Catalysis by Ir(III), Rh(III) and Pd(II) metal ions in the oxidation of organic compounds with H2O2

Catalytic activities of three transition metals, as iridium (III) chloride, rhodium (III) chloride and palladium (II) chloride, were compared in the oxidation of six aromatic aldehydes (benzaldehyde, p‐chloro benzaldehyde, p‐nitro benzaldehyde, m‐nitro benzaldehyde, p‐methoxy benzaldehyde and cinnamaldehyde), two hydrocarbons (viz. (anthracene and phenanthrene)) and one aromatic and one cyclic alcohol (cyclohexanol and benzyl alcohol) by 50% H₂O₂. The presence of traces (substrate: catalyst ratio equal to 1:62500 to 1:1961) of the chlorides of iridium(III), rhodium(III) and palladium(II) catalyze these oxidations, resulting in good to excellent yields. It was observed that in most of the cases palladium(II) chloride is the most efficient catalyst. Conditions for the highest and most economical yields were obtained. Deviation from the optimum conditions decreases the yields. Oxidation in aromatic aldehydes is selective at the aldehydeic group only and other groups remain unaffected. This new, simple and economical method, which is environmentally safe, also requires less time. Reactive species of catalysts, existing in the reaction mixture are also discussed. Copyright © 2007 John Wiley & Sons, Ltd.     

Simple one‐pot conversion of organic compounds by hydrogen peroxide activated by ruthenium(III) chloride: organic conversions by hydrogen peroxide in the presence of ruthenium(III)

The aromatic compounds p‐nitrobenzaldehyde, p‐hydroxybenzaldehyde, naphthalene, toluene, catechol, quinol, aniline and toluidine dissolved in aqueous acetic acid or aqueous medium were oxidized in quantitative to good yields by 50% H₂O₂ in the presence of traces of RuCl₃ (～10^?8 mol; substrate/catalyst ratio 1488:1 to 341 250:1). Conditions for highest yields, in the most economical way, were obtained. Higher catalyst concentrations decrease the yield. Oxidation in aromatic aldehydes is selective at the aldehydic group only. In the case of hydrocarbons, oxidation results in the introduction of a hydroxyl group with >85% (in the case of toluene) selectivity for the ortho position. Formation of low‐molecular‐weight polyaniline was reduced to 10%, along with 90% formation of higher molecular weight polyaniline. In this new, simple and economical method, which is environmentally safe and requires less time, oxo‐centered carboxylate species of ruthenium(III) in acetic acid medium and hydrated ruthenium(III) chloride in aqueous medium probably catalyze the oxidation. Copyright © 2005 John Wiley & Sons, Ltd.     

Green Biginelli‐type Reaction: Solvent‐free Synthesis of 5‐unsubstituted 3,4‐dihydropyrimdin‐2(1H)‐ones

The Biginelli‐type compounds, 5‐unsubstituted 3,4‐dihydropyrimdin‐2(1H)‐ones were synthesized by a one‐pot three‐component condensation of aromatic aldehydes, aromatic ketones and urea in the presence of SnCl₄ · 5H₂O under solvent‐free conditions. The advantages of this method are short reaction time (4–10 min), excellent yields (74–97%), inexpensive catalyst and solvent‐free conditions. A plausible mechanism was proposed.     

Zr(HSO4)4‐catalyzed one‐pot three‐component synthesis of 7‐alkyl‐6H,7H‐naphtho[1′,2′:5,6]pyrano[3,2‐c]chromen‐6‐ones

A new, one‐pot, simple thermally efficient and solvent‐free method for the preparation of 7‐alkyl‐6H,7H‐naphtho[1′,2′:5,6]pyrano[3,2‐c]chromen‐6‐ones by condensation of β‐naphthol, aromatic aldehydes, and 4‐hydroxycoumarin using Zr(HSO₄)₄ as a safe and efficient catalyst is described. This method has the advantages of high yields, a cleaner reaction, simple methodology, short reaction times, easy workup, and greener conditions. J. Heterocyclic Chem., (2011).     

A new nano‐Fe3O4‐supported organocatalyst based on 3,4‐dihydroxypyridine: an efficient heterogeneous nanocatalyst for one‐pot synthesis of pyrazolo[3,4‐b]pyridines and pyrano[2,3‐d]pyrimidines

A simple and practical strategy for the synthesis of a novel nano‐Fe₃O₄‐supported organocatalyst system based on 3,4‐dihydroxypyridine (Fe₃O₄/Py) has been developed. The prepared catalyst was characterized using Fourier transform infrared spectroscopy, transmission and scanning electron microscopies, X‐ray diffraction, vibrating sample magnetometry and energy‐dispersive X‐ray analysis. Accordingly, the Fe₃O₄/Py nanoparticles show a superparamagnetic property with a saturation magnetization of 61 emu g^?1, indicating potential application in magnetic separation technology. Our experimental results reveal that the pyridine‐functionalized Fe₃O₄ nanoparticles are an efficient base catalyst for the domino condensation of various aromatic aldehydes, Meldrum's acid and 5‐methylpyrazol‐3‐amine under very mild reaction condition and in the presence of ethanol solvent. Moreover, the synthesized catalyst was used for one‐pot, three‐component condensation of aromatic aldehydes with barbituric acid and malononitrile to produce 7‐amino‐2,4‐dioxo‐5‐phenyl‐2,3,4,5‐tetrahydro‐1H‐pyrano[2,3‐d]pyrimidine‐6‐carbonitriles. All reactions are completed in short times and all products are obtained in good to excellent yields. Also, notably, the catalyst was reused five times without significant degradation in catalytic activity and performance. Copyright © 2016 John Wiley & Sons, Ltd.     

N,N‐dimethylamino‐functionalized basic ionic liquid catalyzed one‐pot multicomponent reaction for the synthesis of 4H‐benzo[b]pyran derivatives under solvent‐free condition

A simple, clean, and environmentally benign three‐component process for the synthesis of 4H‐benzo[b]pyran derivatives using basic ionic liquid N,N‐dimethylaminoethylbenzyldimethylammonium chloride ([PhCH₂Me₂N⁺CH₂CH₂NMe₂]Cl⁻) as an efficient catalyst under solvent‐free condition is described. A wide range of aromatic aldehydes easily undergoes condensation with malononitrile and 5,5‐dimethylcyclohexane‐1,3‐dione (dimedone) under solvent‐free condition to afford the desired products of good purity in excellent yields. Taking into account environmental and economical considerations, the protocol presented here has the merits of environmentally benign, simple operation, convenient workup, and good yields. © 2009 Wiley Periodicals, Inc. Heteroatom Chem 20:91–94, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20516     

Synthesis of Tetrahydrotriazoloacridines: A Synergistic Effect of Microwave Irradiation and Brönsted Acidic Ionic Liquids

3‐Methyl‐1‐sulfonic acid imidazolium hydrogen sulfate ([MSIm][HSO₄]) catalyzed the condensation of 5‐aminobenzotriazole and 5,5‐dimethyl‐cyclohexane‐1,3‐dione (dimedone) with aromatic aldehydes under microwave irradiation. This method is efficient to synthesize 11‐aryl‐8,8‐dimethyl‐6,7,9,11‐tetrahydro[1,2,3]triazolo[4,5‐a ]acridine‐10(1H )‐one derivatives as a series of tetrahydroacridines in good to excellent yields, while the catalyst can be recovered and reused up to six times without significant loss of activity. This one‐pot three‐component reaction provided an efficient method for the synthesis of aromatic heterocycles.     

Cu(II) bromide catalyzed oxidation of aldehydes and alcohols

A variety of aromatic, aliphatic and conjugated aldehydes and alcohols were transformed to the corresponding carboxylic acids and ketones with a quantitative conversion in high yields with 70% t‐BuOOH solution in water in the presence of catalytic (5 mol%) amounts of CuBr₂ under room temperature conditions. The conversion of 4‐methoxybenzaldehyde to 4‐methoxybenzoic acid is extremely facile in MeCN at ambient temperature in the presence of 5 mol% CuBr₂ and 2 equiv. 70% t‐BuOOH (water) as the oxidant. Oxidation with t‐BuOOH (water) alone in MeCN was found to be negligible. The scope of our catalytic system is applicable for a wide range of aromatic, conjugated and aliphatic substrates. These aldehydes were converted to the corresponding carboxylic acids in good isolated yields in reasonable times. It is pertinent to mention here that mild halogenic oxidants like hypochlorites, chlorites and NBS are not suitable for substrates with electron‐rich aromatic rings, olefinic bonds and secondary hydroxyl groups. Substitutions at different positions on the phenyl ring do not hinder the reaction, although the reaction time is affected. Oxidation of α,β unsaturated derivatives resulted in the formation of the expected acid in good yield. In addition, the transformation of secondary alcohols to ketones is extremely facile. No recemization was observed for menthone. This method possesses a wide range of capabilities since it can be used with other functional groups which may not tolerate oxidative conditions, involves fairly simple method for work‐up, exhibits chemoselectivity and proceeds under ambient conditions. The resulting products are obtained in good yields within reasonable time. Copyright © 2011 John Wiley & Sons, Ltd.     

Eco‐friendly synthesis of 1,8‐dioxo‐octahydroxanthenes catalyzed by ionic liquid in aqueous media

A biodegradable functionalized ionic liquid 3‐(N,N‐dimethyldodecylammonium)propanesulfonic acid hydrogen sulfate ([DDPA][HSO₄]) was prepared and used as a Brønsted acid–surfactant‐combined catalyst for the eco‐friendly one‐pot synthesis of 1,8‐dioxo‐octahydroxanthenes at 100°C in water. Under these conditions, the reaction of various aromatic aldehydes with dimedone generated 1,8‐dioxo‐octahydroxanthenes in good yields with a simple postreaction procedure. The products could simply be separated from the catalyst/water system, and the catalyst could be reused at least six times without noticeably decreasing the catalytic activity. J. Heterocyclic Chem., (2011).     

Fe3O4@TiO2@O2PO2(CH2)NHSO3H as a novel nanomagnetic catalyst: Application to the preparation of 2‐amino‐4,6‐diphenylnicotinonitriles via anomeric‐based oxidation

A new, green and reusable nanomagnetic heterogeneous catalyst, namely Fe₃O₄@TiO₂@O₂PO₂(CH₂)NHSO₃H, was synthesized and fully characterized using suitable techniques such as infrared spectroscopy, X‐ray diffraction, scanning and transmission electron microscopies, thermogravimetry, vibrating sample magnetometry and energy‐dispersive X‐ray spectroscopy. The applicability of the constructed heterogeneous core–shell catalyst as a promoter was successfully explored for the synthesis of 2‐amino‐4,6‐diphenylnicotinonitrile derivatives upon the reaction of a good range of aromatic aldehydes, acetophenone derivatives, malononitrile and ammonium acetate. The desired products were obtained with good to high yields in short reaction times under solvent‐free conditions. The suggested mechanism offers an anomeric‐based oxidation route to the products in the final step of the synthetic pathway.     

Decarboxylative [4+2] Cycloaddition by Synergistic Palladium and Organocatalysis

A novel reaction based on synergistic catalysis, combining palladium‐ and organocatalysis has been developed. The palladium catalyst activates vinyl benzoxazinanones via a decarboxylation to undergo a [4+2] cycloaddition with iminium‐ion activated α,β‐unsaturated aldehydes. The reaction is demonstrated to proceed for a number of combinations of vinyl benzoxazinanones reacting with α,β‐unsaturated aldehydes, providing highly substituted vinyl tetrahydroquinolines in good to high yields, and excellent enantio‐ and diastereoselectivities (>98 % ee and >20:1 d.r.). The palladium catalyst used in the synergistic catalysis can be re‐used in a one‐pot sequential coupling reaction with an aromatic boronic acid forming the coupling product in 95 % yield, >20:1 d.r. and 99 % ee.     

An Efficient One-pot Synthesis of β-Amino/β-Acetamido Carbonyl Compounds via ZrCl4-catalyzed Mannich-type Reaction

Zirconium(IV) chloride catalyzed efficient one-pot synthesis of β-amino/β-acetamido carbonyl compounds at room temperature is described. In the presence of ZrCl4, the three-component Mannich-type reaction via a variety of in situ generated aldimines, with various ketones, aromatic aldehydes and aromatic amines in ethanol, led to the formation of β-amino carbonyl compounds and the four-component Mannich-type reaction of aromatic aldehydes with various ketones, acetonitrile and acetyl chloride resulted in the corresponding β-acetamido carbonyl compounds in high to excellent yields. This methodology has also been applied towards the synthesis of dimeric β-amino/β-acetamido carbonyl compounds.     

A one-pot multicomponent reaction for the synthesis of 2-amino-2-chromenes promoted by N,N-dimethylamino-functionalized basic ionic liquid catalysis under solvent-free condition

Abstract  

A simple, clean, and environmentally benign three-component process to the synthesis of 2-amino-4H-chromenes using N,N-dimethylaminoethylbenzyldimethylammonium chloride, [PhCH₂Me₂N⁺CH₂CH₂NMe₂]Cl⁻, as an efficient catalyst under solvent-free condition is described. A wide range of aromatic aldehydes easily undergo condensations with α-naphthol and malononitrile under solvent-free condition to afford the desired products of good purity in excellent yields. Taking into account environmental and economical considerations, the protocol presented here has the merits of environmentally benign, simple operation, convenient work-up and good yields. Furthermore, the catalyst can be easily recovered and reused for at least five cycles without losing its activities.     

Improved Erlenmeyer Synthesis with 5‐Thiazolone and Catalytic Mn(II) Acetate. Crystal Structure Confirmation of the Reaction Stereochemistry

2‐Phenylthiazolin‐5‐one ( 5 , a thioazlactone) condenses with various aldehydes in the presence of the mild base Mn(II) acetate as catalyst in CH₂Cl₂ solution. This leads to the corresponding Erlenmeyer reaction products ( 6 ) in excellent yields in the case of aromatic aldehydes and moderate yields in others. The mildness of the reaction conditions is apparently enabled by the aromaticity of the (putative) intermediate thiazolone anion. The structure and stereochemistry (Z) of the product derived from i‐BuCHO was confirmed by single crystal X‐ray diffraction. This study overcomes key limitations of the classical Erlenmeyer synthesis and also introduces the relatively nontoxic Mn(II) acetate as a reagent in heterocyclic chemistry.     

Fe3O4@L‐arginine magnetic nanoparticles: A novel and magnetically retrievable catalyst for the synthesis of 1′3‐diaryl‐2N‐azaphenalene

The catalytic activity of l ‐arginine‐coated nano‐Fe₃O₄ particles (Fe₃O₄@l ‐arginine) proves they are a novel magnetic catalyst without the use of heat and reflux for the synthesis of 1,3‐diaryl‐2‐N‐azaphenalene derivatives and n‐acyl‐1,3‐diaryl‐2‐N‐azaphenylene derivatives in a one‐pot pseudo‐five‐component condensation reaction of compounds of 2,7‐naphthalene diol, aldehydes, and ammonia derivatives (ammonium acetate or ammonium hydrogen phosphate) and solvent (water and alcohol) with high yield and short reaction times, economical, and simple workup. The structure and magnetic properties of the obtained nanoparticles were characterized via Fourier transform infrared spectroscopy (IR) and field emission scanning electron microscopy (FE‐SEM). The results demonstrated that the average size of the synthesized magnetite nanoparticles is about 21 nm. In addition, the heterogeneous catalyst can be easily recovered magnetically and can be reused for further runs without significant loss of its catalytic activity.     

Convenient Synthesis of 14‐Aryl‐14‐H‐dibenzo[a,j]xanthenes Catalyzed by Acyclic Brønsted Acidic Ionic Liquid [H—NMP]+[HSO4]− under Microwave Irradiation

Efficient method for direct preparation of 14‐aryl‐14‐H‐dibenzo[a,j]xanthenes through condensation of β‐naphthol with various aromatic aldehydes in the presence of the catalytic amount of [H—NMP]⁺[HSO₄]^? under microwave irradiation was described. This method has the advantages such as; very easy reaction workup, absolute separation of catalyst from the reaction mixture and smooth recyclability of catalyst. In this reaction 14‐aryl‐14‐H‐dibenzo[a,j]xanthenes were obtained as desired products in excellent yields and short reaction times via green and one‐pot procedure.     

Efficient Room‐Temperature Synthesis of Tri‐ and Tetrasubstituted Imidazoles Catalyzed by ZrCl4

A general protocol has been developed for the rapid synthesis of 2,4,5‐trisubstituted and 1,2,4,5‐tetrasubstituted imidazoles in high yields using ZrCl₄ as an efficient catalyst at room temperature. A variety of aromatic, aliphatic, and terpenoidal aldehydes underwent condensation with NH₄OAc/amines to give the imidazoles. Similarly, the imidazole glycoconjugates are prepared in good yields from the corresponding glycosyl aldehydes.     

An Eficient One‐Pot Synthesis of 1,4‐Dihydropyridines Catalyzed by Magnetic Nanocrystalline Fe3O4

An efficient approach for one‐pot three‐component reaction of aromatic amines, α,β‐unsaturated aldehydes and β‐keto esters using magnetic nanocrystalline Fe₃O₄ as a catalyst has been described. The corresponding 1,4‐dihydropyridines are obtained in good yields under mild conditions. In addition, the catalyst can be recovered with a magnet and reused at least five consecutive cycles without appreciable loss of its catalytic activity.     

Cationic organotin cluster [t‐Bu2Sn(OH)(H2O)]22+2OTf−‐catalyzed one‐pot three‐component syntheses of 5‐substituted 1H‐tetrazoles and 2,4,6‐triarylpyridines in water

The cationic organotin cluster [t‐Bu₂Sn(OH)(H₂O)]₂²⁺2OTf^? is easy to prepare and stable in air. The catalytic activity of [t‐Bu₂Sn(OH)(H₂O)]₂²⁺2OTf^? as a neutral organotin Lewis acid catalyst is probed through the one‐pot three‐component syntheses of 5‐substituted 1H‐tetrazoles from aldehydes, hydroxylamine hydrochloride and sodium azide, and of 2,4,6‐triarylpyridines from aromatic aldehydes, substituted acetophenones and ammonium acetate. The reactions proceed well in the presence of 1 mol% of [t‐Bu₂Sn(OH)(H₂O)]₂²⁺2OTf^? in water and provide the corresponding 5‐substituted 1H‐tetrazoles and 2,4,6‐triarylpyridines in good to excellent yields. The method reported has several advantages such as the catalyst being neutral, low catalyst loading and use of water as a green solvent.     

An Efficient Synthesis of [(Tosylamino)alkyl]naphthalenols by Nucleophilic Addition of Naphthalen‐2‐ol with N‐Tosyl Imines Using Boron Trifluoride Etherate as Catalyst

[(Tosylamino)alkyl]naphthalenols have efficiently been synthesized by nucleophilic addition of naphthalen‐2‐ol with N‐tosyl imines (derived from both aromatic and aliphatic aldehydes) in the presence of BF₃?OEt₂ as a catalyst at room temperature. The products are formed within 5–9 h in high yields (72–91%).