Simultaneous saccharification and cofermentation of peracetic acid-pretreated biomass

Previous work in our laboratories has demonstrated the effectiveness of peracetic acid for improving enzymatic digestibility of lignocellulosic materials. The use of dilute alkali solutions as a pre-pretreatment prior to peracetic acid lignin oxidation increased carbohydrate hydrolysis yields in a synergistic as opposed to additive manner. Deacetylation of xylan is easily achieved using dilute alkali solutions under mild conditions. In this article, we evaluate the effectiveness of peracetic acid combined with an alkaline pre-pretreatment through simulataneous saccharification and cofermentation (SSCF) of pretreated hybrid poplar wood and sugar can ebagasse. Respective ethanol yields of 92.8 and 91.9% of theoretical are achieved using 6% NaOH/15% peracetic acid-pretreated substrates and recombinant Zymomonas mobilis CP4/p ZB5. Reduction of acetyl groups of the lignocellulosic materials is demonstrated following alkaline pre-pretreatments. Such processing may be helpful in reducing peracetic acid requirements. The influence of deacetylation is more significant in combined pretreatments using lower peracetic acid loadings.     

Sulfolane pretreatment of shrub willow to improve enzymatic saccharification

Pretreatment has been regarded as the most efficient strategy for conversion of lignocellulosic biomass to fermentable sugars. In this work, sulfolane pretreatment was performed to break the intricate structure of shrub willow for inhabitation of the enzymatic accessibility to holocellulose. The effects of varying pretreatment parameters on enzymatic hydrolysis of shrub willow were investigated. It was found that sulfolane was more compatible with lignin instead of carbohydrate, and the loss of carbohydrate could be attributed to water and acid generated from sulfolane. The optimum conditions leading to maximal sugar recovery from enzymatic saccharification were confirmed. After pretreatment of shrub willow powder in sulfolane at 170 °C for 1.5 h with mass ratio of sulfolane to substrate of 5, the sugar release could reach 555 mg/g raw materials (352 mg glucose, 203 mg xylose) when combining 20 FPU cellulase, 20 CBU β-glucosidase, and 1.5 FXU xylanase, representing 78.2 % of glucose and 56.6 % of xylose in shrub willow. This enhanced enzymatic saccharification was due to delignification and removal of a proportion of hemicelluloses, as confirmed by X-ray diffraction analysis, scanning electron microscopy, Fourier-transform infrared spectroscopy, thermogravimetric analysis, gas chromatography, and ionic chromatography. Thus, these studies prove sulfolane pretreatment to be an effective and promising approach for biomass to biofuel processing.     

Enhanced Enzymatic Saccharification of Barley Straw Pretreated by Ethanosolv Technology

The fermentable sugars in lignocellulosic biomass are derived from cellulose and hemicellulose, which are not readily accessible to enzymatic saccharification because of their recalcitrance. An ethanosolv pretreatment method was applied for the enzymatic saccharification of barley straw with an inorganic acid. The effects of four process variables (temperature, time, catalyst dose, and ethanol concentration) on the barley straw pretreatment were analyzed over a broad range using a small composite design and a response surface methodology. The yield of the residual solid and composition of the solid fraction differed as ethanosolv conditions varied within the experimental range. A glucan recovery, xylan recovery, and delignification were 85%, 14%, and 69% at center point conditions (170°C, 60 min, 1.0% (w/w) H₂SO₄, and 50% (w/w) ethanol), respectively. Ethanosolv pretreatment removed lignin effectively. Additionally, the highest enzymatic digestibility of 85.3% was obtained after 72 h at center point conditions.     

Alkaline and peracetic acid pretreatments of biomass for ethanol production

Prehydrolysis with dilute acid and steam explosion constitute the most promising methods for improving enzymatic digestibility of biomass for ethanol production. Despite world wide acceptance, these methods of pretreatment are quite expensive considering costs for the reactor, energy, and fractionation. Using peracetic acid is a lignin-oxidation pretreatment with low-energy input by which biomass can be treated in a silo-type system without need for expensive capitalization. Experimentally, ground hybrid poplar and sugar cane bagasse are placed in plastic bags and a peracetic acid solution is added to the biomass in different concentrations based on ovendried biomass. The ratio of solution to biomass is 6∶1 and a 7-d storage period at ambient temperature (20°C) has been used. As an auxiliary method, a series of pre-pretreatments using stoichiometri camounts of sodium hydroxide and ammonium hydroxide based on 4-methyl-glucuronic acid and acetyl content in the biomass are performed before addition of peracetic acid. The basic solutions are added to the biomass in a ratio of 14∶1 solution to biomass, and mixed for 24 h at the same ambient temperature. Biomass is filtered and washed to a neutral pH before peracetic acid addition. The aforementioned procedures give high xylan content substrates as a function of the selectivity of peracetic acid for lignin oxidation and the mild conditions of the process. Consequently, xylanase/β-glucosidase combinations were more effective than cellulase preparations in hydrolyzing these materials. The pretreatment efficiency was evaluated through enzymatic hydrolysis and simultaneous saccharification and cofermentation (SSCF) tests. Peracetic ac treatment improves enzymatic digestibility of hybrid poplar and sugar cane bagasse with no need of high temperatures. Alkaline treatments are helpful in reducing peracetic acid requirements in the pretreatment.     

Typical conversion of lignocellulosic biomass into reducing sugars using dilute acid hydrolysis and alkaline pretreatment

The development and production of fossil fuel alternatives have become one of the main focal points in recent investigations. Lignocellulosic biomass is a renewable source of fermentable sugars for second-generation biofuels and chemicals via biotechnological pathways. However, the presence of lignin and hemicellulose in lignocellulosic biomass makes it difficult for the biomass to be hydrolyzed or digested during fermentation. Thus, effective biomass pretreatment is vital. The present review shows that chemical pretreatment is the current preferred method to obtain high sugar yields at low cost, with dilute acid and alkaline hydrolysis as the two most reported technologies. Dilute acid favours hydrolysis of the hemicelluloses whereas alkaline hydrolysis targets the lignin fraction. Both methods have merits and demerits, and have been combined with other treatments such as hydrothermal and enzymatic hydrolysis. Further investigation is required to improve the pretreatment processes and to ensure the economic viability of bioconversion.     

Pretreatment of Rice Straw by a Hot-Compressed Water Process for Enzymatic Hydrolysis

Hot-compressed water (HCW) is among several cost-effective pretreatment processes of lignocellulosic biomass for enzymatic hydrolysis. The present work investigated the characteristics of HCW pretreatment of rice straw including sugar production and inhibitor formation in the liquid fraction and enzymatic hydrolysis of pretreated material. Pretreatment was carried out at a temperature ranging from 140 to 240 °C for 10 or 30 min. Soluble oligosaccharides were found to constitute almost all the components of total sugars in the liquid fraction. The maximal production of total glucose at 180 °C and below accounted for 4.4–4.9% of glucan in raw material. Total xylose production peaked at 180 °C, accounting for 43.3% of xylan in raw material for 10-min pretreatment and 29.8% for 30-min pretreatment. The production of acetic acid increased at higher temperatures and longer treatment time, indicating more significant disruption of lignocellulosic structure, and furfural production achieved the maximum (2.8 mg/ml) at 200 °C for both 10-min and 30-min processes. The glucose yield by enzymatic hydrolysis of pretreated rice straw was no less than 85% at 180 °C and above for 30-min pretreatment and at 200 °C and above for 10-min pretreatment. Considering sugar recovery, inhibitor formation, and process severity, it is recommended that a temperature of 180 °C for a time of 30 min can be the most efficient process for HCW pretreatment of rice straw.     

Pretreatment of softwood by acid-catalyzed steam explosion followed by alkali extraction

A process for converting lignocellulosic biomass to ethanol hydrolyzes the hemicellulosic fraction to soluble sugars (i.e., pretreatment), followed by acid- or enzyme-catalyzed hydrolysis of the cellulosic fraction. Enzymatic hydrolysis may be improved by using an alkali to extract a fraction of the lignin from the pretreated material. The removal of the lignin may increase the accessibility of the cellulose to enzymatic attack, and thus improve overall economics of the process, if the alkali-treated material can still be effectively converted to ethanol. Pretreated Douglas fir produced by a sulfuric-acid-catalyzed steam explosion was treated with NaOH, NH₄OH, and lime to extract some of the lignin. The treated material, along with an untreated control sample, was tested by an enzymatic-digestion procedure, and converted to ethanol by simultaneous saccharification and fermentation using a glucose-fermenting yeast. NaOH was most effective at removing lignin (removed 29%), followed by NH4OH and lime. However, the susceptibility of the treated material to enzymatic digestion was lower than the control and decreased with increasing lignin removal. Ethanol production was similar for the control and NaOH-treated material, and lower for NH₄OH- and lime-treated material.     

A technical and economic analysis of acid-catalyzed steam explosion and dilute sulfuric acid pretreatments using wheat straw or aspen wood chips

Lignocellulosic biomass is one of the most plentiful and potentially cheapest feedstocks for ethanol production. The cellulose component can be broken down into glucose by enzymes and then converted to ethanol by yeast. However, hydrolysis of cellulose to glucose is difficult, and some form of pretreatment is necessary to increase the susceptibility of cellulose to enzymatic attack. An analysis has been completed of two pretreatment options, dilute sulfuric acid hydrolysis and sulfur dioxide impregnated steam explosion, for two feedstocks, wheat straw and aspen wood chips. Detailed process flow sheets and material and energy balances were used to generate equipment cost information. A technical and economic analysis compared the two feedstocks for each of the two pretreatments. For the same pretreatment, sugars produced from aspen wood hydrolysis were cheaper because of the higher carbohydrate content of aspen, whereas dilute acid pretreatment is favored over acid-catalyzed steam explosion.     

Surfactant-Assisted Acid Pretreatment of Sugarcane Tops for Bioethanol Production

Sugarcane tops is one of the largest biomass resources in India and in tropical countries such as Brazil in terms of surplus availability. Conversion of this feedstock to ethanol requires pretreatment to make it more accessible for the enzymes used in saccharification. Though several pretreatment regimens have been developed for addressing biomass recalcitrance, very few seem to be promising as an industrial process. A novel hybrid method involving use of mild acid and surfactant was developed which could effectively remove lignin and improve the sugar yield from sugar cane tops. Operational parameters that affect the pretreatment efficiency (measured as yield of sugars) were studied and optimized. Changes in structural properties of the biomass were studied in relation to the pretreatment process using scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier Transform Infrared (FTIR) analysis, and the changes in chemical composition was also monitored. The biomass pretreated with the optimized novel method could yield 0.798?g of reducing sugars per gram of pretreated biomass upon enzymatic hydrolysis.     

Tailoring Wet Explosion Process Parameters for the Pretreatment of Cocksfoot Grass for High Sugar Yields

The pretreatment of lignocellulosic biomass is crucial for efficient subsequent enzymatic hydrolysis and ethanol fermentation. In this study, wet explosion (WEx) pretreatment was applied to cocksfoot grass and pretreatment conditions were tailored for maximizing the sugar yields using response surface methodology. The WEx process parameters studied were temperature (160–210 °C), retention time (5–20 min), and dilute sulfuric acid concentration (0.2–0.5 %). The pretreatment parameter set E, applying 210 °C for 5 min and 0.5 % dilute sulfuric acid, was found most suitable for achieving a high glucose release with low formation of by-products. Under these conditions, the cellulose and hemicellulose sugar recovery was 94 % and 70 %, respectively. The efficiency of the enzymatic hydrolysis of cellulose under these conditions was 91 %. On the other hand, the release of pentose sugars was higher when applying less severe pretreatment conditions C (160 °C, 5 min, 0.2 % dilute sulfuric acid). Therefore, the choice of the most suitable pretreatment conditions is depending on the main target product, i.e., hexose or pentose sugars.     

Kinetics of Lime Pretreatment of Sugarcane Bagasse to Enhance Enzymatic Hydrolysis

The objective of this work was to determine the optimum conditions of sugarcane bagasse pretreatment with lime to increase the enzymatic hydrolysis of the polysaccharide component and to study the delignification kinetics. The first stage was an evaluation of the influence of temperature, reaction time, and lime concentration in the pretreatment performance measured as glucose release after hydrolysis using a 2³ central composite design and response surface methodology. The maximum glucose yield was 228.45 mg/g raw biomass, corresponding to 409.9 mg/g raw biomass of total reducing sugars, with the pretreatment performed at 90°C, for 90 h, and with a lime loading of 0.4 g/g dry biomass. The enzymes loading was 5.0 FPU/dry pretreated biomass of cellulase and 1.0 CBU/dry pretreated biomass of β-glucosidase. Kinetic data of the pretreatment were evaluated at different temperatures (60°C, 70°C, 80°C, and 90°C), and a kinetic model for bagasse delignification with lime as a function of temperature was determined. Bagasse composition (cellulose, hemicellulose, and lignin) was measured, and the study has shown that 50% of the original material was solubilized, lignin and hemicellulose were selectively removed, but cellulose was not affected by lime pretreatment in mild temperatures (60–90°C). The delignification was highly dependent on temperature and duration of pretreatment.     

Pretreatment of alfalfa stems by wood decay fungus <Emphasis Type="Italic">Perenniporia meridionalis</Emphasis> improves cellulose degradation and minimizes the use of chemicals

Enzymes of wood decay fungi can be exploited to degrade lignocellulosic wastes for sustainable production of bioethanol. Perenniporia meridionalis was tested for growing at different temperatures on stems of alfalfa. The process aims to produce fermentable sugars and can be divided into the following steps: (1) fungal treatment to degrade lignin, (2) microwave pretreatment in water or in phosphoric acid, and (3) enzymatic hydrolysis of cell wall carbohydrates. Thermogravimetric analysis assessed the biomass content of cellulose and lignin after the fungal treatment. Throughout all steps HPLC analysis of sugars, oligomers and by-products (furfural, hydroxymethylfurfural and acids) was performed. Scanning electron microscopy was used for visual inspection and characterization of the experimental material during the treatments. The P. meridionalis pretreatment enhanced the yield of fermentable sugars obtainable by enzymatic hydrolysis in samples subjected to microwave-assisted pretreatment in water, but not in those in acid medium. This is probably related to the very selective removal of lignin by P. meridionalis, exposing cellulose fibers without depleting them. Furthermore, microwave treatment in water produced less byproducts than in acid medium. By exploiting the P. meridionalis lignin degradation is therefore possible to avoid H₃PO₄ use during the alfalfa stem pre-treatment, reducing economic and environmental impacts.     

Dilute Acid Pretreatment of Black Spruce Using Continuous Steam Explosion System

The pretreatment of lignocellulosic materials prior to the enzymatic hydrolysis is essential to the sugar yield and bioethanol production. Dilute acid hydrolysis of black spruce softwood chip was performed in a continuous high temperature reactor followed with steam explosion and mechanical refining. The acid-soaked wood chips were pretreated under different feeding rates (60 and 92 kg/h), cooking screw rotation speeds (7.2 and 14.4 rpm), and steam pressures (12 and 15 bar). The enzymatic hydrolysis was carried out on the acid-insoluble fraction of pretreated material. At lower feeding rate, the pretreatment at low steam pressure and short retention time favored the recovery of hemicellulose. The pretreatment at high steam pressure and longer retention time recovered less hemicellulose but improved the enzymatic accessibility. As a result, the overall sugar yields became similar no matter what levels of the retention time or steam pressure. Comparing with lower feeding rate, higher feeding rate resulted in consistently higher glucose yield in both liquid fraction after pretreatment and that released after enzymatic hydrolysis.     

The Effect of Alkaline Addition in Hydrothermal Pretreatment of Empty Fruit Bunches on Enzymatic Hydrolysis Efficiencies

In general, lignocellulosic biomass contains three major components, namely lignin, hemicellulose and cellulose which are the polymers of C5 and C6 sugars. Thus, there is potential to utilize of this biomass for bioethanol production. The hydrolysis of cellulose into glucose was difficult due to the more fibrous nature and thus inhibit enzyme penetration into the cellulose. In order to solve this problem, hydrothermal pretreatment can be used for breaking the bonds within the lignin structure and increase the accessibility of enzyme into the cellulose. In this study, the effect of chemical addition, sodium hydroxide (NaOH) and calcium oxide (CaO) in hydrothermal pretreatment at 180 °C and 30 minutes reaction time of palm oil empty fruit bunches (EFB) on the enzymatic hydrolysis efficiencies was investigated. The enzymatic hydrolysis of hydrothermally pretreated EFB give the highest concentration of glucose at 0.67 g/L while the hydrothermally pretreated of EFB in the presence of NaOH gives the lowest glucose concentration 0.45 g/L.     

Kinetic Study on the Pretreatment and Enzymatic Saccharification of Rice Hull for the Production of Fermentable Sugars

The production of fermentable sugars from rice hull was studied by dilute acid pretreatment and enzymatic saccharification. Rice hull (15%, w/v) was pretreated by 1% (v/v) sulfuric acid at high temperature (120∼160 °C) for 15, 30, 45, and 60 min, respectively. The maximum sugar concentration from rice hull in the prehydrolysate was obtained at 140 °C for 30 min, but the enzymatic saccharification yield from the corresponding pretreated rice hull is not high. To another aspect, the maximum enzymatic saccharification yield was achieved at 160 °C for 60 min, while the recovery of fermentable sugars was the poorest. To take account of fermentable sugars from pretreatment and enzymatic saccharification, the maximum yield of sugars was obtained only when rice hull was treated at 140 °C for 30 min. Under this condition, 72.5% (w/w) of all sugars generated from the raw material can be recovered. The kinetic study on the enzymatic saccharification of dilute acid pretreated rice hull was also performed in this work by a modified Michaelis–Menten model and a diffusion-limited model. After calculation by a linear and a non-linear regression analysis, both models showed good relation with the experimental results.     

Evaluation and Optimization of Organic Acid Pretreatment of Cotton Gin Waste for Enzymatic Hydrolysis and Bioethanol Production

This paper investigates the efficiency of the organic acids on the pretreatment of an industrially generated cotton gin waste for the removal of lignin, thereby releasing cellulose and hemicellulose as fermentable sugar components. Cotton gin waste was pretreated with various organic acids namely lactic acid, oxalic acid, citric acid, and maleic acid. Among these, maleic acid was found to be the most efficient producing maximum xylose sugar (126.05?±?0.74 g/g) at the optimum pretreatment condition of 150 °C, 500 mM, and 45 min. The pretreatment efficiency was comparable to the conventional dilute sulfuric acid pretreatment. A lignin removal of 88% was achieved by treating maleic acid pretreated biomass in a mixture of sodium sulfite and sodium chlorite. The pretreated biomass was further evaluated for the release of sugar by enzymatic hydrolysis and subsequently bioethanol production from hydrolysates. The maximum 686.13 g/g saccharification yield was achieved with maleic acid pretreated biomass which was slightly higher than the sulfuric acid (675.26 g/g) pretreated waste. The fermentation of mixed hydrolysates(41.75 g/l) produced 18.74 g/l bioethanol concentration with 2.25 g/l/h ethanol productivity and 0.48 g/g ethanol yield using sequential use of Saccharomyces cerevisiae and Pichia stipitis yeast strains. The production of bioethanol was higher than the ethanol produced using co-culture in comparison to sequential culture. Thus, it has been demonstrated that the maleic acid pretreatment and fermentation using sequential use of yeast strains are efficient for bioethanol production from cotton gin waste.     

Initial design of a dilute sulfuric acid pretreatment process for aspen wood chips

A preliminary process design for dilute sulfuric acid pretreatment of aspen wood chips in order to obtain fermentable sugars has been prepared and subjected to an economic evaluation. The process design was prepared according to experimental data on the kinetics of dilute sulfuric acid prehydrolysis and particle size effects obtained in this study and our previous work. The initial economic evaluation shows woodchips are 56% of the cost of production, whereas the reactor is only 4%, and the comminution operation is just under 10%, indicating that the process economics are extremely vulnerable to feedstock costs and are thus yield-sensitive. Although chances for major cost improvements by modification of the reactor design and finding alternatives to dry milling of aspen chips to small (20–80 mesh) particles needed for acid penetration and enzymatic saccharification are not great, design improvements of the process will necessitate development of a cheaper acid resistant pretreatment reactor and a less energy intensive comminution system. Experimental results on effects of particle size on the dilute acid pretreatment design are presented.     

Soaking Pretreatment of Corn Stover for Bioethanol Production Followed by Anaerobic Digestion Process

The production of ethanol and methane from corn stover (CS) was investigated in a biorefinery process. Initially, a novel soaking pretreatment (NaOH and aqueous-ammonia) for CS was developed to remove lignin, swell the biomass, and improve enzymatic digestibility. Based on the sugar yield during enzymatic hydrolysis, the optimal pretreatment conditions were 1?% NaOH?+?8?% NH₄OH, 50°C, 48?h, with a solid-to-liquid ratio 1:10. The results demonstrated that soaking pretreatment removed 63.6?% lignin while reserving most of the carbohydrates. After enzymatic hydrolysis, the yields of glucose and xylose were 78.5?% and 69.3?%, respectively. The simultaneous saccharification and fermentation of pretreated CS using Pichia stipitis resulted in an ethanol concentration of 36.1?g/L, corresponding only to 63.3?% of the theoretical maximum. In order to simplify the process and reduce the capital cost, the liquid fraction of the pretreatment was used to re-soak new CS. For methane production, the re-soaked CS and the residues of SSF were anaerobically digested for 120?days. Fifteen grams CS were converted to 1.9?g of ethanol and 1337.3?mL of methane in the entire process.     

Oxidative lime pretreatment of high-lignin biomass

Lime (Ca[OH]₂) and oxygen (O₂) were used to enhance the enzymatic digestibility of two kinds of high-lignin biomass: poplar wood and newspaper. The recommended pretreatment conditions for poplar wood are 150°C, 6 h, 0.1 g of Ca(OH)₂/g of dry biomass, 9 mL of water/g of dry biomass, 14.0 bar absolute oxygen, and a particle size of −10 mesh. Under these conditions, the 3-d reducing sugar yield of poplar wood using a cellulase loading of 5 filter paper units (FPU)/g of raw dry biomass increased from 62 to 565 mg of eq. glucose/g of raw dry biomass, and the 3-d total sugar (glucose + xylose) conversion increased from 6 to 77% of raw total sugars. At high cellulase loadings (e.g., 75 FPU/g of raw dry biomass), the 3-d total sugar conversion reached 97%. In a trial run with newspaper, using conditions of 140°C, 3 h, 0.3 g of Ca(OH)₂/g of dry biomass, 16 mL of water/g of dry biomass, and 7.1 bar absolute oxygen, the 3-d reducing sugar yield using a cellulase loading of 5 FPU/g of raw dry biomass increased from 240 to 565 mg of eq. glucose/g of raw dry biomass. A material balance study on poplar wood shows that oxidative lime pretreatment solubilized 38% of total biomass, including 78% of lignin and 49% of xylan; no glucan was removed. Ash increased because calcium was incorporated into biomass during the pretreatment. After oxidative lime pretreatment, about 21% of added lime could be recovered by CO₂ carbonation.     

Enhancing the enzymatic hydrolysis of cellulosic materials using simultaneous ball milling

One of the limiting factors restricting the effective and efficient bioconversion of softwood-derived lignocellulosic residues is the recalcitrance of the substrate following pretreatment. Consequently, the ensuing enzymatic process requires relatively high enzyme loadings to produce monomeric carbohydrates that are readily fermentable by ethanologenic microorganisms. In an attempt to circumvent the need for larger enzyme loadings, a simultaneous physical and enzymatic hydrolysis treatment was evaluated. A ball-mill reactor was used as the digestion vessel, and the extent and rate of hydrolysis were monitored. Concurrently, enzyme adsorption profiles and the rate of conversion during the course of hydrolysis were monitored. α-Cellulose, employed as a model substrate, and SO₂-impregnated steam-exploded Douglas-fir wood chips were assessed as the cellulosic substrates. The softwood-derived substrate was further posttreated with water and hot alkaline hydrogen peroxide to remove >90% of the original lignin. Experiments at different reaction conditions were evaluated, including substrate concentration, enzyme loading, reaction volumes, and number of ball beads employed during mechanical milling. It was apparent that the best conditions for the enzymatic hydrolysis of α-cellulose were attained using a higher number of beads, while the presence of air-liquid interface did not seem to affect the rate of saccharification. Similarly, when employing the lignocellulosic substrate, up to 100% hydrolysis could be achieved with a minimum enzyme loading (10 filter paper units/g of cellulose), at lower substrate concentrations and with a greater number of reaction beads during milling. It was apparent that the combined strategy of simultaneous ball milling and enzymatic hydrolysis could improve the rate of saccharification and/or reduce the enzyme loading required to attain total hydrolysis of the carbohydrate moieties.