Synthesis and thermal behavior of new ambazone complexes with some transitional cations

Ambazone is a pharmaceutical compound that possesses antiseptic activity and tested as well for anti-tumor properties. Metal complexes of Zn(II), Fe(III), and Cu(II) containing ambazone as ligand were synthesized using a molar ratio salt:ligand of 1:1, heating the mixture up to 50 °C for 6 h. Coordination compounds were characterized by thin-layer chromatography, FT-IR spectroscopy, elemental analysis, and thermal behavior. The non-isothermal experiments were carried out in order to investigate the thermal degradation process of these complexes and were performed in a dynamic air atmosphere at a heating rate β = 10 °C min^?1 from ambient temperature, up to 500 °C. It was revealed that decomposition process is a multistadial one.     

Dyeing of cotton with thyme and pomegranate peel

Application of natural dyes for textiles is increasing due to awareness of environment, ecology, and pollution control. The purpose of this study is to determine the color, antimicrobial, and fastness properties of cotton fabrics dyed with thyme and pomegranate peel without a mordanting process. In this way, it was planned to avoid use of metallic mordants (heavy-metal salts) and prevent heavy-metal pollution for ecological production. Additionally, a variety of the most commonly used mordants, namely potassium aluminum sulfate, copper(II) sulfate, iron(II) sulfate, and tin(II) chloride, were used for mordanting of cotton fabrics in order to compare the differently mordanted and unmordanted dyed fabrics’ color efficiencies (K/S) and CIE L ^* a ^* b ^* color values. It was found that mordant type had an effect on color efficiency and the color coordinates of fabrics dyed with both thyme and pomegranate fruit peel. Moreover, the antimicrobial properties of the fabrics only dyed directly with thyme and pomegranate peel without any mordanting process were determined to demonstrate the usability of these natural dye sources without use of any mordanting agents. The obtained antimicrobial activities were compared with undyed samples. Undyed samples showed no antimicrobial activity, whereas significant antimicrobial activity was obtained after the dyeing procedure using thyme and pomegranate peel on unmordanted fabrics. Washing, rubbing, perspiration, and lightfastness properties of dyed fabrics were also evaluated. Thyme and pomegranate fruit peel as natural dye sources revealed sufficient results even for unmordanted samples.     

Preparation and characterization of activated carbon from pine cone by microwave-induced ZnCl2 activation and its effects on the adsorption of methylene blue

In this work, activated carbon prepared from pine cone (PCAC) with ZnCl₂ as an activation agent under microwave radiation was investigated. The activation step was performed at the microwave input power of 400 W and radiation time of 5 min. The properties of activated carbon were characterized by N₂ adsorption Brunauer–Emmett–Teller (BET), scanning electron microscopy and Fourier transform infrared spectroscopy. Results showed that the BET surface area, Langmuir surface area, and total pore volume of PCAC were 939, 1,486 m²/g and 0.172 cm³/g, respectively. Adsorption capacity was demonstrated by the iodine numbers. The adsorptive property of PCAC was tested using methylene blue dye. Equilibrium data was best fitted by the Langmuir isotherm model, showing a monolayer adsorption capacity of 60.97 mg/g. The pseudo-first- and pseudo-second-order kinetic models were examined to evaluate the kinetic data, and the rate constants were calculated. Adsorption of the dyes followed pseudo-first order kinetics. Thermodynamic parameters such as free energy, enthalpy and entropy of dye adsorption were obtained.     

Improvements of Tolerance to Stress Conditions by Genetic Engineering in Saccharomyces Cerevisiae during Ethanol Production

Saccharomyces cerevisiae, industrial yeast isolate, has been of great interest in recent years for fuel ethanol production. The ethanol yield and productivity depend on many inhibitory factors during the fermentation process such as temperature, ethanol, compounds released as the result of pretreatment procedures, and osmotic stress. An ideal strain should be able to grow under different stress conditions occurred at different fermentation steps. Development of tolerant yeast strains can be achieved by reprogramming pathways supporting the ethanol metabolism by regulating the energy balance and detoxicification processes. Complex gene interactions should be solved for an in-depth comprehension of the yeast stress tolerance mechanism. Genetic engineering as a powerful biotechnological tool is required to design new strategies for increasing the ethanol fermentation performance. Upregulation of stress tolerance genes by recombinant DNA technology can be a useful approach to overcome inhibitory situations. This review presents the application of several genetic engineering strategies to increase ethanol yield under different stress conditions including inhibitor tolerance, ethanol tolerance, thermotolerance, and osmotolerance.     

Poly(HEMA-co-NBMI) Monolithic Cryogel Columns for IgG Adsorption

Supermacroporous poly(2-hydroxyethyl methacrylate-co-1,5-naphthalene bismaleimide) [poly(HEMA-co-NBMI)] monolithic cryogel column was prepared by free radical cryo-copolymerization of HEMA with NBMI as a hydrophobic functional comonomer and N,N′-methylene-bisacrylamide as cross-linker directly in a plastic syringe for adsorption of albumin. The monolithic cryogel contained a continuous polymeric matrix which has interconnected pores of 10–100 μm size. Poly(HEMA-co-NBMI) cryogel was characterized by swelling studies, FTIR and scanning electron microscopy. The equilibrium swelling degree of the poly(HEMA-co-NBMI) cryogel was 10.5 g of H₂O/g dry cryogel. Poly(HEMA-co-NBMI) cryogel was used in the adsorption/desorption of IgG from aqueous solutions. The maximum amount of IgG adsorption from aqueous solution in phosphate buffer was 98.20 mg/g polymer at pH 7.0. The nonspecific adsorption of IgG onto plain poly(HEMA) cryogel was very low (2.79 g/g polymer). It was observed that IgG could be repeatedly adsorbed and desorbed with the poly(HEMA-co-NBMI) cryogel without significant loss of adsorption capacity.     

Cobalt-modified nickel–zinc catalyst for electrooxidation of methanol in alkaline medium

Cobalt-modified nickel-zinc catalyst CuNi(Zn)Co is prepared on a copper substrate by using electrodeposition. Its catalytic efficiency for methanol oxidation is studied with cyclic voltammetry, chronoamperometry, and chronopotentiometry techniques. The surface morphology and chemical composition of catalyst are characterized by scanning electron microscopy and energy dispersive X-ray spectroscopy. The oxidation kinetic parameters activation energy (Ea), active species on the surface (Γ), and rate constant (k) are determined from cyclic voltammograms which are performed at different methanol concentrations and temperatures. The results show that Ni(Zn)Co catalyst has higher catalytic activity than Ni, Co, and NiZn coatings as a composite catalyst for a promising choice of methanol electrooxidation in the alkaline medium.     

Stereoselective synthesis of optically active cyclopenta[c]pyrans and cyclopenta[c]furans by the intramolecular Pauson–Khand reaction

An intramolecular Pauson–Khand reaction of enynes derived from homoallyl, homopropargyl, and allyl alcohols is described. 2-Heteroaryl-substituted homoallyl, homopropargyl, and allyl alcohols are easily and efficiently resolved through enzymatic resolution in high ee (91–99%) and with a known stereochemistry. Each enantiomerically enriched enyne derived from homoallyl and homopropargyl alcohols affords the conformationally most stable diastereomeric cyclopenta[c]pyran ring system as the sole product, whereas enantiomerically enriched enynes derived from allyl alcohols give a diastereomeric cis:trans mixture of the cyclopenta[c]furan ring system.     

Some relations between certain inequalities concerning analytic and univalent functions

By making use of the well-known assertions in [S.S. Miller, P.T. Mocanu, Differential Subordinations, Theory and Applications, Marcel Dekker, New York-Basel, 2000] and [M. Nunokawa, On the order of strongly starlikeness of strongly convex functions, Proc. Japan Acad. Ser. A Math. Sci. 69 (7) (1993) 234–237], several useful results of certain inequalities dealing with analytic and univalent functions are obtained and then certain consequences of them are also indicated.     

EFFECT OF U.V.-IRRADIATION ON SEDIMENTATION BEHAVIOR OF VARIOUS PROTEINS

Abstract— Moderate u.v.-doses (2537 Å) sufficient to reduce enzymatic activities of native enzymes up to about 90 per cent, in general do not produce measurable amounts of smaller dialyzable fragments.
The disappearance of the original boundary in sedimentation diagrams is mostly due to the formation of rapidly sedimenting polydispersed material. Generally the sedimentation constants of the native proteins are not significantly changed. The boundaries, however, often loose their symmetry. The quantum yields for the disappearance of the original boundaries are roughly inversely proportional to the molecular weights. The number of molecules disappearing from the main peak is smaller than the number of molecules inactivated by a given dose. The data indicate that ultracentrifugation provides no satisfactory method for separation of native molecules from the damaged and inactivated. Proteins with labile quaternary structures (e.g. thyroglobulin or hemocyanine) which tend to dissociate under very mild conditions show an enhanced dissociation after u. v.-irradiation.