分子印迹整体柱在样品前处理及色谱分析中的应用

分子印迹整体柱(MIPMC)结合了分子印迹聚合物的立体选择性高和整体柱制备简单、柱压低以及传质速率快等优点,是一种极具应用潜力的样品前处理介质和色谱固定相.该文详细介绍了分子印迹整体柱的制备方法,综述了近年分子印迹整体柱在样品前处理及色谱分析中的应用进展,并对其发展趋势做了展望.     

分子印迹液相色谱整体柱

分子印迹是合成预定选择性固定相的新兴技术,整体柱是新型的色谱固定相技术。将分子印迹聚合物与整体柱技术相结合,可以有效提高液相色谱的分离效率,有助于推动整个分离科学的发展,意义重大,是当今分析化学的研究热点。本文就分子印迹液相色谱整体柱的制备合成、色谱分离条件以及物理化学特性评价方法等方面的研究进展进行了较系统的综述,并对该技术目前存在的问题和发展前景进行了探讨。     

分子印迹整体柱富集-高效液相色谱法测定植物中的痕量细胞分裂素

采用分子印迹整体柱富集-高效液相色谱法选择性分离分析了植物样品中痕量细胞分裂素的含量。结果表明,以激动素为模板分子,甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,甲苯与十二醇为致孔剂,可在不锈钢柱管中原位聚合制备激动素分子印迹整体柱;与非分子印迹整体柱对比,该分子印迹整体柱能选择性富集4种细胞分裂素,具有较好的重复性和高的萃取效率;在优化的实验条件下,激动素(K)、激动素核苷(KR)、反式-玉米素(tZ)和meta-topolin(mT)的平均加标回收率分别为91.9%、80.0%、87.5%和50.2%,相对标准偏差均小于11.8%。本方法已成功地用于不同植物样品中4种细胞分裂素的分离和分析。     

对羟基苯甲酸分子印迹毛细管电色谱整体柱的制备与评价

<正>分子印迹(MIP)是合成预定选择性固定相的新兴技术[1-3],毛细管电色谱(CEC)是一种新型高效微分离技术[4-5],CEC和MIP相结合是当前的前沿课题之一。以对羟基苯甲酸为模板分子,采用在线热聚合制备毛细管电色谱整体柱的研究取得了满意的效果[6-7];以布洛芬为模板分子,以2-乙烯基吡啶为功能单体制备分子印迹毛细管电色谱整体柱,成功用于分离布洛芬同分异构体[8],以(S)-腺苷蛋氨酸为模板分子,采用热引发一步法制备分子印迹毛细     

咖啡因分子印迹固相萃取柱的制备及应用

以咖啡因作为模板分子,α-甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,制备了咖啡因分子印迹聚合物(MIP)。与非印迹聚合物(NIP)相比,MIP对咖啡因具有更高的吸附容量和选择性,MIP和NIP对咖啡因的最大静态吸附量分别为28.1和16.5mg/g,相对选择因子为1.25。以咖啡因分子印迹聚合物为固相萃取填料,结合高效液相色谱(HPLC),建立了茶水中咖啡因浓度及人饮茶后血清中咖啡因浓度的检测方法。考察了洗脱剂种类和用量对咖啡因回收率的影响。当萃取柱依次以2mL水活化,水溶液上样,2mL水淋洗,6mL甲醇-乙酸(9∶1,V/V)洗脱,咖啡因在MIP固相萃取柱上的回收率达到97.5%,而在NIP柱上的回收率仅为54.9%。     

咖啡因印迹复合膜的制备及性能研究

以孔径0.45 μm的尼龙微孔滤膜为支撑膜, 咖啡因为模板分子, 丙烯酰胺为功能单体, 乙二醇二甲基丙烯酸酯为交联剂, 采用表面热聚合技术制备对咖啡因具有优良选择透过性的分子印迹复合膜. 采用高效液相色谱技术探讨了不同功能单体印迹聚合膜选择渗透性能的影响, 采用红外光谱分析、X射线衍射分析、热重分析和液相色谱分析等技术对分子印迹膜的化学结构、晶体结构、孔隙率、溶胀性、热稳定性以及选择性等性能进行详细的研究. 结果表明以丙烯酰胺为功能单体的印迹复合膜对咖啡因具有优异的选择透过性, 其分离选择性因子为2.3. 该印迹膜呈现出较好的结合能力, 对印迹分子存在两个结合位点, 最大表观结合量分别为0.146和0.330 μmol/g, 能够较好地应用于山茶叶粗提液中咖啡因的分离和富集, 富集因子为10.52.     

分子印迹磁固相萃取法测定饮料中咖啡因含量

建立了一种磁性分子印迹固相萃取和气相色谱相结合测定饮料中咖啡因含量的新方法。该法自制磁性分子印迹固相萃取材料作为萃取剂,将其分散在样品溶液中,利用外部磁场使磁性萃取剂与溶液快速分离,结合分子印迹技术,提高对分析物的选择性吸附,排除了样品中各类干扰杂质。在最佳条件下进行分析,该方法的检出限为0.05μg/m L(S/N=3),线性范围为0.1~15μg/m L,线性相关系数(R~2)为0.999 1,本法可用于可口可乐、百事可乐、红牛和黑卡六小时试样中咖啡因含量的测定。     

咖啡酸分子印迹聚合物的制备及其用于咖啡酸的高效液相色谱分离

以咖啡酸为模板分子,丙烯酰胺为功能单体,在水溶液中合成了咖啡酸分子印迹聚合物,制备了分子印迹聚合物色谱分离柱。试验结果表明:聚合物对印迹分子具有很好的亲和性和特异选择性,以甲醇-水(25+75)混合溶液为流动相,咖啡酸与其相似物绿原酸的分离度达到1.91。     

2,4-二氯苯氧乙酸分子印迹整体柱的制备、表征及色谱性能研究

以2,4-二氯苯氧乙酸分子为模板,甲基丙烯酸为单体,乙二醇二甲基丙烯酸酯为交联剂,甲苯和十二醇为混合致孔剂,采用热引发原位聚合法制备了作为高效液相色谱固定相的分子印迹整体柱.用红外光谱、扫描电镜、比表面积分析法对聚合物进行了表征.考察了模板分子在不同条件下合成的印迹整体柱及空白整体柱上容量因子的变化规律,同时探讨了流动相中甲醇的体积分数、pH值、流速对印迹整体柱分离性能的影响.结果表明,在优化的合成条件下制备的分子印迹整体柱可在15 min内分离2,4-二氯苯氧乙酸及其类似物苯氧乙酸,分离度为1.52.对柑桔提取液进行了分离测试,结果满意.     

桃叶珊瑚苷-硼酸共聚印迹整体柱的制备及其分子识别性能

以桃叶珊瑚苷为模板,4-乙烯基苯基硼酸为功能单体,制备了桃叶珊瑚苷-硼酸共聚印迹整体柱。考察了分子印迹整体柱的通透性、选择保留性能、吸附及固相萃取性能。结果表明,整体柱通透性好,当使用体积比为49∶1的甲醇-1%HCl混合溶液为流动相时,其对模板具有最强的保留能力和较高的选择性,容量因子高达166.4,选择因子最高达3.200。前沿分析表明整体柱的饱和吸附量达95.16 mg·g^-1。Scatchard分析显示印迹材料主要有两类吸附位点。当分子印迹柱用于从杜仲籽粨粗提物中分离纯化桃叶珊瑚苷时,可获得含量高于85%的产品。当整体柱用于分离分析时,方法的检出限和定量限分别为0.167 mg·kg^-1和0.547 mg·kg^-1,且整体柱可重复使用。     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.     

Catalyst free,visible-light promoted photoaddition reactions between C60 and N-trimethylsilylmethyl-substituted tertiary amines for synthesis of aminomethyl-1,2-dihydrofullerenes

An efficient and benign method for the preparation of aminomethyl-substituted fullerenes has been developed. The process, involving catalyst free, visible-light irradiation of 10% EtOH-toluene solutions containing fullerene C₆₀ and N-trimethylsilylmethyl-substituted amines by using a 20 W compact fluorescent lamp, leads to formation of aminomethyl-substituted fullerene adducts in a highly efficient manner. The photoaddition reaction takes place via a pathway initiated by visible light absorption by C₆₀, followed by SET from the amine to the triplet excited state of C₆₀. Ethanol-promoted desilylation of the resulting a minimum radical then generates the corresponding α-amino radical which couples with the C₆₀ radical anion to form the anion precursor of the fullerene adducts. The new approach using visible-light takes place under mild conditions and it does not require the use of photocatalysts. Thus, the method developed in this effort could broadens the range of functionalized fullerene derivatives that can be readily prepared.     

Highly efficient and stereoselective cycloaddition of nitrones to indolyl- and pyrrolylacrylates

The reactions of various nitrones with indolyl- and pyrrolylacrylates proceeds regioselectively with high diastereoselectivity in the case of aldonitrones, and represents an effective method for obtaining new indolyl- and pyrrolyl-substituted isoxazolidine carboxylates stabilized by weak (CH?O) and moderate (NH?N) strength intramolecular hydrogen bonding. The resulting cycloadducts exhibit promising in vitro anti-influenza activities.     

Transition metal-free direct amination of benzoxazoles using formamides as nitrogen sources

A transition metal-free method for the direct amination of benzoxazoles using formamides as nitrogen sources is reported, which was mediated by an inexpensive and environmentally friendly tetrabutylammonium iodide/tert-butyl hydroperoxide system and gave the 2-aminobenzoxazole derivatives with moderate to good yields.     

l-Proline-catalyzed five-component domino reaction leading to multifunctionalized 1,2,3,4-tetrahydropyridines

Multifunctionalized 1,2,3,4-tetrahydropyridines are concisely synthesized in good yields via l-proline-catalyzed or l-proline/FeCl₃-cocatalyzed one-pot multicomponent reactions (MCRs). The MCRs involve a domino hydroamination/prins reaction/Mannich-type reaction/intramolecular dehydration-cyclization process. The molecular structure of 5baa, one of multifunctionalized 1,2,3,4-tetrahydropyridines, was confirmed by single-crystal X-ray diffraction.     

Exploring the scope of the Gewald reaction: Expansion to a four-component process

An efficient four-component reaction was developed to take advantage of the reactivity of the 2-aminothiophene-3-carbonitrile functionality, which is obtained during the classical three-component Gewald reaction. Various α-methylene bearing ketones were reacted with malononitrile, elemental sulfur, and aryl/heteroarylnitrile derivatives in t-BuOH/NaOH to afford 2-arylthieno[2,3-d]pyrimidin-4-amines in high yields. Preliminary studies revealed the photophysical properties of the products and their potential for use as metal sensors.