A Versatile Ligand Platform for Palladium‐ and Nickel‐Catalyzed Ethylene Copolymerization with Polar Monomers

The ability to carry out transition‐metal‐catalyzed copolymerizations of olefins with polar monomers is a great challenge in the field of olefin polymerization. Palladium has been the dominant player in this field, while its low‐cost nickel counterpart has only achieved very limited success. We report the synthesis and evaluation of a highly versatile platform based on diphosphazane monoxide ligands. Both palladium and nickel catalysts bearing these ligands mediate the copolymerization of ethylene with a number of fundamental polar monomers.     

Norbornene/n‐Butyl methacrylate copolymerization over α‐Diimine nickel and palladium catalysts supported on multiwalled carbon nanotubes

The covalently immobilized multiwalled carbon nanotubes (MWNTs) supported three‐dimensional geometry α‐diimine nickel, palladium catalysts are prepared by corresponding α‐diimine nickel, palladium complexes and activated MWNTs. The molecular structures of the catalysts have been confirmed by X‐ray single‐crystal analyses, NMR and XPS, as well as elemental analysis. Compared with nickel, palladium catalysts without modification and physical mixing of nickel, palladium catalysts with MWNTs, the MWNTs supported nickel, palladium catalysts show improved activity and productivity in norbornene homopolymerization and copolymerization with polar monomer. The morphology of the resulting polymers obtained from MWNTs‐supported nickel(II) complex reveals that the MWNTs are dispersed uniformly in polymer and wrapped by polymers to squeeze out of spherical particles, leading to the enhanced processability and mechanical properties. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3213–3220     

Influence of Polyethylene Glycol Unit on Palladium‐ and Nickel‐Catalyzed Ethylene Polymerization and Copolymerization

The transition‐metal‐catalyzed copolymerization of olefins with polar functionalized co‐monomers represents a major challenge in the field of olefin polymerization. It is extremely difficult to simultaneously achieve improvements in catalytic activity, polar monomer incorporation, and copolymer molecular weight through ligand modifications. Herein we introduce a polyethylene glycol unit to some phosphine‐sulfonate palladium and nickel catalysts, and its influence on ethylene polymerization and copolymerization is investigated. In ethylene polymerization, this strategy leads to enhanced activity, catalyst stability, and increased polyethylene molecular weight. In ethylene copolymerization with polar monomers, improvements in all copolymerization parameters are realized. This effect is most significant for polar monomers with hydrogen‐bond‐donating abilities.     

Mizoroki–Heck and Suzuki–Miyaura reactions mediated by poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid)‐stabilized magnetically separable palladium catalyst

The purpose of this work was to synthesize and characterize a new magnetic polymer nanosphere‐supported palladium(II) acetate catalyst for reactions requiring harsh conditions. In this regard, an air‐stable, moisture‐stable and highly efficient heterogenized palladium was synthesized by the coordination of palladium(II) acetate with poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid)‐grafted modified magnetic nanoparticles with a core–shell structure. The structure of the newly developed catalyst was characterized using various techniques. The catalytic activity of the resultant nano‐organometallic catalyst was evaluated in Mizoroki–Heck and Suzuki–Miyaura reactions to afford the corresponding coupling products in good to excellent yields. High selectivity as well as outstanding turnover number (14 143, 4900) and turnover frequency (28 296, 7424) values were recorded for the catalyst in Suzuki–Miyaura and Mizoroki–Heck reactions, respectively. Magnetic separation and recycling of the catalyst for at least six runs became possible without any significant loss of efficiency or any detectable palladium leaching.     

The syn/anti‐Dichotomy in the Palladium‐Catalyzed Addition of Nucleophiles to Alkenes

In this review the stereochemistry of palladium‐catalyzed addition of nucleophiles to alkenes is discussed, and examples of these reactions in organic synthesis are given. Most of the reactions discussed involve oxygen and nitrogen nucleophiles; the Wacker oxidation of ethylene has been reviewed in detail. An anti‐hydroxypalladation in the Wacker oxidation has strong support from both experimental and computational studies. From the reviewed material it is clear that anti‐addition of oxygen and nitrogen nucleophiles is strongly favored in intermolecular addition to olefin–palladium complexes even if the nucleophile is coordinated to the metal. On the other hand, syn‐addition is common in the case of intramolecular oxy‐ and amidopalladation as a result of the initial coordination of the internal nucleophile to the metal.     

Emerging Palladium and Nickel Catalysts for Copolymerization of Olefins with Polar Monomers

Transition‐metal‐catalyzed copolymerization of olefins with polar monomers represents a challenge because of the large variety of substrate‐induced side reactions. However, this approach also holds the potential for the direct synthesis of polar functionalized polyolefins with unique properties. After decades of research, only a few catalyst systems have been found to be suitable for this reaction. Some major advances in catalyst development have been made in the past five years. This Minireview summarizes some of the recent progress in the extensively studied Brookhart and Drent catalyst systems, as well as emerging alternative palladium and nickel catalysts.     

Unusual Transformation from a Solvent‐Stabilized 1D Coordination Polymer to a Metal–Organic Framework (MOF)‐Like Cross‐Linked 3D Coordination Polymer

An unusual 1D‐to‐3D transformation of a coordination polymer based on organic linkers containing highly polar push–pull π‐conjugated side chains is reported. The coordination polymers are synthesized from zinc nitrate and an organic linker, namely, 2,5‐bis{4‐[1‐(4‐nitrophenyl)pyrrolidin‐2‐yl]butoxy}terephthalic acid, which possesses highly polar (4‐nitrophenyl)pyrrolidine groups, with high dipole moments of about 7 D. The coordination polymers exhibit an unusual transformation from a soluble, solvent‐stabilized 1D coordination polymer into an insoluble, metal–organic framework (MOF)‐like 3D coordination polymer. The coordination polymer exhibits good film‐forming ability, and the MOF‐like films are insoluble in conventional organic solvents.     

Access to Hydroxy‐Functionalized Polypropylene through Coordination Polymerization

Preparation of polyethylenes containing hydroxy groups has been already industrialized through radical copolymerization under harsh conditions followed by alcoholysis. By contrast, hydroxy‐functionalized polypropylene has proven a rather challenging goal in polymer science. Propylene can't be polymerized through a radical mechanism, and its coordination copolymerization with polar monomers is frustrated by catalyst poisoning. Herein, we report a new strategy to reach this target. The coordination polymerization of allenes by rare‐earth‐metal precursors affords pure 1,2‐regulated polyallenes, which are facilely transformed into poly(allyl alcohol) analogues by subsequent hydroboration/oxidation. Strikingly, the copolymerization of allenes and propylene gives unprecedented hydroxy‐functionalized polypropylene after post‐polymerization modification. Mechanistic elucidation by DFT simulation suggests kinetic rather than thermodynamic control.     

Nickel‐ and palladium‐catalyzed olefin polymerization under high pressures

The polymerization of 1‐hexene under high pressures (100–750 MPa) was investigated with nickel–α‐diimine complex/methylaluminoxane and palladium–α‐diimine complex/methylaluminoxane as catalyst systems. The catalytic activity of both the nickel and palladium complexes monotonously increased as pressure rose and became two to four times higher than that observed at atmospheric pressure. Palladium catalysts gave poly(1‐hexene)s with higher molecular weights under high pressure, whereas nickel‐catalyzed high‐pressure polymerizations gave polymers with higher molecular weights only at rather low monomer concentrations. The living‐like character in the palladium‐catalyzed polymerizations was somewhat enhanced under higher pressures, whereas the nickel‐catalyzed polymerizations under high pressures were not living. More branches were found in the polymers produced by nickel catalysts at higher pressures. The chain‐transfer reaction seemed to be accelerated by the high pressure in the nickel‐catalyzed reactions, although this was not apparent in the palladium‐catalyzed reactions. Dimers formed and were accompanied by high molecular weight polymers when nickel catalysts were used under high pressures and at high monomer concentrations. The possibility that very congested five‐coordinated species act as key intermediates for the dimerization is discussed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 293–302, 2003     

Complexation Kinetics of N‐Alkyl‐Substituted Diamino Diamides with Nickel (II) in Aqueous Solution

Equilibrium constants are deter mined for the protonation and metal complexation of the nickel(II) complexes with 4‐methyl‐4,7‐diazadecanediamide (4‐Me‐L‐2,2,2), 4,7‐dimethyl‐4,7‐diazadecanediamide (4,7‐N,N′‐Me₂‐L‐2,2,2), 4‐ethyl‐4,7‐diazadecanediamide (4‐Et‐L‐2,2,2), and 4‐methyl‐4,8‐ diazaundecane diamide (4‐Me‐L‐2,3,2), in 0.10 M KCl at 25.0°C. The formation kinetics of these nickel (II) complexes have been studied under the same conditions with use of the stopped‐flow technique. The possible path ways for the complexation reaction of nickel (II) with these ligands are discussed. The first metal‐nitrogen bond formation is proposed as the rate‐determining step for the reactions of nickel (II) with the unprotonated ligands; proton loss is the rate‐limiting step in the reactions of nickel (II) with the monoprotonated ligands. Similarly, in dissociation reactions of these nickel (II) complexes, the rate‐determining step for the water dissociation pathway is the break age of the second nickel‐nitrogen bond; the rate‐determining step for the proton‐assisted path way is the protonation of the released amino group. The important factors determining the reactivity of these complexes are considered. The kinetic results of the formation and dissociation reactions of these complexes are consistent with dissociative mechanism.     

Fluorinated α-Diimine Nickel Mediated Ethylene (Co)Polymerization

Fluorine substituents in transition metal catalysts are of great importance in olefin polymerization catalysis; however, the comprehensive effect of fluorine substituents is elusive in seminal late transition metal α-diimine catalytic system. In this contribution, fluorine substituents at various positions (ortho-, meta-, and para-F) and with different numbers (F_n; n=0, 1, 2, 3, 5) were installed into the well-defined N-terphenyl amine and thus were studied for the first time in the nickel α-diimine promoted ethylene polymerization and copolymerization with polar monomers. The position of the fluorine substituent was particularly crucial in these polymerization reactions in terms of catalytic activity, polymer molecular weight, branching density, and incorporation of polar monomer, and thus a picture on the fluorine effect was given. As a notable result, the ortho-F substituted α-diimine nickel catalyst produced highly linear polyethylenes with an extremely high molecular weight (M_w=8703 kDa) and a significantly low degree of branching of 1.4/1000 C; however, the meta-F and/or para-F substituted α-diimine nickel catalysts generated highly branched (up to 80.2/1000 C) polyethylenes with significantly low molecular weights (M_w=20-50 kDa).     

Catechol‐Functionalized Polyolefins

The incorporation of comonomers during ethylene polymerization can efficiently modulate important material properties of the polyolefins. Utilizing bioresourced comonomers for the generation of high‐performance polyolefin materials is attractive from a sustainability point of view. In this contribution, bioresourced eugenol and related comonomers were incorporated into polyolefins through palladium‐catalyzed copolymerization and terpolymerization reactions. Importantly, high‐molecular‐weight catechol‐functionalized polyolefins can be generated. The introduction of different metal ions induces efficient interactions with the incorporated catechol groups, leading to enhanced mechanical properties and self‐healing properties. Moreover, the catechol functionality can greatly improve other properties such as surface properties, adhesion properties, and compatibilizing properties. The catechol‐functionalized polyolefin was demonstrated as a versatile platform polymer for accessing various materials with dramatically different properties.     

新一代高活性后过渡金属烯烃聚合催化剂

介绍了近几年发展起来的新一代后期过渡金属(Fe,Co,Ni,Pd)烯烃聚合催化剂,对催化剂的结构、性能及催化烯烃聚合进行了阐述。     

Highly Stable,Water‐Dispersible Metal‐Nanoparticle‐Decorated Polymer Nanocapsules and Their Catalytic Applications

A facile synthesis of highly stable, water‐dispersible metal‐nanoparticle‐decorated polymer nanocapsules (M@CB‐PNs: M=Pd, Au, and Pt) was achieved by a simple two‐step process employing a polymer nanocapsule (CB‐PN) made of cucurbit[6]uril (CB[6]) and metal salts. The CB‐PN serves as a versatile platform where various metal nanoparticles with a controlled size can be introduced on the surface and stabilized to prepare new water‐dispersible nanostructures useful for many applications. The Pd nanoparticles on CB‐PN exhibit high stability and dispersibility in water as well as excellent catalytic activity and recyclability in carbon–carbon and carbon–nitrogen bond‐forming reactions in aqueous medium suggesting potential applications as a green catalyst.     

Highly Stable,Water‐Dispersible Metal‐Nanoparticle‐Decorated Polymer Nanocapsules and Their Catalytic Applications

A facile synthesis of highly stable, water‐dispersible metal‐nanoparticle‐decorated polymer nanocapsules (M@CB‐PNs: M=Pd, Au, and Pt) was achieved by a simple two‐step process employing a polymer nanocapsule (CB‐PN) made of cucurbit[6]uril (CB[6]) and metal salts. The CB‐PN serves as a versatile platform where various metal nanoparticles with a controlled size can be introduced on the surface and stabilized to prepare new water‐dispersible nanostructures useful for many applications. The Pd nanoparticles on CB‐PN exhibit high stability and dispersibility in water as well as excellent catalytic activity and recyclability in carbon–carbon and carbon–nitrogen bond‐forming reactions in aqueous medium suggesting potential applications as a green catalyst.     

Organometall‐Reaktionen in Wasser

Water has attracted significant attention as an alternative solvent for organometallic reactions because it is nontoxic, nonflammable, and inexpensive, and is easily separated from organic products. Organometallic reactions, like the palladium‐catalyzed couplings of organic halides with organoboron compounds (Suzuki) and organotin reagents (Stille), are among the most widely used reactions for the formation of carbon‐carbon bonds. Owing to the discovery of water‐soluble, sulfonated phosphane derivatives and particularly the design of water‐soluble palladium‐catalysts it was possible to import these reactions into aqueous media. Another efficient, metal‐catalyzed, carbon‐carbon bond‐forming process that is nowadays possible in aqueous media is the olefin metathesis. The approaches so far include the use of water‐soluble ruthenium‐catalysts, surfactants and additives, ultrasonication, the introduction of polar quaternary ammonium groups or the incorporation of PEG as a water solubilizing moiety. The last point bears also a great potential for further developments in the removal of ruthenium‐containing byproducts. Additionally, water is the ideal reaction environment for polar, water soluble substrates such as natural product or pharmaceuticals.     

Highly branched polyethylene graft copolymers prepared by means of migratory insertion polymerization combined with TEMPO‐mediated controlled radical polymerization

New families of highly branched polyethylenes containing alkyl short chain branches as well as polar and non‐polar long‐chain branches were prepared by combining migratory insertion copolymerization with controlled radical graft copolymerization. Key intermediate was a novel alkoxyamine‐functionalized 1‐alkene which was copolymerized with ethylene using a palladium catalyst. The resulting highly branched polyethylene with alkoxyamine‐functionalized short chain branches was used as macroinitiator to initiate controlled radical graft copolymerization of styrene and styrene/acrylonitrile. Novel polyethylene graft copolymers with molecular masses of M_w >100 000 g/mol and narrow polydispersities were obtained. Transmission electron microscopic studies (TEM) and the presence of two glass transition temperatures at –67 and +100°C indicated microphase separation.     

Exploring Coordination Modes: Late Transition Metal Complexes with a Methylene‐bridged Macrocyclic Tetra‐NHC Ligand

A tetranuclear silver(I) N‐heterocyclic carbene (NHC) complex bearing a macrocyclic, exclusively methylene‐bridged, tetracarbene ligand was synthesized and employed as transmetalation agent for the synthesis of nickel(II), palladium(II), platinum(II), and gold(I) derivatives. The transition metal complexes exhibit different coordination geometries, the coinage metals being bound in a linear fashion forming molecular box‐type complexes, whereas the group 10 metals adapt an almost ideal square planar coordination geometry within the ligand's cavity, resulting in saddle‐shaped complexes. Both the Ag^I and the Au^I complexes show ligand‐induced metal–metal contacts, causing photoluminescence in the blue region for the gold complex. Distinct metal‐dependent differences of the coordination behavior between the group 10 transition metals were elucidated by low‐temperature NMR spectroscopy and DFT calculations.     

Moderne Magnesiumorganische Chemie. Neues von der Grignard‐Reaktion

Organomagnesium reagents can be employed for a variety of useful transformations, which are also of relevance for industrial processes. Recent protocols for syntheses of highly functionalized Grignard reagents highlight fascinating new perspectives for organic synthesis. Particularly, the addition of superstoichiometric amounts of LiCl allowed for the preparation of organomagnesium compounds, employing haloarenes or arenes at very mild reaction conditions. These highly functionalized Grignard reagents can be used as starting materials for transition metal‐catalyzed cross‐coupling reactions. New developments in the ligand design resulted in highly active palladium and nickel catalysts for efficient transformations of inexpensive chlorides or tosylates, as well as challenging fluorides. Economically attractive iron‐catalyzed coupling reactions of organomagnesium reagents bear great potential for further developments.     

X‐ray photoelectron spectroscopy of miscible poly(methyl methacrylate)/poly(styrene‐co‐acrylonitrile) and immiscible poly(methyl methacrylate)/polyacrylonitrile polymer surfaces metallized by nickel

A miscible blend of poly(methyl methacrylate) and poly(styrene‐co‐acrylonitrile) and an immiscible blend of poly(methyl methacrylate) and polyacrylonitrile were metallized by nickel, and their surfaces were analyzed by X‐ray photoelectron spectroscopy. Before metallization, the heteroatom distribution at the polymer surface was very different in the miscible and immiscible blends. However, this distribution was modified during metallization, which was only possible via polymer‐bond breaking, leading to similar compositions at the two interfaces. Oxygen exhibited a better affinity with nickel than nitrogen, but nickel oxide and nickel nitride were both formed at the interface. Nickel nitride prevented the metal from diffusing into the substrate, playing the role of a barrier, thus driving the oxygen to the metal layer. Amorphous carbon was also detected at the interface as a new carbon species, but it did not have any significant influence on the changes induced in the distribution of heteroatoms at the polymer surfaces. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1408–1416, 2004