Structure and properties of a photosensitive polyimide: Effect of photosensitive group

The photosensitive poly(p-phenylene biphenylteracarboximide) (BPDA-PDA) precursor was synthesized by attaching photocross-linkable 2-(dimethylamino)ethyl methacrylate (DMAEM) monomer to its poly(amic acid) through acid/base complexation. The polyimide thin films were prepared by a conventional cast/softbake/thermal imidization process from the photosensitive precursors with various concentrations of DMAEM. The structure and properties of the polyimide films were investigated by small-angle and wide-angle x-ray scattering, refractive indices and birefringence analysis, residual stress and relaxation analysis, stress-strain analysis, and dynamic mechanical thermal analysis. In comparison with the polyimide film from the poly(amic acid), the films, which were imidized from the photosensitive precursors, exhibited a better molecular order and microstructure; however, they exhibited less molecular orientation in the film plane. Despite the enhancement in both the molecular order and microstructure, the film properties (i.e., mechanical properties, thermal expansion, residual stress, optical properties, dielectric constant, and water sorption) degraded overall due to both the decrease in molecular in-plane orientation and the formation of microvoids caused by the bulky photosensitive group during thermal imidization. That is, on one hand, the PSPI precursor formation provides an advantageous, direct patternability to the BPDA-PDA precursor, and on the other hand, it results in degraded properties to the resulting polyimide film. © 1995 John Wiley & Sons, Inc.     

Facile synthesis of C-phosphanylformamidines via a carbene pathway

A direct synthetic approach to C-phosphanyl-N,N-dialkyl-N′-aryl(alkyl)-formamidines was developed. It was shown that phosphorylation of the formamidines proceeds at the nitrogen atom affording N-phosphanylformamidinium salts. Upon deprotonation, these salts gave C-phosphanylformamidines via formation of carbenes followed by a 1,2-phosphorus shift.     

Facile synthesis of dihaloheterocycles via electrophilic iodocyclization

An efficient and facile electrophilic iodocyclization for the synthesis of various O-, N-, and S-containing dihaloheterocycles has been developed. A wide range of the substituted propargyl alcohols having -OH, -NTs, and -SAc functional groups reacted with molecular iodine or bromoiodine at ambient temperature to produce the corresponding dihalogenated O-, N-, and S-containing five- and six-membered heterocycles in good to high yields; Under optimized solvent conditions, the reactions of various substituted but-2-yn-1-ones bearing -OH, -NTs, and -SAc functional groups at C4-position, with iodine or bromoiodine at ambient temperature afforded the corresponding 3,4-diiodo- and 3-bromo-4-iodo-substituted furans, pyrroles, and thiophenes in good to high yields. Further transformation of the resulting iodine- or bromine-containing products to polyaromatics potentially of useful as organo-material intermediates has been investigated.     

Facile synthesis of a new family of cage molecules

Cyclic (2+3) Schiff-base condensation of the triamine tris(2-aminoethyl) amine with a range of dicarbonyls produces, in high yield, a new series of cage molecules.     

Facile Synthesis of Trisubstituted Thioindoles via a Novel Tricyclic Thiolactone Intermediate

Methodology to conveniently and systematically prepare biologically active indole 9 is described.     

Facile synthesis of Gramicidin S via cyclication of a linear pentapeptide

Azide and N-hydroxysuccinimide ester of five pentapeptides related to gramicidin S (cyclic decapeptide) were cyclized to determine the ratio of dimer to monomer in the cyclization product, the pentapeptide derivative with D-Phe as C-terminus giving the dimer in good yield.     

Facile synthesis of amine-terminated aromatic polyamide dendrimers via a divergent method

[structure: see text]. A novel, rapid, inexpensive, and highly efficient divergent approach for the synthesis of a 32-amine-terminated G4 polyamide dendrimer has been developed. Each generation dendrimer was successfully obtained by the condensation of the preceding generation dendrimer with the building block and the deprotection with hydrazine in one pot. All the dendrimers were easily purified by precipitation in alkaline water, and the purity was confirmed by NMR, MALDI-TOF mass spectra, and elemental analysis.     

Facile synthesis of 3,4-dihalofurans via electrophilic iodocyclization

A facile, efficient, and general synthetic method for 3,4-dihalofurans has been developed via the electrophilic iodocyclization of various 4-hydroxy-2-but-2-yn-1-ones. The use of MeOH as a solvent is crucial for the efficient chemoselective synthesis of the corresponding 3,4-dihalofurans.     

Facile synthesis of functionalised spiroethers via radical cyclisations

Alcohols bearing suitable chains for radical initiation are smoothly condensed with cyclic β-diketones to afford systems which undergo radical cyclisation to give various spiroether products.     

Facile synthesis of 3,4-diiododihydrothiophenes via electrophilic iodocyclization

A facile, efficient, and general synthetic method for the construction of 3,4-diiododihydrothiophenes has been developed via the electrophilic iodocyclization of various S-hydroxy-2-butynyl ethanethioates. Application of the resulting iodine-containing products in organic transformations has been investigated.     

Facile Synthesis of Novel Aminopyrrolobenzimidazole System via Regioselective Amination

A new series of substituted pryrrolobenzimidazoles have been prepared via regioselective displacement of chlorine atom from dichloropyrrolobenzimidazoles with various amine nucleophiles. The dichloro compounds were obtained from the reaction of ortho phenylene diamine compounds with dichloromaleic anhydride.     

Pattern formation of polyimide by using photosensitive polybenzoxazole as a top layer

A versatile method for positive-type patterning of polyimide (PI) based on a two-layer photosensitive poly(benzoxazole) (PSPBO) and poly(amic acid) (PAA) film has been developed to provide a promising material in the field of microelectronics. This patterning system consisted of a pristine PAA thick bottom-layer and a poly(o-hydroxy amide) (PHA) thin top layer with 9,9-bis[4-(tert-butoxycarbonyl-methyloxy)phenyl]fluorene (TBMPF) as a dissolution inhibitor, and (5-propylsulfonyloxyimino-5H-thiophene-2-ylidene)-(2-methylphenyl)-acetonitrile (PTMA) as a photoacid generator (PAG). The PHA and PAA were prepared from 4,4′-(hexafluoroisopropylidene)-bis(o-aminophenol) and 4,4′-oxybis(benzoic acid) derivatives, and 3,3′,4,4′-biphenyltetracarboxylic dianhydride and 4,4′-oxydianiline, respectively, in N,N-dimethylacetamide. This two-layer system based on PHA (150-nm thickness) and PAA (1.5-μm thickness) showed high sensitivity of 35 mJ/cm² and high contrast of 10.3 when exposed to a 365 nm line (i-line), post-baked at 100 °C for 2 min, and developed in a 2.38 wt.% tetramethylammonium hydroxide aqueous solution/5 wt.% iso-propanol at 25 °C. A clear positive image of a 4-μm line-and-space pattern was printed on a film which was exposed to 100 mJ/cm² of i-line by a contact-printing mode and fully converted to the corresponding PBO/PI pattern upon heating at 350 °C, confirmed by FT-IR spectroscopy. This two-layer system could be applied to the patterning of various PAAs.     

Novel cofactors via post-translational modifications of enzyme active sites

Recent crystallographic and biochemical studies have revealed the existence of numerous novel post-translational modifications within enzyme active sites. These modifications create structural and functional diversity. Although the function and biosynthesis of some of these modifications are well understood, others need further investigation.     

Facile peptide thioester synthesis via solution-phase tosylamide preparation

Preparation of peptide thioester is essential for native chemical ligation and block condensation. Our novel methodology involves conversion of the carboxylic acid of a peptide into a thioester using p-toluenesulfonyl isocyanate, followed by alkylation, then thiol substitution. Our methodology can also be used for the preparation of glycopeptide thioesters. Furthermore, it is possible to carry out the reaction as a sequential peptide chemical ligation.     

Facile synthesis of thiazoles via an intramolecular thia-Michael strategy

A mild and efficient method for the synthesis of substituted thiazoles is reported via one-pot N-desilylation, thioacylation/oxythioacylation/thiothioacylation followed by thia-Michael cycloisomerisation. This method has a general applicability to introduce various oxo and thio functionalities including aliphatic and aromatic moieties, especially at the C2-position of thiazoles.     

Facile synthesis of multifullerene-OPE hybrids via in situ ethynylation

[reaction: see text] A series of fullerene-terminated oligo(phenylene ethynylene)s (OPEs) (1a-d and 2) have been synthesized and further characterized by cyclic voltammetry (CV) and UV-vis spectroscopy. The key step in the syntheses is an effective one-pot reaction that allows the attachment of C(60) to multiple terminal alkynes.     

New fluorinated thermoplastic elastomers. III. Novel method of synthesis and characterization of alternating fluorinated polyimide/fluorinated polyhybridsiloxane block copolymers via polycondensation

The synthesis of fluorinated polyimide/fluorinated polyhybridsiloxane (FPI–FPHSX) block copolymers was achieved through the polycondensation of α,ω‐dichlorosilane fluorinated polyimides and α,ω‐disilanol fluorinated polyhybridsiloxanes. Three FPI–FPHSX block copolymers with 41, 50, and 76 wt % polyimide were synthesized and characterized by the tuning of the number‐average molecular weight of the soft polyhybridsiloxane segments. The influence of the soft‐segment length on the behavior of the thermoplastic elastomer material was studied, including the surface tension and thermal properties. The thermomechanical properties of the FPI–FPHSX block copolymers were also examined. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2237–2247, 2005     

Facile synthesis of some new functionalized 2-selenoxopyrimidines

Abstract

Some new functionalized 2-selenoxodihydropyrimidines 1–6 were synthesized in good yields via a simple one-pot reaction. The simple method depended on the reaction of selenourea with some nitrile active methylene compounds under basic-catalyzed conditions. Also, treatment of selenourea with each of malononitrile and ethyl cyanoacetate in the presence of benzaldehyde under the same basic reaction conditions afforded the 2-selenoxopyrimidine-5-carbonitriles 7 and 8, respectively. Furthermore, selenourea reacted with benzaldehyde and different β-dicarbonyl compounds under Biginelli reaction conditions to afford the 2-selenoxo-1,2,3,4-tetrahydropyrimidine-5-carboxylates 10, 11 and 13. Using acetylacetone as a substrate in Biginelli reaction yielded the unexpected 5-benzylidene-4,6-dimethyl-pyrimidine-2(5H)-selenone (14). The structures of the synthesized compounds were established on the basis of elemental analysis, IR, ¹H- and ¹³C-NMR and mass spectral data.