Dawson结构(NH4)6P2Mo18O62·12H2O纳米粉体的室温固相合成及形成机理

以H₆P₂Mo₁₈O₆₂·23H₂O和(NH₄)₂C₂O₄·H₂O为原料，首次采用室温固相反应合成出(NH₄)₆P₂Mo₁₈O₆₂·12H₂O纳米粉体，并运用元素分析、FTIR、XRD、TEM、TG-DTA和BET等技术对其组成、结构和性能进行了表征。发现(NH₄)₆P₂Mo₁₈O₆₂·12H₂O纳米粉体平均粒径为40 nm，保留着杂多阴离子的Dawson结构，具有Dawson结构的特征衍射峰，比表面积为143.9 m²·g^-1，在445 ℃以下杂多阴离子有良好的热稳定性。在该固相反应中，研磨和放热反应热能可加速反应物分子的扩散速率和生成物分子的成核速率，使产物粒径减小；反应物含有结晶水和生成物H₂C₂O₄·2H₂O对形成小粒径的(NH₄)₆P₂Mo₁₈O₆₂·12H₂O纳米粉体起关键作用。     

W18O49/NH2-UiO-66复合催化剂的高效光催化CO2环加成

以2-氨基对苯二甲酸（H₂ATA）为配体,通过溶剂热法合成了Zr基MOF：NH₂-UiO-66,继而以氯化钨为前驱体,通过溶剂热法实现了富含氧空位的缺陷氧化钨（W₁₈O₄₉）在NH₂-UiO-66上的原位生长,构建了具有典型Ⅱ型异质结的复合光催化剂W₁₈O₄₉/NH₂-UiO-66。通过粉末X射线衍射、扫描电子显微镜、X射线光电子能谱和紫外可见漫反射光谱对催化剂的组成与结构进行了表征。在室温常压、模拟太阳光下,以氧化苯乙烯为模型底物,对所有样品的光催化活性进行了考察,W₁₈O₄₉/NH₂-UiO-66展现了最高的碳酸苯乙烯酯产率（58 mmol·g^-1·h^-1）。     

长链烷胺及手性钛的螯合物Ti[(OC2H4)3N][OCH(CH3)2]在层状V2O5中的插层行为

用一种简便快速方法合成了一系列长链有机胺插层V₂O₅化合物. 用粉末X射线衍射(XRD)、红外光谱(FT-IR)、漫反射紫外-可见光谱(DR UV-VIS)等手段对插层产品的结构进行了表征. 除了正十六胺插层V₂O₅产品外, 其它长链烷胺插层V₂O₅产品的层间距d₀₀₁与长链烷胺碳数n之间具有良好的线性关系: d₀₀₁＝0.160n_C＋0.731 nm. 正十六胺与V₂O₅反应后生成两个插层相, 一个相的层间距d₀₀₁为4.01 nm, 另一相的d₀₀₁为3.20 nm. 此外, 研究了手性钛的螯合物Ti[(OC₂H₄)₃N][OCH(CH₃)₂] (记为TEAIP)在V₂O₅层间的插层行为, 得到相应的插层产品.     

o-ZrW1.6Mo0.4O8·H2O正交相的合成与表征

The precursor ZrW_1.6Mo_0.4O₇(OH)₂(H₂O)₂ was characterized by IR and XRD methods. δ′-ZrW_1.6Mo_0.4O₈ was prepared by careful controlling the annealing conditions from the precursor and was determined to have the formula as o-ZrW_1.6Mo_0.4O₈·H₂O by TG-DSC, IR, and XRD methods. The relation between o-ZrW_1.6Mo_0.4O₈·H₂O and o-ZrW_1.6Mo_0.4O₈ was discussed through variable temperature XRD patterns. Further more, the mechanism of the precursor dehydration was suggested.     

制备参数对高比表面积介孔催化剂La-Co-Zr-O结构与性能的影响

采用双表面活性剂模板(十六烷基三甲基溴化铵和聚乙二醇辛基苯基醚的混合物)分解法制备了不同原子比(n_La+n_Co)/(n_La+n_Co+n_Zr)和不同温度焙烧的系列介孔混合氧化物催化剂La-Co-Zr-O。运用XRD、N₂吸附/脱附、XPS和H₂-TPR等技术对催化剂进行了表征，并以CO和C₃H₈氧化为模型反应，考察了组分配比和焙烧温度等参数对催化剂催化性能的影响。比表面积和孔径测试结果表明，样品具有很高的比表面积(108～266 m²·g^-1)和分布集中的孔径(3.4～3.9 nm)，Zr含量较高的样品比表面积较大。XRD结果表明，样品中的活性组分钴物种主要以Co₃O₄形式存在；XPS和H₂-TPR结果表明，样品中可还原的晶格氧的数量、活动度以及表面钴原子浓度均与催化剂对CO和C₃H₈的氧化性能密切相关。原子比为0.5的样品中，较多的晶格氧易于在相对低温下还原；而原子比为0.7的样品表面钴原子浓度较高，这使得两样品均表现出较高的催化活性。经650 ℃焙烧的样品仍保持较高的比表面积(108 m²·g^-1)和分布集中的介孔孔径(最可几孔径约3.8 nm)，且催化活性下降幅度也很小，表明该系列介孔催化剂具有优良的抗烧结能力和介孔热稳定性。     

纳米三氧化二钴低温热容和热力学性质的研究

The isobaric molar heat capacities of nano Co₂O₃ were determined by an adiabatic calorimeter in the temper-ature range from 78 to 350K. No phase transition takes place in this temperature range. The relationship of C_p，m with respect to thermodynamic temperature T was established as C_p，m=-11.998X³-9.6431X²+63.478X+81.291(J·K^-1·mol^-1) ， where X=(T-201.903)/121.535， the correlation coefficient R₂=0.9996. Ac-cording to this relationship and the relationships between thermodynamic functions， the thermodynamic functions of nano Co₂O₃ relative to the standard temperature of 298.15K were derived based on the measured heat capacity data. The average grain size of the studied nano Co₂O₃ sample was determined to be 12nm by TEM.     

g-C3N4/CaTi2O5复合材料制备及其光催化性能

利用类石墨氮化碳（g-C₃N₄）和亚稳相钙钛氧化物（CaTi₂O₅）固相法制备C₃N₄/CaTi₂O₅复合材料。利用X射线衍射（XRD）、金相显微镜、扫描电子显微镜（SEM）及附带能谱分析仪（EDS）和N₂吸附-脱附对样品的显微结构和比表面积进行检测分析,并用紫外-可见吸收光度计（UV-Vis）测试了样品的光吸收性能,研究C₃N₄与CaTi₂O₅物质的量之比（n_C3N4/nCaTi₂O₅）对C₃N₄/CaTi₂O₅复合样品的物相结构和微观形貌的影响,同时考察C₃N₄/CaTi₂O₅复合样品在可见光照射下光催化降解罗丹明染料效果。实验结果表明：相比纯C₃N₄和CaTi₂O₅样品,C₃N₄/CaTi₂O₅复合样品在可见光下具有较高的光催化性能,随着n_C3N4/nCaTi₂O₅增加,样品的光催化降解率随之增加而后降低,当n_C3N4/nCaTi₂O₅=1：1时,样品的光催化降解率达到最大值99.5%,并且循环重复利用5次后,样品的光催化剂降解率仍几乎保持不变。复合样品光催化性能提高主要归因于复合能级结构有效地抑制了电子和空穴复合所致。     

噻吩环掺杂氮化碳纳米片的制备及光催化性能

二次热剥离是合成二维氮化碳纳米片(CNN)的有效方法,进一步拓宽其可见光响应并优化光电转化效率是提升CNN光催化性能的有效策略。本工作采用原位聚合分子掺杂和二次热剥离相结合的方法,以2-氨基噻吩-3-甲腈为分子掺杂源,将噻吩环原位掺杂引入并稳定存在于CNN共轭杂环,制备了噻吩环掺杂的氮化碳纳米片光催化剂(CNN-Th_x)。经过二次热剥离后,产物保持二维杂化共轭聚合结构且噻吩环依然稳定掺杂于CNN共轭杂环。噻吩环掺杂引起π共轭体系进一步扩展,降低了产物禁带宽度,拓宽了可见光吸收范围,增强了光电转换效率;同时,二次热剥离协同噻吩掺杂引起更显著的n-π^*跃迁,大幅提升了催化剂的光催化活性。在可见光照下对催化剂进行光解水制H₂及活化O₂制H₂O₂的性能测试。结果表明,CNN-Th_x具有显著增强的光催化还原性能,其中,CNN-Th₁₀的产氢活性达到322.8 μmol·h^-1,4 h后生成H₂O₂浓度达到223.1 μmol·L^-1,分别是CNN的3.6和22.3倍。     

Al3+掺杂对Li2FeSiO4结构和电化学性能影响的研究

以CH₃COOLi·2H₂O、C₆H₈O₇·H₂O、FeC₆H₅O₇·5H₂O、Al₂(SO₄)₃·18H₂O和C₈H₂₀O₄Si为起始原料,采用水热辅助溶胶凝胶法及二次煅烧合成了Li₂Fe_1-xAl_xSiO₄/C(x=0.00、0.01、0.03、0.05)正极材料。用IR、XRD、FE-SEM、EDS等方法对材料的晶体结构进行了表征,用ZetaPAL粒度分析仪测量了其粒径分布范围,用SQUID(超导量子干涉仪)测定了样品的磁性,用恒流充/放电对其电化学性能进行了测试。结果表明：n_乙酸锂∶n_柠檬酸=4∶1、掺Al³⁺量为3%,80 ℃回流24 h,350 ℃恒温煅烧5 h,700 ℃恒温13 h,所得试样颗粒集中分布在150 nm左右且未出现团聚。在0.1C(16 mA·g^-1)、0.2C、0.5C下的首次放电比容量为127 mAh·g^-1、103.6 mAh·g^-1和91 mAh·g^-1,15次循环后无明显衰减,具有很好的循环稳定性。     

长链烷胺及手性钛的螯合物Ti[(OC2H4)3N][OCH(CH3)2]在层状V2O5中的插层行为

用一种简便快速方法合成了一系列长链有机胺插层V₂O₅化合物. 用粉末X射线衍射(XRD)、红外光谱(FT-IR)、漫反射紫外-可见光谱(DR UV-VIS)等手段对插层产品的结构进行了表征. 除了正十六胺插层V₂O₅产品外, 其它长链烷胺插层V₂O₅产品的层间距d₀₀₁与长链烷胺碳数n之间具有良好的线性关系: d₀₀₁＝0.160n_C＋0.731 nm. 正十六胺与V₂O₅反应后生成两个插层相, 一个相的层间距d₀₀₁为4.01 nm, 另一相的d₀₀₁为3.20 nm. 此外, 研究了手性钛的螯合物Ti[(OC₂H₄)₃N][OCH(CH₃)₂] (记为TEAIP)在V₂O₅层间的插层行为, 得到相应的插层产品.     

Intercalation behavior of n-alkylamines into an A-site defective layered perovskite H2W2O7

Intercalation behavior of n-alkylamines into a protonated form of an A-site defective layered perovskite H₂W₂O₇ has been investigated. Results from XRD indicate these materials are layered with the corresponding interlayer spacing governed by the n-alkylamine chain length, and a reversible intercalation and deintercalation property is observed among these intercalation compounds. The IR spectra of the intercalation compounds with n-alkylamines clearly show that n-alkyl chains possess an all-trans conformation, and H₂W₂O₇ accommodate n-alkylamines (C_nH_2n+1NH₂: n=3, 4, 7, 8, 12, 16) to form intercalation compounds via an acid-base mechanism. A linear relationship between the interlayer distance and the number of carbon atoms in n-alkyl chains is observed to show a bilayer arrangement of the n-alkyl chains with a tilt angle of ∼71.6°. Elemental analysis studies reveal that the amounts of intercalated n-alkylamines are about 2.0 mol per [W₂O₇]. Despite the surface geometry of H₂W₂O₇ is almost identical to those of layered perovskites H₂[A_n−1B_nO_3n+1], the amounts of intercalated n-alkylamines of them are different. A reasonable explanation is given through our research.     

Intercalation ofn-alkylamines into α-titanium phosphate from aqueous solutions

The intercalation reactions betweenn-alkylamines and -titanium phosphate in aqueous media have been investigated. The compounds with the maximum intercalation have the formula -Ti(HOPO₃)₂ · 2 C _n H _2n+1 NH₂ · H₂O (n=1–10). Defined crystalline phases with lower amine content are described, the general formula being -Ti(HOPO₃)₂ · _m C _n H _2n+1 NH₂ ·pH₂O (m=1.0 1.3, 1.5, 1.7). Whenm=1.0 then-alkylamines form a monomolecular layer. Whenm>1.0 the layer is bimolecular. The inclination angle and the packing density of then-alkylamines in the interlayer space is determined.     

Two anilinium salts: anilinium hydrogenphosphite and anilinium hydrogenoxalate hemihydrate

In the title compounds, C₆H₅NH₃⁺·H₂PO₃^? and C₆H₅NH₃⁺·C₂HO₄^?·0.5H₂O, the NH₃⁺ groups of the anilinium ion are ordered at room temperature. The rotation of these groups along the N—C_aryl bond, which is often observed at room temperature in other anilinium compounds, is prevented by hydrogen bonds between the NH₃⁺ group and the anions. In both compounds, the geometry of the cation is significantly distorted from D_6h to a symmetry close to C_2v. The angle ipso to the substituent is significantly larger than 120°, as expected from the σ‐electron‐withdrawing character of the NH₃⁺ group.     

Thermal characterization of new complexes of Zn(II) and Cd(II) with some bipyridine isomers and propionates

New mixed ligand complexes of the following stoichiometric formulae: M(2-bpy)₂(RCOO)₂·nH₂O, M(4-bpy)(RCOO)₂·H₂O and M(2,4’-bpy)₂(RCOO)₂·H₂O (where M(II)=Zn, Cd; 2-bpy=2,2’-bipyridine, 4-bpy=4,4′-bipyridine, 2,4′-bpy=2,4′-bipyridine; R=C₂H₅; n=2 or 4) were prepared in pure solid-state. These complexes were characterized by chemical and elemental analysis, IR and conductivity studies. Thermal behaviour of compounds was studied by means of DTA, DTG, TG techniques under static conditions in air. The final products of pyrolysis of Cd(II) and Zn(II) compounds were metal oxides MO. A coupled TG/MS system was used to analyse of principal volatile products of thermal decomposition or fragmentation of Zn(4-bpy)(RCOO)2·H2O under dynamic air and argon atmosphere. The principal species correspond to: C⁺, CH⁺, CH₃ ⁺, C₂H₂ ⁺, HCN⁺, C₂H₅ ⁺ or CHO⁺, CH₂O⁺ or NO⁺, CO₂ ⁺, ¹³C¹⁶O₂ ⁺ and ¹²C¹⁶O¹⁸O⁺ and others; additionally CO⁺ in argon atmosphere.     

N1‐(4‐tert‐Butyl­phenyl)‐N2‐hydroxy‐α‐oxo‐α‐phenyl­acet­amidine and N2‐hydroxy‐N1‐(4‐nitro­phenyl)‐α‐oxo‐α‐phenyl­acet­amidine hemihydrate

In the title compounds, C₁₈H₂₀N₂O₂, (I), and C₁₄H₁₁N₃O₄·0.5H₂O, (II), respectively, the oxime groups have an E configuration. In (I), the mol­ecules exist as polymers bound by intermolecular C—H⋯O and O—H⋯N hydrogen bonds around inversion centres. In (II), intermolecular OW—H⋯N, OW—H⋯O and O—H⋯OW interactions stabilize the molecular packing.     

Iron(III) complexes with 2-aminobenzothiazole: compounds governed by non-covalent interactions

Two new iron(III) coordination compounds with 2-aminobenzothiazole have been prepared and identified as (C₆H₄NHC(NH₂)S)₂[FeCl₄]Cl(H₂O) (1) and (C₆H₄NHC(NH₂)S)₃[Fe(C₂O₄)₃](H₂O)₂ (2). The compounds were characterized by thermogravimetric analysis in conjunction with evolved gases in air and spectroscopic studies. On the basis of quantum-mechanical calculations the interplay between two non-covalent interactions in 1, anion?···?π and ion-pair interactions, was analyzed.     

Crystal Structure and Characterization of a Large Polyoxotungstate (NH4)21{La(H2O)5[Ni(H2O)]2As4W40O140}·53H2O

The heteropolytungstate (NH4)₂₁{La(H₂O)₅[Ni(H₂O)]₂As₄W₄₀O₁₄₀}·53H₂O is obtained by the reaction of Na₂₇[NaAs₄W₄₀O₁₄₀]· 60H₂O with NiCl₂·6H₂O, La(NO₃)₃·6H₂O and NH₄Cl at pH‐4.5. The structure and chemical composition are determined by X‐ray diffraction analysis and elemental analysis. The crystal data and main structure refinement are a = 1.9551(3) nm, b = 2.4156(4) nm, c= 3.7068(6) nm, β = 91.505(3)°, V = 17.500 (5) nm³, monoclinic crystal system with space group P2₁/n, Z = 4, R₁ = 0.0573, wR₂ = 0.0717 [I >2<s?(I)], R₁, = 0.2463 and wR₂ = 0.1199 (all data). [La(H₂O)₅] {Ni(H₂O)}₂AS₄W₄₀O₁₄₀ has C₂, symmetry. IR spectra of the ligand [NaAs₄W₄₀O₁₄₀]^27‐ and its three complexes were discussed.     

rac‐3‐Benzoyl‐2‐methylpropionic acid and its organic salts: possibilities of Yang photocyclization in crystals

The analysis of the crystal structures of rac‐3‐benzoyl‐2‐methylpropionic acid, C₁₁H₁₂O₃, (I), morpholinium rac‐3‐benzoyl‐2‐methylpropionate monohydrate, C₄H₁₀NO⁺·C₁₁H₁₁O₃⁻·H₂O, (II), pyridinium [hydrogen bis(rac‐3‐benzoyl‐2‐methylpropionate)], C₅H₆N⁺·(H⁺·2C₁₁H₁₁O₃⁻), (III), and pyrrolidinium rac‐3‐benzoyl‐2‐methylpropionate rac‐3‐benzoyl‐2‐methylpropionic acid, C₄H₁₀N⁺·C₁₁H₁₁O₃⁻·C₁₁H₁₂O₃, (IV), has enabled us to predict and understand the behaviour of these compounds in Yang photocyclization. Molecules containing the Ar—CO—C—C—CH fragment can undergo Yang photocyclization in solvents but they can be photoinert in the crystalline state. In the case of the compounds studied here, the long distances between the O atom of the carbonyl group and the γ‐H atom, and between the C atom of the carbonyl group and the γ‐C atom preclude Yang photocyclization in the crystals. Molecules of (I) are deprotonated in a different manner depending on the kind of organic base used. In the crystal structure of (III), strong centrosymmetric O...H...O hydrogen bonds are observed.     

Synthesis, characterization and intercalation property of layered zirconium benzylamino-N,N-dimethylphosphonate phosphate materials

Layered zirconium benzylamino-N,N-dimethylphosphonate phosphate (ZBMPA) was prepared by the reaction of zirconyl chloride with benzylamino-N,N-dimethylphosphonic acid (H₂BMPA) and phosphoric acid in the presence of hydrofluoric acid. The intercalation of n-alkylamines (n-butylamine, n-heptylamine and n-decylamine) into ZBMPA was primarily investigated at room temperature. These materials were characterized by elemental analysis, ICP, XRD, SEM, FT-IR, Raman spectra, TG and DSC. The composition of ZBMPA is Zr(HPO₄)(C₆H₅CH₂N(CH₂PO₃)₂)_0.5 · 2.0H₂O. The interlayer distance of ZBMPA, n-butylamine, n-heptylamine and n-decylamine intercalation compounds is 2.03, 2.58, 2.52 and 3.17 nm, respectively. ZBMPA and the n-alkylamine intercalation compounds are different in the morphology and vibration spectra. Thermogravimetries of all materials obtained reveal three step mass losses at temperatures of up to 1000 °C. These results indicate that n-alkylamines are intercalated into the galleries of host ZBMPA.