduce the diffusion energy barrier of H atoms, which makes it easier for the H atoms to diffuse on the substrate surface. Differently, all of the H2 molecules spontaneously dissociate into H atoms onto Pt_4 and Pd_4clusters. However, the adsorbed H2 molecules on Ni_4 cluster show two types of adsorption states: one activated state with stretched H–H bond length of 0.88 ?A via the Kubas interaction and five dissociated states with separated hydrogen atoms. Among all the M_4 catalysts, the orders of the binding energy of M_4 deposited on the substrate and average chemisorption energy per H2 molecule are Pt_4Ni_4Pd_4. On the contrary, the orders of the migration and diffusion barriers of H atoms are Pt_4Ni_4Pd_4, which indicates that Pt_4 is the most promising catalyst for the hydrogen spillover with the lowest migration and diffusion energy barriers. However, the migration of H atoms from Pt_4 toward the substrate is still endothermic. Thus direct migration of H atom from metal catalyst toward the substrate is thermodynamically unfavorable.     

PS-RF双层空心微球的制备

 采用聚苯乙烯(PS)空心微球为模板,间苯二酚-甲醛(RF)为前驱体溶液,邻苯二甲酸二丁酯为分散剂,以界面聚合反应为基础初步总结出一条PS-RF双层聚合物空心微球的制备工艺,并就制备过程中RF溶液与分散剂油相的选择、预聚时间、搅拌速率、固化温度等影响因素进行了讨论。当RF溶液质量分数为25%,间苯二酚与碳酸钠的物质的量之比为100,预聚24 h,搅拌速率120～200 r/min,固化温度35 ℃时,制得了球形度和同心度达到95%以上,表面粗糙度小于10 nm的PS-RF双层空心微球。     

微型光谱仪光学结构研究

光谱仪是光谱学和光谱技术中最基本的分析仪器之一,仪器的小型化对于扩展仪器使用范围有很大的帮助。设计一种微型可见光CCD摄像光谱仪的光学结构,通过理论计算,选用合适的光纤、平面定向光栅和凹面反射镜,并将它们合理组合,采用聚焦反射和分光的方法,将待测光进行色散,直接投射到CCD接收器件的表面。最后对设计的仪器性能进行了分析。结果表明：仪器的光学结构大大简化,整体尺寸减小,且精度有一定程度的提高。     

阶跃过渡应答技术研究Mo-V/Al_2O_3催化剂上乙烷氧化脱氢制乙烯反应的暂态动力学 Ⅰ.C_2H_6,O_2,C_2H_4和CO_2在催化剂上的吸附行为

用阶跃过渡应答技术研究了乙烷氧化脱氢反应的反应物C_2H_6,O_2,产物C_2H_4和主要副产物CO_2在MoO_3-V_2O_5/Al_2O_3催化剂上的吸附行为。结果表明:C_2H_6和C_2H_4在该催化剂上不吸附;氧为慢吸附、不可逆吸附;CO_2为可逆吸附,吸附量较小。并发现在无氧的条件下,乙烷能与催化剂表面上的晶格氧反应生成乙烯。这些结果对乙烷氧化脱氢反应机理的探讨有重要意义。     

高压下NbN结构和电子性质的第一性原理计算

摘要：利用密度泛函理论平面波赝势方法研究了NbN五种结构,即NaCl结构(Fm-3m); CsCl结构 (Pm-3m); ZB结构(F4-3m); 六角δ结构(P63/mmc) and ε (P-6m2)结构。本文对NbN五种结构的机械稳定性,弹性性质和高压下的电子结构等都进行了详细的研究。在NbN的五种晶体结构中,我们发现六角结构NbN要比立方结构稳定,这与实验结果相一致。我们还计算了NbN各种结构的晶格常数、体模量,弹性模量以及弹性各向异性等,结果与已有的理论和实验相吻合。同时发现在290GPa左右,NaCl结构转化为CsCl结构。为了更加深入的研究NbN的高压性能,我们研究了NbN的电子性质,结果发现NbN的不同结构具有金属性,并且在高压下原子间的杂化增强。     

Hydrogen storage in BC3 composite single-walled nanotube:a combined density functional theory and Monte Carlo investigation

This paper applies a density functional theory(DFT) and grand canonical Monte Carlo simulations(GCMC) to investigate the physisorptions of molecular hydrogen in single-walled BC 3 nanotubes and carbon nanotubes.The DFT calculations may provide useful information about the nature of hydrogen adsorption and physisorption energies in selected adsorption sites of these two nanotubes.Furthermore,the GCMC simulations can reproduce their storage capacity by calculating the weight percentage of the adsorbed molecular hydrogen under different conditions.The present results have shown that with both computational methods,the hydrogen storage capacity of BC 3 nanotubes is superior to that of carbon nanotubes.The reasons causing different behaviour of hydrogen storage in these two nanotubes are explained by using their contour plots of electron density and charge-density difference.     

低能电子与N2分子碰撞的振动共振激发散射截面的密耦合研究

使用经孙卫国教授改进后的振动密耦合散射方法和基于量子力学从头计算得到的静电、交换与极化散射作用势,研究了低能电子与N2分子的振动激发散射截面.研究表明在振动密耦合计算中使用18个振动波函数和12个分波数目,可以得到收敛的0→5,1→5等高激发散射的积分和微分截面.     

H2在二维共价有机骨架上吸附的蒙特卡罗模拟研究

使用巨正则蒙特卡罗方法预测H2分子在六种具有不同结构和组分的二维共价有机骨架材料(2D COFs)中的物理吸附行为.研究结果表明:(1)在所研究的温度和压力范围内,ILCOF-1表现出最优异的氢存储性能,是目前2D COFs中储氢量最高的材料之一;其它5种COFs的储氢量低于其它2D COFs中储氢量较高的COF-5,-8,-10和TP-COF,而与COF-1,-6和Pc-PBBA COF相差不多.(2)与3D COFs相比,本文所研究的所有COFs的储氢量均低于目前储氢量最高的COF-105和COF-108;除ILCOF-1外,其它5种COFs材料均低于COF-102和COF-103.根据模拟计算的结果,分析了表面积、孔直径和等量吸附热等因素对COFs储氢性能的影响.对COFs储氢能力的强化提出了一些建设性意见.     

BC3复合纳米管的储氢性能研究

采用巨正则蒙特卡罗方法(GCMC)研究了BC3复合纳米管的物理吸附储氢性能,获得了该纳米管在不同温度和压强下的吸附等温线,及其在不同条件下的物理储氢吸附量,并和相应的碳纳米管进行了对比研究.结果表明,BC3纳米管在所有条件下的储氢性能均优于相应的碳纳米管,因而它是一种比碳纳米管更强的氢存储介质,并从纳米管和H2分子以及H2分子和H2分子之间的平均总相互作用能的分布情况等因素出发解释了这两种纳米管有不同储氢行为的原因.     

BC3复合纳米管的储氢性能研究

采用巨正则蒙特卡罗方法（GCMC）研究了BC3复合纳米管的物理吸附储氢性能,获得了该纳米管在不同温度和压强下的吸附等温线,及其在不同条件下的物理储氢吸附量,并和相应的碳纳米管进行了对比研究。结果表明,BC3纳米管在所有条件下的储氢性能均优于相应的碳纳米管,因而它是一种比碳纳米管更强的氢存储介质,并从纳米管和H2分子以及H2分子和H2分子之间的平均总相互作用能的分布情况等因素出发解释了这两种纳米管有不同储氢行为的原因。