A personal journey on using polymerization in aqueous dispersed media to synthesize polymers with branched structures

Several projects were discussed to demonstrate the intriguing power of radical polymerization in aqueous dispersed media to regulate the branched structures in functional polymeric nanomaterials.     

Environmentally responsive "hairy" nanoparticles: mixed homopolymer brushes on silica nanoparticles synthesized by living radical polymerization techniques

This article reports on the preparation of environmentally responsive "hairy" nanoparticles by growth of mixed poly(tert-butyl acrylate) (PtBA)/polystyrene (PS) brushes from silica particles using living radical polymerization techniques and subsequent hydrolysis of PtBA to produce amphiphilic mixed poly(acrylic acid) (PAA)/PS brushes. Silica particles were synthesized by the Stober process and were functionalized with an asymmetric difunctional initiator-terminated monolayer. Surface-initiated atom transfer radical polymerization of tBA was carried out in the presence of a free initiator. Kinetics study showed that the polymerization was well controlled. By cleaving PtBA off the particles, the molecular weights of the grafted and free polymers were found to be essentially identical. Mixed PtBA/PS brushes were obtained by the nitroxide-mediated radical polymerization of styrene from PtBA particles. The M(n) of the grafted PS was found to be the same as that of the free PS formed in the solution from the free initiator. Amphiphilic mixed PAA/PS brush-coated nanoparticles were synthesized from mixed PtBA/PS particles by hydrolysis of PtBA with iodotrimethylsilane. Tyndall scattering experiments and (1)H NMR study showed that the mixed PAA/PS particles can be dispersed and form a stable suspension in CHCl(3), a selective solvent for PS, and also in CH(3)OH, a selective solvent for PAA, demonstrating the capability of these hairy nanoparticles to undergo chain reorganization in response to environmental changes.     

Hairy Core–Shell Nanoparticles via RAFT: Where are the Opportunities and Where are the Problems and Challenges?

The preparation of hairy core–shell nanoparticles including (crosslinked) micelles, unimolecular micelles such as star polymers with block structures in each arm and surface grafted nanoparticles such as inorganic particles via the RAFT process are discussed. The RAFT process is certainly a highly versatile process. However, it should not be forgotten that RAFT polymerization is a process, i.e., superimposed on a conventional free radical process. Furthermore, the livingness of the process is dependent on the accessibility of the RAFT group, which can be hampered in certain approaches such as star synthesis and surface grafting from nanoparticles. Nevertheless, the RAFT process is a versatile toolbox that offers good solutions to a range of problems in the preparation of hairy nanoparticles.

     

On growth patterns of branched polymer architectures

In nature trees may have many different forms and so have all natural branched structures. Differences in branched architectures of synthetic polymers can only be explained by kinetics. We compare radical polymerization of low density Polyethylene (PE) and PE polymerization with Constrained Geometry Catalyst (CGC) metallocene. The architectures generated by our synthesis algorithms revealed marked differences between the two PE-systems. Metallocene-PE turned out to be more comb-like. This could partially be explained by analyzing growth patterns of the two PE types as incorporated in the architecture synthesis algorithms.     

Chemoenzymatic Synthesis of Branched Polymers

Summary: The combination of enzymatic polymerization with ATRP for the synthesis of branched (block) copolymers was investigated. Heterotelechelic polycaprolactone macroinimer was synthesized in a one‐pot enzymatic procedure by using 2‐hydroxyethyl α‐bromoisobutyrate as a bifunctional initiator. A polymerizable end group was introduced by subsequent in situ enzymatic acrylation with vinyl acrylate. Branched polymers were obtained by subsequent atom transfer radical polymerization (ATRP).

Enzymatic synthesis of heterotelechelic macromonomers and subsequent self condensing vinyl polymerization by ATRP.     

Hydrodynamic characteristics of branched polystyrenes with varying content of a highly branched fraction

The branched polymers containing different amounts of the highly branched fraction are synthesized by the radical copolymerization of styrene and divinylbenzene under conditions of the reversible inhibition by 2,2,6,6-tetramethylpiperidine-1-oxyl. The branched polystyrenes are studied by size-exclusion chromatography combined with static light scattering, viscometry, and pulsed-field gradient nuclear magnetic resonance. The branched polymers prepared by living radical polymerization (in the presence of 2,2,6,6-tetramethylpiperidine-1-oxyl) feature reduced intrinsic viscosities and increased self-diffusion coefficients compared with their linear analogs. As the content of the highly branched fraction in the synthesized polymers grows, the Zimm contraction factor in toluene solution decreases to g′ = 0.13. The Kuhn-Mark-Houwink parameters for these polymers in toluene solution (a = 0.43) confirm the nonlinear architecture of macromolecules.     

Synthesis of branched polystyrene by ATRP exploiting divinylbenzene as branching comonomer

Branched polystyrenes have been synthesized using atom transfer radical polymerization (ATRP) of styrene in the presence of divinyllbenzene (DVB) as branching comonomer. The synthesis was completed via facile one pot approach. Mole ratio of styrene to DVB in range of 5:1-30:1 was employed to obtain soluble polymers. The kinetics of the polymerization and evolution of polymer compositions were revealed by determining the conversions of reactants by gas chromatography (GC). The growth of molecular weight was monitored by GPC and the results indicate that the branched polymers were formed by self-condensing vinyl polymerization (SCVP) of AB^∗ monomer or macromonomers. The branched structure of the resulting polymers was confirmed by the remarkable discrepancies of the weight average molecular weights determined by GPC and multi angle laser light scattering (MALLS). The specific viscosity of the resulting polymer is also much lower compared with that of linear analogues. The influence of dosage of initiator and catalyst on the yield and molecular weights of the resulting polymers was also investigated.     

Atom transfer radical polymerization in aqueous dispersed media

During the last decade, atom transfer radical polymerization (ATRP) received significant attention due to its exceptional capability of synthesizing polymers with pre-determined molecular weight, well-defined molecular architectures and various functionalities. It is economically and environmentally attractive to adopt ATRP to aqueous dispersed media, although the process is challenging. This review summarizes recent developments of conducting ATRP in aqueous dispersed media. The issues related to retaining “controlled/living” character as well as colloidal stability during the polymerization have to be considered. Better understanding the ATRP mechanism and development of new initiation techniques, such as activators generated by electron transfer (AGET) significantly facilitated ATRP in aqueous systems. This review covers the most important progress of ATRP in dispersed media from 1998 to 2009, including miniemulsion, microemulsion, emulsion, suspension and dispersed polymerization.      

Thermosensitive hairy hybrid nanoparticles synthesized by surface-initiated atom transfer radical polymerization

This article reports on the synthesis of thermosensitive polymer brushes on silica nanoparticles by atom transfer radical polymerization (ATRP) and the study of thermo-induced phase transitions in water. Silica nanoparticles were prepared by the St?ber process and the surface was functionalized by an ATRP initiator. Surface-initiated ATRPs of methoxydi(ethylene glycol) methacrylate (DEGMMA) and methoxytri(ethylene glycol) methacrylate (TEGMMA) were carried out in THF at 40 degrees C in the presence of a free initiator, benzyl 2-bromoisobutyrate. The polymerizations were monitored by 1H NMR spectroscopy and gel permeation chromatography. The hairy hybrid nanoparticles were characterized by thermogravimetric analysis and scanning electron microscopy, and the thermoresponsive properties were investigated by variable temperature 1H NMR spectroscopy and dynamic light scattering. The cloud points of free poly(DEGMMA) and poly(TEGMMA) in water were around 25 and 48 degrees C, respectively. The thermo-induced phase transitions of polymer brushes on silica nanoparticles began at a lower temperature and continued over a broader range (4-10 degrees C) than those of free polymers in water (< 2 degrees C).     

Fullerene-containing branched polymethacrylates and polymer networks: Synthesis,structure, and properties

Branched poly(methyl methacrylates) containing covalently and noncovalently attached fullerene C₆₀ are synthesized and characterized by IR and UV spectroscopy. The basic physicochemical characteristics of the branched poly(methyl methacrylate) comprising covalently attached fullerene and the non-functionalized branched polymer of the same composition are compared. The effect of fullerene-containing branched poly(methyl methacrylates) on the kinetics of the crosslinking radical polymerization of 1,6-hexanediol dimethacrylate and on the structural-physical (mechanical, thermomechanical, and diffusion-sorption) properties of the resulting polymers is examined. The role of fullerene attached to the branched poly(methyl methacrylate) as an inhibitor of the crosslinking radical polymerization of dimethacrylate and as a modifier of the structure and properties of the polymers is ascertained.     

Tandem chain walking polymerization and atom transfer radical polymerization for efficient synthesis of dendritic nanoparticles for bioconjugation

A tandem polymerization methodology, chain walking polymerization (CWP) followed by atom transfer radical polymerization, was developed for efficient synthesis of nanoparticles for bioconjugation. Using the chain walking palladium-alpha-diimine catalyst (catalyst 1), dendritic polymers bearing multiple initiation sites were synthesized and used as macroinitiators for subsequent Cu(I)-mediated ATRP. Control of molecular weight and size of the water-soluble core-shell polymeric nanoparticles was achieved by tuning reaction conditions. Addition of an N-acryloyloxysuccinamide (NAS) monomer at the end of the ATRP afforded NHS-activated polymer nanoparticles. Conjugation with both small dye molecules and protein (ovalbumin) yielded nanoparticle conjugates with relatively high dye or protein per particle ratio. With the efficient synthesis and good biocompatibility, these nanoparticles may find many potential applications in bioconjugation.     

Synthesis of highly branched polymers via three-dimensional radical polymerization in the presence of oxygen

It is shown that branched and highly branched vinyl polymers can be prepared by three-dimensional radical polymerization in the presence of dissolved oxygen, as exemplified by the oxidative copolymerization of styrene and divinylbenzene. The conditions of synthesis of highly branched polymers with a high yield??the ratio between monovinyl and divinyl comonomers and the rate of oxygen bubbling??are determined. The kinetics of formation of branched polystyrenes and the features of their molecular-mass distribution are studied. Elemental-analysis data show that the polymeric product contains 22?C24 wt % oxygen, which, according to the IR data, enters into the composition of carbonyl, hydroxyl, and peroxide groups. The thermal decomposition of polymeric products is investigated via the TGA-DSC method. The main exothermal peak at ??145°C is associated with the decomposition of peroxide groups, which is accompanied by the evolution of formaldehyde.     

Biotinylated thermoresponsive core cross-linked nanoparticles via RAFT polymerization and "click" chemistry

A straightforward approach to the synthesis of "clickable" thermoresponsive core cross-linked (CCL) nanoparticles was developed. This approach was based on reversible addition-fragmentation chain transfer (RAFT) radical cross-linking polymerization of styrene and divinylbenzene with azide-functionalized poly(N-isopropylacrylamide) (PNIPAM-N(3)) as macro chain transfer agent in a selective solvent. Spherical nanoparticles with a diameter of 12nm were obtained after 24h polymerization. When the lyophilized CCL nanoparticles were dispersed in THF, spherical nanoparticles were observed, confirming the stability of CCL nanoparticles. The transmission electron microscopy (TEM) studies demonstrated that spherical nanoparticles and wormlike structure coexisted in the aqueous solution. The CCL nanoparticles have a lower critical solution temperature (LCST) at about 29.6°C, a little lower than that of PNIPAM homopolymer. Biotin molecules were conjugated to the surface of CCL nanoparticles via "click" chemistry in aqueous media. After bioconjugation, the LCST shifted to 28.3°C. The bioavailability of biotin to protein avidin was evaluated by a 4'-hydroxyazobenzene-2-carboxylic acid/avidin (HABA/avidin) binding assay and TEM.     

Designing Branched Deoxybenzoin Polyesters as Polymeric Flame Retardants

AB₂ monomers present opportunities to conduct one‐pot syntheses of highly branched or “hyperbranched” polymers, which are known for their distinct physical and chemical properties relative to linear polymers. This paper describes the synthesis of a deoxybenzoin‐containing AB₂ monomer and its use in step‐growth polymerization to prepare branched aromatic polyesters. Highly soluble deoxybenzoin polymers were obtained with degrees of branching reaching 0.36 and estimated molecular weights approaching 20 kDa. The phenolic chain ends of the polymer allowed for post‐polymerization modification by silylation and esterification chemistry. TGA and microscale combustion calorimetry revealed these novel aromatic polyesters to possess the critically important characteristics of flame‐retardant polymers, such as high char yield and low heat release. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1765–1770     

3D single cyclized polymer chain structure from controlled polymerization of multi-vinyl monomers: beyond Flory-Stockmayer theory

Controlled/living radical polymerization (CRP) is a widely used technique that allows the synthesis of defined polymer architectures through precise control of molecular weights and distributions. However, the architectures of polymers prepared by the CRP techniques are limited to linear, cross-linked, and branched/dendritic structures. Here, we report the preparation of a new 3D single cyclized polymer chain structure from an in situ deactivation enhanced atom transfer radical polymerization of multivinyl monomers (MVMs), which are conventionally used for the production of branched/cross-linked polymeric materials as defined by P. Flory and W. Stockmayer nearly 70 years ago. We provide new evidence to demonstrate that it is possible to kinetically control both the macromolecular architecture and the critical gelling point in the polymerization of MVMs, suggesting the classical Flory-Stockmayer mean field theory should be supplemented with a new kinetic theory based on the space and instantaneous growth boundary concept.     

Molecular-Integrated Phospholipid Polymer Nanoparticles with Highly Biofunctionality

Surface modifications of nanoparticles with phospholipid polymers composed of 2-methacryloyloxyethyl phosphorylcholine (MPC), are summarized. The MPC can be available for various polymerization methods such as conventional radical polymerization and living radical polymerization, and easily copolymerized with other vinyl compounds. The MPC polymers have been widely used as biocompatible coating and stabilizer for nanoparticles even when they are under biological environment. Additionally, for immobilization of biomolecules, such as antibody and enzyme, the MPC polymers having active ester group are applicable. These MPC polymers coated on the nanoparticles immobilize protein under mild condition and the protein maintained bioactivity well. Moreover, introduction of functional inorganic nanocrystals inside of the nanoparticles is effective to obtain good imaging tool for specific cells. The potential of molecular integration on nanoparticles based on MPC polymer chemistry will be expanded nanobiosensing, nanoimaging and nanodiagnostic system.     

Design of New Reaction Fields for Spherical Polypyrrole Particle Synthesis

Summary: Polypyrrole conducting polymers have been investigated widely for various applications because of their thermal and environmental stability and good electrical conductivity. Using chemical oxidative polymerization for the synthesis of polypyrrole particles, the reaction rate is very fast. In this study, we designed two new reaction fields for the synthesis of spherical polypyrrole nanoparticles. In the first system, oxidative polymerization of monomer droplets infused in a water/oil (W/O) emulsion reaction field was investigated. The second system employed dispersed monomer in an aqueous solution with a low concentration of oxidant in which polymerization was augmented by ultrasonic irradiation. Effective control of the reaction rate was important for enabling the synthesis of fine spherical polypyrrole particles.     

The effects of ring substituents in aniline on the reactivity of PANI with hydrogen tetrachloroaurate and the dispersion of gold nanoparticles

As expected from theoretical predictions, the polymerization of aniline was affected by the substituent group on the benzene ring. The rate of the polymerization varied as poly(2‐chloroaniline) (PANICl) < < poly(2‐methylaniline) (PANIMe) < polyaniline (PANI). While the rate of polymerization was determined largely by electronic effects of the substituent groups, the reactivity of the polymers was determined by the steric effects. The order of the rate of reaction of the polymers with AuCl₄⁻ was PANIMe < PANICl < < PANI. The amount of Au incorporated into the polymer matrix followed a similar trend. However, the size of the gold nanoparticles did not differ greatly. Gold nanoparticles dispersed on PANICl and PANIMe were more stable in acidic media than those on PANI. Copyright © 2015 John Wiley & Sons, Ltd.     

Stimuli-responsive star polymers

Stimuli-responsive star polymers gain more and more interest over the last decades due to their unique properties compared to their linear counterparts. The branched structure for instance has influence on the responsive behavior of these polymers. This review offers an overview of stimuli-responsive star polymers generated by different polymerization techniques, e.g. anionic and controlled radical polymerization (CRP). Beside conventional branched homopolymers different other types like block copolymers, miktoarm star copolymers, core crosslinked star polymers (CCS) and comb polymers are also presented. Furthermore their responsive behavior in solution or immobilized on a substrate, and their applications are outlined. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2980–2994     

HyperMacs. Long Chain Branched Analogues of Hyperbranched Polymers Prepared by the Polycondensation of AB2 Macromonomers

We describe here a new strategy for the synthesis of polymers with highly branched architectures. The strategy involves the synthesis by anionic polymerization of well-defined AB₂ polystyrene macromonomers with molecular weights from 3,600 to 94,000 gmol⁻¹, which are then converted via a one-pot polycondensation reaction into high molecular weight, long-chain (hyper)branched architectures. Since the Hyperbranched structures are built up from condensation Macromonomers we have coined the term ‘HyperMac’ to describe these branched polymers. In this paper we report the synthesis of the HyperMacs, the optimal conditions for the polycondensation reaction and some preliminary characterization studies.