Steric and electronic contributions to barriers of internal rotation in 1,8-dibenzoylnaphthalenes

Restricted rotation about the naphthalenylcarbonyl bonds in the title compounds resulted in mixtures of cis and trans rotamers, the equilibrium and the rotational barriers depending on the substituents. For 2,7-dimethyl-1,8-di-(p-toluoyl)-naphthalene (1) ΔH° = 3.66 ± 0.14 kJ mol^?1, ΔS° = 1.67 ± 0.63 J mol^?1 K^?1, ΔH^≠_ct = 55.5 ± 1.3 kJ mol^?1, ΔH^≠_ct = 51.9 ± 1.3 kJ mol^?1, ΔS^≠_ct = ?41.3±4.1 J mol^?1 K^?1 and ΔS^≠_ct = ?42.9±4.1 J mol^?1 K^?1. The rotation about the phenylcarbonyl bond requires ΔH^≠ = ?56.9±4.4 kJ mol^?1 and ΔS^≠ = ?20.5±15.3 J mol^?1 K^?1 for the cis rotamer, and ΔH^≠ = 43.5Δ0.4 kJ mol^?1 and ΔS^≠ =± ?22.4Δ1.3 J mol^?1 K^?1 for the trans rotamer. The role of electronic factors is likely to be virtually the same for both these rotamers but steric interaction between the two phenyl rings occurs in the cis rotamer only. Hence, the difference of the activation enthalpies obtained for the cis and trans rotamers, ΔΔH^?1 = 13.4 kJ mol^?1, provides a basis for the estimation of the role of steric factors in this rotation. For the tetracarboxylic acid 2 and its tetramethyl ester 3 the equilibrium is even more shifted towards the trans form because of enhanced steric and electrostatic interactions between the substituents in the cis form. The barriers for the rotation around the phenylcarbonyl bond and the cis-trans isomerization are lowered; an explanation for this result is presented.     

Synthesis,structure, and kinetic studies on [RuCl2(NCCH3)2(cod)]

[RuCl₂(NCCH₃)₂(cod)], an alternative starting material to [RuCl₂(cod)] _n for the preparation of ruthenium(II) complexes, has been prepared from the polymer compound and isolated in yields up to 87% using a new work-up procedure. The compound has been obtained as a yellow solid without water of crystallization. The complexes [RuCl₂(NCR)₂(cod)] spontaneously transform into dimers [Ru₂Cl(μ-Cl)₃(cod)₂(NCR)] (R?=?Me, Ph). ¹H NMR kinetic experiments for these transformations evidenced first-order behavior. [RuCl₂(NCPh)₂(cod)] dimerizes slower by a factor of ten than [RuCl₂(NCCH₃)₂(cod)]. The following activation parameters, ΔH ^#?=?114?±?3?kJ?mol^?1 and ΔS ^#?=?66?±?9?J?K^?1?mol^?1 for R?=?CH₃CN (ΔG ^#?=?94?±?5?kJ?mol^?1, 298.15?K) and ΔH ^#?=?122?±?2?kJ?mol^?1 and ΔS ^#?=?75?±?6?J?K^?1?mol^?1 for R?=?Ph (ΔG ^#?=?100?±?4?kJ?mol^?1, 298.15?K), have been calculated from the first-order rate constants in the temperature range 294–323?K. The kinetic parameters are in agreement with a two-step mechanism with dissociation of acetonitrile as the rate-determining step. The molecular structures of [Ru₂Cl(μ-Cl)₃(cod)₂(NCR)] (R?=?Me, Ph) have been determined by X-ray diffraction.     

Kinetics of dehydrohalogenation of N-chloro-3-azabicyclo[3,3,0]octane in alkaline medium. NMR and ES/MS evidence of the dimerization of 3-azabicyclo[3,3,0]oct-2-ene

The formation of 3-azabicyclo[3,3,0]oct-2-ene in the course of the synthesis of N-amino-3-azabicyclo[3,3,0]octane using the Raschig process results from the following two consecutive reactions: chlorine transfer between the monochloramine and the 3-azabicyclo[3,3,0]octane followed by a dehydrohalogenation of the substituted haloamine. The kinetics of the reaction were studied by HPLC and UV as a function of temperature (15 to 44°C), and the concentrations of NaOH (0.1 to 1 M) and the chlorinated derivative (1 to 4×10⁻³ M). The reaction is bimolecular (k=103×10⁻⁶ M⁻¹ s⁻¹; ΔH^0#=89 kJ mol⁻¹; and ΔS^0#=−33.6 J mol⁻¹ K⁻¹) and has an E2 mechanism. The spectral data of 3-azabicyclo[3,3,0]oct-2-ene were determined. IR, NMR, and ES/MS analysis show dimerization of the water-soluble monomer into a white insoluble dimer. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet: 30: 129–136, 1998.     

Kinetic study of the ligand substitution on the trimethylplatinum(iv) complexes with unidentate ligands

Ligand substitution kinetics for the reaction [Pt^IVMe₃(X)(NN)]+NaY=[Pt^IVMe₃(Y)(NN)]+NaX, where NN=bipy or phen, X=MeO⁻, CH₃COO⁻, or HCOO⁻, and Y=SCN⁻ or N₃⁻, has been studied in methanol at various temperatures. The kinetic parameters for the reaction are as follows. The reaction of [PtMe₃(OMe)(phen)] with NaSCN: k₁=36.1±10.0 s⁻¹; ΔH₁^≠=65.9±14.2 kJ mol⁻¹; ΔS₁^≠=6±47 J mol⁻¹ K⁻¹; k₋₂=0.0355±0.0034 s⁻¹; ΔH₋₂^≠=63.8±1.1 kJ mol⁻¹; ΔS₋₂^≠=−58.8±3.6 J mol⁻¹ K⁻¹; and k₋₁/k₂=148±19. The reaction of [PtMe₃(OAc)(bipy)] with NaN₃: k₁=26.2±0.1 s⁻¹; ΔH₁^≠=60.5±6.6 kJ mol⁻¹; ΔS₁^≠=−14±22 J mol⁻¹K⁻¹; k₋₂=0.134±0.081 s⁻¹; ΔH₋₂^≠=74.1±24.3 kJ mol⁻¹; ΔS₋₂^≠=−10±82 J mol⁻¹K⁻¹; and k₋₁/k₂=0.479±0.012. The reaction of [PtMe₃(OAc)(bipy)] with NaSCN: k₁=26.4±0.3 s⁻¹; ΔH₁^≠=59.6±6.7 kJ mol⁻¹; ΔS₁^≠=−17±23 J mol⁻¹K⁻¹; k₋₂=0.174±0.200 s⁻¹; ΔH₋₂^≠=62.7±10.3 kJ mol⁻¹; ΔS₋₂^≠=−48±35 J mol⁻¹K⁻¹; and k₋₁/k₂=1.01±0.08. The reaction of [PtMe₃(OOCH)(bipy)] with NaN₃: k₁=36.8±0.3 s⁻¹; ΔH₁^≠=66.4±4.7 kJ mol⁻¹; ΔS₁^≠=7±16 J mol⁻¹K⁻¹; k₋₂=0.164±0.076 s⁻¹; ΔH₋₂^≠=47.0±18.1 kJ mol⁻¹; ΔS₋₂^≠=−101±61 J mol⁻¹ K⁻¹; and k₋₁/k₂=5.90±0.18. The reaction of [PtMe₃(OOCH)(bipy)] with NaSCN: k₁ =33.5±0.2 s⁻¹; ΔH₁^≠=58.0±0.4 kJ mol⁻¹; ΔS₁^≠=−20.5±1.6 J mol⁻¹ K⁻¹; k₋₂=0.222±0.083 s⁻¹; ΔH₋₂^≠=54.9±6.3 kJ mol⁻¹; ΔS₋₂^≠=−73.0±21.3 J mol⁻¹ K⁻¹; and k₋₁/k₂=12.0±0.3. Conditional pseudo-first-order rate constant k₀ increased linearly with the concentration of NaY, while it decreased drastically with the concentration of NaX. Some plausible mechanisms were examined, and the following mechanism was proposed. [Note to reader: Please see article pdf to view this scheme.] © 1998 John Wiley & Sons, Inc. Int J Chem Kinet 30: 523–532, 1998     

Heat capacity of polynuclear Fe(HTrz)3(B10H10)·H2O and trinuclear [Fe3(PrTrz)6(ReO4)4(H2O)2](ReO4)2 complexes (HTrz=1,2,4-triazole, PrTrz=4-propyl-1,2,4-triazole) manifesting 1A1⇔5T2 spin transition

Low-temperature heat capacity of polynuclear Fe(HTrz)₃(B₁₀H₁₀)·H₂O (I) and trinuclear [Fe₃(PrTrz)₆(ReO₄)₄(H₂O)₂](ReO₄)₂ (II) spin crossover coordination compounds was measured in 80–300 K temperature range using a vacuum adiabatic calorimeter. For I, an anomaly of heat capacity with a maximum at T _trs=234.5 K (heating mode) was observed, Δ_trs H=10.1±0.2 kJ mol^?1 Δ_trs S=43.0±0.8 J mol^? K^?1. For II, a smooth anomaly between 150 and 230 K was found, Δ_trs H=2.5±0.25 kJ mol^?1 Δ_trs S=13.6±1.4 J mol^? K^?1. Anomalies observed in both compounds correspond to ¹A₁?⁵T₂ spin transition.     

Preparation and temperature-dependent enantioselectivities of homochiral phenolic crown ethers having aryl chiral barriers: thermodynamic parameters for enantioselective complexation with chiral amines

Homochiral crown ether (S,S)-1 containing 1-naphthyl groups as chiral barriers together with the phenol moiety was prepared by using (S)-3 as a chiral subunit which was resolved in enantiomerically pure form by lipase-catalyzed enantioselective acylation of (±)-3. Homochiral phenolic crown ether (S,S)-2, containing phenyl groups as chiral barriers, was also prepared from (S)-5 which was derived from (S)-mandelic acid. The association constants for their complexes with chiral amines in CHCl₃ were determined at various temperatures by the UV–visible spectroscopic method demonstrating that the crown ethers (S,S)-1 and (S,S)-2 displayed the large Δ_R−SΔG values of 6.2 and 6.4 kJ mol⁻¹, respectively, towards the amine 21 at 15°C. Thermodynamic parameters for complex formation were also determined and a linear correlation between TΔ_R−SΔS and Δ_R−SΔH values was observed.     

The kinetics and thermodynamics of a novel efficient mixed water–1,4-dioxan solvent for the effective complexation of a neutral ruthenium complex with carbon monoxide at atmospheric pressure

Kinetic and thermodynamic investigations were performed for a mixed aqueous-organic, 1:1 (v/v) water–1,4-dioxane medium, which was found to be an efficient solvent for the interaction of a neutral dichlorotris(triphenylphosphine) ruthenium(II), RuCl₂(PPh₃)₃ complex with carbon monoxide at atmospheric pressure. During the interaction, RuCl₂(PPh₃)₃ dissociates to a neutral complex dichlorobis(triphenylphosphine) ruthenium(II), RuCl₂(PPh₃)₂, by losing a coordinated PPh₃ ligand and RuCl₂(PPh₃)₂ coordinates with CO to form an in situ carbonyl complex RuCl₂(CO)(PPh₃)₂. The in situ formed carbonyl complex RuCl₂(CO)(PPh₃)₂ was thoroughly characterized by equilibrium, spectrophotometric, IR, and electrochemical techniques. Under equilibrium conditions, the rate and dissociation constants for the dissociation of PPh₃ from RuCl₂(PPh₃)₃ were found to be favorable for the formation of the carbonyl complex RuCl₂(CO)(PPh₃)₂. The rates of complexation for the formation of RuCl₂(CO)(PPh₃)₂ were found to follow an overall second-order kinetics being first order in terms of the concentrations of both carbon monoxide and RuCl₂(PPh₃)₂. The determined activation parameters corresponding to the rate constant (ΔH^# = 35.9 ± 2.5 kJ mol⁻¹ and ΔS^# = −122 ± 6 J K⁻¹ mol⁻¹) and thermodynamic parameters corresponding to the formation constant (ΔH° = −33.5 ± 4.5 kJ mol⁻¹, ΔS° = −25 ± 8 J K⁻¹ mol⁻¹, and ΔG° = −25.7 ± 2.0 kJ mol⁻¹) were found to be highly favorable for the formation of the complex RuCl2(CO)(PPh3)2. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 40: 359–369, 2008     

Conformational equilibria in N-chloropiperidines

Nitrogen inversion equilibria in the anancomeric piperidines 3–6, 8 and 9 have been studied by variable temperature ¹H NMR in order to determine free energy differences ΔG_e→a⁰ for one class of N-substituted piperidines by an unequivocal method, i.e. direct integration of separate NMR signals for conformers whose interconversion is slow on the NMR timescale at an easily accessible temperature. Using 6 as a model ΔG_e→a⁰ (N-chloropiperidine) has been found to be 5·3±0·1 kJ mol^-1 at 193 K; similarly a study of 10 leads to ΔG_e→a⁰ (N-chloromorpholine) = 4·2±0·1 kJ mol^-1 at 203 K.     

The low-temperature quartz resonator method for determination of the enthalpy of sublimation

A low-temperature quartz resonator method for determining the enthalpy of sublimation has been described. A quartz crystal cooled to the temperature of liquid nitrogen becomes a sensitive microbalance. The method permits the value of ΔH_sub to be obtained within 4–5 h and is especially useful in measuring ΔH_sub values of substances with low saturated vapour pressures. The following values of ΔH_sub were received for standard substances: benzoic acid, ΔH_sub = (90.8±0.6) kJ mol^?1 at 293–319 K: naphthalene, ΔH_sub = (72.3±0.8) kJ mol^?1at 293–331 K.     

Halogenation and amination dual properties of haloamines in Raschig environment: A chlorine transfer reaction between chloramine and 3-azabicyclo[3,3,0]octane

The chlorine transfer reaction between 3-azabicyclo[3,3,0]octane “AZA” and chloramine was studied over pH 8–13 in order to follow both the amination and halogenation properties of NH₂Cl. The results show the existence of two competitive reactions which lead to the simultaneous formation of N-amino- and N-chloro- 3-azabicyclo[3,3,0]octane by bimolecular kinetics. The halogenation reaction is reversible and the chlorine derivative obtained, which is thermolabile and unstable in the pure state, was identified by electrospray mass spectrometry. These phenomena were quantified by a reaction between neutral species according to an apparent S_N2-type mechanism for the amination process and a ionic mechanism involving a reaction between chloramine and protonated amine for the halogenation process. Amination occurs only in strongly basic solutions (pH ≥ 13) while chlorination occurs at lower pH's (pH ≤ 8). At intermediate pH's, a mixture of these two compounds is obtained. The relative proportions of the products are a function of intrinsic rate constants, pH and pK_a of the reactants. The rate constants and thermodynamic activation parameters are the following: k₁ = 45.5 × 10⁻³ M⁻¹ s⁻¹; ΔH₁^0# = 59.8 kJ mol⁻¹; ΔS₁^0# = − 86.5 J mol⁻¹ K⁻¹ for amination; k₂ = 114 × 10⁻³ M⁻¹ s⁻¹; ΔH₂^0# = 63.9 kJ mol⁻¹; and ΔS₂^0# = − 48.3 J mol⁻¹ K⁻¹ for chlorination. The ability of an interaction corresponding to a specific (NH₃Cl⁺/RR′NH) or general (NH₂Cl/RR′NH) acid catalysis has been also discussed. © 1997 John Wiley & Sons, Inc.     

Fourier transform-ion cyclotron resonance study of the gas-phase acidities of germane and methylgermane; Bond dissociation energy of germane

An accurate gas-phase acidity for germane (enthalpy scale, equivalent to the proton affinity of GeH₃ ^?), ΔH _acid ^o(GeH₄) = 1502.0 ± 5.1 kJ mol^?1, is obtained by constructing a consistent acidity ladder between GeH₄, and H₂S by using Fourier transform-ion cyclotron resonance spectrometry, and 0 and 298.15 K values for the first bond dissociation energy of GeH₄ are proposed: D₀ ^o(H₃Ge-H) = 352 ± 9 kJ mol^?1; D ^o(H₃Ge-H) = 358 ± 9 kJ mol^?1, respectively. These results are compared with experimental and theoretical data reported in the literature. Methylgermane was found to be a weaker acid than germane by approximately 35 kJ mol^?1: ΔH _acid ^o = 1536.6 kJ mol^?1.     

Kinetics and Mechanism Study of the Substitution Reactions of the Chloride Ligand in Dichloro(5,10,15,20)‐tetraphenyl‐21H,23H‐porphinato)tin(IV) by Organic Bases in Dimethylformamide Solvent

Substitution reactions of a Cl⁻ ligand in [SnCl₂(tpp)] (tpp=5,10,15,20‐tetraphenyl‐21H,23H‐porphinato(2−)) by five organic bases i.e., butylamine (BuNH₂), sec‐butylamine (^sBuNH₂), tert‐butylamine (^tBuNH₂), dibutylamine (Bu₂NH), and tributylamine (Bu₃N), as entering nucleophile in dimethylformamide at I=0.1M (NaNO₃) and 30–55° were studied. The second‐order rate constants for the substitution of a Cl⁻ ligand were found to be (36.86±1.14)⋅10⁻³, (32.91±0.79)⋅10⁻³, (22.21±0.58)⋅10⁻³, (19.09±0.66)⋅10⁻³, and (1.36±0.08)⋅10⁻³ M ⁻¹s⁻¹ at 40° for BuNH₂, ^tBuNH₂, ^sBuNH₂, Bu₂NH, and Bu₃N, respectively. In a temperature‐dependence study, the activation parameters ΔH^≠ and ΔS^≠ for the reaction of [SnCl₂(tpp)] with the organic bases were determined as 38.61±4.79 kJ mol⁻¹ and −150.40±15.46 J K⁻¹mol⁻¹ for BuNH₂, 40.95±4.79 kJ mol⁻¹ and −143.75±15.46 J K⁻¹mol⁻¹ for ^tBuNH₂, 30.88±2.43 kJ mol⁻¹ and −179.00±7.82 J K⁻¹mol⁻¹ for ^sBuNH₂, 26.56±2.97 kJ mol⁻¹ and −194.05±9.39 J K⁻¹mol⁻¹ for Bu₂NH, and 39.37±2.25 kJ mol⁻¹ and −174.68±7.07 J K⁻¹ mol⁻¹ for Bu₃N. From the linear rate dependence on the concentration of the bases, the span of k₂ values, and the large negative values of the activation entropy, an associative (A) mechanism is deduced for the ligand substitution.     

Ag(I)‐Catalyzed Chlorination of Linezolid during Water Treatment: Kinetics and Mechanism

The kinetic and mechanistic study of Ag(I)‐catalyzed chlorination of linezolid (LNZ) by free available chlorine (FAC) was investigated at environmentally relevant pH 4.0–9.0. Apparent second‐order rate constants decreased with an increase in pH of the reaction mixture. The apparent second‐order rate constant for uncatalyzed reaction, e.g., k″_app = 8.15 dm³ mol⁻¹ s⁻¹ at pH 4.0 and k″_app. = 0.076 dm³ mol⁻¹ s⁻¹ at pH 9.0 and 25 ± 0.2°C and for Ag(I) catalyzed reaction total apparent second‐order rate constant, e.g., k″_app = 51.50 dm³ mol⁻¹ s⁻¹ at pH 4.0 and k″_app. = 1.03 dm³ mol⁻¹ s⁻¹ at pH 9.0 and 25 ± 0.2°C. The Ag(I) catalyst accelerates the reaction of LNZ with FAC by 10‐fold. A mechanism involving electrophilic halogenation has been proposed based on the kinetic data and LC/ESI/MS spectra. The influence of temperature on the rate of reaction was studied; the rate constants were found to increase with an increase in temperature. The thermodynamic activation parameters E_a, ΔH^#, ΔS^#, and ΔG^# were evaluated for the reaction and discussed. The influence of catalyst, initially added product, dielectric constant, and ionic strength on the rate of reaction was also investigated. The monochlorinated substituted product along with degraded one was formed by the reaction of LNZ with FAC.     

Sigmatropic [1,3]-boron shift (permanent allylic rearrangement) in 3-allyl-3-borabicyclo[3.3.1]nonanes

2D ¹H-¹H EXSY NMR spectroscopy show that the free energy of activation ΔG ^≠ in six 3-allyl-3-borabicyclo[3.3.1]nonane derivatives is significantly higher (72–86 kJ mol^?1) than that in typical allylboranes (48–66 kJ mol^?1). For the first member of the series, viz., 3-allyl-3-borabicyclo[3.3.1]nonane, the activation parameters of the permanent allylic rearrangement were also determined (ΔH ^≠ = 82.7±3.4 kJ mol^?1, ΔS ^≠ = ?11.8±10.3 J mol^?1 K^?1, E _A = 85.5±3.4 kJ mol^?1, lnA = 29.2±1.2).     

Die Bildungsenthalpie von Zinndijodid,SnJ2 (c)

The heat of reaction for SnJ₂ (c)+J₂ (c)+4045 CS₂ (l)=[SnJ₄; 4045 CS₂] (sol) has been determined to be (?41.12±0.55) kJ mol^?1, [(?9.83±0.13) kcal mol^?1] by isoperibol solution calorimetry. Combining this result with the heat of formation of SnJ₄ in CS₂ determined in a previous investigation¹¹ the value (?153.9±1.40) kJ mol^?1, [(?36.9±0.33) kcal mol^?1] has been derived for the heat of formation, ΔH _f ^ι (SnJ₂;c; 298.15 K), of tin diiodide.     

Conformational properties of 1-methyl-1-germacyclohexane: low-temperature NMR and quantum chemical calculations

The conformational preference of the methyl group of 1-methyl-1-germacyclohexane was studied experimentally in solution (low-temperature ¹³C NMR) and by quantum chemical calculations (CCSD(T), MP2 and DFT methods). The NMR experiment resulted in an axial/equatorial ratio of 44/56 mol% at 114 K corresponding to an A value (A = G _ax ? G _eq) of 0.06 kcal mol^?1. An average value for ΔG _e→a ^#  = 5.0 ± 0.1 kcal mol^?1 was obtained for the temperature range 106–134 K. The experimental results are very well reproduced by the calculations. CCSD(T)/CBS calculations + thermal corrections resulted in an A value of 0.02 kcal mol^?1, whereas a ΔE value of ?0.01 kcal mol^?1 at 0 K was obtained.     

Temperature dependence of the rate constants of the reactions of oxygen atoms with 1-pentene, 1-hexene,cis-2-pentene,and trans-2-pentene

The kinetics of the reactions of ground state oxygen atoms with 1-pentene, 1-hexene, cis-2-pentene, and trans-2-pentene was investigated in the temperature range 200 to 370 K. In this range the temperature dependences of the rate constants can be represented by k = A′ Tⁿ exp(− E′_a/RT) with A′ = (1.0 ± 0.6) · 10⁻¹⁴ cm³ s⁻¹, n = 1.13 ± 0.02, E′_a = 0.54 ± 0.05 kJ mol⁻¹ for 1-pentene: A′ = (1.3 ± 1.2) · 10⁻¹⁴ cm³ s⁻¹, n = 1.04 ± 0.08, E′_a = 0.2 ± 0.4 kJ mol⁻¹ for 1-hexene; A′ = (0.6 ± 0.6) · 10⁻¹⁴ cm³ s⁻¹, n = 1.12 ± 0.05, E′_a = − 3.8 ± 0.8 kJ mol⁻¹ for cis-2-pentene; and A′ = (0.6 ± 0.8) · 10⁻¹⁴ cm³ s⁻¹, n = 1.14 ± 0.06, E′_a = − 4.3 ± 0.5 kJ mol⁻¹ for trans-2-pentene. The atoms were generated by the H₂-laser photolysis of NO and detected by time resolved chemiluminescence in the presence of NO. The concentrations of the O(³P) atoms were kept so low that secondary reactions with products are unimportant. © 1997 John Wiley & Sons, Inc.     

Enthalpy and entropy of activation and the heat effect of the ene reaction between 4-phenyl-1,2,4-triazoline-3,5-dione and 2,3-dimethyl-2-butene in solution

The rate of the fastest ene reaction between 4-phenyl-1,2,4-triazoline-3,5-dione (1) and 2,3-dimethyl-2-butene (2) is studied by means of stopped flow in solutions of benzene (k ₂ = 55.6 ± 0.5 and 90.5 ± 1.3 L mol^?1 s^?1 at 23.3 and 40°C) and 1,2-dichloroethane (335 ± 9 L mol^?1 s^?1 at 23.5°C). The enthalpy of reaction (?139.2 ± 0.6 kJ/mol in toluene and ?150.2 ± 1.4 kJ/mol in 1,2-dichloroethane) and the enthalpy (20.0 ± 0.5 kJ/mol) and entropy (144 ± 2 J mol^?1 K^?1) of activation are determined. A clear correlation is observed between the reaction rate and ionization potential in a series of ene reactions of 4-phenyl-1,2,4-tri-azoline-3,5-dione with acyclic alkenes.     

Low-temperature heat capacity and standard molar enthalpy of formation of 9-fluorenemethanol (C14H12O)

Low-temperature heat capacities of the 9-fluorenemethanol (C₁₄H₁₂O) have been precisely measured with a small sample automatic adiabatic calorimeter over the temperature range between T=78 K and T=390 K. The solid–liquid phase transition of the compound has been observed to be T_fus=(376.567±0.012) K from the heat-capacity measurements. The molar enthalpy and entropy of the melting of the substance were determined to be Δ_fusH_m=(26.273±0.013) kJ · mol⁻¹ and Δ_fusS_m=(69.770±0.035) J · K⁻¹ · mol⁻¹. The experimental values of molar heat capacities in solid and liquid regions have been fitted to two polynomial equations by the least squares method. The constant-volume energy and standard molar enthalpy of combustion of the compound have been determined, Δ_cU(C₁₄H₁₂O, s)=−(7125.56 ± 4.62) kJ · mol⁻¹ and Δ_cH_m^∘(C₁₄H₁₂O, s)=−(7131.76 ± 4.62) kJ · mol⁻¹, by means of a homemade precision oxygen-bomb combustion calorimeter at T=(298.15±0.001) K. The standard molar enthalpy of formation of the compound has been derived, Δ_fH_m^∘(C₁₄H₁₂O,s)=−(92.36 ± 0.97) kJ · mol⁻¹, from the standard molar enthalpy of combustion of the compound in combination with other auxiliary thermodynamic quantities through a Hess thermochemical cycle.     

The enthalpies of formation of bis-(benzene)molybdenum and of bis-(toluene)tungsten

Microcalorimetric measurements at 520–523 K of the heats of thermal decomposition and of iodination of bis-(benzene)molybdenum and of bis-(toluene)tungsten have led to the values (kJ mol^?): ΔH^o_f[Mo(η-C₆H₆)₂, c] = (235.3 ± 8) and ΔH^o_f[W(η⁶-C₇H₈)₂, c] = (242.2 ± 8) for the standard enthalpies of formation at 25°C. The corresponding ΔH^o_f(g) values, using available and estimated enthalpies of sublimation, are (329.9 ± 11) and 352.2 ± 11) respectively, from which the metalligand mean bond-dissociation enthalpies, $\text{D}$(Mo—benzene) = (247.0 ± 6) and $\text{D}$(W—toluene) = (304.0 ± 6) kJ mol^?1, are derived.