X-ray fluorescence intensity distribution in circular specimens

Summary The relative X-ray fluorescence (XRF) intensities for annular source and various annular specimen are measured with a Ge-Li detection system and calculated by the Monte Carlo numerical techniques (MCNT).Kα X-ray intensities of annular specimens with different radii prepared from a pure-molybdenum foil are measured and it is seen that the measured values are in good agreement with the values calculated by MCNT. The variation of the fluorescence intensity due to the collimator radius is also studied. The differences between the MCNT and experimental results are discussed in terms of the possible sources of errors.     

Measurement ofD(\vec p,p)D elastic scattering at 10.0, 12.0, 14.1 and 16.5 MeV especially for small forward and extreme backward scattering angles

The elastic scattering was investigated especially in the Coulomb sensitive scattering regions. Angular distributions of the differential cross section and of the analyzing powerA _y, with emphasis on small scattering angles, were measured at 10.0 and 14.1 MeV. For extreme backward angles up toJ _c.m.=179° the differential cross section was measured at 12.0, 14.1 and 16.5 MeV. The data have been compared with recent Faddeev calculations based on the realistic meson-exchange Paris potential and including an approximate Coulomb correction. There are discrepancies between the data and the calculations especially for the analyzing power. This indicates that the approximate treatment of Coulomb effects and possibly also the purely nuclear part of the calculations need to be improved.     

过氧化氢氧化罗丹明6G催化荧光法测定铁

基于在高氯酸溶液中痕量铁对过氧化氢氧化罗丹明 6G具有催化作用 ,建立了催化荧光法测定痕量铁的新方法。方法的检出限为 1.4× 10 - 8g·ml- 1,线性范围为 0 .0 2 0 .6 μg·ml- 1。该方法用于人发、面粉中痕量铁的测定 ,结果满意     

A short synthesis of 4-amino-3-hydroxybutyric acid (GABOB) via allyl cyanide

4-Amino-3-hydroxybutyric acid was synthesized from allyl cyanide in four steps in an overall yield of 38%. Ultrasonically promoted epoxidation of allyl cyanide with m-chloroperoxybenzoic acid giving oxiranylacetonitrile was used as a key step.     

Competitive adsorption and desorption of a bi-solute mixture: effect of activated carbon type

This study aims to clarify the effects of carbon activation type and physical form on the extent of adsorption capacity and desorption capacity of a bi-solute mixture of phenol and 2-chlorophenol (2-CP). For this purpose, two different PACs; thermally activated Norit SA4 and chemically activated Norit CA1, and their granular countertypes with similar physical characteristics, thermally activated Norit PKDA and chemically activated Norit CAgran, were used. The thermally activated carbons were better adsorbers for phenol and 2-CP compared with chemically activated carbons, but adsorption was more reversible in the latter case. 2-CP was adsorbed preferentially by each type of activated carbon, but adsorption of phenol was strongly suppressed in the presence of 2-CP. The simplified ideal adsorbed solution (SIAS) model underestimated the 2-CP loadings and overestimated the phenol loadings. However, the improved and modified forms of the SIAS model could better predict the competitive adsorption. The type of carbon activation was decisive in the application of these models. For each activated carbon type, phenol was desorbed more readily in the bi-solute case, but desorption of 2-CP was less compared with single-solute. This was attributed to higher energies of 2-CP adsorption.     

Einsatz der flammenlosen Atom-Absorption (Graphitrohrküvette) zur Bestimmung von Kupferspuren in Stahl und anderen Metall-Legierungen nach Extraktion

The determination of small and smallest amounts of copper in steel and other metal alloys by atomic absorption spectroscopy was investigated. It has been found, that the interferences caused by accompanying elements in the determination in aqueous solution with the flame can be completely removed by extracting the copper with Pb-DDTC in chloroform and determining this extract with the heated graphite atomizer. Moreover, it was recognised, that working with the heated graphite atomizer in organic solutions shows great advantages compared with the flame, because any solvent may be used. The methods of continuous variation by Job and the molar ratio by Yoe and Jones for the determination of the complex stoichiometry were transferred to the system Cu-DDTC by working with the heated graphite atomizer.     

Investigations for Modification of Polyacrylamide-Bentonite by Phytic Acid and its Usability in Fe3+, Zn2+ and UO2 2+ Adsorption

Composite of polyacrylamide-bentonite (PAA-B) was prepared by direct polymerisation of PAA in a suspension of bentonite (B). Adsorption and thermodynamic features of phytic acid (Phy) adsorption onto B, PAA and PAA-B, and those of Fe³⁺, Zn²⁺, UO₂ ²⁺ adsorption onto PAA-B and its modification by Phy (PAA-B-Phy) have been investigated. The reusability, storagability, ion selectivity and recoverability of sorbed ions with 1 M HCl have also been considered.The chemical and physical structure of adsorbents has been characterised by means of FT-IR and XRD. All adsorption isotherms for Phy and the ions were L-type of the Giles classification except, the one which is S type for adsorption of Phy onto PAA. The maximum adsorption capacities for the ions adsorbed were in order of UO₂ ²⁺ > Fe³⁺ > Zn²⁺ for PAA-B and Zn²⁺ > Fe³⁺ > UO₂ ²⁺ for PAA-B-Phy. Langmuir equilibrium constants for the adsorption of ions onto PAA-B-Phy were significantly higher than those found for PAA-B; the magnitude of increase for UO₂ ²⁺ was about 100. The thermodynamic parameters indicated that adsorption reactions are spontaneous in terms of adsorption free enthalpy.The chemical structure of PAA-B-Phy was not changed at the end of the studies of reusability and storagability. The composite was selective for UO₂ ²⁺ of the ions of interest.The composite of PAA-B and its modification by Phy have been used for the first time in this investigation. It is proposed that the composites can be practically used in the investigations and applications of adsorption.     

An Infrared Spectroscopic Study on the Hofmann-diam-type 1,12-Diaminododecanemetal(II) Tetracyanonickelate(II)-aromatic Guest Clathrates: M(H2N(CH2)12NH2)Ni(CN)4ċG(M=Co, Ni or Cd; G = Benzene, Naphthalene, Anthracene, Phenanthrene or Biphenyl)

Three Hofmann-diaminododecane-type clathrates of the form M(1,12-diaminododecane) Ni(CN)₄G (M = Co, Ni or Cd; G = benzene, naphthalene, anthracene, phenanthrene or biphenyl) have been prepared in powder form. The 1,12-diaminododecane molecules in the host lattice permit the inclusion of bulky guest molecules. The spectral features suggest that these compounds are similar in structure to the other Hofmann-diam-type clathrates.     

Peak area determination and energy dependence of gamma- and X-ray peak tailing

Two analytical shape functions representing the shapes of - and characteristic X-ray photopeak sides obtained with a Ge(Li) detector are described. The photopeak centroid is accurately determined by using these functions. Energy dependence of photopeak tailing at the lower energy side of the photopeaks are obtained by the least-squares fitting method. The present method can be used for the analysis of partly overlapped photopeaks, one side of which is well resolved, with a sufficient accuracy.     

The frequency-domain method reveals the dimeric structure of Na,K-ATPase

Lucifer yellow and lissamine rhodamine sulfonyl hydrazine were used as the donor and the receptor, respectively, for Förster energy transfer measurements to determine the location of the subunit in the native Na,K-ATPase from pig kidney. It was found that (1) the subunits are located in one functional complex, i.e., the dimer ()₂ appears to be the functional complex of Na,K-ATPase, and (2) the subunits in the functional enzyme complex in the membrane are not located next to each other but are rather well separated. The distance between fluorophores covalently attached to the subunits was found to be 5.3 nm.