On the mechanism of chlorobenzene hydrolysis over Cu promoted lanthanum phosphate

The reaction mechanism of chlorobenzene hydrolysis to produce phenol over Cu promoted lanthanum phosphate has been studied taking into account a parallel reaction through which benzene is formed. There is a competition for the adsorption sites between the reactants and the reaction products.

---

, , , . .

     

Hydrocarbon conversion on promoted rhodium/Al2O3 catalysts

In (E+Rh)/Al₂O₃ catalysts (E=Sn, Pb, Mo and W) the catalytic properties of rhodium in benzene hydrogenation, propane hydrogenolysis and n-hexane conversion change drastically. For modified rhodium the decrease in the hydrogenolysis rate of C–C bonds in paraffins leads to an increased yield of the products of non-destructive conversion of n-hexane.

---

(E+Rh)/Al₂O₃ (E:Sn, Pb, Mo, W) , , -. C–C -.

     

Ammoxidation of cyclohexanol to adiponitrile on vanadium oxide

The reaction pathway of ammoxidation of cyclohexanol to adiponitrile (ADN) on vanadium pentoxide catalyst has been investigated. ADN was produced directly via adipic acid obtained from oxidation of cyclohexanone. The main end-products were carbon dioxide and benzene.

---

() V₂O₅. , . .

     

Thermal properties of thiocyanatocopperc(II) complexes with picolines and lutidines

The thermal properties of coordination compounds of the composition Cu(NCS)₂L₂ (whereL=pyridine, 2-, 3- and 4-picoline, and 2,3-, 2,4-, 2,5-, 2,6-, 3,4- and 3,5-lutidine) are dealt with. The thermal decomposition of these compounds begins with the release of the ligandL. The compounds with pyridine derivatives containing a methyl substituent at position 2 show a markedly decreased initial decomposition temperature. It was found that X-ray irradiation caused a reduction of the central atom Cu(II) in the coordination compounds under investigation. X-ray electron spectra data showed the stability of the compounds Cu(NCS)₂L₂ withL=picoline or lutidine having a methyl substituent at position 2 to be distinctly lower in the surface layers. From the given series, the compounds Cu(NCS)₂(pyridine)₂ and Cu(NCS)₂(3,5-lutidine)₂ exhibit an analogous course of thermal decomposition in nitrogen atmosphere up to 600°. The stoichiometries of thermal decomposition are discussed.

---

Zusammenfassung Der Artikel befaßt sich mit den thermischen Eigenschaften von Koordi-nationsverbindungen der Zusammensetzung Cu(NCS)₂ L ₂ (L= Pyridin, 2-, 3-, 4-Pikolin, 2,3-, 2.4-, 2,5-, 2,6-, 3,4- und 3,5-Lutidin). Die thermische Zersetzung dieser Verbindungen beginnt mit der Abspaltung des LigandenL. Die Verbindungen mit Pyridinderivaten, welche einen Methylsubstituenten in Position 2 im Pyridinring enthalten, zeigen eine deutlich herabgesetzte anfängliche Zersetzungstemperatur. Es wurde gefunden, daß die Röntgenbestrahlung eine Reduktion des zentralen Cu(II)-Atoms bei den untersuchten Koordinationsverbindungen herbeiführte. Die Daten der Röntgen-Elektronenspektren zeigten, daß die Stabilität der Verbindungen Cu(NCS)₂L₂ mitL=Pikolin oder Lutidin, welche einen Methylsubstituenten in Position 2 enthalten, in den Oberflächenschichten wesentlich geringer ist. Von der gegebenen Reihe der Verbindungen zeigen Cu(NCS)₂(Pyridin)₂ und Cu(NCS)₂(3,5-Lutidin)₂ in Stickstoff-Atmosphäre bis zu 600° einen ähnlichen Verlauf der thermischen Zersetzung. Die Stöchiometrie ihrer thermischen Zersetzung wird beschrieben.

---

Résumé L'article a trait aux propriétés thermiques des composés de coordination de composition Cu(SCN)₂L₂ (L=pyridine, 2-, 3-, 4-picoline, 2,3-, 2,4-, 2,5-, 2,6-, 3,4-, 3,5-lutidine). La décomposition thermique de ces composés commence avec la libération du ligandL. Les composés avec des dérivés de la pyridine contenant un substituant méthyle en position 2 sur le cycle de la pyridine présentent une température initiale de décomposition qui se trouve abaissée de manière appréciable. On observe que le traitement aux rayons X provoque une réduction de l'atome central Cu(II) dans les composés de coordination étudiés. Les données fournies par les spectres électroniques des rayons X ont montré que la stabilité des composés Cu(SCN)₂L₂ avecL= picoline ou lutidine, ayant un substituant méthyle en position 2, est nettement plus faible dans les couches superficielles. Dans cette série de composés, Cu(SCN)₂ (pyridine)₂ et Cu(SCN)₂(3,5-lutidine)₂ montrent, en atmosphère d'azote, jusqu'à 600°, un processus analogue de décomposition thermique. La stoechiométrie de leur réaction de décomposition thermique est examinée.

---

Cu(NCS)₂L₂ L=, 2-, 3-, 4- , 2,3-, 2,4-, 2,5-, 2,6-, 3,4-, 3,5-. L. 2- . , , Cu(II). , Cu(NCS)₂L₂ c L= , 2, . Cu(NCS)₂ ( )₂ Cu(NCS)₂ (3,5-)₂ 600°. .

     

Liquid-phase hydrogenation of cyclohexene by dihydrogen in the presence of dimolybdenum tetraacetate

Catalytic liquid-phase hydrogenation of cyclohexene in DMF by dihydrogen in the presence of dinuclear bridged complex Mo₂(OAc)₄ has been studied. A kinetic equation for the steady-state rate of cyclohexene hydrogenation and the activation parameters are suggested.

---

Mo₂(OAc)₄. .

     

Determination of hydrogen chemisorbed on supported nickel catalysts by dimethyl zinc

Nickel supported on various metal oxides was titrated with dimethyl zinc tetrahydrofuranate at 130°C. The amount of hydrogen chemisorbed on nickel was evaluated from the amount of methane evolved after subtraction of OH groups of the support. The fraction of hydrogen bonded to nickel varied between 24–83 % of the overall hydrogen measured in dependence of support and correlated with activity of catalysts in the reaction of diethylene glycol with ammonia.

---

, , 130°C. , , OH . , , 24 83% .

     

Induction period of the conversion of methanol to hydrocarbons on a nickel loaded faujasite: Evidence for a suppression of the autocatalytic step

The conversion of methanol to hydrocarbons on nickel loaded faujasites can be retarded for many hours time-on-stream. The induction period is interpreted to be due to a suppression of the autocatalytic step of the reaction. An autocatalytic mechanism is proposed based on the -scission of branched carbenium ion intermediates.

---

. . , - .

     

Kinetics of oxidative sulfonation of butylamine in the presence of CuCl2

Kinetic regularities of butylamine sulfonation to N, N-dibutylsulfamide in the presence of copper(II) chloride have been studied. Reaction mechanism involves the formation of Cu(II) amine complexes, their subsequent interaction with SO₂ and the redox decomposition of an intermediate to final products.

---

N-N- (II). Cu(II), SO₂ - .

     

Tunnel recombination of surface and bulk radiation defects in finely dispersed CaO at 4.2 and 77 K

Recombination of radiation defects in CaO is shown to occur through electron tunneling from surface F_s ⁺ to V^–-center stabilized in the bulk.

---

, CaO F_s ⁺- V^–-, .

     

Diffusion of hydrocarbons in mordenite and molecular-sieve selectivity of mordenite catalysts

The diffusion of n-octane and n-propylbenzene in mordenite and the molecularsieve selectivity in hydrocracking of octane-propylbenzene binary mixtures over a mordenite catalyst have been studied. The hydrocarbon diffusivities and molecular-sieve selectivity change are accounted for by diffusion through mordenite channel mouths poisoned with an easily adsorbable hydrocarbon.

---

- , () -. , , .

     

Methods for finding steady-state solutions of mathematical models for chemico-technological schemes

Gradient and Newton methods are suggested for searching for steady-state solutions of chemico-technological schemes to obtain synthetic fuels.

---

- .

     

Kinetic model for methanol conversion over Mg-ZSM-5 zeolite

The catalytic conversion of methanol to olefins over ZSM-5 zeolite modified by ion exchange with Mg exhibits an autocatalytic character. On this basis an overall kinetic model of the reaction was proposed which allowed the determination of rate constants and apparent activation energy.

---

ZSM-5, Mg, . , .

     

Activation of magnesia by hydrogen spillover

Magnesia aerogel activated by hydrogen spillover at 430 °C or at 200 °C becomes a catalyst for the hydrogenation of ethylene. This catalytic activity, observed already at 50 °C, is further enhanced by a treatment in oxygen at 430 °C.

---

, 430 200°C, . 50°C 430°C.

     

Design and application of a liquid-flow adsorption micro calorimeter based on the Calvet-type DAK 1-1 microcalorimeter (USSR)

The construction and the properties of a liquid-flow adsorption microcalorimeter are described. The calorimeter is based on the commercially available Calvet-type DAK 1-1 microcalorimeter (USSR), which has been equipped with a flow system consisting of a pump, several sets of heat exchangers and an adsorption cell. The minimum detectable heat effect is 1W up to a flow rate of 30 cm³/h.Results on the application of the calorimeter to adsorption and desorption processes of nonionic (Triton X-100) and anionic (styrene phosphonic acid) surfactant solutions in water at an-Al₂O₃ surface are presented and discussed.

---

Zusammenfassung Konstruktion und Eigenschaften eines Flüssigkeits-Strömungs-Adsorptions-Mikrokalorimeters werden beschrieben. Das Kalorimeter wurde weiterentwickelt aus dem Calvet-Mikrokalorimeter DAK 1-1 (USSR), das mit einem Strömungssystem aus einer Pumpe, verschiedenen Wärmeaustauschern und einer Adsorptionszelle ausgestattet wurde. Der kleinste nachweisbare Wärmeeffekt liegt bei 1W bis zu einer Durchflussgeschwindigkeit von 30 cm³ h^–1. Mit dem Kalorimeter erhaltene Messergebnisse zur Adsorption und Desorption wässeriger Lösungen von nichtionischen (Triton X-100) und anionischen (Styrenphosphonsäuren) Tensiden an-Al₂O₃ werden dargestellt und diskutiert.

---

, 1-1 (), , , . 1 30 ³/. ( X–100) (- ) -l₂₃.

     

Influence of nucleating agents on crystallization of polypropylene

The effect of talc as an artificial nucleating agent in different concentrations on the crystallization of polypropylene (PP) has been studied. It is considered that the induction time should be taken into account in the Avrami evaluation of isothermal crystallization. From a study of nucleated PP samples prepared in different ways, it has been proved that the nucleating effect of talc slightly decreases with increasing time spent by the sample in the state of the polymer melt. It has been shown that crystallization of non-nucleated polypropylene strongly depends on the material of the sample pan. It has been established that dilatometry cannot be used to study the isothermal crystallization of nucleated polypropylene, since microcracks appear in the sample, partly compensating the volume decrease due to the crystallization process.

---

Zusammenfassung Die Wirkung von in unterschiedlichen Konzentrationen als künstliches Keimbildungsmittel angewandtem Talk auf die Kristallisation von Polypropylen wurde untersucht. Bei der Auswertung der isothermen Kristallisation nach Avrami ist die Induktionszeit in Betracht zu ziehen. Bei der Untersuchung von auf verschiedene Weise hergestellten Polypropylenproben wurde festgestellt, dass die keimbildende Wirkung von Talk desto geringer ist, je länger sich die polymere Probe im geschmolzenen Zustand befand. Es wird gezeigt, dass die Kristallisation von keimbilden den Mitteln nicht ausgesetztem Polypropylen stark vom Material des Probengefässes abhängt. Es wurde festgestellt, dass die Dilatometrie nicht zur Untersuchung der isothermen Kristallisatior von mit keimbildenden Mitteln versetztem Polypropylen geeignet ist, da in der Probe Mikrokrack Produkte auftreten, die die durch den Kristallisationsprozess verursachte Abnahme des Volumens teilweise kompensieren.

---

. , . , . . , , , .

---

---

This work was presented in part at the 7th International Conference on Thermal Analysis, August 22–28, 1982, Kingston, Ontario.

---

The authors are indebted to Messrs M. Pati and J. Volk for the preparation of the samples, and to Dr. A. Solti for her help during the dilatometric measurements.     

Capacité calorifique molaire du composé Bi.4 Te.6 dans les états solide et liquide

The heat capacities of Bi.4Te. 6 in the solid and liquid states are calculated from the results of the experimental drop calorimetric method, and the heat of fusion of the compound is deduced.

---

Zusammenfassung Die Wärmekapazitäten von Bi.4Te. 6 in fester und flüssiger Phase werden aus experimentellen Daten berechnet, die mit der tropfenkalorimetrischen Methode erhalten wurden. Die Schmelzwärme der Verbindung wird abgeleitet.

---

« » Bi₄Te₆ , .

     

Direct reading thermometric analysis

According to the direct reading thermometric method the concentration of the component to be determined is established from the temperature variation of the sample solution obtained on adding to it an excess of a reagent which reacts selectively with the respective component. Under suitably chosen experimental conditions the concentration of the respective component is determined from a single measured value. Since the established measurement technique requires little manual work and the respective components may be determined from the sample solution directly without any separations, the method in its present form is chiefly suitable for rapid serial analyses.

---

Zusammenfassung Bei der thermometrischen Methode mit Direktablesung wird die Konzentration der gesuchten Komponente aus der Temperaturänderung der Probelösung bestimmt, die nach Zugabe eines Überschusses von einem selektiv reagierenden Reagens wahrnehmbar ist.Unter geeigneten Versuchsbedingungen kann man die Konzentration der gesuchten Komponente aus einem einzigen Meßwert, nämlich der Temperaturänderung der Probelösung bestimmen. Da die ausgearbeitete Meßtechnologie wenig Arbeit erfordert und die gesuchten Komponenten ohne jede Trennung direkt bestimmt werden können, ist die Methode in ihrer jetzigen Ausführungsart hauptsächlich zu betriebsmäßigen Serien-Schnellanalysen geeignet.

---

Résumé Selon la méthode thermométrique à lecture directe, on détermine la concentration du constituant cherché d'après la variation de température de la solution échantillon que l'on additionne d'un excès de réactif sélectif de celui-ci. Dans les conditions expérimentales appropriées, une seule mesure suffit pour déterminer la concentration du constituant cherché. Comme la technique de mesure qui a été mise au point demande peu de travail et comme on peut doser sans aucune séparation les constituants étudiés, la méthode dans sa forme actuelle se prête en premier lieu aux dosages en séries industriels.

---

, , . . . , . .

     

Stability of hyperbolic reactors

For the one-phase tubular reactor, a new mathematical model is suggested, viz. a hyperbolic system of first order partial differential equations instead of the usual second order parabolic ones. This physically better model is investigated from the point of view of stability via the second Lyapunov method.

---

. .

     

Interrelation of addition reactions of hexachlorocyclopentadiene and bromine to N-arylimides of endo-and exo-bicyclo[2,2,1]hept-5-ene-2,3-dicarboxylic acids

A comparative analysis of the relative reactivities of N-arylimides of endo-and exobicyclo[2,2,1]hept-5-ene-2,3-dicarboxylic acids for the addition reactions of hexachlorocyclopentadiene and bromine has been carried out. According to different correlations the transition states of these two processes are shown to be similar.

---

N- - - [2,2,1] -5--2,3- . .

     

Determination of hydroxyl groups and/or water on the surface of oxide catalysts by a pulse chromatographic method

A pulse chromatographic method based on the reaction of gaseous dimethylzinc tetrahydrofura nate was developed for the determination of surface hydroxyl groups and/or adsorbed water in solid porous materials. The procedure is rapid and gives results comparable to other methods. Some heterogeneous catalysts and supports have been analyzed.

---

, , / , . , . .