Tuning the Electronic Nature of Mono‐Bay Alkynyl–Phenyl‐Substituted Perylene Bisimides: Synthesis,Structure, and Photophysical Properties

Perylene bisimide (PBI) derivatives with various alkynyl–phenyl substituents at a single bay position have been synthesised by Sonogashira coupling. NMR spectroscopic studies reveal the unsymmetric nature of the dyads. All of the dyads undergo two reversible reductions, which demonstrates their structural and electrochemical rigidity. The synthesised dyads show a remarkable redshift in their absorption maxima and sharp vibronic progression. Electron‐rich substituents facilitate efficient charge transfer from the substituent HOMO to the electron‐deficient PBI core. The most interesting spectral signatures were exhibited by a PBI with a strongly electron‐donating ethynyl(dimethylaminophenyl) substituent. The steady‐state features of this PBI showed a broad absorption that covered almost the whole visible region with no emission. A twisted intramolecular charge‐transfer (TICT) process, related to the rotational motion of ethynyl(dimethylaminophenyl) PBI, was also demonstrated. Computational investigations shed light on the coplanarity of the various substituents with respect to the PBI core; the PBI core itself remains flat without any noticeable deformation even after mono‐functionalisation. This illustrates that mono‐functionalisation exerts meagre steric hindrance on the bay positions relative to disubstituted analogues. Despite several previous reports on the structural characterisation of 1,7‐disubstituted PBI derivatives, we present the first structural characterisation of a mono‐bay ethynyl‐phenyl substituted PBI. The solid‐state structure of the phenyl derivative has a flat PBI core without any noticeable steric constraints from the substituents, as predicted. In contrast, single‐crystal X‐ray analysis for the mono‐bromo bay‐substituted PBI shows that the bromine substituent is not in the plane of the PBI core.     

Carbonate Linkage Bearing Naphthalenediimides: Self‐Assembly and Photophysical Properties

Self‐assembly of carbonate linkage bearing naphthalene diimides (NDI) showed unusually red‐shifted excimer emission at approximately 560 nm. On the other hand, the ether linkers showed usual excimers at around 520 nm, highlighting the role of the carbonate group in tuning the molecular organization and the resultant photophysical properties of NDI.     

A Single 2‐(2′‐Hydroxyphenyl)benzothiazole Derivative Can Achieve Pure White‐Light Emission

The synthesis and photophysics of two novel 2‐(2′‐hydroxyphenyl)benzothiazole (HBT) derivatives are presented. The electron‐withdrawing trifluoromethyl (CF₃) group in compound 1 facilitates the deprotonation of the phenolic hydroxy group. Well‐resolved triple fluorescence from the enol, keto, and phenolic anion, which ranges from 350 to 600 nm, was detected for 1 in ethanol, which marks the first time triple fluorescence from an excited‐state intramolecular proton transfer (ESIPT) molecule has been reported. Both triphenylamine and CF₃ were introduced into derivative 2 . Intramolecular charge transfer and the “red‐edge effect” resulted in the bathochromic shift of dual fluorescence of 2 . Triple fluorescence was also observed for 2 in ethanol. In mixed acetonitrile and ethanol, pure white‐light emission with CIE coordinates of (0.33, 0.33) and a quantum yield of 0.25 was achieved for 2 . This work provides a new avenue for the rational design of an ESIPT molecule to achieve white‐light generation under mild conditions.     

Charge‐Transfer‐Assisted Supramolecular 1 D Nanofibers through a Cholesteric Structure‐Directing Agent: Self‐Assembly Design for Supramolecular Optoelectronic Materials

Self‐assembly of pyrene butyric acid (PBA) and 2,4,7‐trinitro‐9H‐fluoren‐9‐one (TNF) directed by a pyridine‐linked cholesterol unit resulted in the formation of a conducting material (1.9472×10^?4 S Cm^?1) due to the formation of 1 D nanofibers. X‐ray diffraction, IR, and atomic force microscopic (AFM) techniques were used to establish the mechanism of the self‐assembly of the multicomponent gels. Results indicate efficient charge transfer in the 1 D nanofibers, assisted by hydrogen bonding.     

Localization/Delocalization of Charges in Bay‐Linked Perylene Bisimides

The copper‐mediated Ullmann coupling of 1,7‐dibromoperylene bisimides afforded structurally perfect singly‐linked perylene bisimide (PBI) arrays, whilst the homo‐coupling of 1,12‐dibromoperylene bisimides gave doubly‐linked and triply‐linked diperylene bisimides. The interactions of three bay‐linked diperylene bisimides that differed in their linkage (singly, doubly, and triply) were investigated in their neutral and reduced forms (mono‐anion to tetra‐anion). UV/Vis absorption and fluorescence spectroscopy revealed different degrees of interaction, which was explained by exciton coupling and conjugation effects. The electrochemical properties and spectroelectrochemistry also showed quite‐different degrees of PBI interactions in the reduced mixed‐valence species, which was apparent by the observation of CT bands. The interpretation of the experimental findings was supported by spin‐restricted and ‐unrestricted DFT and time‐dependent TD‐DFT calculations with the long‐range‐corrected CAM‐B3LYP functional. Accordingly, the degree of interaction in both the neutral and reduced forms of the bay‐linked PBIs was qualitatively in the order doubly linked<singly linked?triply linked, owing to the different degrees of twisting and flexibility between the two PBIs moieties. Only triply linked diPBI showed completely delocalized wavefunctions over the entire π‐system.     

Synthetic Control of Spectroscopic and Photophysical Properties of Triarylborane Derivatives Having Peripheral Electron‐Donating Groups

The spectroscopic and photophysical properties of triarylborane derivatives were controlled by the nature of the triarylborane core (trixylyl‐ or trianthrylborane) and peripheral electron‐donating groups (N,N‐diphenylamino or 9H‐carbazolyl groups). The triarylborane derivatives with and without the electron‐donating groups showed intramolecular charge‐transfer absorption/fluorescence transitions between the π orbital of the aryl group (π(aryl)) and the vacant p orbital on the boron atom (p(B), π(aryl)–p(B) CT), and the fluorescence color was tunable from blue to red by the combination of peripheral electron‐donating groups and a triarylborane core. Detailed electrochemical, spectroscopic, and photophysical studies of the derivatives, including solvent dependences of the spectroscopic and photophysical properties, demonstrated that the HOMO and LUMO of each derivative were determined primarily by the nature of the peripheral electron‐donating group and the triarylborane core, respectively. The effects of solvent polarity on the fluorescence quantum yield and lifetime of the derivatives were also tunable by the choice of the triarylborane core.     

Versatile Photophysical Properties of meso‐Aryl‐Substituted Subporphyrins: Dipolar and Octupolar Charge‐Transfer Interactions

Donor–acceptor systems based on subporphyrins with nitro and amino substituents at meta and para positions of the meso‐phenyl groups were synthesized and their photophysical properties have been systematically investigated. These molecules show two types of charge‐transfer interactions, that is, from center to periphery and periphery to center depending on the peripheral substitution, in which the subporphyrin moiety plays a dual role as both donor and acceptor. Based on the solvent‐polarity‐dependent photophysical properties, we have shown that the fluorescence emission of para isomers originates from the solvatochromic, dipolar, symmetry‐broken, and relaxed excited states, whereas the non‐solvatochromic fluorescence of meta isomers is of the octupolar type with false symmetry breaking. The restricted meso‐(4‐aminophenyl) rotation at low temperature prevents the intramolecular charge‐transfer (ICT)‐forming process. The two‐photon absorption (TPA) cross‐section values were determined by photoexcitation at 800 nm in nonpolar toluene and polar acetonitrile solvents to see the effect of ICT on the TPA processes. The large enhancement in the TPA cross‐section value of approximately 3200 GM (1 GM=10^?50 cm⁴ s photon^?1) with donor–acceptor substitution has been attributed to the octupolar effect and ICT interactions. A correlation was found between the electron‐donating/‐withdrawing abilities of the peripheral groups and the TPA cross‐section values, that is, p‐aminophenyl>m‐aminophenyl>nitrophenyl. The increased stability of octupolar ICT interactions in highly polar solvents enhances the TPA cross‐section value by a factor of approximately 2 and 4, respectively, for p‐amino‐ and m‐nitrophenyl‐substituted subporphyrins. On the other hand, the stabilization of the symmetry‐broken, dipolar ICT state gives rise to a negligible impact on the TPA processes.     

Self‐Assembly of Tetraphenylalanine Peptides

Three different tetraphenylalanine (FFFF) based peptides that differ at the N‐ and C‐termini have been synthesized by using standard procedures to study their ability to form different nanoassemblies under a variety of conditions. The FFFF peptide assembles into nanotubes that show more structural imperfections at the surface than those formed by the diphenylalanine (FF) peptide under the same conditions. Periodic DFT calculations (M06L functional) were used to propose a model that consists of three FFFF molecules defining a ring through head‐to‐tail NH₃⁺???^?OOC interactions, which in turn stack to produce deformed channels with internal diameters between 12 and 16 Å. Depending on the experimental conditions used for the peptide incubation, N‐fluorenylmethoxycarbonyl (Fmoc) protected FFFF self‐assembles into a variety of polymorphs: ultra‐thin nanoplates, fibrils, and star‐like submicrometric aggregates. DFT calculations indicate that Fmoc‐FFFF prefers a parallel rather than an antiparallel β‐sheet assembly. Finally, coexisting multiple assemblies (up to three) were observed for Fmoc‐FFFF‐OBzl (OBzl = benzyl ester), which incorporates aromatic protecting groups at the two peptide terminals. This unusual and noticeable feature is attributed to the fact that the assemblies obtained by combining the Fmoc and OBzl groups contained in the peptide are isoenergetic.     

Synthesis of Functionalized Mono‐, Bis‐, and Trisethynyltriptycenes for One‐Dimensional Self‐Assembly on Surfaces

This paper describes the synthesis of triptycene‐based building blocks that are able to interact through hydrogen bonds to form one‐dimensional self‐assembled motifs on surfaces. We designed 9,10‐diethynyltriptycene derivatives functionalized at the ethynyl end groups by a variety of hydrogen‐bonding groups for homomolecular recognition and complementary building blocks for heteromolecular recognition. We also present the synthesis of bis‐ and trisethynyltriptycenes with terminal alkyne functional groups available for on‐surface azide–alkyne cycloaddition reaction to expand the potential of the triptycene building block.     

Self‐Assembly of Carboxylic Acid Appended Naphthalene Diimide Derivatives with Tunable Luminescent Color and Electrical Conductivity

Self‐assembly of a series of carboxylic acid‐functionalized naphthalene diimide (NDI) chromophores with a varying number (n=1–4) of methylene spacers between the NDI ring and the carboxylic acid group has been studied. The derivatives show pronounced aggregation due to the synergistic effects of H‐bonding between the carboxylic acid groups in a syn–syn catemer motif and π stacking between the NDI chromophores. Solvent‐dependent UV/Vis studies reveal the existence of monomeric dye molecules in a “good” solvent such as chloroform and self‐assembly in “bad” solvents such as methylcyclohexane. The propensity of self‐assembly is comparable for all samples. Temperature‐dependent spectroscopic studies show high thermal stability of the H‐bonding‐mediated self‐assembled structures. In the presence of a protic solvent such as MeOH, self‐assembly can be suppressed, suggesting a decisive role of H‐bonding, whereas π stacking is more a consequence of than a cause for self‐assembly. Syn–syn catemer‐type H‐bonding is supported by powder XRD studies and the results corroborate well with DFT calculations. The morphology as determined by AFM is found to be dependent on the value of n; with increasing n, the morphology gradually shifts from 2D nanosheets to 1D nanofibers. Emission spectra show sharp emission bands with relatively small Stokes shifts. In addition, a rather broad emission band is observed at longer wavelengths because of the in situ formation of excimer‐type species. Due to such a heterogeneous nature, the emission spectrum spans almost the entire red–green–blue region. Depending on the value of n, the ratio of intensities of the two emission bands is changed, which results in a tunable luminescent color. Furthermore, in the case of n=1 and 3, almost pure white light emission is observed. Time‐resolved photoluminescence spectra show a very short lifetime (a few picoseconds) of monomeric dye molecules and biexponential decays with longer lifetimes (on the order of nanoseconds) for aggregated species. Current–voltage measurements show electrical conductivity in the range of 10^?4 S cm^?1 for the aggregated chromophores, which is four orders of magnitude higher than the value for a structurally similar NDI control molecule lacking the H‐bonding functionality.     

Influence of Hydrogen Bonds and Nonspecific Interactions on the Spectral and Photophysical Properties of the Excited Singlet States of 4‐Aminophthalimide in Amine Solution

The hydrogen‐bond and nonspecific interaction energies for 4‐aminophthalimide (4‐AP), often used as a probe, in the ground electronic and excited singlet states are determined using ab initio computational methods. It is shown that the 4‐AP molecule can form three relatively strong hydrogen bonds with trimethylamine (TMA) and triethylamine (TEA), which leads to the formation of S₀‐complexes between the solute and solvent molecules. Only two of the hydrogen bonds with the amine group of 4‐AP change significantly their energies upon excitation and deactivation. The theoretical results are necessary to explain the spectral and unusual photophysical properties of 4‐AP in amine solutions.     

Dithienophosphole‐Based Phosphinamides with Intriguing Self‐Assembly Behavior

A new, highly adaptable type of phosphinamide‐based hydrogen bonding is representatively demonstrated in π‐conjugated phosphole materials. The rotational flexibility of these intermolecular P=O?H?N hydrogen bonds is demonstrated by X‐ray crystallography and variable‐concentration NMR spectroscopy. In addition to crystalline compounds, phosphinamide hydrogen bonding was successfully introduced into the self‐assembly of soft crystals, liquid crystals, and organogels, thus highlighting the high general value of this type of interaction for the formation of organic soft materials.     

Synthesis,Photophysics, and Self‐Assembly of Furan‐Embedded Heteroarenes

A series of pyrene/phenanthrene‐fused furan derivatives ( 1 – 8 ) were synthesized by a simple condensation reaction between pyrene‐4,5‐diketone/phenanthrenequinone and substituted phenol/naphthol in the presence of trifluoromethanesulfonic acid in 1,2‐dichlorobenzene heated at reflux. The formed compounds can emit strong blue light in organic solvents. Additionally, the self‐assembly behaviors of two of the compounds ( 3 and 5 ) were studied through re‐precipitation method and the resulting nanostructures were characterized by UV/Vis, fluorescence spectra, and field‐emission scanning electron microscopy (FESEM). The findings showed that the shape and size of compounds 3 and 5 could be tuned by the ratio of THF and hexadecyl trimethyl ammonium bromide (CTAB) solution in water.     

Pi‐Extended Diindole‐Fused Azapentacenone: Synthesis,Characterization, and Photophysical and Lithium‐Storage Properties

Pi ‐extended polyaromatics tend to exhibit improved electronic properties with respect to the intrinsic structures. Herein, the rational design of a π‐extended diindole‐fused diazapentacenone ( IP ), with a nine‐ring‐fused core, obtained by applying an intramolecular Friedel–Crafts diacylation synthetic routine, is reported. The chemical structure, physical properties, and morphology of IP were fully characterized. Serving as an organic cathode material for a lithium‐ion battery, the as‐prepared nanorods of π‐extended IP display higher conductivity and superior electrochemical performance than those of the naked diazapentacenone without diindole fusion.     

Arginine‐Substituted Phthalocyanine with Concentration‐Driven Self‐Disaggregation Performance: Synthesis,Properties and Mechanistic Study

An arginine‐substituted zinc phthalocyanine (ArgZnPc) capable of disaggregating at high concentrations in polar non‐aqueous solvents through concentration‐driven hydrogen bond type transformation has been prepared. The ArgZnPc was prepared through a guanidine‐meditated self‐catalytic ester hydrolysis reaction. The concentration‐driven disaggregation of ArgZnPc was confirmed by UV‐Vis absorption spectra, fluorescence emission spectra and lifetimes, and singlet oxygen quantum yield data.     

Comparative Electrochemical and Photophysical Studies of Tetrathiafulvalene‐Annulated Porphyrins and Their ZnII Complexes: The Effect of Metalation and Structural Variation

A series of tetrathiafulvalene (TTF)‐annulated porphyrins, and their corresponding Zn^II complexes, have been synthesized. Detailed electrochemical, photophysical, and theoretical studies reveal the effects of intramolecular charge‐transfer transitions that originate from the TTF fragments to the macrocyclic core. The incremental synthetic addition of TTF moieties to the porphyrin core makes the species more susceptible to these charge‐transfer (CT) effects as evidenced by spectroscopic studies. On the other hand, regular positive shifts in the reduction signals are seen in the square‐wave voltammograms as the number of TTF subunits increases. Structural studies that involve the tetrakis‐substituted TTF–porphyrin (both free‐base and Zn^II complex) reveal only modest deviations from planarity. The effect of TTF substitution is thus ascribed to electronic overlap between annulated TTF subunits rather than steric effects. The directly linked thiafulvalene subunits function as both π acceptors as well as σ donors. Whereas σ donation accounts for the substituent‐dependent charge‐transfer transitions, it is the π‐acceptor nature of the appended tetrathiafulvalene groups that dominates the redox chemistry. Interactions between the subunits are also reflected in the square‐wave voltammograms. In the case of the free‐base derivatives that bear multiple TTF subunits, the neighboring TTF units, as well as the TTF ^{? +} generated through one‐electron oxidation, can interact with each other; this gives rise to multiple signals in the square‐wave voltammograms. On the other hand, after metalation, the electronic communication between the separate TTF moieties becomes restricted and they act as separate redox centers under conditions of oxidation. Thus only two signals, which correspond to TTF ^{. +} and TTF²⁺, are observed. The reduction potentials are also seen to shift towards more negative values after metalation, a finding that is considered to reflect an increased HOMO–LUMO gap. To probe the excited‐state dynamics and internal CT character, transient absorption spectral studies were performed. These analyses revealed that all the TTF–porphyrins of this study display relatively short excited‐state lifetimes, which range from 1 to 20 ps. This reflects a very fast decay to the ground state and is consistent with the proposed intramolecular charge‐transfer effects inferred from the ground‐state studies. Complementary DFT calculations provide a mechanistic rationale for the electron flow within the TTF–porphyrins and support the proposed intramolecular charge‐transfer interactions and π‐acceptor effects.     

Hydrogen‐Bond‐Guided Self‐Assembly of Nucleotides on a Receptor‐Array Surface

The hydrogen‐bond‐guided self‐assembly of 5′‐ribonucleotides bearing adenine(A), cytosine (C), uracil (U), or guanine (G) bases from aqueous solution on a lipid‐like surface decorated with synthetic bis(Zn^II–cyclen) (cyclen=1,4,7,10‐tetraazacyclodododecane) metal–complex receptor sites is described. The process was studied by using surface plasmon resonance spectroscopy. The data show that the mechanism of nucleotide binding to the 2D template is influenced by the chemistry of the bases and the pH value of the solution. In a neutral solution of pH 7.5, the process is cooperative and selective with respect to Watson–Crick pairs (A–U and C–G), which form stable double planes in accordance with the Chargaff rule. In a more acidic solution at pH 6.0, the interactions between complementary partners become non‐cooperative and the surface also stabilizes mismatched and wobble pairs due to the pH‐induced changes in the receptor coordination state. The results suggest that hydrogen bonding plays a key role in the self‐assembly of complementary nucleotides at the lipid‐like interface, and the cooperative character of the process stems from the ideal matching of the orientation and chemistry of all the interacting components with respect to each other in neutral solution.     

Self‐Assembly of a Highly Organized,Hexameric Supramolecular Architecture: Formation,Structure and Properties

Two derivatives, ³ L and ⁹ L , of a ditopic, multiply hydrogen‐bonding molecule, known for more than a decade, have been found, in the solid state as well as in solvents of low polarity at room temperature, to exist not as monomers, but to undergo a remarkable self‐assembly into a complex supramolecular species. The solid‐state molecular structure of ³ L , determined by single‐crystal X‐ray crystallography, revealed that it forms a highly organized hexameric entity ³ L ₆ with a capsular shape, resulting from the interlocking of two sets of three monomolecular components, linked through hydrogen‐bonding interactions. The complicated ¹H NMR spectra observed in o‐dichlorobenzene (o‐DCB) for ³ L and ⁹ L are consistent with the presence of a hexamer of D₃ symmetry in both cases. DOSY measurements confirm the hexameric constitution in solution. In contrast, in a hydrogen‐bond‐disrupting solvent, such as DMSO, the ¹H NMR spectra are very simple and consistent with the presence of isolated monomers only. Extensive temperature‐dependent ¹H NMR studies in o‐DCB showed that the L ₆ species dissociated progressively into the monomeric unit on increasing th temperature, up to complete dissociation at about 90 °C. The coexistence of the hexamer and the monomer indicated that exchange was slow on the NMR timescale. Remarkably, no species other than hexamer and monomer were detected in the equilibrating mixtures. The relative amounts of each entity showed a reversible sigmoidal variation with temperature, indicating that the assembly proceeded with positive cooperativity. A full thermodynamic analysis has been applied to the data.     

Self‐Assembly of Coronene Bisimides: Mechanistic Insight and Chiral Amplification

The study of the organization of small π‐conjugated molecules is imperative to understanding and controlling its properties for various applications. Coronene bisimides (CBIs) are potential candidates for novel liquid‐crystalline materials and active n‐type semiconductor molecules in organic electronics. To understand the self‐assembly of this seldom‐studied chromophore, we have designed two derivatives of CBIs bearing chiral and achiral 3,4,5‐trialkoxyphenyl groups at the imide position, named as CBI‐GCH and CBI‐GACH , respectively. CBI‐GCH self‐assembles mainly through π‐stacking and van der Waals interactions in nonpolar methylcyclohexane to result in long 1D fibrillar stacks. The mechanism of supramolecular polymerization was probed by using chiroptical studies, which showed an isodesmic pathway for CBI‐GCH . The thermodynamic parameters that govern the self‐assembly are detailed. CBI‐GACH also shows similar self‐assembly behavior as its chiral counterpart. X‐ray diffraction studies of both molecules reveals a 2D hexagonal columnar arrangement. The coassembly of CBI‐GCH and CBI‐GACH shows chiral amplification (sergeant and soldiers experiment) with saturation at 30–50 % of the chiral derivative, which was further used to study the dynamics of the assembly. Thus, this study presents a rare report of chiral amplification in an isodesmic system.