From Extended Nanofluidics to an Autonomous Solar-Light-Driven Micro Fuel-Cell Device

Autonomous micro/nano mechanical, chemical, and biomedical sensors require persistent power sources scaled to their size. Realization of autonomous micro-power sources is a challenging task, as it requires combination of wireless energy supply, conversion, storage, and delivery to the sensor. Herein, we realized a solar-light-driven power source that consists of a micro fuel cell (μFC) and a photocatalytic micro fuel generator (μFG) integrated on a single microfluidic chip. The μFG produces hydrogen by photocatalytic water splitting under solar light. The hydrogen fuel is then consumed by the μFC to generate electricity. Importantly, the by-product water returns back to the photocatalytic μFG via recirculation loop without losses. Both devices rely on novel phenomena in extended-nano-fluidic channels that ensure ultra-fast proton transport. As a proof of concept, we demonstrate that μFG/μFC source achieves remarkable energy density of ca. 17.2 mWh cm⁻² at room temperature.     

A [001]‐Oriented Hittorf's Phosphorus Nanorods/Polymeric Carbon Nitride Heterostructure for Boosting Wide‐Spectrum‐Responsive Photocatalytic Hydrogen Evolution from Pure Water

Red phosphorus is a promising photocatalyst with wide visible‐light absorption up to 700 nm, but the fast charge recombination limits its photocatalytic hydrogen evolution reaction (HER) activity. Now, [001]‐oriented Hittorf's phosphorus (HP) nanorods were successfully grown on polymeric carbon nitride (PCN) by a chemical vapor deposition strategy. Compared with the bare PCN and HP, the optimized PCN@HP hybrid exhibited a significantly enhanced photocatalytic activity, with HER rates reaching 33.2 and 17.5 μmol h^?1 from pure water under simulated solar light and visible light irradiation, respectively. It was theoretically and experimentally indicated that the strong electronic coupling between PCN and [001]‐oriented HP nanorods gave rise to the enhanced visible light absorption and the greatly accelerated photoinduced electron–hole separation and transfer, which benefited the photocatalytic HER performance.     

Water‐Splitting Catalysis and Solar Fuel Devices: Artificial Leaves on the Move

The development of new energy materials that can be utilized to make renewable and clean fuels from abundant and easily accessible resources is among the most challenging and demanding tasks in science today. Solar‐powered catalytic water‐splitting processes can be exploited as a source of electrons and protons to make clean renewable fuels, such as hydrogen, and in the sequestration of CO₂ and its conversion into low‐carbon energy carriers. Recently, there have been tremendous efforts to build up a stand‐alone solar‐to‐fuel conversion device, the “artificial leaf”, using light and water as raw materials. An overview of the recent progress in electrochemical and photo‐electrocatalytic water splitting devices is presented, using both molecular water oxidation complexes (WOCs) and nano‐structured assemblies to develop an artificial photosynthetic system.     

Noble‐Metal‐Free Janus‐like Structures by Cation Exchange for Z‐Scheme Photocatalytic Water Splitting under Broadband Light Irradiation

Z‐scheme water splitting is a promising approach based on high‐performance photocatalysis by harvesting broadband solar energy. Its efficiency depends on the well‐defined interfaces between two semiconductors for the charge kinetics and their exposed surfaces for chemical reactions. Herein, we report a facile cation‐exchange approach to obtain compounds with both properties without the need for noble metals by forming Janus‐like structures consisting of γ‐MnS and Cu₇S₄ with high‐quality interfaces. The Janus‐like γ‐MnS/Cu₇S₄ structures displayed dramatically enhanced photocatalytic hydrogen production rates of up to 718 μmol g⁻¹ h⁻¹ under full‐spectrum irradiation. Upon further integration with an MnO_x oxygen‐evolution cocatalyst, overall water splitting was accomplished with the Janus structures. This work provides insight into the surface and interface design of hybrid photocatalysts, and offers a noble‐metal‐free approach to broadband photocatalytic hydrogen production.     

In‐situ Platinum Plasmon Resonance Effect Prompt Titanium Dioxide Nanocube Photocatalytic Hydrogen Evolution

Herein, Pt‐decorated TiO₂ nanocube hierarchy structure (Pt‐TNCB) was fabricated by a facile solvothermal synthesis and in‐situ photodeposition strategy. The Pt‐TNCB exhibits an excellent solar‐driven photocatalytic hydrogen evolution rate (337.84 μmol h^?1), which is about 37 times higher than that of TNCB (9.19 μmol h^?1). Interestingly, its photocatalytic property is still superior to TNCB with post modification Pt (1 wt %) (208.11 μmol h^?1). The introduction of Pt efficiently extends the photoresponse of the composite material from UV to visible light region, simultaneously boosting their solar‐driven photocatalytic performance, which attribute to the porous structure, the sub size TNCB, the SPR effect of Pt NPs and strong interaction of two components. In fact, Pt NPs can enhance collective oscillations on delocalized electrons, which is conducive to capture electrons and hinder the recombination of photogenerated electron‐hole pairs, leading to the longer lifetime of photogenerated charges. The fabrication of Pt‐TNCB photocatalyst with SPR effect may provide a promising method to improve visible‐light photocatalytic activities for traditional photocatalysts.     

A Hydrogen‐Deficient Nickel–Cobalt Double Hydroxide for Photocatalytic Overall Water Splitting

Developing highly efficient and low‐cost photocatalysts for overall water splitting has long been a pursuit for converting solar power into clean hydrogen energy. Herein, we demonstrate that a nonstoichiometric nickel–cobalt double hydroxide can achieve overall water splitting by itself upon solar light irradiation, avoiding the consumption of noble‐metal co‐catalysts. We employed an intensive laser to ablate a NiCo alloy target immersed in alkaline solution, and produced so‐called L‐NiCo nanosheets with a nonstoichiometric composition and O^2?/Co³⁺ ions exposed on the surface. The nonstoichiometric composition broadens the band gap, while O^2? and Co³⁺ ions boost hydrogen and oxygen evolution, respectively. As such, the photocatalyst achieves a H₂ evolution rate of 1.7 μmol h^?1 under AM 1.5G sunlight irradiation and an apparent quantum yield (AQE) of 1.38 % at 380 nm.     

Round‐the‐Clock Photocatalytic Hydrogen Production with High Efficiency by a Long‐Afterglow Material

Long afterglow materials can store and release light energy after illumination. A brick‐like, micrometer‐sized Sr₂MgSi₂O₇:Eu²⁺,Dy³⁺ long‐afterglow material is used for hydrogen production by the photocatalytic reforming of methanol under round‐the‐clock conditions for the first time, achieving a solar‐to‐hydrogen (STH) conversion efficiency of 5.18 %. This material is one of the most efficient photocatalysts and provides the possibility of practical use on a large scale. Its remarkable photocatalytic activity is attributed to its unique carrier migration path and large number of lattice defects. These findings expand the application scope of long afterglow materials and provide a new strategy to design efficient photocatalysts by constructing trap levels that can prolong carrier lifetimes.     

A Pd/C‐CeO2 Anode Catalyst for High‐Performance Platinum‐Free Anion Exchange Membrane Fuel Cells

One of the biggest obstacles to the dissemination of fuel cells is their cost, a large part of which is due to platinum (Pt) electrocatalysts. Complete removal of Pt is a difficult if not impossible task for proton exchange membrane fuel cells (PEM‐FCs). The anion exchange membrane fuel cell (AEM‐FC) has long been proposed as a solution as non‐Pt metals may be employed. Despite this, few examples of Pt‐free AEM‐FCs have been demonstrated with modest power output. The main obstacle preventing the realization of a high power density Pt‐free AEM‐FC is sluggish hydrogen oxidation (HOR) kinetics of the anode catalyst. Here we describe a Pt‐free AEM‐FC that employs a mixed carbon‐CeO₂ supported palladium (Pd) anode catalyst that exhibits enhanced kinetics for the HOR. AEM‐FC tests run on dry H₂ and pure air show peak power densities of more than 500 mW cm^?2.     

Optimizing electronic structure and charge transport of sulfur/potassium co‐doped graphitic carbon nitride with efficient photocatalytic hydrogen evolution performance

Recently, graphitic carbon nitride (CN) has been widely investigated for solar energy conversion through water splitting, but its low photocatalytic activity needs to be further improved and optimized. Herein, S/K co‐doped CN photocatalysts have been fabricated by condensation of thiourea and dithiooxamide followed by post‐treatment in molten salt. As evidenced by XRD patterns and UV–vis DRS plots, the engineering crystalline and electronic structure of all as‐prepared samples have been explored through tailoring the mass ratio of thiourea and dithiooxamide as well as ratio of molten salt/the precursor. After optimization, the as‐prepared S/K co‐doped CN photocatalysts with needle‐like nanorods structure exhibit excellent hydrogen evolution rate of 1962.10 μmol^?1 g^?1 h^?1. While its photocatalytic activity is lower than that of pure CN by molten salt treatment (K‐doped CN) (2066.40 μmol^?1 g^?1 h^?1), which results from that the K content of S/K co‐doped CN photocatalyst is lower than that of K‐doped CN. Moreover, compared with K‐doped CN, S/K co‐doped CN photocatalyst possesses higher photocatalytic performance when irradiated by a light source (λ > 520 nm). This might be ascribed to the fact that the introduction of sulfur can expand light absorption region (λ > 520 nm), whereas K cannot improve light absorption of CN in this wavelength region. Furthermore, DFT calculation reveals that both S and K atoms can offer more electrons to band gap, leading to the formation of metallic‐character band structure. In addition, K atom can intercalate in the interlayer of CN and bridge the adjacent two layers, leading to the formation of charge delivery channels. These results demonstrate that S/K co‐doped CN photocatalysts facilitate the separation and transport of photogenerated charge carries, resulting in the efficient photocatalytic activity for hydrogen evolution. Besides, a competition between sulfur and potassium atom during the synthesis process is also discussed in details.     

Consecutive Charging of a Perylene Bisimide Dye by Multistep Low‐Energy Solar‐Light‐Induced Electron Transfer Towards H2 Evolution

A photocatalytic system containing a perylene bisimide (PBI) dye as a photosensitizer anchored to titanium dioxide (TiO₂) nanoparticles through carboxyl groups was constructed. Under solar‐light irradiation in the presence of sacrificial triethanolamine (TEOA) in neutral and basic conditions (pH 8.5), a reaction cascade is initiated in which the PBI molecule first absorbs green light, giving the formation of a stable radical anion (PBI^.?), which in a second step absorbs near‐infrared light, forming a stable PBI dianion (PBI^2?). Finally, the dianion absorbs red light and injects an electron into the TiO₂ nanoparticle that is coated with platinum co‐catalyst for hydrogen evolution. The hydrogen evolution rates (HERs) are as high as 1216 and 1022 μmol h^?1 g^?1 with simulated sunlight irradiation in neutral and basic conditions, respectively.     

Enhanced Photoexcited Carrier Separation in Oxygen‐Doped ZnIn2S4 Nanosheets for Hydrogen Evolution

Limited by the relatively sluggish charge‐carrier separation in semiconductors, the photocatalytic performance is still far below what is expected. Herein, a model of ZnIn₂S₄ (ZIS) nanosheets with oxygen doping is put forward to obtain in‐depth understanding of the role that doping atoms play in photocatalysis. It shows enhanced photocatalytic activity compared with pristine ZIS. The electron dynamics analyzed by ultrafast transient absorption spectroscopy reveals that the average recovery lifetime of photoexcited electrons is increased by 1.53 times upon oxygen incorporation into the ZIS crystals, indicating enhanced separation of photoexcited carriers in oxygen‐doped ZIS nanosheets. As expected, the oxygen‐doped ZIS nanosheets show a remarkably improved photocatalytic activity with a hydrogen evolution rate of up to 2120 μmol h^?1 g^?1 under visible‐light irradiation, which is 4.5 times higher than that of the pristine ZIS nanosheets.     

Strong‐Base‐Assisted Synthesis of a Crystalline Covalent Triazine Framework with High Hydrophilicity via Benzylamine Monomer for Photocatalytic Water Splitting

Methods to synthesize crystalline covalent triazine frameworks (CTFs) are limited and little attention has been paid to development of hydrophilic CTFs and photocatalytic overall water splitting. A route to synthesize crystalline and hydrophilic CTF‐HUST‐A1 with a benzylamine‐functionalized monomer is presented. The base reagent used plays an important role in the enhancement of crystallinity and hydrophilicity. CTF‐HUST‐A1 exhibits good crystallinity, excellent hydrophilicity, and excellent photocatalytic activity in sacrificial photocatalytic hydrogen evolution (hydrogen evolution rate up to 9200 μmol g^?1 h^?1). Photocatalytic overall water splitting is achieved by depositing dual co‐catalysts in CTF‐HUST‐A1, with H₂ evolution and O₂ evolution rates of 25.4 μmol g^?1 h^?1 and 12.9 μmol g^?1 h^?1 in pure water without using sacrificial agent.     

Visible‐Light‐Responsive Photoanodes for Highly Active,Stable Water Oxidation

Solar energy is a natural and effectively permanent resource and so the conversion of solar radiation into chemical or electrical energy is an attractive, although challenging, prospect. Photo‐electrochemical (PEC) water splitting is a key aspect of producing hydrogen from solar power. However, practical water oxidation over photoanodes (in combination with water reduction at a photocathode) in PEC cells is currently difficult to achieve because of the large overpotentials in the reaction kinetics and the inefficient photoactivity of the semiconductors. The development of semiconductors that allow high solar‐to‐hydrogen conversion efficiencies and the utilization of these materials in photoanodes will be a necessary aspect of achieving efficient, stable water oxidation. This Review discusses advances in water oxidation activity over photoanodes of n‐type visible‐light‐responsive (oxy)nitrides and oxides.     

Highly Efficient Photocatalytic H2 Evolution from Water using Visible Light and Structure‐Controlled Graphitic Carbon Nitride

The major challenge of photocatalytic water splitting, the prototypical reaction for the direct production of hydrogen by using solar energy, is to develop low‐cost yet highly efficient and stable semiconductor photocatalysts. Herein, an effective strategy for synthesizing extremely active graphitic carbon nitride (g‐C₃N₄) from a low‐cost precursor, urea, is reported. The g‐C₃N₄ exhibits an extraordinary hydrogen‐evolution rate (ca. 20 000 μmol h^?1 g^?1 under full arc), which leads to a high turnover number (TON) of over 641 after 6 h. The reaction proceeds for more than 30 h without activity loss and results in an internal quantum yield of 26.5 % under visible light, which is nearly an order of magnitude higher than that observed for any other existing g‐C₃N₄ photocatalysts. Furthermore, it was found by experimental analysis and DFT calculations that as the degree of polymerization increases and the proton concentration decreases, the hydrogen‐evolution rate is significantly enhanced.     

Emerging materials for plasmon-assisted photoelectrochemical water splitting

Energy production and environmental pollution are the two major problems the world is facing today. The depletion of fossil fuels and the emission of harmful gases into the atmosphere leads to the research on clean and renewable energy sources. In this context, hydrogen is considered an ideal fuel to meet global energy needs. Presently, hydrogen is produced from fossil fuels. However, the most desirable way is from clean and renewable energy sources, like water and sunlight. Sunlight is an abundant energy source for energy harvesting and utilization. Recent studies reveal that photoelectrochemical (PEC) water splitting has promise for solar to hydrogen (STH) conversion over the widely tested photocatalytic approach since hydrogen and oxygen gases can be quantified easily in PEC. For designing light-absorbing materials, semiconductors are the primary choice that undergoes excitation upon solar light irradiation to produce excitons (electron-hole pairs) to drive the electrolysis. Visible light active semiconductors are attractive to achieve high solar to chemical fuel conversion. However, pure semiconductor materials are far from practical applications because of charge carrier recombination, poor light-harvesting, and electrode degradation. Various heteronanostructures by the integration of metal plasmons overcome these issues. The incorporation of metal plasmons gained significance for improving the PEC water splitting performance. This review summarizes the possible main mechanisms such as plasmon-induced resonance energy transfer (PIRET), hot electron injection (HEI), and light scatting/trapping. It also deliberates the rational design of plasmonic structures for PEC water splitting. Furthermore, this review highlights the advantages of plasmonic metal-supported photoelectrodes for PEC water splitting.     

Production of Hydrogen by Glycerol Photoreforming Using Binary Nitrogen–Metal‐Promoted N‐M‐TiO2 Photocatalysts

The need for renewable energy focuses attention on hydrogen obtained by using sustainable and green methods. The sustainable compound glycerol can be used for hydrogen production by heterogeneous photocatalysis. A novel approach involves the promotion of the TiO₂ photocatalyst with a binary combination of nitrogen and transition metal. We report the synthesis and spectroscopic characterization of the new N‐M‐TiO₂ photocatalysts (M=none, Cr, Co, Ni, Cu), and the photocatalytic reforming of glycerol to hydrogen under ambient conditions and near‐UV or visible light versus benchmark P25 TiO₂. In units of activity μmol m^?2 h^?1, N‐Ni‐TiO₂ is five‐fold more active than P25, and N‐Cu‐TiO₂ is 44‐fold more active. The photocatalytic activity of N‐M‐TiO₂ increases from Cr to Co and Ni, whereas the photoluminescence decreases; the change in activity is due to the modulation of charge recombination.     

A Multiple Structure‐Design Strategy towards Ultrathin Niobate Perovskite Nanosheets with Thickness‐Dependent Photocatalytic Hydrogen‐Evolution Performance

Hydrogen production by catalytic water splitting using sunlight holds great promise for clean and sustainable energy source. Despite the efforts made in the past decades, challenges still exist in pursuing solid catalysts with light‐harvesting capacity, large surface areas and efficient utilities of the photogenerated carrier, at the same time. Here, a multiple structure design strategy leading to highly enhanced photocatalytic performance on hydrogen production from water splitting in Dion–Jacobson perovskites KCa₂Na_{n ‐3}Nb_n O_{3n +1} is described. Specifically, chemical doping (N/Nb⁴⁺) of the parent oxides via ammoniation improved the ability of sunlight harvesting efficiently; subsequent liquid exfoliation of the doped perovskites yielded ultrathin [Ca₂Na_{n ‐3}Nb_n O_{3n +1}]⁻ nanosheets with greatly increased surface areas. Significantly, the maximum hydrogen evolution appears in the n =4 nanosheets, which suggests the most favorable thickness for charge separation in such perovskite‐type catalysts. The optimized black N/Nb⁴⁺‐[Ca₂NaNb₄O₁₃]⁻ nanosheets show greatly enhanced photocatalytic performance, as high as 973 μmol h⁻¹ with Pt loading, on hydrogen evolution from water splitting. As a proof‐of‐concept, this work highlights the feasibility of combining various chemical strategies towards better catalysts and precise thickness control of two‐dimensional materials.     

Carbon‐Electrode‐Tailored All‐Inorganic Perovskite Solar Cells To Harvest Solar and Water‐Vapor Energy

Moisture is the worst enemy for state‐of‐the‐art perovskite solar cells (PSCs). However, the flowing water vapor within nanoporous carbonaceous materials can create potentials. Therefore, it is a challenge to integrate water vapor and solar energies into a single PSC device. We demonstrate herein all‐inorganic cesium lead bromide (CsPbBr₃) solar cells tailored with carbon electrodes to simultaneously harvest solar and water‐vapor energy. Upon interfacial modification and plasma treatment, the bifunctional PSCs yield a maximum power conversion efficiency up to 9.43 % under one sun irradiation according to photoelectric conversion principle and a power output of 0.158 μW with voltage of 0.35 V and current of 0.45 μA in 80 % relative humidity through the flowing potentials at the carbon/water interface. The initial efficiency is only reduced by 2 % on exposing the inorganic PSC with 80 % humidity over 40 days. The successful realization of physical proof‐of‐concept multi‐energy integrated solar cells provides new opportunities of maximizing overall power output.     

Prolonged Hot Electron Dynamics in Plasmonic‐Metal/Semiconductor Heterostructures with Implications for Solar Photocatalysis

Ideal solar‐to‐fuel photocatalysts must effectively harvest sunlight to generate significant quantities of long‐lived charge carriers necessary for chemical reactions. Here we demonstrate the merits of augmenting traditional photoelectrochemical cells with plasmonic nanoparticles to satisfy these daunting photocatalytic requirements. Electrochemical techniques were employed to elucidate the mechanics of plasmon‐mediated electron transfer within Au/TiO₂ heterostructures under visible‐light (λ>515 nm) irradiation in solution. Significantly, we discovered that these transferred electrons displayed excited‐state lifetimes two orders of magnitude longer than those of electrons photogenerated directly within TiO₂ via UV excitation. These long‐lived electrons further enable visible‐light‐driven H₂ evolution from water, heralding a new photocatalytic paradigm for solar energy conversion.     

Energy Transfer in a Hybrid IrIII Carbene–PtII Acetylide Assembly for Efficient Hydrogen Production

A new heterometallic supramolecular complex, consisting of an iridium carbene‐based unit appended to a platinum terpyridine acetylide unit, representing a new Ir^III–Pt^II structural motif, was designed and developed to act as an active species for photocatalytic hydrogen production. The results also suggested that a light‐harvesting process is essential to realize the solar‐to‐fuel conversion in an artificial system as illustrated in the natural photosynthetic system.