Fullerene encapsulation with calix[5]arenes

This paper presents the synthesis of the fullerene hosts based on the calix[5]arenes and their binding properties. Calix[5]arenes 1a, 2, 3a bind C₆₀ or C₇₀ in organic solvents. The solvent effect of the fullerene complexation was clearly observed; the association constant decreases in a solvent with high solubility for C₆₀. Covalently linked double-calix[5]arenes 4-6 were also investigated on their binding properties for fullerenes in organic solvents. Their binding abilities for both C₆₀ and C₇₀ are extremely high in toluene solution. Higher binding selectivity toward C₇₀ is observed by all the double-calix[5]arenes. The selectivity of 5a toward C₇₀/C₆₀ is highest in toluene with a value of 10. The structures of the supramolecular complexes of the calix[5]arene hosts and C₆₀ or C₇₀ were investigated by using ¹H and ¹³C NMR studies. The molecular mechanics calculation and X-ray structure reveal that the interior of the calix[5]arene is complementary to the exterior of C₆₀ molecule. In contrast, the host-guest complexes of C₇₀ with the simple calix[5]arenes take many conformational options due to its less symmetric shape. The molecular mechanics calculation and our chemical shift simulation nicely worked to estimate the reliable structures; the calix[5]arene cavity takes up C₇₀ molecule, and the C₇₀ molecule tilts significantly from the C5 axis of the calix[5]arene. In the case of the host-guest complex of C₇₀ with the double-calix[5]arene, the molecular dynamics simulation of the host-guest complex represented the realistic movement of the bound C₇₀ inside the cavity. The combination of the molecular dynamics simulation and the chemical shift simulation of the host-guest complex suggested that the C₇₀ molecule rapidly moves inside the cavity.     

Synthesis of novel p-tert-butyl-calix[4]arene derivatives and their cation binding ability: chromogenic effect upon side arms binding

A series of novel double-armed calix[4]arene derivatives, i.e. 5,11,17,23-tetra-tert-butyl -25,27-bis[2-[(2-hydroxy-5-(4-nitroazo)benzylidene)amino]ethoxy]-26,28-dihydroxy-calix[4]-arene (4), 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[(2-hydroxy-5-(2-nitroazo)benzylidene) amino]ethoxy]-26,28-dihydroxycalix[4]arene (5), 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[(2-hydroxy-5-(4-chloroazo)benzylidene)amino]ethoxy]-26,28-dihydroxycalix[4]arene (6), have been synthesized as an selective chromoionophore for Na⁺. The complexation behavior of ligands 4-6 with alkali metal ions Na⁺, K⁺, Rb⁺and Cs⁺ has been evaluated by using UV-Vis spectrometry in CH₃CN-H₂O (99:1/V:V) solution at 25°C. The UV-Vis spectra show that the complexation of 4-6 with Na⁺exhibits obvious bathochromic shifts (λ_max 379→480 nm) and there is a unique color change in the solution from yellow to red upon complexation. The binding constants for Na⁺ are higher than that of other alkali metal ions, giving the highest cation selectivity up to 7 for Na⁺/K⁺. The binding ability and photophysical behavior of alkali cations by calix[4]arene derivatives 4-6 are discussed from the point of view of substituted effects at the lower rim of parent calix[4]arene and size-fit concept between host calix[4]arenes and guest cations.     

Synthesis, characterization and electrochemical properties of two new calix[4]arene derivatives bearing two ferrocene imine or ferrocene amine units at the upper rim

A novel calix[4]arene derivative with two ferrocenyl Schiff-base groups at the upper rim 3 has been synthesized from 5,17-diformyl-25,27-dipropoxy-26,28-dihydroxy calix[4]arene and 4-ferrocenylaniline via condensation reaction. Reduction of 3 with sodium borohydride led to calix[4]arene derivative 4 with two amino ferrocenyl groups at the upper rim. The ferrocenyl Schiff-base calix[4]arene and its corresponding reduced amine have been purified and characterized by elemental analysis,¹H NMR, FTIR, Mass and UV-vis spectral data. Electrochemical properties of compounds 3 and 4 have been investigated. Cyclic voltammograms of 3 and 4 show reversible redox couples of ferrocene/ferrocinium at E_1/2=0.401 V and 0.346 V, respectively. Electrochemical studies show these redox active compounds electrochemically recognize trivalent lanthanides La³⁺ and Ce³⁺ and divalent Pb²⁺ and Cu²⁺cations. With ferrocenyl Schiff-base calix[4]arene 3 an anodic shift as large as 130 mV is observed on addition of one equivalent of Ce³⁺ ion. Also extraction properties of compound 4 towards some metal cations have been described. It has been observed that compound 4 has a good selectivity for metal cations Fe³⁺, Cu²⁺, Pb²⁺ and Cd²⁺ against Ni²⁺ and Co²⁺.     

Synthesis of new calix[4]arenes containing nucleoside bases

A family of novel calix[4]arene derivatives containing nucleoside bases were designed and synthesized. Coupling reaction between para mono- or bis-amino calix[4]arenes 5, 6 or 7 and thymin-1-ylacetic acid in the presence of DCC afforded mono- or bis-thymine-substituted calix[4]arenes 8, 9 or 10 in over 70% yield. Owing to the low solubility of adenine-N⁹-ylacetic acid in DMF and DMSO and the weak nucleophilicity of aminocalix[4]arene derivatives, alternatively, the substitution reaction of bromoacetylated aminocalix[4]arenes derivatives 11, 12, 13 with adenine in the presence of sodium hydride was carried out to synthesize mono- or bis-adenine-substituted calix[4]arenes. Two kinds of isomers 15 and 16 or 17 and 18 were obtained due to the non-regiospecific alkylation of adenine, and their structures have been confirmed by ¹³C NMR and ¹H NMR spectra.     

Complexation and extraction of non-ferrous metals by calix[n]arene phosphine oxides

The extraction of non-ferrous metal (M²⁺) nitrates by the calix[4,6]arenes (L), bearing four or six phosphine oxide donor groups at the upper or at the lower rim, was quantitatively described in the form of [M_n(NO₃)_2nL] (n = 1, 2) complexes. The extraction constants (Zn²⁺ > Cu²⁺ > Co²⁺ > Ni²⁺) for the both types of L coincide with Irving-Williams sequence. Calix[4]arenes, phosphorylated at the lower (narrow) rim, provide better stability of ML complexes because of the best spatial fitting of M²⁺ by the donor groups. For the upper (wide) rim phosphorylated calix[4]arenes M₂L and ML₂ complexes are more stable. Unusual zwitterionic [Co₂(NO₃)₄L] complex of the lower rim tetraphosphorylated calix[4]arene 1 was determined by X-ray structural analysis.     

Synthesis of novel calix[4]arenes containing organosilicon groups

Metalation of (RSiMe₂)₃CH (1a R = H, 1b R = Me, 1c R = Ph) with lithium diisopropylamide (LDA) or methyllithium in THF gave organolithium reagents (RSiMe₂)₃CLi, which reacted with the formylated calixarene (2), to give the corresponding 5,17-bis[2,2-bis(organosilyl)-1-ethenyl]-25,26,27,28-tetrapropoxycalix[4]arenes (3a, 3b and 3c) via the Peterson olefination. The compounds (RSiMe₂)₃CLi were treated with 25,26,27,28-tetrakis(4-bromobutoxy)calix[4]arene (4) to give 25,26,27,28-tetrakis[4-(tris(dimethylsilyl)methyl)butoxy] calix[4]arene (5a) and 25,26,27,28-tetrakis[4-(tris(trimethylsilyl)methyl)butoxy] calix[4]arene (5b) via nucleophilic substitution reactions. However the compound 25,26,27,28-tetrakis[4-(tris(dimethylphenylsilyl)methyl)butoxy] calix[4]arene (5c) was not obtained, presumably because (PhSiMe₂)₃C- is highly sterically hindered and the reactivity of its derivatives is low. The compound 5a has potential as a core for dendrimers.     

Physicochemical Characterization of Hydrated 4-Sulphonato-Calix[n]arenes: Thermal,Structural, and Sorption Properties

In this study, the thermal behavior of three hydrated water-soluble 4-sulphonato calix[n]arenes was investigated. The melting points, heats of fusion, and heats of solution of the calix[4]arene, calix[6]arene and calix[8]arene were 277, 262, and 270°C; 192, 242 and 351 kJ/mol; and 30, 58 and 63 kJ/mol, respectively. Lower heat of fusion, smaller increase in entropy and smaller heat of solution of the calix[4]arene compared to the calix[6]arene and calix[8]arene showed that less heat was required to break up the crystal lattice of the smaller macromolecule. This apparent anomaly is rationalized in terms of smaller cooperativity of interaction between the molecules of calix[4]arene in the crystal lattice, although the strength of the individual interactions is stronger as evidenced by the higher melting point. TGA analysis indicated that about 17–20% of water was associated with the calix[n]arenes. Both TGA and hot stage microscopy results indicated that upon heating these molecules underwent stepwise water loss. TGA kinetics showed that the 4-sulphonato-calix[8]arene lost water easier than the other two calixarenes. The moisture adsorption behavior of all calixarenes followed type II isotherms. For the same amount of material, the calix[6]arene adsorbed more moisture than the calix[4]arene and the calix[8]arene. Moreover, dehydrated less crystalline 4-sulphonic-calix[n]arenes powders are hydroscopic.

     

Cyclopentene-fused [C60]-fullerenes: synthesis and electrochemical properties

New cyclopentene-fused [C60]-fullerene derivatives containing terpene moieties have been synthesized by [3?+?2]-addition to fullerene C₆₀. All obtained products were fully characterized by ¹H- and ¹³C-NMR, IR, and MS. The electrochemical properties have been studied by cyclic voltammograms (CV), combined with absorption spectra, which are consistent with those obtained from density functional theory (DFT) calculations. It was found that all fulleropyrrolidines showed very similar absorption spectra, orbital energies, in which electron densities in both the LUMO and HOMO are mainly located on the fullerene cage, suggesting that C₆₀ act as the acceptor. All the compounds exhibited good thermal stability. All determined characteristics of fullerene conjugates were compared to [6,6]-phenyl-C61-butyric acid methyl ester ([60]PCBM), a popular fullerene-containing compound.

Graphical abstract

Open image in new window

     

Capping the upper and lower rims of calix[4]arenes by aryl dinitrile oxide reactions

1,3-Dipolar cycloadditions of upper- and lower-rim diallylcalix[4]arenes (1 and 3) with aryl dinitrile oxides provide a unique and efficient way of capping the calix[4]arenes. When dinitrile oxides reacted with 5-allylcalix[4]arene 7, they underwent a 1,3-dipolar cycloaddition on one side and an electrophilic substitution on the other side, which led to a novel type of asymmetric calix[4]arenes (9 and 12).     

Electrochemical properties of <Emphasis Type="Italic">n</Emphasis>-sulfonatothiacalyx[4]arene complexes with Fe<Superscript>3+</Superscript> and [Co(dipy)<Subscript>3</Subscript>]<Superscript>3+</Superscript> ions

The electrochemical properties of n-sulfonatothiacalyx[4]arene (H₄XNa₄) complexes with [Co(dipy)₃]³⁺ and Fe³⁺ ions were studied by means of cyclic voltammetry in aqueous solution at pH 2.5. The observed single-electron reduction of [Co(dipy)₃]³⁺ bound extraspherically to the upper rim and Fe³⁺ ion bound intraspherically to the lower rim of n-sulfonatothiacalyx[4]arene in binary [Co(dipy)₃]³⁺ · H₃X^5?, H₃X^5? · Fe³⁺, and ternary [Co(dipy)₃]³⁺ · H₃X^5? · Fe³⁺ heterometal complexes was more difficult than in the free state. The reversible single-electron transfer to the metal ion results in lower binding energy ([Co(dipy)₃]³⁺, ΔΔG ₀ = 3.9 kJ/mol) or in full fast dissociation of the complex (Fe³⁺). The ternary complex in the solution forms the aggregates, in which inner encapsulated Fe(III) and Co(III) ions are not reduced on the electrode. Their quantitative reduction takes place by the relay mechanism of intra- and intermolecular electron transfer through electrochemically generated [Co(dipy)₃]²⁺ outer ions.     

Synthesis of di-substituted calix[4]arene-based receptors for extraction of chromate and arsenate anions

The article describes the synthesis of a family of novel calix[4]arene ionophores, 25,27-bis-(2-aminomethylpyridine-propoxy)-26,28-dihydroxycalix[4]arene (5a), 25,27-bis-(3-aminomethylpyridine-propoxy)-26,28-dihydroxycalix[4]arene (5b) and two chromogenic calix[4]arenes, 5,17-dinitro-25,27-bis-(2-aminomethylpyridine-propoxy)-26,28-dihydroxycalix[4]arene (5c), 5,17-dinitro-25,27-bis-(3-aminomethylpyridine-propoxy)-26,28-dihydroxycalix[4]arene (5d) bearing pyridinium units. In the synthesis, the upper and lower rims of p-tert-butylcalix[4]arene were modified in order to acquire binding sites for the recognition of arsenate and dichromate anions. It has been observed that protonated alkylammonium forms of the ionophores showed high affinity toward dichromate and arsenate anions.     

Molecular design of calixarene-based ion-selective electrodes

In order to obtain insights into relationships between the calix[4]arene structure and the ion selectivity in the electrode system, 20 ionophoric calix[4]arenes were synthesized and their ion selectivity (with Na⁺ as a standard) estimated. Among these ionophoric calix[4]arenes, 25,26,27,28-tetrakis[(ethoxycarbonyl)methoxy]-p-t-octylcalix[4]arene afforded the highest logK _NA,M ^pot value (–3.1) in the presence of 2-fluorophenyl-2-nitrophenylether (10) as the best of 13 plasticizers. This is the first example in which the Na⁺/K⁺ selectivity exceeds a factor of 10³ in the electrode system based on the neutral carrier. The high Na⁺ selectivity is attributed to modification of the upper rim which ostensibly has no relation with the component of the cavity. This paper demonstrates the potential relationships between the unique structure of the calix[4]arene-based ligands and selectivity performance for the design of ion-selective electrodes.     

Spectral,thermal, molecular modeling and biological studies on mono- and binuclear complexes derived from oxalo bis(2,3-butanedionehydrazone)

Background

Hydrazones and their metal complexes were heavily studied due to their pharmacological applications such as antimicrobial, anticonvulsant analgesic, anti-inflammatory and anti-cancer agents. This work aims to synthesize and characterize novel complexes of VO²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Zr⁴⁺and Pd²⁺ ions with oxalo bis(2,3-butanedione-hydrazone). Single crystals of the ligand have been grown and analyzed.

Results

Oxalo bis(2,3-butanedionehydrazone) [OBH] has a monoclinic crystal with P 1 21/n 1 space group. The VO²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Zr⁴⁺ and Pd²⁺ complexes have the formulas: [VO(OBH–H)₂]·H₂O, [Co(OBH)₂Cl]Cl·½EtOH, [Ni₂(OBH)Cl₄]·H₂O·EtOH, [Cu(OBH)₂Cl₂]·2H₂O, [Zn(OBH–H)₂], [Zr(OBH)Cl₄]·2H₂O, and [Pd₂(OBH)(H₂O)₂Cl₄]·2H₂O. All complexes are nonelectrolytes except [Co(OBH)₂Cl]Cl·½EtOH. OBH ligates as: neutral tetradentate (NNOO) in the Ni²⁺ and Pd²⁺ complexes; neutral bidentate (OO) in [Co(OBH)₂Cl]Cl·½EtOH, [Zr(OBH)Cl₄]·2H₂O and [Cu(OBH)₂Cl₂]·2H₂O and monobasic bidentate (OO) in the Zn²⁺ and VO²⁺ complexes. The NMR (¹H and ¹³C) spectra support these data. The results proved a tetrahedral for the Zn²⁺ complex; square-planar for Pd²⁺; mixed stereochemistry for Ni²⁺; square-pyramid for Co²⁺ and VO²⁺ and octahedral for Cu²⁺ and Zr⁴⁺ complexes. The TGA revealed the outer and inner solvents as well as the residual part. The molecular modeling of [Ni₂(OBH)Cl₄]·H₂O·EtOH and [Co(OBH)₂Cl]Cl·½EtOH are drawn and their molecular parameters proved that the presence of two metals stabilized the complex more than the mono metal. The complexes have variable activities against some bacteria and fungi. [Zr(OBH)Cl₄]·2H₂O has the highest activity. [Co(OBH)₂Cl]Cl·½EtOH has more activity against Fusarium.

Conclusion

Oxalo bis(2,3-butanedionehydrazone) structure was proved by X-ray crystallography. It coordinates with some transition metal ions as neutral bidentate; mononegative bidentate and neutral tetradentate. The complexes have tetrahedral, square-planar and/or octahedral structures. The VO²⁺ and Co²⁺ complexes have square-pyramid structure. [Cu(OBH)₂Cl₂]·2H₂O and [Ni₂(OBH)Cl₄]·H₂O·EtOH decomposed to their oxides while [VO(OBH–H)₂]·H₂O to vanadium. The energies obtained from molecular modeling calculation for [Ni₂(OBH)Cl₄]·H₂O·EtOH are less than those for [Co(OBH)₂Cl]Cl·½EtOH indicating the two metals stabilized the complex more than mono metal. The Co(II) complex is polar molecule while the Ni(II) is non-polar.

Graphical abstract

Open image in new window

     

Palladium(II) extraction by sulfur-containing calix[4,6]arenes from hydrochloric acid solutions

The comparison of the extraction properties of calixarenes, thiacalixarenes, and calix[4,6]arene thioethers showed that methyl(thiamethyl)calix[4,6]arenes 3a and 4a have the highest extraction abilities. These extractants rapidly and completely extract palladium from hydrochloric acid solutions; regarding distribution factors achieved in the kinetic mode, they three to four orders of magnitude exceed their monodentate analogue, octylbenzyl sulfide (OBnS). Approaches are considered to enhance palladium extraction via generating mixed palladium species in low-acidity solutions and via intramolecular catalysis by the protonated oxygen atoms of alkoxy groups in the lower rim. For 1 M HCl, the kinetic order of diluent effects on palladium extraction was established. The substitution of sulfur atoms for bridging CH₂ groups was discovered to enhance palladium extraction by calix[4]arene thioether 3c.     

Synthesis and characterization of three novel azocalix[4]arene Schiff base derivatives and their selective copper extraction

The synthesis and characterization of three novel Schiff bases of azocalix[4]arene and their selective copper extraction are described. The preparation of azocalix[4]arenes (1c, 2c and 3c) has been achieved by the condensation of 2-hydroxy-3-methoxybenzaldehyde with the amine group of upper rim mono-, di- and tetra-(aminophenylazo) calix[4]arene in ethanol. The synthesized products (1c, 2c and 3c) are characterized by both ¹H and ¹³C NMR techniques, IR spectroscopy and elemental analysis. Extraction capabilities of interested derivatives of azocalix[4]arene from aqueous phase into organic phase are also examined. While extraction of Ag⁺, Hg⁺ and Hg²⁺ cations gave strong complexes with azo groups, extraction of Cu²⁺ cation is found to be highly effective with ?CCH=N?C and neighboring ?COH groups.     

Design of Organoiron Macromolecules Based on Upper Rim Functionalized Calix[4]arenes

The versatility of cationic cyclopentadienyliron complexes is demonstrated for the generation of calix[4]arene‐based dendrimers and polymers. Dendrimers were prepared from a branched organoiron calix[4]arene through subsequent reactions of azo dyes and organoiron complexes. The resulting azo dye‐containing metallocalix[4]arenes were soluble in polar organic solvents and displayed λ_max ranging between 430 and 456 nm. Upon addition of various acids, the λ_max shifted to higher wavelengths (513–535 nm). In the solid state and in solution, the azo dye‐containing metallocalix[4]arenes reversibly changed colour in the presence of acid and base, indicating their potential use as acid sensors. Cyclic voltammetric studies showed that the iron centres of the metallocalix[4]arenes were reversibly reduced at E_1/2 = −1.49 V. When non‐branching organoiron‐based calix[4]arene were reacted with dithiols, polymers containing calix[4]arenes either in their side chains or main chains were obtained. The polymers possessed weight average molecular weights between 35 000 and 53 000. The polymers were determined to be thermally stable with backbone decomposition occurring above 500 °C.

     

Diester intrabridging of p-tert-butylcalix[8]arene and unexpected formation of the monospirodienone derivative

Reaction of p-tert-butylcalix[8]arene 1 with adipoyl chloride in the presence of NaH as the base yielded singly and doubly intrabridged esters 2-4 and 6. Surprisingly, calix[8]arene monospirodienone derivative 7 was also isolated, which was originated by O₂ oxidation. The conditions of this oxidation were optimized leading to a novel synthetic approach to calixarene monospirodienones based on the O₂/NaH/acyl-chloride oxidizing system. Xantheno calix[8]arenes 8-8a were obtained by rearrangement of 7.     

Utilization of transport efficacy of novel calix[4]arene-embedded polymer inclusion membrane towards trace metals

In this study, 25,27-bis(3-mercaptopropoxyl)-26,28-dihydroxy calix[4]arene was successfully synthesized from the reaction of calix[4]arene-dialkylbromide derivative with thiourea. The structure of 25,27-bis(3-mercaptopropoxyl)-26,28-dihydroxy calix[4]arene was fully characterized using ¹HNMR, ¹³CNMR and elemental analysis techniques. The obtained mercapto-substituted calix[4]arene derivative was employed as an additive material along with cellulose triacetate (CTA) and 2-nitrophenyl octyl ether (o-NPOE) for the preparation of a novel polymer inclusion membrane (C@PIM). The structure and surface morphology of mercapto-substituted calix[4]arene-embedded polymer inclusion membrane was determined using thermogravimetric analysis, scanning electron microscopy and elemental analysis techniques. Donnan dialysis system was also used to assess the transport efficacy of C@PIM towards Pb(II), Zn(II), Cu(II), Ni(II), Cd(II) and Co(II) ions. The results show that new C@PIM exhibited 99% transport efficacy but also selectivity toward Ni(II) and other ions.     

Quantum chemical study of the self-assembly of tetrathiacalix[4]arenes and their oxygen analogs functionalized by hydrazide groups

The self-assembly of tetrathiacalix[4]arene and tetraoxacalix[4]arene molecules functionalized by hydrazide groups was studied by DFT calculations at B3LYP/6-31G(d,p) level. The calculations were performed for the cone and 1,3-alternate conformations. The associates of calix[4]arenes in the cone conformation are stabilized by multiple hydrogen bonds with inclusion of all hydrazide groups in the formation of the globule, which suppresses the formation of extended structures.     

Synthesis and characterization of azocalix[4]arene ester and ketone derivatives incorporated in a polymeric backbone with bisphenol-A and their cation-binding properties

This study comprises synthesis and characterization of azocalix[4]arene compounds having copolymeric structures. The novel bisazocalixphenol-A and copolymer containing pendant azocalix[4]arene units with ester (5) and ketone (6) functionalities at their lower rim have been synthesized via diazo-coupling reaction. The phase transfer study is performed by liquid?Cliquid extraction method. It has been deduced from the observations that their precursors 25,26,27-tribenzoyloxy-28-hydroxy-5-(4-aminophenylazo)calix[4] arene (3), 25,27-diacetoniloxy-26,28-dihydroxy-5,17-(4-aminophenylazo)calix[4]arene (4) and bisazocalixphenol-A (5) show a good phase transfer affinity towards selected transition metal cations, unlike copolymer (6). These compounds are studied by the selective extraction of Fe³⁺ cation from the aqueous phase into the organic phase and it is carried out using compounds 1?C6. It is observed that the reduced azocalix[4]arene 4 is the most efficient (82.93?%) carrier of all compounds (3?C6) in the extraction of Fe³⁺ at pH 5.4.