[Na(18-C-6)]2[Cu(i-mnt)2]的合成与结构分析

研究了18-冠-6与Na2[Cu(i-mnt)2][i-mnt=异丁二腈烯二硫醇阴离子,S2CC(CN)2-2]的反应,得到的配合物[Na(18-C-6)]2[Cu(i-mnt)2](1)通过元素分析、红外光谱、X射线单晶衍射进行了结构分析.配合物为单斜晶系,空间群P2(1)/c.晶体学结构数据a=1.2819(11),b=1.1793(10),c=1.4928(13)nm,β=99.121(16)°,V=2.228(3)nm3,Z=2,Dcaled.=1.369g/cm3,F(000)=958,R1=0.0521,wR2=0.1003.1中的[Cu(i-mnt)2]基团通过配体i-mnt的氮原子与两个[Na(18-C-6)]基团中的钠原子成键,形成稳定的中性配合物.     

1-甲基环氧乙烷-1-丙炔醚的结构测定及其核磁图谱

以¹H-NMR谱和¹³C双自旋回波的APT脉冲序列测定文献中尚未曾发表的化合物HC≡C-CH₂-O-C^CH₃-_O-CH₂文中计算了峰强度与脉冲间隔时间的关系,讨论了各谱线的相位并区分出-CH₃、-CH₂、-CH和季碳。     

高强度高电导率聚乙炔的合成——醚类溶剂的结构对性能的影响

通过选用不同醚类结构做溶剂加热回流Ti(OBu)_4-AIEt_3催化剂,并采用非溶剂聚合方法进行乙炔聚合发现,所得HPPA膜的强度和电导率都有了较大提高。其中直链醚制得的PA膜强度(抗张强度大于100MPa)和空气稳定性比用环醚得到的PA膜高得多,但用前者时的乙炔聚合速率远低于后者。两体系得到的HPPA膜的碘掺杂电导率值相近(～10~3S/cm),拉伸后可达10~4S/cm量级。SEM、TEM及IR光谱的结果表明,不同醚制得的PA膜的纤维束直径及顺式含量有较大差别。     

含嘧啶环的双冠醚(Ⅳ)

前文已报道由啶环桥联两个苯并冠醚的双冠醚的合成与性质。由于嘧啶环的刚性较大,能把两个冠醚单元固定在有效地协同作用位置,因此以它们作中性载体的离子选择性电极具有较好的选择性。为了进一步研究这类双冠醚的性质,我们合成了四种嘧啶环桥联两个脂肪族冠醚的双冠醚,并经元素分析、IR、′HNMR鉴定。     

LAH aryl alkyl ether cleavage of BINOL derivatives

Herein we report the cleaving of aryl alkyl ethers on BINOL derivatives, using the common reducing agent LAH. The cleavage of the alkyl oxygen bond is observed when the BINOL derivative is treated with LAH, in refluxing dioxane, for 60 h. The resulting BINOL derivative can then be re-alkylated using a standard Williamson ether synthesis. The same procedure was tested on 6-hydroxy-2-naphthoic acid derivatives and cleavage was not observed, thus suggesting a chelating mechanism for the BINOL ether cleavage.     

Bi(III) halides as efficient catalysts for the O-acylative cleavage of tetrahydrofurans: an expeditious entry to tetralins

The mild (DCM/20 °C), quantitative, regioselective, O-acylative cleavage of tetrahydrofurans using organic acid halides with catalytic Bi(III) halides is reported. X-ray crystallography is used to rationalise the failure of the reaction in the case of certain crowded acid chlorides, and a useful aspect of chemoselectivity is revealed. The synthetic potential of this reaction is illustrated with a highly efficient O-acylative cleavage/intramolecular alkylation approach to tetralins.     

Ph2S2-CaH2 in N-methyl-2-pyrrolidone as an efficient protocol for chemoselective cleavage of aryl alkyl ethers

CaH₂ was been found, for the first time, as a mild reducing agent to generate thiophenolate anion from Ph₂S₂ in N-methyl-2-pyrrolidone (NMP) for deprotection of aryl alkyl ethers. Excellent chemoselctivity was observed for substrates having chloro and nitro groups without displacement of the chlorine atom and the nitro group. Selective ether cleavage took place in the presence of α,β-unsaturated carbonyl and nitro groups without reduction and conjugate addition (to the α,β-unsaturated carbonyl group).     

Kristallstruktur des „supramolekularen”︁ Komplexes [Cs2(18-Krone-6)][HgI4] mit ungewöhnlich koordinierten Cs-Ionen

Crystal Structure of the “Supramolecular” Complex [Cs₂(18-crown-6)][HgI₄] with Unusually Coordinated Cs Ions The reaction of 18-crown-6, 1,4,7,10,13,16-hexaoxacyclooctadecane, with HgI₂/CsI in methanol yields crystals of [Cs₂(C₁₂H₂₄O₆)][HgI₄]. The compound crystallizes monoclinically, space group P2₁/c, Z = 4, a = 1574.8(3), b = 1067.0(3), c = 1693.2(6) pm, and β = 98.29(3)º. The structure consists of a network made up of two different types of [Cs-(18-crown-6)-Cs]²⁺ cations, interconnected by [HgI₄]^2? anions. The cations form an “anti-sandwich” structure with relatively short Cs ? Cs distances of 382 pm in the first type of cations and a longer distance of 480 pm in the second type of cations.     

Garratt–Braverman cyclization on basic alumina: a green protocol with improved selectivity

A green protocol (compared to the existing methodology) for carrying out Garratt–Braverman cyclization has been developed. The method involves stirring a pre-absorbed bispropargyl sulfone/ether/sulfonamide over basic alumina. The reaction with sulfones was over within 10–15 min at room temperature whereas for the ether/sulfonamide the reaction took 6–8 h at 130 °C. The products, aryl naphthalene derivatives, are obtained by simple filtration through Celite, in excellent yields.     

Copper-catalyzed dehydrogenative cross-coupling reaction between unactivated ethers and simple ketones mediated by pyrrolidine

A copper-catalyzed dehydrogenative cross-coupling reaction between unactivated ethers and simple ketones mediated by pyrrolidine has been developed. Under the catalysis of CuBr₂ and in the presence of pyrrolidine, either tetrahydrofuran 2a or tetrahydropyran 2b can react smoothly with a series of methyl aryl ketones 1a–m to give desired coupling products 3aa–mb using TBHP as an oxidant. The advantages of the dehydrogenative cross-coupling reaction are adoption of unmodified ethers as substrates, good tolerance of many functional groups and use of cheap copper salt as a catalyst. A plausible radical mechanism through enamine attack is proposed.