Modeling Media with Oriented Structures

Heterogeneity is typically the result of space variability of soil parameters at different scales. Soil anisotropy may be defined as the spatial persistence in some direction only, across coarse-grid elements, of heterogeneous structures with different characteristic lengths in different directions. One can account for the effect of these structures by upscaling soil properties. Analyzing flow in a strongly anisotropic structured soil at different scales evidences how transverse dispersion reduces to a subscale process, leading to mixing within the conductive structures.     

Wide-range regulation of polyaniline conduction by interphase doping of a polyaniline film

The not-sufficient-enough conductance of semioxidized protonated polyaniline (PANI) is usually attributed to the presence of ordered quasi-metallic domains surrounded by a poorly conducting amorphous phase. The paper presents experimental results testifying to the existence, in semioxidized PANI, of multilevel redox heterogeneity that crucially effects the conductance magnitude in view of specific topology at which higher-oxidized (conducting) domains are surrounded by less oxidized (poorly conducting) domains and because the PANI conduction is extremely sensitive to the oxidation degree. It is shown experimentally that the interphase doping with metals and degenerate semiconductors of a semioxidized salt of PANI and poly(2-acrylamide-2-methyl-1-propanesulfonic acid) (PAMPSA) with a 1: 2 ratio between PANI and PAMPSA raises the PANI-PAMPSA conductivity by 3–8 orders of magnitude due to the formation near the interface of thin layers whose conductance depends on the work function of the material in contact with PANI-PAMPSA and in extreme cases substantially exceeds the conductance of gold and copper at room temperature.     

MODELING A RIGHTS‐BASED APPROACH FOR MANAGING HABITAT IMPACTS OF FISHERIES

ABSTRACT. Limiting adverse consequences of fishing on essential fish habitat has emerged as a key fishery management objective. The conventional approach to providing habitat protection is to create MPAs or marine reserves that prohibit all or certain types of fishing in specific areas. However, there may be more cost‐effective and flexible ways to provide habitat protection. We propose an individual habitat quota (IHQ) system for habitat conservation that would utilize economic incentives to achieve habitat conservation goals cost‐effectively. Individual quotas of habitat impact units (HIU) would be distributed to fishers with an aggregate quota set to maintain a target habitat “stock.” HIU use would be based on a proxy for marginal habitat damage. We use a dynamic, explicitly spatial fishery and habitat simulation model to explore how such a system might work. We examine how outcomes are affected by spatial heterogeneity in the fishery and the scale of habitat regulation. We find that the IHQ system is a highly cost‐effective means of ensuring a given level of habitat protection, but that spatial heterogeneity and the scale of regulation can have significant effects on the distribution of habitat protection.     

Overloaded elution band profiles of ionizable compounds in reversed‐phase liquid chromatography: Influence of the competition between the neutral and the ionic species

The parameters that affect the shape of the band profiles of acido‐basic compounds under moderately overloaded conditions (sample size less than 500 nmol for a conventional column) in RPLC are discussed. Only analytes that have a single pK_a are considered. In the buffer mobile phase used for their elution, their dissociation may, under certain conditions, cause a significant pH perturbation during the passage of the band. Two consecutive injections (3.3 and 10 μL) of each one of three sample solutions (0.5, 5, and 50 mM) of ten compounds were injected on five C₁₈‐bonded packing materials, including the 5 μm Xterra‐C₁₈ (121 Å), 5 μm Gemini‐C₁₈ (110 Å), 5 μm Luna‐C₁₈(2) (93 Å), 3.5 μm Extend‐C₁₈ (80 Å), and 2.7 μm Halo‐C₁₈ (90 Å). The mobile phase was an aqueous solution of methanol buffered at a constant _W^WpH of 6, with a phosphate buffer. The total concentration of the phosphate groups was constant at 50 mM. The methanol concentration was adjusted to keep all the retention factors between 1 and 10. The compounds injected were phenol, caffeine, 3‐phenyl 1‐propanol, 2‐phenyl butyric acid, amphetamine, aniline, benzylamine, p‐toluidine, procainamidium chloride, and propranololium chloride. Depending on the relative values of the analyte pK_a and the buffer solution pH, these analytes elute as the neutral, the cationic, or the anionic species. The influence of structural parameters such as the charge, the size, and the hydrophobicity of the analytes on the shape of its overloaded band profile is discussed. Simple but general rules predict these shapes. An original adsorption model is proposed that accounts for the unusual peak shapes observed when the analyte is partially dissociated in the buffer solution during its elution.     

INFLUENCE OF COMPOSITIONAL HETEROGENEITY ON MORPHOLOGY AND PROPERTIES OF SEGMENTED COPOLYMERS

Polyethylene terephthalate(PET)/polycaprolactone(PCL) segmented copolymers with different hard segment contents and a blend of two of them were studied by using DSC, WAXS, TEM and IR techniques and dynamic mechanical, stress-strain and isothermal crystallization measurements. Emphasis was laid on the studies of influence of compositional heterogeneity on the morphology and properties of these segmented copolymers. It was found that the solution cast specimens of the more heterogeneous sample exhibit better segregation of segments, high crystallinity and melting temperature. They have higher thermal stability of mechanical properties at small deformations. However, they are less stable against large deformations and may become softer than the more homogeneous ones.     

Investigation of the chemical heterogeneity of polyphenylenes using the condensation of methyl aryl ketones as a model reaction

The chemical heterogeneity of polyphenylenes obtained by trimerization poiycycio-condensation of acetylaromatic compounds has been investigated by GLC-MS analysis of the products of trimerization cyclocondensation of acetophenone. The mechanism for the formation of side products of the reaction is discussed. The presence of dypnone fragments in the polyphenylene structure results in a decrease in the thermal stability of these polymers.Deceased March, 1993.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1595–1601, September, 1993.     

Role of the surface heterogeneity in adsorption of hydrogen ions on metal oxides: theory and simulations

In this article we study the effect of energetic heterogeneity of a crystalline surface on the adsorption of hydrogen ions (protons) from the liquid phase. In particular, we examine the influence of the shape of the adsorption energy distribution on the equilibrium isotherms of hydrogen ions. To that purpose, a few popular distribution functions, including rectangular, exponential, and asymmetric Gaussian are considered. Additionally, multimodal distribution functions, which may correspond to the adsorption on different crystal planes of the oxide, are also used. Lateral interactions between adsorbed charges are modeled using the potential function proposed by Borkovec et al., which accounts also for polarization of the liquid medium. The results presented here are obtained using both Monte Carlo (MC) simulations and theoretical calculations involving Mean Field Approximation (MFA). They indicate that increased energetic heterogeneity of the adsorbing surface may, in general, considerably change the behavior of the adsorption isotherms, regardless of the assumed distribution function. It is also shown that the predictions of the proposed theory are consistent with the data obtained from the MC simulations.     

Analysis of the Micropore Structure of Various Microporous Materials from Nitrogen Adsorption at 77 K

The micropore structure of four microporous materials (two zeolites, ZSM-5 and Y-82; an activated carbon and an alumina pillared clay) and their binary physical mixtures (50-50 wt%) have been examined by nitrogen adsorption at 77 K. Various micropore sizes have been considered from the stages on the micropore filling mechanism in the microporous materials. The application of the Dubinin-Astakhov (DA) equation to characterize and obtain the adsorption potential distributions of the microporous materials is presented.     

A simple isotherm equation for describing gas adsorption on heterogeneous microporous solids

A simple isotherm equation for describing gas adsorption on solids showing heterogeneity of microporous structure is proposed. It is shown that this equation gives a good representation of the experimental data of argon, nitrogen and benzene adsorption on different types of activated carbons. Its parameters may be used to characterize heterogeneity of microporous structure of the solids.

---

Eine einfache Isotherme zur Beschreibung der Gas-Adsorption an heterogenen mikroporösen Feststoffen

Zusammenfassung Es wird eine einfache Isotherme zur Beschreibung der Gasadsorption an Feststoffen mit heterogener mikroporöser Struktur vorgeschlagen. Es wird gezeigt, daß diese Gleichung die experimentellen Daten für die Adsorption von Argon, Stickstoff und Benzol an verschiedenen Typen von Aktivkohle gut beschreibt. Die Parameter der Isotherme können zur Charakterisierung der Heterogenität der mikroporösen Struktur von Festkörpern herangezogen werden.

     

Modification of solids with volatile organics III: Natural zeolites

Summary The effect of pre-adsorbed benzene and ethanol on the adsorptive properties of natural zeolite (clinoptilolite) has been studied by gas-solid chromatography. It has been shown that modification of the solid surface by volatile organics has a significant influence on the adsorptive properties. The modification is of the same order as the more difficult modification by inorganics, as illustrated here by clinoptilolite modification with Co²⁺. Energy distribution of surface adsorptive sites appears to be continuous and confirms previous finding that only a small proportion of active sites is responsible for most adsorbate retention. Part II reference [4]