Synthesis of SBA-15 from low cost silica precursor obtained from sugarcane leaf ash and its application as a support matrix for lipase in biodiesel production

Ordered mesoporous silica material was synthesized from a low-cost precursor, sugarcane leaf ash, was used as a support matrix for lipase for the production of biodiesel. The mesoporous samples were characterized using Fourier transform infra red spectroscopy. The surface topography and morphology of the mesoporous materials were studied using scanning electron microscope. The pore diameter, pore volume, Brunauer Emmett and Teller surface area of the mesoporous material were determined by N₂ gas adsorption technique. Different pore size Santa Barbara Acid-15 (SBA-15) samples were synthesized and their lipase immobilization capacity and specific enzyme activity of immobilization lipase were determined and compared. Lipase from Candida Antarctica immobilized on SBA-15 (C) had shown maximum percentage immobilization and specific enzyme activity. The immobilized lipase mesoporous matrix was used for biodiesel production from crude non-edible Calophyllum inophyllum oil. The percentage yield of fatty acid methyl ester, 97.6 % was obtained under optimized conditions: 100 mg of lipase immobilized on SBA-15, 6:1 methanol to oil molar ratio, the reaction of 2 g C. inophyllum oil with methanol.     

介孔分子筛SBA-15中α-胰凝乳蛋白酶组装及催化活性研究

介孔分子筛由于规则孔道或笼的存在 ,使其具有择形催化作用、高比表面积和强吸附性能 ,其孔道中可组装多种物质而改变其理化性能 .Thomas等 [1] 在介孔 Si O2 上接枝金属茂复合物 .白妮 [2 ] 和张雪峥 [3 ] 等分别将脂溶性金属酞菁衍生物和杂多酸封装在介孔分子筛中 ,得到的组装体催化性能优良 .近年来由于不断合成出 MCM- 41 [4 ] 和 SBA- 1 5 [5] 等孔径较大的介孔分子筛 ,使在介孔材料孔道中组装生物大分子成为可能 .Yen等 [6] 将细胞色素 c组装到孔道中 ,并使酶的稳定性得到提高 ,而α-胰凝乳蛋白酶 (Mr=2 5 0 0 0 ,分子动力学直径…     

Promoting immobilization and catalytic activity of horseradish peroxidase on mesoporous silica through template micelles

New concept on the promotion of immobilization and catalytic activity of enzyme on mesoporous silica through template micelles is proposed and realized in this paper. Proper P123 templates are controllable retained in the as-synthesized SBA-15, not only to anchor the horseradish peroxidase (HRP) guest, but also to establish the crowding-like microenvironment around the enzyme. The influence of retaining templates on the pore structure of SBA-15, immobilization, and catalytic activity of HRP is studied, and the possible process of template removal is proposed. Ethanol refluxing of 6 h is conformable to prepare the optimal mesoporous support characterized with the retained templates of about 8%. With the assistance of retained templates in SBA-15, up to 49 mg g(-1) of HRP can be immobilized, 100% more than that on calcined SBA-15. Furthermore, the thermal stability, the resistance of pH variation and denaturing agent urea, and the recycle usage of HRP immobilized are obviously elevated, paving a novel and low-cost route to develop enzyme catalysts.     

(SBA-15)-ZnS主-客体纳米复合材料的制备与表征

本研究在SBA-15分子筛孔道中制备了纳米ZnS。Zn_{2+首先通过离子交换交换到SBA-15中,通过水热法在SBA-15分子筛孔道中制备了纳米ZnS。(SBA-15)-ZnS复合物由粉末X-线衍射,傅立叶变换红外光谱,低温氮气吸附-解析附技术,固体扩散漫反射光谱以及发光研究进行了表征。粉末X-线衍射研究说明在制备主-客体纳米复合材料中分子筛骨架未被制备过程所破坏,保持完整且结晶度仍很高。傅立叶变换红外光谱表明制备的材料骨架完好。77 K低温氮气吸附-解析附研究表明所制备的复合材料孔体积,孔尺寸以及表面积相对于SBA-15分子筛降低,证明客体ZnS已成功地组装入分子筛孔道中。所制备的纳米复合材料固体扩散漫反射吸收光谱相对于体相ZnS显示出蓝移表明,ZnS已限制在分子筛的孔道中且复合材料中分子筛的孔道对ZnS具有明显的立体限域效应,ZnS成功地组装在SBA-15分子筛的孔道中。发光研究表明,(SBA-15)-ZnS样品出现明显发光现象。主-客体复合材料具有良好的发光性能,有望在发光材料领域中获得应用。}     

Direct synthesis of metal oxide incorporated mesoporous SBA-15, and their applications in non-enzymatic sensing of glucose

One-step direct synthetic route is reported for the preparation of M-SBA-15 materials (M=Cu, Ni, Co, Fe, and Mn) with nSi/nM ratios ranging from 100 to 10 under mild acidic condition than conventionally employed for the synthesis of Si-SBA-15. Materials were characterized by a complementary combination of X-ray diffraction, nitrogen sorption, scanning electron microscopy, transmission electron microscopy, Fourier transform infrared, and UV-visible spectroscopy. Experimental evidences show that metal oxides are incorporated in the pore wall of SBA-15 matrices. A non-enzymatic electrochemical sensor device was fabricated for glucose detection based on M-SBA-15 materials. Cyclic voltammetry and linear sweep voltammetry were used to evaluate the catalytic activity of the M-SBA-15 modified electrode toward glucose. It was found that the Cu-SBA-15 (Si/Cu=20) modified electrode showed enhanced electrocatalytic activity toward the oxidation of glucose in alkaline solution compared to that of the conventional CuO and other M-SBA-15 materials investigated in this study. Under the optimal detection conditions, the Cu-SBA-15 (Si/Cu=20) exhibited linear behavior in the concentration range from 10 μM to 20 mM for the quantification of glucose with a limit of detection of 10 μM. Moreover, the Cu-SBA-15 modified electrode was also relatively insensitive to commonly interfering species such as ascorbic acid, uric acid, and dopamine.     

Preparation and characterization of (SBA-15)-La2O3 host-guest composite materials

Lanthanum oxide was successfully incorporated into an SBA-15 mesoporous molecular sieve via the microwave-assisted synthesis method (MASM) for the first time, and was compared with liquid-phase grafting and thermal diffusion methods. A series of characterizations were used to characterize the prepared materials. The results showed that the preparation of (SBA-15)-La₂O₃ host-guest composite materials by MASM has the advantages of simpler operation, higher efficiency and more plentiful lanthanum oxide could be incorporated into SBA-15 compared with other methods. In the prepared host-guest (SBA-15)-La₂O₃ materials, the frameworks of the host molecular sieve were kept intact, their structures were still kept high ordered and the guest lanthanum oxide locates inside the pores of the SBA-15. The sizes of the prepared (SBA-15)-La₂O₃ samples were 340-357 nm. The prepared host-guest composite materials show the properties of luminescence, and the luminescent intensities are about 2 times of bulk La₂O₃.     

Prearation of Highly Ordered Mesoporous Silica Materials and Application as Enzeme Supports

An enzyme, horseradish peroxidase (HRP), was adsorbed in the manner of single immersion method on the silica mesoporous materials, FSM-16, MCM-41 and SBA-15 with various pore diameters from 27 to 92 and their enzymatic activity in an organic solvent and the thermal stability were studied. FSM-16 and MCM-41 showed larger amount of adsorption of HRP than SBA-15 or silica gel,when the pore sizes were larger than the spherical molecular diameter of HRP (ca 64×37). The increased enzyme adsorption capacity may be due to the surface characteristics of FSM-16 and MCM-41, which would be consistent with the observed larger adsorption capacity of cationic pigment compared with anionic pigment for these materials. The immobilized HRP on FSM-16 and MCM-41 with pore diameter above 50 showed the highest enzymatic activity in an organic toluene and thermal stability in aqueous solution at the temperature of 70℃. The immobilized enzymes on the other mesoporous materials including large or small pore sized FSM-16 showed lower enzymatic activity in an organic solvent and the thermal stability. Both surface character and size matching between pore sizes and the molecular diameters of HRP were important in achieving high enzymatic activity in organic solvent and high thermal stability.     

Synthesis and characterization of mesoporous SBA-15/propranolol hydrochloride for controlled drug release study

Propranolol hydrochloride was incorporated into SBA-15 mesoporous material host by impregnation method to obtain host-guest nanocomposite material (SBA-15)-propranolol hydrochloride. By spectrophotometry, the amount of propranolol hydrochloride assembly was determined to be 382.05?mg/g (drug/SBA-15). Powder X-ray diffraction test results indicated that during the process of incorporation the framework of the molecular sieve was not destroyed and the molecular sieve still remained its structure ordering. Fourier transform infrared spectra showed that the framework of the prepared host-guest material was remained in good condition. Low-temperature nitrogen adsorption-desorption at 77?K results showed that the surface area and the pore volume of (SBA-15)-propranolol hydrochloride host-guest material decreased compared to those of the host molecular sieve, indicating that propranolol hydrochloride guest molecules have partially occupied the channels of the molecular sieve. Transmission electron microscopy and scanning electron microscopy results indicated that two-dimensional hexagonal mesoporous pore channels of the molecular sieve were retained and (SBA-15)-propranolol hydrochloride composite material remained fibrous crystals and the average diameter of sample was 336?nm. It was discovered in drug release principle in the simulated body fluid that the effective release time of the drug reached 30?h and the maximum cumulative released amount of propranolol hydrochloride was 99.3?%. When drug release time arrived at 5?h in the simulated gastric juice, the maximum cumulative released amount was 51.2?%.When drug release time arrived at 9?h in the simulated intestinal fluid, the maximum cumulative released amount was 70.1?%. The drug sustained release results showed that SBA-15 is a well-controlled drug release carrier.     

Effects of Morphology and Structural Characteristics of Ordered SBA-15 Mesoporous Silica on Release of Ibuprofen

Three kinds of highly ordered SBA-15 mesoporous materials with different pore sizes and morphologies denoted as LPS-SBA-15 (stick-like with pore size 7.28 nm), CPS-SBA-15 (stick-like with pore size 5.96 nm) and T-SBA-15 (tablet-like with pore size 4.64 nm) have been prepared, characterized and employed as carrier materials. The release behaviors of the ibuprofen in a simulated body fluid from these mesoporous silica materials were studied. The influences of pore size and exterior morphologies of mesoporous silica on the release behaviors of ibuprofen have been investigated. It has been found that the release becomes fast with increasing of pore size and slow with extending of transport pathway, and that the release rate of ibuprofen from the three kinds of SBA-15 is LPS-SBA-15 > T-SBA-15 > CPS-SBA-15. The results show that the inner structure as well as the exterior morphologies of SBA-15 mesoporous silica can seriously affect the release behaviors of ibuprofen.     

甲基丙烯酸甲酯在改性介孔分子筛SBA-15孔道中的溶液聚合

水热法合成了介孔分子筛SBA-15,分别用硅烷偶联剂KH-151,KH-560和KH-570对SBA-15进行了改性,将不同类型的改性介孔分子筛(M-SBA-15)作为"微反应器",把含MMA的甲苯溶液载入到"微反应器"中,通过溶液聚合法使得MMA在孔道内部形成聚合物.通过XRD,FTIR,N2吸附/脱附,GPC,1H-NMR,TG和DSC测试手段对M-SBA-15和PMMA/M-SBA-15复合材料以及孔道内PMMA进行了分析测试.研究表明,改性介孔分子筛仍保留了有序介孔材料的基本特性,M-SBA-15和相应的复合材料的比表面积、孔径以及孔容降低,表明PMMA载入到介孔分子筛的孔道中.与传统的溶液聚合所得的PMMA相比,介孔孔道内所得的PMMA的分子链的间规立构度有所提高,其分子量约为传统溶液聚合的十几倍,初始热稳定性明显提高,玻璃化转变温度提高9～11℃.此外,KH-151改性SBA-15载入最多的PMMA,所得的PMMA的分子量和玻璃化转变温度最高.     

Methodology for the immobilization of enzymes onto mesoporous materials

Cytochrome c and xylanase were adsorbed onto two mesoporous materials, SBA-15 (a pure silicate) and MSE (an organosilicate), with very similar physical properties but differing chemical compositions. A methodical order was developed whereby the influences of surface area, pore size, extent of order, particle size, surface potentials, isoelectric points, pH, and ionic strength on immobilization were explored. In silico studies of cytochrome c and xylanase were conducted before any immobilization experiments were carried out in order to select compatible materials and probe the interactions between the adsorbents and the mesoporous silicates. The stabilities of the mesoporous materials at different pH values and their isoelectric points and zeta potentials were determined. Electrostatic attraction dominated protein interactions with SBA-15, while weaker hydrophobic interactions are more prominent with MSE for both cytochrome c and xylanase. The ability of the immobilized protein/enzyme to withstand leaching was measured, and activity tests and thermostability experiments were conducted. Cytochrome c immobilized onto SBA-15 showed resistance to leaching and an enhanced activity compared to free protein. The immobilized cytochrome c was shown to have higher intrinsic activity but lower thermostability than free cytochrome c. From an extensive characterization of the surface properties of the silicates and proteins, we describe a systematic methodology for the adsorption of proteins onto mesoporous silicates. This approach can be utilized in the design of a solid support for any protein.     

A Copper(II) Schiff base complex immobilized onto SBA-15 silica for selective oxidation of benzyl alcohol

A copper(II) Schiff base complex has been immobilized onto SBA-15 silica through a stepwise procedure and tested as an oxidation catalyst. BET surface area, total pore volume and average pore width of the SBA-15 all decrease after stepwise modification of SBA-15, while the structure of the support remains intact. The molar ratio of Cu²⁺/Schiff base is ca. 1/2 in the synthesized material. Catalytic tests showed that the supported copper complex catalyzes the oxidation of benzyl alcohol with 30 % conversion and 89 % selectivity to benzaldehyde when water is used as the solvent.     

Immobilization of hemoglobin on SBA-15 applied to the electrocatalytic reduction of H<Subscript>2</Subscript>O<Subscript>2</Subscript>

The direct electron transfer between hemoglobin (Hb) and an electrode was realized by first immobilizing the protein onto SBA-15.The results of the immobilization showed that the adsorption was pH-dependent with a maximum adsorption near the isoelectric point of the protein, and SBA-15 with a larger pore diameter showed greater adsorption capacity for Hb. UV–vis spectroscopy and nitrogen adsorption analysis indicated that Hb was adsorbed within the channel of SBA-15 and no significant denaturation occurred to the protein. The Hb/SBA-15 composite obtained was used for the fabrication of a Hb biosensor to detect hydrogen peroxide. A pair of well-defined redox peaks at −0.337 and −0.370 V on the Hb/SBA-15 composite modified glassy carbon electrode was observed, and the electrode reactions showed a surface-controlled process with a single proton transfer at a scan rate range from 20 to 1,000 mV/s. The sensor showed a fast amperometric response, a low detection limit (2.3 × 10⁻⁹ M) and good stability for the detection of H₂O₂. The electrochemical results indicated that the immobilized Hb still retained its biological activity.     

Feruloyl esterase immobilization in mesoporous silica particles and characterization in hydrolysis and transesterification

Background

Enzymes display high reactivity and selectivity under natural conditions, but may suffer from decreased efficiency in industrial applications. A strategy to address this limitation is to immobilize the enzyme. Mesoporous silica materials offer unique properties as an immobilization support, such as high surface area and tunable pore size.

Results

The performance of a commercially available feruloyl esterase, E-FAERU, immobilized on mesoporous silica by physical adsorption was evaluated for its transesterification ability. We optimized the immobilization conditions by varying the support pore size, the immobilization buffer and its pH. Maximum loading and maximum activity were achieved at different pHs (4.0 and 6.0 respectively). Selectivity, shown by the transesterification/hydrolysis products molar ratio, varied more than 3-fold depending on the reaction buffer used and its pH. Under all conditions studied, hydrolysis was the dominant activity of the enzyme. pH and water content had the greatest influence on the enzyme selectivity and activity. Determined kinetic parameters of the enzyme were obtained and showed that K_m was not affected by the immobilization but k_cat was reduced 10-fold when comparing the free and immobilized enzymes. Thermal and pH stabilities as well as the reusability were investigated. The immobilized biocatalyst retained more than 20% of its activity after ten cycles of transesterification reaction.

Conclusions

These results indicate that this enzyme is more suited for hydrolysis reactions than transesterification despite good reusability. Furthermore, it was found that the immobilization conditions are crucial for optimal enzyme activity as they can alter the enzyme performance.

     

Improved Performance of Lipase Immobilized on Tannic Acid-Templated Mesoporous Silica Nanoparticles

Mesoporous silica nanoparticles were synthesized by using tannic acid as a pore-forming agent, which is an environmentally friendly, cheap, and non-surfactant template. SEM and TEM images indicated that the tannic acid-templated mesoporous silica nanoparticles (TA-MSNs) are monodisperse spherical-like particles with an average diameter of 195?±?16 nm. The Brunauer–Emmett–Teller (BET) results showed that the TA-MSNs had a relatively high surface area (447 m²/g) and large pore volume (0.91 cm³/g), and the mean pore size was ca. 10.1 nm. Burkholderia cepacia lipase was immobilized on the TA-MSNs by physical adsorption for the first time, and the properties of immobilized lipase (BCL@TA-MSNs) were investigated. The BCL@TA-MSNs exhibited satisfactory thermal stability; strong tolerance to organic solvents such as methanol, ethanol, isooctane, n-hexane, and tetrahydrofuran; and high operational reusability when BCL@TA-MSNs were applied in esterification and transesterification reactions. After recycling 15 times in the transesterification reaction for biodiesel production, over 85 % of biodiesel yield can be maintained. With these desired characteristics, the TA-MSNs may provide excellent candidates for enzyme immobilization.     

Rh(I)/(III)-N-Heterocyclic Carbene Complexes: Effect of Steric Confinement Upon Immobilization on Regio- and Stereoselectivity in the Hydrosilylation of Alkynes

Rh(I) NHC and Rh(III) Cp* NHC complexes (Cp*=pentamethylcyclopentadienyl, NHC=N-heterocyclic carbene=pyrid-2-ylimidazol-2-ylidene (Py−Im), thiophen-2-ylimidazol-2-ylidene) are presented. Selected catalysts were selectively immobilized inside the mesopores of SBA-15 with average pore diameters of 5.0 and 6.2 nm. Together with their homogenous progenitors, the immobilized catalysts were used in the hydrosilylation of terminal alkynes. For aromatic alkynes, both the neutral and cationic Rh(I) complexes showed excellent reactivity with exclusive formation of the β(E)-isomer. For aliphatic alkynes, however, selectivity of the Rh(I) complexes was low. By contrast, the neutral and cationic Rh(III) Cp* NHC complexes proved to be highly regio- and stereoselective catalysts, allowing for the formation of the thermodynamically less stable β-(Z)-vinylsilane isomers at room temperature. Notably, the SBA-15 immobilized Rh(I) catalysts, in which the pore walls provide an additional confinement, showed excellent β-(Z)-selectivity in the hydrosilylation of aliphatic alkynes, too. Also, in the case of 4-aminophenylacetylene, selective formation of the β(Z)-isomer was observed with a neutral SBA-15 supported Rh(III) Cp* NHC complex but not with its homogenous counterpart. These are the first examples of high β(Z)-selectivity in the hydrosilylation of alkynes by confinement generated upon immobilization inside mesoporous silica.     

Physical and chemical adsorption of Mucor javanicus lipase on SBA-15 mesoporous silica. Synthesis, structural characterization, and activity performance

In this work a sample of SBA-15 mesoporous silica was synthesized and characterized by TEM, XRD, and N2 adsorption. The sample had a high value of specific surface area (1007 m2 g(-1)) and total pore volume (2.1 cm3 g(-1)). The pore diameter was 67 angstroms, so it was large enough to accommodate protein molecules inside the channels. Immobilization by physical adsorption of a commercial lipase preparation from Mucor javanicus was performed at different pH values (pH 5-8). pH 6 gave the highest lipase loading and hydrolytic activity of the corresponding biocatalyst. Chemical modification of the SBA-15 via glutardialdehyde allowed also the enzyme immobilization through chemical adsorption. This preparation was active toward tributyrin hydrolysis. On the contrary, very low activity toward triolein hydrolysis was observed. The reduction of the size of the channels due the immobilization process has been suggested as a possible explanation.     

New attempt at directly generating superbasicity on mesoporous silica SBA-15

Direct generation of superbasicity on mesoporous silica SBA-15 was realized by tailoring the host-guest interaction, and calcium species were selected as the guest in modifying SBA-15. The results show that calcium species could be homogeneously distributed on the surface of SBA-15. Because of the host-guest interaction, the decomposition of the supported calcium nitrate was apparently easier than the bulk one. Surprisingly, the calcium nitrates modified SBA-15 (CaNS) samples exhibited superbasicity with good preservation of the mesostructure after activation, differing from the potassium nitrate loaded SBA-15 samples that displayed weak basicity with collapsed mesostructure. The present superbasic CaNS materials also possess good water resistance and high surface areas, up to 429 m(2) g(-1), which is promising for their potential applications in adsorption and catalysis. Further investigation concerning the roles played by the guest in basicity formation on SBA-15 was conducted. The samples modified by Group 2 metal nitrates showed strong basicity with base strength (H-) of 22.5-27.0 and good preservation of mesostructure. In contrast, loading Group 1 metal nitrates on SBA-15 produced samples with weak basicity ( H-=9.3-15.0) and collapsed mesostructure after activation. Such differences can be related to the interaction between the resulting metal oxide and the silica support, as well as the mobility of the cations in the metal oxide.     

Influence of Silica-Derived Nano-Supporters on Cellobiase After Immobilization

Core shell magnetite nanoparticle (CSMN) was successfully synthesized with diameter around 125 nm according to the determination with scanning electronic microscopy. SBA-15 with diameter around 31 nm was synthesized in our previous work as another supporter for immobilized degradation enzymes. The aim of this study was to investigate the influence of silica-derived nano-supporters on cellobiase after immobilization. With covalent method, glutaraldehyde was introduced to immobilize cellobiase. The immobilized enzyme efficiency, specific activity, and its characterization, including optimum pH, pH stability, optimum temperature for enzyme reaction, and enzyme thermal stability were investigated. Results show that the method of enzyme immobilization on both nano-supporters could improve cellobiase stability under low pH and high temperature conditions compared with the free enzyme. In the aspect of immobilization efficiency, SBA had higher amount of bounded protein than that of CSMN, but had lower specific enzyme activity than CSMN, assumably due to the change in silica surface properties caused by process of supporter synthesis.     

Polyluminol/hydrogel composites as new electrochemiluminescent-active sensing layers

This paper reports on electrochemiluminescent sensors and biosensors based on polyluminol/hydrogel composite sensing layers using chemical or biological membranes as hydrogel matrices. In this work, luminol is electropolymerized under near-neutral conditions onto screen-printed electrode (SPE)-supported hydrogel films. The working electrode coated with a hydrogel film is soaked in a solution containing monomeric luminol units, allowing the monomeric luminol units to diffuse inside the porous matrix to the electrode surface where they are electropolymerized by cyclic voltammetry (CV). Sensors and enzymatic biosensors for H₂O₂ and choline detection, respectively, have been developed, using choline oxidase (ChOD) as a model enzyme. In this case, hydrogel is used both as the enzymatic immobilization matrix and as a template for the electrosynthesis of polyluminol. The enzyme was immobilized by entrapment in the gel matrix during its formation before electropolymerization of the monomer. Several parameters have been optimized in terms of polymerization conditions, enzyme loading, and average pore size. Using calcium alginate or tetramethoxysilane (TMOS)-based silica as porous matrix, H₂O₂ and choline detection are reported down to micromolar concentrations with three orders of magnitude wide dynamic ranges starting from 4?×?10^?7 M. Polyluminol/hydrogel composites appear as suitable electrochemiluminescence (ECL)-active sensing layers for the design of new reagentless and disposable easy-to-use optical sensors and biosensors, using conventional TMOS-based silica gel or the more original and easier to handle calcium alginate, reported here for the first time in such a configuration, as the biocompatible hydrogel matrix. Figure

Elaboration of electrochemiluminent polyluminol/hydrogel composite sensing layers