Kinetics of iterative carbohydrate transfer to polysaccharide catalyzed by chondroitin polymerase on a highly sensitive flow-type 27 MHz quartz-crystal microbalance

Using a highly sensitive flow-type 27?MHz quartz crystal microbalance, we could detect a small mass change during stepwise and alternating one-sugar transfer of glucuronic acid (GlcA) and N-acetylgalactosamine (GalNAc) to an acceptor, catalyzed by chondroitin polymerase from Escherichia coli strain K4 (K4CP), and analyze the elongation mechanism of K4CP. K4CP was found to bind strongly to a chondroitin acceptor (K(d)=0.97?μM). Although the binding affinity and the catalytic rate constant for each monomer were considerably different, the apparent catalytic efficiency (k(cat)/K(m)) was similar (6.3×10(4) M(-1) s(-1) for GlcA transfer and 3.4×10(4) M(-1) s(-1) for the GalNAc transfer). This is reasonable for the smooth alternating elongation of GlcA and GalNAc on the acceptor. This is the first study to report the determination of kinetic parameters for enzymatic, alternated, sugar elongation.     

Electron‐Self‐Exchange Kinetics of the Cyclooctatetraene/Cyclooctatetraene Radical‐Anion Couple

Rate constants k_hom and k_het are reported for the homogeneous electron‐self‐exchange and the heterogeneous electrochemical electron‐transfer reactions, respectively, of the cyclooctatetraene/cyclooctatetraene^? (COT/COT^.?) redox couple. In acetonitrile, the values k_hom (298 K)=(5±3)×10⁵ M ^?1 s^?1 and k_het (295 K)=8×10^?3 cm s^?1 are found, whereas slightly faster rates are obtained in dimethylformamide, namely, k_hom (298 K)=(1.6±0.6)×10⁶ M ^?1 s^?1 and k_het (295 K)=2×10^?2 cm s^?1. The k_hom rates are obtained from electron spin resonance (ESR) line broadening whereas the k_het rates are measured at a mercurized Pt electrode by using Nicolson’s method. The slowness of both electron‐transfer reactions is caused by the high inner‐sphere reorganization energy that results from the inevitable conformational change that takes place upon going from the tub‐like COT molecule to the planar COT^.? anion. The rates are well‐understood in terms of Marcus theory, including an additional medium inner‐sphere mode which is responsible for the flattening of COT.     

Halide‐Anion Binding by Singly and Doubly N‐Confused Porphyrins

The halide‐binding properties of N‐confused porphyrin (NCP, 1 ) and doubly N‐confused porphyrins (trans‐N₂CP ( 2 ), cis‐N₂CP ( 3 )) were examined in CH₂Cl₂. In the free‐base forms, cis‐N₂CP ( 3 ) showed the highest affinity to each anion (Cl^?, Br^?, I^?) with association constants K_a=7.8×10³, 1.9×10³, and 5.8×10² M ^?1, respectively. As metal complexes, on the other hand, trans‐N₂CP 2–Cu exhibited the highest affinity to Cl^?, Br^?, and I^? with K_a=9.0×10⁴, 2.7×10⁴, and 1.9×10³ M ^?1, respectively. The corresponding K_a values for cis‐N₂CP 3–Cu and NCP 1–Cu were about 1/10 and 1/2, respectively, of those of 2–Cu . With the help of density functional theory (DFT) calculations and complementary affinity measurements of a series of trisubstituted N‐confused porphyrins, the efficient anion binding of NCPs was attributed to strong hydrogen bonding at the highly polarized NH moieties owing to the electron‐deficient C₆F₅ groups at meso positions as well as the ideally oriented dipole moments and large molecular polarizability. The orientation and magnitude of the dipole moments in NCPs were suggested to be important factors in the differentiation of the affinity for anions.     

Reactions of mer(exo)‐ and mer(endo)‐[Co(dien)(dapo)X]2+ Isomers (X=OH,Cl, ONO2, N3)

Properties indirectly determined, or alluded to, in previous publications on the titled isomers have been measured, and the results generally support the earlier conclusions. Thus, the common five‐coordinate intermediate generated in the OH^?‐catalyzed hydrolysis of exo‐ and endo‐[Co(dien)(dapo)X]²⁺ (X=Cl, ONO₂) has the same properties as that generated in the rapid spontaneous loss of OH^? from exo‐ and endo‐[Co(dien)(dapo)OH]²⁺ (40±2% endo‐OH, 60±2% exo‐OH) and an unusually large capacity for capturing (R=[CoN₃]/[CoOH][]=1.3; exo‐[CoN₃]/endo‐[CoN₃]=2.1±0.1). Solvent exchange for spontaneous loss of OH^? from exo‐[Co(dien)(dapo)OH]²⁺ has been measured at 0.04 s^?1 (k₁, 0.50M NaClO₄, 25°) from which similar loss from the endo‐OH isomer may be calculated as 0.24 s^?1 (k₂). The OH^?‐catalyzed reactions of exo‐ and endo‐[Co(dien)(dapo)N₃]²⁺ result in both hydrolysis of coordinated via an OH^?‐limiting process =153 M ^?1 s^?1; =295 M ^?1 s^?1; K_H=1.3±0.1 M ^?1; 0.50M NaClO₄, 25.0°) and direct epimerization between the two reactants =33 M ^?1 s^?1; =110 M ^?1 s^?1; 1.0M NaClO₄, 25.0°). Comparisons are made with other rapidly reacting Co^III‐acido systems.     

Substrate‐Guided Front‐Face Reaction Revealed by Combined Structural Snapshots and Metadynamics for the Polypeptide N‐Acetylgalactosaminyltransferase 2

The retaining glycosyltransferase GalNAc‐T2 is a member of a large family of human polypeptide GalNAc‐transferases that is responsible for the post‐translational modification of many cell‐surface proteins. By the use of combined structural and computational approaches, we provide the first set of structural snapshots of the enzyme during the catalytic cycle and combine these with quantum‐mechanics/molecular‐mechanics (QM/MM) metadynamics to unravel the catalytic mechanism of this retaining enzyme at the atomic‐electronic level of detail. Our study provides a detailed structural rationale for an ordered bi–bi kinetic mechanism and reveals critical aspects of substrate recognition, which dictate the specificity for acceptor Thr versus Ser residues and enforce a front‐face S_Ni‐type reaction in which the substrate N‐acetyl sugar substituent coordinates efficient glycosyl transfer.     

Quantification of Ion‐Pairing Effects on the Nucleophilic Reactivities of Benzoyl‐ and Phenyl‐Substituted Carbanions in Dimethylsulfoxide

Second‐order rate constants for the reactions of acceptor‐substituted phenacyl (PhCO?CH^??Acc) and benzyl anions (Ph?CH^??Acc) with diarylcarbenium ions and quinone methides (reference electrophiles) have been determined in dimethylsulfoxide (DMSO) solution at 20 °C. By studying the kinetics in the presence of variable concentrations of potassium, sodium and lithium salts (up to 10^?2 mol L^?1), the influence of ion‐pairing on the reaction rates was examined. As the concentration of K⁺ did not have any influence on the rate constants at carbanion concentrations in the range of 10^?4–10^?3 mol L^?1, the acquired rate constants could be assigned to the reactivities of the free carbanions. The counter ion effects increase, however, in the series K⁺<Na⁺<Li⁺, and the sensitivity of the carbanion reactivities toward variation of the counter ion strongly depends on the structure of the carbanions. The reactivity parameters N and s_N of the free carbanions were derived from the linear plots of log k₂ against the electrophilicity parameters E of the reference electrophiles, according to the linear‐free energy relationship log k₂(20 °C)=s_N(N+E). These reactivity parameters can be used to predict absolute rate constants for the reactions of these carbanions with other electrophiles of known E parameters.     

Multifunctional Tricarbazolo Triazolophane Macrocycles: One‐Pot Preparation,Anion Binding,and Hierarchical Self‐Organization of Multilayers

Programming the synthesis and self‐assembly of molecules is a compelling strategy for the bottom‐up fabrication of ordered materials. To this end, shape‐persistent macrocycles were designed with alternating carbazoles and triazoles to program a one‐pot synthesis and to bind large anions. The macrocycles bind anions that were once considered too weak to be coordinated, such as PF₆^?, with surprisingly high affinities (β₂=10¹¹ M ^?2 in 80:20 chloroform/methanol) and positive cooperativity, α=(4 K₂/K₁)=1200. We also discovered that the macrocycles assemble into ultrathin films of hierarchically ordered tubes on graphite surfaces. The remarkable surface‐templated self‐assembly properties, as was observed by using scanning tunneling microscopy, are attributed to the complementary pairing of alternating triazoles and carbazoles inscribed into both the co‐facial and edge‐sharing seams that exist between shape‐persistent macrocycles. The multilayer assembly is also consistent with the high degree of molecular self‐association observed in solution, with self‐association constants of K=300 000 M ^?1 (chloroform/methanol 80:20). Scanning tunneling microscopy data also showed that surface assemblies readily sequester iodide anions from solution, modulating their assembly. This multifunctional macrocycle provides a foundation for materials composed of hierarchically organized and nanotubular self‐assemblies.     

Direct Electrochemistry of Glucose Oxidase Immobilized on Titanium Carbide‐Au Nanoparticles‐Fullerene C60 Composite Film and Its Biosensing for Glucose

The direct electrochemistry of glucose oxidase (GOD) immobilized on the designed titanium carbide‐Au nanoparticles‐fullerene C₆₀ composite film modified glassy carbon electrode (TiC‐AuNPs‐C₆₀/GCE) and its biosensing for glucose were investigated. UV‐visible and Fourier‐transform infrared spectra of the resulting GOD/TiC‐AuNPs‐C₆₀ composite film suggested that the immobilized GOD retained its original structure. The direct electron transfer behaviors of immobilized GOD at the GOD/TiC‐AuNPs‐C₆₀/GCE were investigated by cyclic voltammetry in which a pair of well‐defined, quasi‐reversible redox peaks with the formal potential (E^0′) of ‐0.484 V (vs. SCE) in phosphate buffer solution (0.05 M, pH 7.0) at the scan rate of 100 mV·s^?1 were obtained. The proposed GOD modified electrode exhibited an excellent electrocatalytic activity to the reduction of glucose, and the currents of glucose reduction peak were linearly related to glucose concentration in a wider linearity range from 5.0 × 10^?6 to 1.6 × 10^?4 M with a correlation coefficient of 0.9965 and a detection limit of 2.0 × 10^?6 M (S/N = 3). The sensitivity and the apparent Michaelis‐Menten constant (K_M^app) were determined to be 149.3 μA·mM^?1·cm^?2 and 6.2 × 10^?5 M, respectively. Thus, the protocol will have potential application in studying the electron transfer of enzyme and the design of novel electrochemical biosensors.     

Lanthanide‐Based Layer‐Type Two‐Dimensional Coordination Polymers Featuring Slow Magnetic Relaxation,Magnetocaloric Effect and Proton Conductivity

Three lanthanide‐based two‐dimensional (2D) coordination polymers (CPs), [Ln(L)(H₂O)₂]_n, {H₃L=(HO)₂P(O)CH₂CO₂H; Ln=Dy³⁺ (CP 1 ), Er³⁺ (CP 2 )} and [{Gd₂(L)₂(H₂O)₃}^.H₂O]_n, (CP 3 ) were hydrothermally synthesized using phosphonoacetic acid as a linker. Structural features revealed that the dinuclear Ln³⁺ nodes were present in the 2D sheet of CP 1 and CP 2 while in the case of CP 3 , nodes were further connected to each other forming a chain‐type arrangement throughout the network. The magnetic studies show field‐induced slow magnetic relaxation property in CP 1 and CP 2 with U_eff values of 72 K (relaxation time, τ₀=3.05×10^?7 s) and 38.42 K (relaxation time, τ₀=4.60×10^?8 s) respectively. Ab‐initio calculations suggest that the g tensor of Kramers doublet of the lanthanide ion (Dy³⁺ and Er³⁺) is strongly axial in nature which reflects in the slow magnetic relaxation behavior of both CPs. CP 3 exhibits a significant magnetocaloric effect with ?ΔS_m=49.29 J kg^?1 K^?1, one of the highest value among the reported 2D CPs. Moreover, impedance analysis of all the CPs show high proton conductivity with values of 1.13×10^?6 S cm^?1, 2.73×10^?3 S cm^?1 and 2, 6.27×10^?6 S cm^?1 for CPs 1 – 3 , respectively, at high temperature (>75 °C) and maximum 95 % relative humidity (RH).     

Energy Transfer in Aminonaphthalimide‐Boron‐Dipyrromethene (BODIPY) Dyads upon One‐ and Two‐Photon Excitation: Applications for Cellular Imaging

Aminonaphthalimide–BODIPY energy transfer cassettes were found to show very fast (k_EET≈10¹⁰–10¹¹ s^?1) and efficient BODIPY fluorescence sensitization. This was observed upon one‐ and two‐photon excitation, which extends the application range of the investigated bichromophoric dyads in terms of accessible excitation wavelengths. In comparison with the direct excitation of the BODIPY chromophore, the two‐photon absorption cross‐section δ of the dyads is significantly incremented by the presence of the aminonaphthalimide donor [δ≈10 GM for the BODIPY versus 19–26 GM in the dyad at λ_exc=840 nm; 1 GM (Goeppert–Mayer unit)=10^?50 cm⁴ s molecule^?1 photon^?1]. The electronic decoupling of the donor and acceptor, which is a precondition for the energy transfer cassette concept, was demonstrated by time‐dependent density functional theory calculations. The applicability of the new probes in the one‐ and two‐photon excitation mode was demonstrated in a proof‐of‐principle approach in the fluorescence imaging of HeLa cells. To the best of our knowledge, this is the first demonstration of the merging of multiphoton excitation with the energy transfer cassette concept for a BODIPY‐containing dyad.     

Ions Can Move a Proton‐Coupled Electron‐Transfer Reaction into Tunneling Regime

The effects of charged species on proton‐coupled electron‐transfer (PCET) reaction should be of significance for understanding/application of important chemical and biological PCET systems. Such species can be found in proximity of activated complex in a PCET reaction, although they are not involved in the charge transfer process. Reported here is the first study of the above‐mentioned effects. Here, the effects of Na⁺, K⁺, Li⁺, Ca²⁺, Mg²⁺, and Me₄N⁺ observed in PCET reaction of ascorbate monoanions with hexacyanoferrate(III) ions in H₂O reveal that, in presence of ions, this over‐the‐barrier reaction entered into tunneling regime. The observations are: a) dependence of the rate constant on the cation concentration, where the rate constant is 71 (at I = 0.0023), and 821 (at 0.5M K⁺), 847 (at 1.0M Na⁺), and 438 M ^?1 s^?1 (at 0.011M Ca²⁺); b) changes of kinetic isotope effect (KIE) in the presence of ions, where k_H/k_D=4.6 (at I = 0.0023), and 3.4 (in the presence of 0.5M K⁺), 3.3 (at 1.0M Na⁺), 3.9 (at 0.001M Ca²⁺), and 3.9 (at 0.001M Mg²⁺), respectively; c) the isotope effects on Arrhenius pre‐factor where A_H/A_D=0.97 (0.15) in absence of ions, and 2.29 (0.60) (at 0.5M Na⁺), 1.77 (0.29) (at 1.0M Na⁺), 1.61 (0.25) (at 0.5M K⁺), 0.42 (0.16) (at 0.001M Ca²⁺) and 0.16 (0.19) (at 0.001M Mg²⁺); d) isotope differences in the enthalpies of activation in H₂O and in D₂O, where ΔΔH^?(D,H)=3.9 (0.4) kJ mol^?1 in the absence of cations, 1.3 (0.6) at 0.5M Na⁺, 1.8 (0.4) at 0.5M K⁺, 1.5 (0.4) at 1.0M Na⁺, 5.5 (0.9) (at 0.001M Ca²⁺), and 7.9 (2.8) (at 0.001M Mg²⁺) kJ mol^?1; e) nonlinear proton inventory in reaction. In the H₂O/dioxane 1 : 1, the observed KIE is 7.8 and 4.4 in the absence and in the presence of 0.1M K⁺, respectively, and A_H/A_D=0.14 (0.03). The changes when cations are present in the reaction are explained in terms of termolecular encounter complex consisting of redox partners, and the cation where the cation can be found in a near proximity of the reaction‐activated complex thus influencing the proton/electron double tunneling event in the PCET process. A molecule of H₂O is involved in the transition state. The resulting ‘configuration’ is more ‘rigid’ and more appropriate for efficient tunneling with Na⁺ or K⁺ (extensive tunneling observed), i.e., there is more precise organized H transfer coordinate than in the case of Ca²⁺ and Mg²⁺ (moderate tunneling observed) in the reaction.     

Synthesis of sugar‐based macromolecules via sono‐ATRP in miniemulsion

Ultrasound‐mediated atom transfer radical polymerization (sono‐ATRP) in miniemulsion media is used for the first time for the preparation of complex macromolecular architectures by a facile two‐step synthetic route. Initially, esterification reaction of sucrose or lactulose with α‐bromoisobutyryl bromide (BriBBr) is conducted to receive multifunctional ATRP macroinitiators with 8 initiation sites, followed by polymerization of n‐butyl acrylate (BA) forming arms of the star‐like polymers. The brominated lactulose‐based molecule was examined as an ATRP initiator by determining the activation rate constant (k_a) of the catalytic process in the presence of a copper(II) bromide/tris(2‐pyridylmethyl)amine (Cu^IIBr₂/TPMA) catalyst in both organic solvent and for the first time in miniemulsion media, resulting in k_a = (1.03 ± 0.01) × 10⁴ M^?1 s^?1 and k_a = (1.16 ± 0.56) × 10³ M^?1 s^?1, respectively. Star‐like macromolecules with a sucrose or lactulose core and poly(n‐butyl acrylate) (PBA) arms were successfully received using different catalyst concentration. Linear kinetics and a well‐defined structure of synthesized polymers reflected by narrow molecular weight distribution (M_w/M_n = 1.46) indicated 105 ppm wt of catalyst loading as concentration to maintain controlled manner of polymerization process. ¹H NMR analysis confirms the formation of new sugar‐inspired star‐shaped polymers.     

Ester Hydrolysis by a Cyclodextrin Dimer Catalyst with a Tridentate N,N′,N′′‐Zinc Linking Group

A new β‐cyclodextrin dimer, 2,6‐dimethylpyridine‐bridged‐bis(6‐monoammonio‐β‐cyclodextrin) (pyridyl BisCD, L), is synthesized. Its zinc complex (ZnL) is prepared, characterized, and applied as a catalyst for diester hydrolysis. The formation constant (log K_ML=7.31±0.04) of the complex and deprotonation constant (pK_a1=8.14±0.03, pK_a2=9.24±0.01) of the coordinated water molecule were determined by a potentiometric pH titration at (25±0.1)°C, indicating a tridentate N,N′,N′′‐zinc coordination. Hydrolysis kinetics of carboxylic acid esters were determined with bis(4‐nitrophenyl)carbonate (BNPC) and 4‐nitrophenyl acetate (NA) as the substrates. The resulting hydrolysis rate constants show that ZnL has a very high rate of catalysis for BNPC hydrolysis, yielding an 8.98×10³‐fold rate enhancement over uncatalyzed hydrolysis at pH 7.00, compared to only a 71.76‐fold rate enhancement for NA hydrolysis. Hydrolysis kinetics of phosphate esters catalyzed by ZnL are also investigated using bis(4‐nitrophenyl)phosphate (BNPP) and disodium 4‐nitrophenyl phosphate (NPP) as the substrates. The initial first‐order rate constant of catalytic hydrolysis for BNPP was 1.29×10^?7 s^?1 at pH 8.5, 35 °C and 0.1 mM catalyst concentration, about 1600‐fold acceleration over uncatalyzed hydrolysis. The pH dependence of the BNPP cleavage in aqueous buffer was shown as a sigmoidal curve with an inflection point around pH 8.25, which is nearly identical to the pK_a value of the catalyst from the potentiometric titration. The k_BNPP of BNPP hydrolysis promoted by ZnL is found to be 1.68×10^?3 M ^?1 s^?1, higher than that of NPP, and comparatively higher than those promoted by its other tridentate N,N′,N′′‐zinc analogues.     

Kinetic Study of Peroxidase‐Catalyzed Coupling of Benzene‐1,4‐diamine and N‐(2‐Aminoethyl)naphthalen‐1‐amine: Development of Micromolar Hydrogen Peroxide Reaction System

A novel chromogenic method to measure the peroxidase activity using para‐phenylenediamine dihydrochloride (=benzene‐1,4‐diamine hydrochloride; PPDD) and N‐(1‐naphthyl)ethylenediamine dihydrochloride (=N‐(2‐aminoethyl)naphthalen‐1‐amine; NEDA) is presented. The PPDD entraps the free radical and gets oxidized to electrophilic diimine, which couples with NEDA to give an intense red‐colored chromogenic species with maximum absorbance at 490 nm. This assay was adopted for the quantification of H₂O₂ between 20 and 160 μM . Catalytic efficiency and catalytic power of the commercial peroxidase were found to be 4.47×10⁴ M ^?1 min^?1 and 3.38×10^?4 min^?1, respectively. The catalytic constant (k_cat) and specificity constant (k_cat/K_m) at saturated concentration of the co‐substrates were 0.0245×10³ min^?1 and 0.0445 μM ^?1 min^?1, respectively. The chromogenic coupling reaction has a minimum interference from the reducing substances such as ascorbic acid, L ‐cystein, citric acid, and oxalic acid. The method being simple, rapid, precise, and sensitive, its applicability has been tested in the crude vegetable extracts that showed peroxidase activity.     

Evaluation of the Oxo‐bridged Dinuclear Ruthenium Ammine Complex as Redox Mediator in an Electrochemical Biosensor

The mediation of electron‐transfer by oxo‐bridged dinuclear ruthenium ammine [(bpy)₂(NH₃)Ru^III(µ‐O)Ru^III(NH₃)(bpy)₂]⁴⁺ for the oxidation of glucose was investigated by cyclic voltammetry. These ruthenium (III) complexes exhibit appropriate redox potentials of 0.131–0.09 V vs. SCE to act as electron‐transfer mediators. The plot of anodic current vs. the glucose concentration was linear in the concentration range between 2.52×10^?5 and 1.00×10^?4 mol L^?1. Moreover, the apparent Michaelis‐Menten kinetic (K_M^app) and the catalytic (K_cat) constants were 8.757×10^?6 mol L^?1 and 1,956 s^?1, respectively, demonstrating the efficiency of the ruthenium dinuclear oxo‐complex [(bpy)₂(NH₃)Ru^III(µ‐O)Ru^III(NH₃)(bpy)₂]⁴⁺ as mediator of redox electron‐transfer.     

Benzodifuran‐containing well‐defined π‐conjugated polymers for photovoltaic cells

Two well‐defined alternating π‐conjugated polymers containing a soluble electroactive benzo[1,2‐b:4,5‐b′]difuran (BDF) chromophore, poly(BDF‐(9‐phenylcarbazole)) (PBDFC), and poly(BDF‐benzothiadiazole) (PBDFBTD) were synthesized via Sonogashira copolymerizations. Their optical, electrochemical, and field‐effect charge transport properties were characterized and compared with those of the corresponding homopolymer PBDF and random copolymers of the same overall composition. All these polymers cover broad optical absorption ranges from 250 to 750 nm with narrow optical band gaps of 1.78–2.35 eV. Both PBDF and PBDFBTD show ambipolar redox properties with HOMO levels of ?5.38 and ?5.09 eV, respectively. The field‐effect mobility of holes varies from 2.9 × 10^?8 cm² V^?1 s^?1 in PBDF to 1.0 × 10^?5 cm² V^?1 s^?1 in PBDFBTD. Bulk heterojunction solar cell devices were fabricated using the polymers as the electron donor and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester as the electron acceptor, leading to power conversion efficiencies of 0.24–0.57% under air mass 1.5 illumination (100 mW cm^?2). These results indicate that their band gaps, molecular electronic energy levels, charge mobilities, and molecular weights are readily tuned by copolymerizing the BDF core with different π‐conjugated units. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Ruthenium(II)–Polyimine–Coumarin Light‐Harvesting Molecular Arrays: Design Rationale and Application for Triplet–Triplet‐Annihilation‐Based Upconversion

Ru^II–bis‐pyridine complexes typically absorb below 450 nm in the UV spectrum and their molar extinction coefficients are only moderate (ε<16 000 M ^?1 cm^?1). Thus, Ru^II–polyimine complexes that show intense visible‐light absorptions are of great interest. However, no effective light‐harvesting ruthenium(II)/organic chromophore arrays have been reported. Herein, we report the first visible‐light‐harvesting Ru^II–coumarin arrays, which absorb at 475 nm (ε up to 63 300 M ^?1 cm^?1, 4‐fold higher than typical Ru^II–polyimine complexes). The donor excited state in these arrays is efficiently converted into an acceptor excited state (i.e., efficient energy‐transfer) without losses in the phosphorescence quantum yield of the acceptor. Based on steady‐state and time‐resolved spectroscopy and DFT calculations, we proposed a general rule for the design of Ru^II–polypyridine–chromophore light‐harvesting arrays, which states that the ¹IL energy level of the ligand must be close to the respective energy level of the metal‐to‐ligand charge‐transfer (M LCT) states. Lower energy levels of ¹IL/³IL than the corresponding ¹M LCT/³M LCT states frustrate the cascade energy‐transfer process and, as a result, the harvested light energy cannot be efficiently transferred to the acceptor. We have also demonstrated that the light‐harvesting effect can be used to improve the upconversion quantum yield to 15.2 % (with 9,10‐diphenylanthracene as a triplet‐acceptor/annihilator), compared to the parent complex without the coumarin subunit, which showed an upconversion quantum yield of only 0.95 %.     

Studies on Intra‐Supramolecular and Intermolecular Electron‐Transfer Processes between Zinc Naphthalocyanine and Imidazole‐Appended Fullerene

Spectroscopic, computational, redox, and photochemical behavior of a self‐assembled donor‐acceptor dyad formed by axial coordination of zinc naphthalocyanine, ZnNc, and fulleropyrrolidine bearing an imidazole coordinating ligand (2‐(4′‐imidazolylphenyl)fulleropyrrolidine, C₆₀Im) was investigated in noncoordinating solvents, toluene and o‐dichlorobenzene, and the results were compared to the intermolecular electron transfer processes in a coordinating solvent, benzonitrile. The optical absorption and ab initio B3 LYP/3–21G(*) computational studies revealed self‐assembled supramolecular 1:1 dyad formation between the ZnNc and C₆₀Im entities. In the optimized structure, the HOMO was found to be entirely located on the ZnNc entity while the LUMO was found to be entirely on the fullerene entity. Cyclic voltammetry studies of the dyad exhibited a total of seven one‐electron redox processes in o‐dichlorobenzene, with 0.1 M tetrabutylammonium perchlorate. The excited‐state electron‐transfer processes were monitored by both optical‐emission and transient‐absorption techniques. Direct evidence for the radical‐ion‐pair (C₆₀Im^.?:ZnNc ^{. +} ) formation was obtained from picosecond transient‐absorption spectral studies, which indicated charge separation from the singlet‐excited ZnNc to the C₆₀Im moiety. The calculated rates of charge separation and charge recombination were 1.4×10¹⁰ s^?1 and 5.3×10⁷ s^?1 in toluene and 8.9×10⁹ s^?1 and 9.2×10⁷ s^?1 in o‐dichlorobenzene, respectively. In benzonitrile, intermolecular electron transfer from the excited triplet state of ZnNc to C₆₀Im occurs and the second‐order rate constant (k_q^triplet) for this quenching process was 5.3×10⁸ M ^?1 s^?1.     

Photoinduced Energy Transfer from Poly(N‐vinylcarbazole) to Tricarbonylchloro‐(2,2′‐bipyridyl)rhenium(I)

This work investigates the photoinduced energy transfer from poly(N‐vinylcarbazole) (PVK), as a donor material, to fac‐(2,2′‐bipyridyl)Re(CO)₃Cl, as a catalyst acceptor, for its potential application towards CO₂ reduction. Photoluminescence quenching experiments reveal dynamic quenching through resonance energy transfer in solid donor/acceptor mixtures and in solid/liquid systems. The bimolecular reaction rate constant at solution–film interfaces for the elementary reaction of the excited state with the quencher material could be determined as 8.8(±1.4)×10¹¹ L mol^?1 s^?1 by using Stern–Volmer analysis. This work shows that PVK is an effective and cheap absorber material that can act efficiently as a redox photosensitizer in combination with fac‐(2,2′‐bipyridyl)Re(CO)₃Cl as a catalyst acceptor, which might lead to possible applications in photocatalytic CO₂ reduction.     

Influence of nitroxide structure on the 2,5‐ and 2,6‐spirodicyclohexyl substituted cyclic nitroxide‐mediated free‐radical polymerization of styrene

The 2,6‐spirodicyclohexyl substituted nitroxide, cyclohexane‐1‐spiro‐2′‐(3′,5′‐dioxo‐4′‐benzylpiperazine‐1′‐oxyl)‐6′‐spiro‐1″‐cyclohexane (BODAZ), was investigated as a mediator for controlled/living free‐radical polymerization of styrene. The values of the number‐average molecular weight increased linearly with conversion, but the polydispersities were higher than for the corresponding 2,2,6,6‐tetramethylpiperidinyl‐1‐oxy (TEMPO) and 2,5‐bis(spirocyclohexyl)‐3‐benzylimidazolidin‐4‐one‐1‐oxyl (NO88Bn) mediated systems at approximately 2.2 and 1.6 at 100 and 120 °C, respectively. These results were reflected in the rate coefficients obtained by electron spin resonance spectroscopy; at 120 °C, the values of the rate coefficients for polystyrene‐BODAZ alkoxyamine dissociation (k_d), combination of BODAZ and propagating radicals (k_c), and the equilibrium constant (K) were 1.60 × 10^?5 s^?1, 5.19 × 10⁶ M^?1 s^?1, and 3.08 × 10^?12 M, respectively. The value of k_d was approximately one and two orders of magnitude lower, and that of K was approximately 20 and 7 times lower than for the NO88Bn and TEMPO adducts. These results are explained in terms of X‐ray crystal structures of BODAZ and NO88Bn; the six‐membered ring of BODAZ deviates significantly from planarity as compared to the planar five‐membered ring of NO88Bn and possesses a benzyl substituent oriented away from the nitroxyl group leading to a seemingly more exposed oxyl group, which resulted in a higher k_c and a lower k_d than NO88Bn. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3892–3900, 2003