Hydrothermal synthesis, structure and property of nano-BaTiO3-based dielectric materials

A series of Ba_1-xSr_xTi_1-yZr_yO₃ (0≤x≤0.5, 0≤y≤0.4) and BA_1?xZn_xTi_1?ySn_yO₃ (0≤x≤0.3, 0≤y≤0.3) solid solutions were synthesized by low-temperature/low-pressure hydrothermal method below 170°C, 0.8 MPa. XRD pattern and cell parameters-composition figures of these prepared powders demonstrated that they are completely miscible solid solutions based on BaTiO₃. Furthermore, TEM showed that they have a shape of uniform, substantially spherical particles with an average particle size of 70 nm in diameter. The sintered ceramics of those powders doped by Sr²⁺ and Zr⁴⁺ or Zn²⁺ and Sn⁴⁺ have dielectric constant twelve times higher than and dielectric loss 1/6 those of pure BaTiO₃ phase at room temperature.     

Hydrothermal synthesis, structure and property of nano-BaTiO_3based dielectric materials

A series of Ba1-xSrxTi1-yZryO3 (0≤x≤0.5, 0≤y≤0.4) and Ba1-xZnxTi1-ySnyO3 (0≤x≤0.3, 0≤y≤0.3) solid solutions were synthesized by low-temperature/low-pressure hydrothermal method below 170℃, 0.8 MPa. XRD pattern and cell parameters-composition figures of these prepared powders demonstrated that they are completely miscible solid solutions based on BaTiO3. Furthermore, TEM showed that they have a shape of uniform, substantially spherical particles with an average particle size of 70 nm in diameter. The sintered ceramics of those powders doped by Sr2+ and Zr4+ or Zn2+ and Sn4+ have dielectric constant twelve times higher than and dielectric loss 1/6 those of pure BaTiO3 phase at room temperature.     

Hydrothermal synthesis,structure and photocatalytic property of nano-TiO<Subscript>2</Subscript>-MnO<Subscript>2</Subscript>

TiCl₄ and MnSO₄· H₂O as raw materials are hydrolyzed stiochiometrically, following the intermediate of oxide hydrating reacts at 150°C, 0.5 MPa in high-pressure reactor, after filtering, washing and drying, nanometric TiO₂-MnO₂ (Ti_1-X Mn _X O₂) is prepared. The effects of the reaction temperature and time on nanometric TiO₂-MnO₂ are also discussed. XRD shows that the product is TiO₂-MnO₂ with amorphous phase. After being sintered at above 780 °C, it transfers into Ti_1-X Mn _X O₂ with a rutile structure. TEM shows that TiO₂-MnO₂ is the spherical particle. And the average diameter of the particles is 20 nm. The optical absorbance was determined by UV-265 spectrophotometer after dispersing the sample in the mixture of water and glycerol with the ratio of 1 : 1 equably. It is found that the nano-material possesses the advantages of both nano-TiO₂ and nano-MnO₂, and it has strong absorption in the UV and visible region. Photodegradation of dyes in an aqueous solution is investigated using nanometricTiO₂-MnO₂ as a photocatalyst. The results show that after 60 min illumination, the decolorization rate of the acidic red B and acidic black 234 dye can be as high as 100%.     

Hydrothermal synthesis, structure and property of nano-BaTiO3-based dielectric materials

A series of Ba_1-xSr_xTi_1-yZr_yO₃ (0≤x≤0.5, 0≤y≤0.4) and BA_1?xZn_xTi_1?ySn_yO₃ (0≤x≤0.3, 0≤y≤0.3) solid solutions were synthesized by low-temperature/low-pressure hydrothermal method below 170°C, 0.8 MPa. XRD pattern and cell parameters-composition figures of these prepared powders demonstrated that they are completely miscible solid solutions based on BaTiO₃. Furthermore, TEM showed that they have a shape of uniform, substantially spherical particles with an average particle size of 70 nm in diameter. The sintered ceramics of those powders doped by Sr²⁺ and Zr⁴⁺ or Zn²⁺ and Sn⁴⁺ have dielectric constant twelve times higher than and dielectric loss 1/6 those of pure BaTiO₃ phase at room temperature.     

Hydrothermal synthesis and photocatalytic property of porous CuO hollow microspheres via PS latex as templates

Porous copper oxide (CuO) hollow microspheres have been fabricated through a simple hydrothermal method using PS latex as templates. The as-obtained samples were characterized by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffractometry (XRD) and Fourier transform infrared spectroscopy (FTIR). The influences of the mole ratio of Ethylenediamine (C₂H₈N₂) and copper acetate (Cu(Ac)₂·H₂O), hydrothermal temperature and time on the size and morphologies of the final products have been investigated. The possible formation mechanism of porous CuO hollow microspheres has been proposed and the specific surface area of the hollow microspheres with 81.71 m²/g is measured by BET method. The band gap value calculated from a UV–vis absorption spectrum of porous CuO hollow microspheres is 2.71 eV. The as-synthesized product exhibits high photocatalytic activity during the photodegradation of an organic dyestuff, rhodamine B (RhB), under UV-light illumination.     

Hydrothermal synthesis,crystal structure and third-order non-linear optical property of a copper chloride cluster

A novel one-dimensional chain coordination polymer [[CuCl₂]₂(phen)₂]_∞ (1) and a three-dimensional coordination polymer [[CuCl] (phen)₂](CuCl₂) (2) were synthesized from simple hydrothermal reactions and the structures were characterized with elemental analysis, FT-IR spectrum and X-ray diffraction. Compound 1 crystallized in the monoclinic space group Cc with a?=?9.874(2), b?=?17.871(4), and c?=?13.440(3)?Å, α?=?90.00°, β?=?106.59(3)°, γ?=?90.00°, R ₁?=?0.0463, wR ₂?=?0.0819. Compound 2 crystallized in the monoclinic space group P2/c with a?=?14.4084(13), b?=?12.6280(11) and c?=?13.3560(12)?Å, α?=?90.00°, β?=?111.490(2)°, γ?=?90.00°, R ₁?=?0.0771, wR ₂?=?0.1439. In the packing structure, π–π stacking interactions are the most significant factors controlling the novel supramolecular sheets for the title compound. Moreover, the third-order non-linear optical property of the two compounds were also investigated and they show reverse saturable absorption and self-focusing performance.     

低温-低压水热合成Ba1-xSrxTi1-ySnyO3纳米材料及其结构与性能研究

采用低温-低压水热法,在150℃,0.5MPa以下合成了一系列Ba1-xSrxTi1-ySnyO3固溶体纳米粉末(0≤x≤0.5≤y≤0.4),经XRD物相分析和d-间距-组成图证明,产品为立方晶系的完全互溶取代固溶体,结果符合Vegard定律,TEM形貌观察,粒子为均匀球形,平均粒径80nm。通过制陶实验,分别测定了该系列固溶体的室温介电常数、介电损失以及介电常数随温度的变化。结果发现,用该方法在BaTiO3中掺入适量锶和锡,由于掺杂离子均匀进入母体晶格,引起Tc降低,介电性能改善显著,当x=0.1,y=0.08时,室温介电常数达17000,比BaTiO3纯相提高10倍,而介电损失却降低88%。     

Hydrothermal synthesis, crystal structure and magnetic property of oxalate-bridged iron 1D chain coordination polymer

A novel oxalate-bridged iron coordination polymer, Fe₂(phen)₂(C₂O₄)₂ (1) has been hydrothermally synthesized and characterized by elemental analyses, IR spectrum, TGA-DTA analysis, and single-crystal X-ray diffraction. Compound (1) crystallizes in the monoclinic system, space group P2(1), the final R is 0.0486. The tetradentate-chelating coordination mode of oxalate anion creates an infinite 1D iron (II) oxalate chain structure and from which a 2D network is constructed by π–π interactions of phen rings. The temperature-dependent magnetic susceptibility measurement indicates the existence of a weak antiferromagnetic coupling between Fe^II ions.     

五氧化二钽纳米柱的水热合成和光催化性能

以聚乙烯醇(PEG)为结构导向剂,利用水热法合成了形貌可控的Ta2O5纳米柱.采用X射线衍射、扫描电镜、透射电镜、漫反射紫外-可见光谱和光致发光光谱对所制备样品进行了表征.考察了结晶时间和Ta2O5/Sr(OH)2摩尔比等合成参数对样品形貌的影响,并在此基础上对Ta2O5纳米粒可能的生长机理进行了推测.结果表明,在PEG和Sr(OH)2存在条件下可以合成形貌可控的Ta2O5纳米柱.研究了紫外光下Ta2O5纳米柱降解罗丹明B的光催化性能,发现Ta2O5的形貌对光催化性能有很大影响, Ta2O5纳米柱的光催化性能与其长度和直径比成线性关系.催化降解反应的表观速率常数最高可达0.156 min–1,且经多次循环使用后,样品仍然保持较高的催化性能.     

氧化锌纳米棒的水热合成及其光催化性能

以分析纯ZnO作为锌源、NaOH为矿化剂、盐酸为反应溶液pH调节剂,利用水热反应制备了花状ZnO纳米棒;采用扫描电子显微镜和X射线衍射仪分析了产物的形貌和结构,考察了水热温度以及Zn2+和OH-浓度比对产物形貌的影响;以甲基橙为目标降解物,采用紫外-可见分光光度计研究了ZnO纳米棒的光催化性能.结果表明,在水热反应温度80℃、Zn2+/OH-浓度比1∶7.5条件下所得ZnO纳米棒呈花状聚合,直径约为200nm,长度约为2μm,具有六方纤锌矿结构.当甲基橙初始浓度为30 mg.L-1、ZnO纳米棒的投放量为1.5g.L-1时,以300W紫外灯照射150min,甲基橙的降解率可达90%.     

Hydrothermal synthesis, characterization, and photocatalytic performance of silica-modified titanium dioxide nanoparticles

Silica-modified titanium dioxides were prepared by a hydrothermal method and then characterized by XRD, FT-IR, XPS, TEM, and UV-visible spectroscopy. The silica-modified titanium dioxides were in anatase phase and had large surface areas. There was strong interaction between SiO2 and TiO2, and TiOSi bonds formed during the hydrothermal process. The addition of silica in TiO2 particles could effectively suppress the formation of the rutile phase and the growth of titanium dioxide crystals. DRS spectra proved an increase in the band-gap transition with the increase of silica. The silica-modified TiO2 nanoparticles exhibited better photocatalytic activity, which increased with the silica amount, in comparison with pure TiO2 nanoparticles. Due to better thermal stability, the photocatalytic activity of the silica-modified TiO2 sample held good photocatalytic activity even after calcined at 1273 K.     

纳米级掺锑SnO2导电粉体的水热合成及性能研究

高纯二氧化锡是一禁带宽度达3·8eV的绝缘体,当产生氧空位或掺杂氟、铟、锑等元素后形成N型半导体,具有导电性能。常用于这些领域的N型半导体有掺铟氧化锡(ITO)、掺锑氧化锡(ATO)、掺铝或掺镓氧化锌(AZO、GZO)。由于ATO的机械性能和热稳定性比ITO高,作为抗静电材料广泛应用于涂     

Hydrothermal synthesis,characterization and photoluminescence property of a novel indium phosphate with 3D supramolecular structure

A one-dimensional chained indium phosphate In(H₂PO₄)(HPO₄)(C₁₀N₂H₈) (1) was synthesized under hydrothermal condition using 2,2′-bipyridine as a ligand and characterized by IR spectroscopy, ICP and elemental analyses, powder and single crystal X-ray diffraction analyses. Compound 1 crystallizes in the triclinic system, space group P-1. The connection of In-centered octahedra (InO₄N₂) and P-centered tetrahedra ({PO₃(OH)} and {PO₂(OH)₂}) constructs a new type of 1D chained structure with In/P ratio of 1/3. Interestingly, H₂PO₄ tetrahedron and 2,2′-bipyridine ligands "hanging" in the chain by bridging oxygen atoms and nitrogen atoms bond to the central In atoms. It is noted that the adjacent chains are stably packed together and the final structure exhibits interesting three-dimensional (3D) supramolecular array via π–π interactions of the 2,2′-bipyridine groups and hydrogen-bond interactions. Additionally, compound 1 shows strong photoluminescence property in the solid state at room temperature.     

Hydrothermal synthesis, characterization, and photocatalytic properties of Zn2SnO4

Nanosized Zn₂SnO₄ (ZTO) particles were successfully synthesized by a simple hydrothermal process in water/ethylene glycol mixed solution using amines (ethylamine, n-butylamine, n-hexylamine, and n-octylamine) as mineralizer. The products were characterized by X-ray diffractions (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and N₂ adsorption. The results indicated that the hydrothermal conditions, such as alkaline concentration (n-butylamine), reaction temperature, solvent composition, and the kind of amines, had an important influence on the composition, crystallinity, and morphology of the product. The as-synthesized ZTO samples exhibited high activities and durabilities for photodegradation of methyl orange and the activities were mainly affected by the crystallinities of the samples. A hexagonal-shaped ZTO (H-ZTO) sample was prepared in 0.53 M of n-butylamine solution at 180 °C for 20 h and its optical properties were characterized by UV-Vis diffuse reflectance and Photoluminescence (PL) spectra. Furthermore, the photocatalytic H₂ evolution reaction from ethanol aqueous solution over H-ZTO was also investigated.     

Hydrothermal synthesis and photocatalytic activity of highly dispersed ZnO powders

The micromorphology of highly dispersed ZnO powders formed from Zn(OH)₂ gels under hydrothermal conditions is studied by powder X-ray diffraction, X-ray diffraction analysis, and low-temperature nitrogen adsorption. The parameters of hydrothermal synthesis (heating rate, treatment duration, and temperature) are found to effect the microstructural characteristics of the products. The photocatalytic activity of the synthesized zinc oxide samples in the model reaction of Methyl Orange photodegradation is studied. The synthesis parameters for preparing ZnO powders with high photocatalytic activity are determined.     

水热法制备磷酸镍及其光催化性能评价

采用水热合成法以Ni(NO3)2·6H2O为镍源、KH2PO4为磷源合成了磷酸镍,并详细研究了用水热法合成磷酸镍过程中Ni/P摩尔比、晶化温度及溶液酸碱度对磷酸镍光催化降解染料亚甲基蓝的影响,优化了合成条件。通过X-射线粉末衍射(XRD)、扫描电子显微镜(SEM)、红外吸收光谱(FT-IR)、紫外-可见漫反射光谱(UV-Vis DRS)和热重-差热(TG-DTA)和N2吸附等技术对其晶相组成、表面形貌、官能团结构、光吸收特性、热稳定性和比表面积进行了表征。合成材料通过对亚甲基蓝的光催化降解性能进行评价,当制备条件Ni/P摩尔比为3:2、反应温度为110℃、p H为碱性时晶化36 h合成的材料其光催化性能最佳。     

CeO2/NaNbO3复合物的水热合成及其光催化性能的提高

钙钛矿型NaNbO3由于其非线性光学、铁电、离子导电性、高声速、光催化性能和光折变等优良性能而备受关注. 在光催化反应中, 宽禁带宽度(≈ 3.24 eV)使NaNbO3具有较高的导带底(CBM)和较低的价带顶(VBM). 因此, 它表现出强烈的光氧化和光还原能力. 众所周知, 钙钛矿型光催化剂光电子激发和传输能力的增强归因于其较高的对称性. 因此, 具有高对称性的立方NaNbO3有利于电子激发和转移. 但是, 一些固有的缺点, 包括电荷分离效率低、量子产率差和光催化活性差等, 限制了其在光催化领域的实际应用. 为了解决这些问题, 一种有效的方法是与其他半导体结合, 形成具有改善光催化活性的异质结复合物. CeO2作为传统的催化剂在光催化领域得到了广泛研究. CeO2具有稳定、无毒的特点, 是一种n型半导体. 目前, 研究人员已经发现CeO2与不同半导体的耦合可以提高CeO2的光催化活性. 这归因于能级水平的适当匹配.本文通过简易水热法制备了高活性的CeO2/NaNbO3异质结复合物, 并采用X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM, HRTEM)和紫外-可见漫反射光谱(DRS)等表征技术研究了所制光催化剂的物相结构、样品形貌和光学性能. 所制样品的光催化活性通过光催化降解无色抗菌环丙沙星(CIP)和染料罗丹明B(RhB)证实. 结果表明,在紫外和可见光照射, CeO2/NaNbO3复合物比纯NaNbO3具有更高的光催化活性. 此外, CeO2/NaNbO3复合物中CeO2的最佳质量比为2.0 wt%. 紫外光照射下光催化性能的显著提高是由于CeO2/NaNbO3异质结的形成不仅提高了光生电荷在界面范围内的迁移速率, 而且降低了光激发产生的电子和空穴的复合率. 可见光照射下内置电场的存在促进了电子和空穴的分离, 提高了光催化性能. 此外, 利用光致发光(PL)光谱、光电流、电化学阻抗谱和捕获实验证明了样品的光催化反应机理.捕获实验结果表明, ·OH自由基、·O2-自由基和空穴都参与了RhB的光催化降解过程. 最后, 探讨了提高光催化活性的可能机理.     

Hydrothermal synthesis,structure,fluorescence property of a novel 3D metal-organic framework with high thermal stability

A novel 3D metal-organic framework(MOF) with remarkable thermal stability,Ni(BIC)2.2·5H2O(JUC-86)(HBIC = 1-H-benzimidazole-5-carboxylic acid and JUC = Jilin University China),has been synthesized under hydrothermal conditions.It crystallizes in tetragonal symmetry with P43212 space group.The 3D structure consists of channels assembled from triple helices with a 4.5 × 4.52 aperture,which are formed by the parallel alignment of three infinite helical chains.The thermogravimetric analysis(TGA) and powder X-ra...     

CTAB-assisted synthesis and photocatalytic property of CuO hollow microspheres

CuO hollow microspheres have been fabricated through a simple hydrothermal method in the presence of cetyltrimethylammonium bromide (CTAB). The products were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. The effects of reaction temperature, surfactant, and the molar ratio of Urea/Cu(Π) on the morphologies of the resulting products were investigated. The possible formation mechanism of CuO hollow dandelion-like architectures was proposed. The hierarchical CuO hollow microspheres exhibited a high photocatalytic activity for decolorization of Rhodamine B (RhB) under UV-light illumination.     

Synthesis, structure, negative thermal expansion, and photocatalytic property of Mo doped ZrV2O7

A new series of compounds identified in the phase diagram of ZrO(2)-V(2)O(5)-MoO(3) have been synthesized via the solution combustion method. Single crystals of one of the compounds in the series, ZrV(1.50)Mo(0.50)O(7.25), were grown by the melt-cool technique from the starting materials with double the MoO(3) quantity. The room temperature average crystal structure of the grown crystals was solved using the single crystal X-ray diffraction technique. The crystals belong to the cubic crystal system, space group Pa3 (No. 205) with a = 8.8969 (4) ?, V = 704.24 (6) ?(3), and Z = 4. The final R(1) value of 0.0213 was achieved for 288 independent reflections during the structure refinement. The Zr(4+) occupies the special position (4a) whereas V(5+) and Mo(6+) occupy two unique (8c) Wyckoff positions. Two fully occupied O atoms, (24d) and (4b), one partially occupied O atom (8c) have been identified for this molybdovanadate, which is a unique feature for these crystals. The structure is related to both ZrV(2)O(7) and cubic ZrMo(2)O(8). The temperature dependent single crystal studies show negative thermal expansion above 370 K. The compounds have been characterized by powder X-ray diffraction, solid-state UV-vis diffuse reflectance spectra, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The photocatalytic activity of these compounds has been investigated for the degradation of various dyes, and these compounds show specificity toward the degradation of non-azoic dyes.