Hierarchically Structure SnO2/ZnO Nanocomposites: Preparation,Growth Mechanism and Gas Sensing Property

SnO₂/ZnO nanocomposite was synthesized from mixed ethanol and water systems and the ethanol-sensing properties of sensors based on SnO₂/ZnO were investigated. The structure and morphology of the products was characterized by x-ray diffraction (XRD) and a field emission scanning electron microscope (FE-SEM). The results showed that the diameter of the liked pine needle SnO₂ was about 40 nm with a length about 300 nm, which are uniformly dispersed on the surface of the ZnO nanosheets. The growth process of the SnO₂/ZnO nanocomposite was discussed. The results of gas sensing properties of SnO₂/ZnO nanocomposite sensor showed high and quick response to ethanol vapor at 5.0 v. This sensor showed the advantages of high selectivity, strong stability, and prompt response/recovery characteristics in detecting ethanol vapor at 5.0 v.     

Synthesis,Characterization and Photocatalytic Application of TiO<Subscript>2</Subscript>/SnO<Subscript>2</Subscript> Nanocomposite Obtained Under Non-thermal Plasma Condition at Atmospheric Pressure

A plasma-assisted synthesis of TiO₂/SnO₂ nanocomposite is described. In this approach, a precursor containing a mixture of [TiCl₃ and SnCl₂] exposed to electric discharge was oxidized by plasma-generated reactive species (HO^·/H₂O = 2.85 eV/SHE). SnO₂ microstructures with a diameter of 10–40 µm were coated by thin layers TiO₂ nanorods with mean diameter of 6–8 nm. The obtained TiO₂/SnO₂ nanocomposite was characterized by transmission and scanning electron microscopy, X-ray diffraction and Fourier transform infrared. TiO₂/SnO₂ nanocomposite was found to be a promising new material for the photocatalytic discoloration of aqueous Remazol Brilliant Blue-R dye under daylight and UVA light sources, due to the combined effects of large specific surface area and heterojunction which efficiently separates the electron–hole pairs delaying the charge recombination. The leaching test indicated that the nanocomposite is stable easily reusable.     

SnO2 纳米棒的氧化还原特性

 利用室温固相反应在 NaCl-KCl 熔盐介质中, 通过焙烧含 SnO2 纳米颗粒前驱体合成了 SnO2 纳米棒, 并采用 X 射线衍射、扫描电镜、透射电镜、选区电子衍射和 X 射线光电子能谱对 SnO2 纳米棒进行了表征. 结果表明, SnO2 纳米棒是表面光滑、结晶完整的金红石结构单晶体, 直径为 10~20 nm, 长度为几百纳米到几个微米. 程序升温还原结果表明, SnO2 纳米棒具有较好的氧化还原性能和催化活性. 探讨了 SnO2 纳米棒的氧化还原机理.     

Sucrose assisted hydrothermal synthesis of SnO2/graphene nanocomposites with improved lithium storage properties

SnO₂/graphene nanocomposites are synthesized by a new hydrothermal treatment strategy under the assistance of sucrose. From the images of the scanning electron microscope (SEM) and transmission electron microscope (TEM), it can be observed that SnO₂ nanoparticles with the size of 4~5 nm uniformly distribute on the graphene nanosheets. The result demonstrates that sucrose can effectively prevent graphene nanosheets from restacking during hydrothermal treatment and subsequently treatment. The charging/discharging test result indicates that the SnO₂/graphene nanocomposites exhibit high specific capacity and excellent cycleability. The first reversible specific capacity is 729 mAh.g^?1 at the current density of 50 mA.g^?1, and remains 646 mAh.g^?1 after 30 cycles at the current density of 100 mA.g^?1, 30 cycles at the current density of 200 mA.g^?1, 30 cycles at the current density of 400 mA.g^?1, 30 cycles at the current density of 800 mA.g^?1, and 30 cycles at the current density of 50 mA.g^?1.     

纳米复合氧化物CuO·SnO2的制备与结构表征

0引言由于纳米材料在热学、电学、磁学、光学等方面具有的独特性能,使其在新功能材料、催化、光电能转换等许多领域引起了人们浓厚的研究兴趣[1]。近年来,纳米催化剂对固体推进剂的燃烧性能影响研究已成为热点[2～9]。但是由于固体推进剂燃烧的特殊性,要求不仅提高燃速,而且降低压力指数,因此并非所有的纳米催化剂都是有效的。大量实践已证明[10],多种催化剂的复合使用,将可获得远远优于单一催化剂的效果。研究已发现[11],纳米复合氧化物是由多种元素复合而成,使其在结构和性能上得到互补和叠加,加上纳米粒子所具有的各种效应,从而产生独特…     

Synthesis and gas sensitivities of SnO2 nanorods and hollow microspheres

SnO₂ urchin-like structures composed of nanorods with diameters of 10-15 nm and lengths of 50-70 nm have been hydrothermally synthesized via a H₂O₂-assisted route without any surfactant, using SnCl₂ as raw material. With the addition of methenamine (HMT), SnO₂ hollow microspheres with diameters of 2-3 μm and shell thickness of 60-140 nm were also prepared. The as-obtained products were examined using diverse techniques including X-ray powder diffraction (XRD), Raman spectroscopy, field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), selected-area electron diffraction (SAED), high-resolution TEM and photoluminescence spectra. The gas sensitivity experiments have demonstrated that the as-synthesized SnO₂ materials exhibit good sensitivity to alcohol vapors, which may offer potential applications in gas sensors.     

Flower-like SnO2 nanoparticles grown on graphene as anode materials for lithium-ion batteries

Tin oxide (SnO₂)/graphene composite was synthesized from SnCl₂?·?2H₂O and graphene oxide (GO) by a wet chemical-hydrothermal route. The GO was reduced to graphene nanosheet (GNS) and flower-like SnO₂ nano-crystals with size about 40 nm were homogeneously distributed on the surface of GNS. The SnO₂/graphene composites delivered a superior first discharge capacity of 1941.9 mAhg^?1 with a reversible capacity of 901.7 mAhg^?1 at the current density of 100 mAg^?1. Moreover, even at higher densities of 200 and 500 mAg^?1, the SnO₂/graphene composite still maintained enhanced cycling stability. After 40 cycles, the discharge capacity was still maintained at 691.1 mAhg^?1 at the current density of 100 mAg^?1. The SnO₂/graphene composite displayed an outstanding Li-battery performance with large reversible capacity and enhanced rate performance, which can be attributed to the highly uniform distribution of SnO₂ nanoparticles and high reduction degree of graphene. This result strongly indicates that the SnO₂/graphene composite was a promising anode material in high-performance lithium-ion batteries.     

Synthesis and Characterization of SnO2 Nanopowder Prepared by Precipitation Method

Tetragonal SnO₂ nanopowder of the range ～8 nm has been successfully synthesized by precipitation method. The prepared powder was characterized by thermogravimetry analysis (TGA), x-ray diffraction (XRD), transmission electron microscopy (TEM), Infrared spectroscopy (FTIR), x-ray photoelectron spectroscopy (XPS), diffuse reflectance spectroscopy (DRS), and room temperature photoluminescence (PL) spectroscopy. Experimental results show that the prepared powder was phase pure SnO₂ of tetragonal rutile structure without any impurities. The optical band gap was determined to be 4.26 eV, using diffuse reflectance technique with the aid of Kubelka-Munk relation. The blue shift of the band gap was attributed to the quantum size confinement effect.     

Synthesis and Characterization of SnO2 One-dimensional Nanostructures

Single-crystalline SnO2 nanowires have been successfully prepared in large scale on Au-coated silicon substrate by heating the mixture of self-made high-purity SnO2 powders and graphite powders at 900℃. Besides the line type nanowires some more features were observed. The products were characterized by means of X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED) and Raman spectrum techniques. The results indicate that the tin dioxide nanowires have a rutile structure with diameters ranging from 30 to 120 nm and lengths up to several tens of micrometers. The possible mechanism of the growth and reaction for the nanowires was also discussed.     

Capped semiconductor colloids: Synthesis and photochemistry of CdS capped SnO2 nanocrystallites

Cds-capped SnO₂ (CdS@SnO₂) and SiO₂ (CdS@SiO₂) colloids of 50–80 ? in diameter have been prepared in aqueous medium. Significant quenching of CdS emission is observed in the CdS@SnO₂ system as the electrons are injected from the excited CdS shell into the SnO₂ core. Photoinduced charge separation in this system also results in transient bleaching in the 450 nm region. Picosecond laser flash photolysis studies of composite semiconductor nanoclusters that highlight the effect of the metal oxide core on the photophysical properties of the outer CdS shell are described. Contribution No. 3961 from the Notre Dame Radiation Laboratory, USA     

SnO2@MWCNT nanocomposite as a high capacity anode material for sodium-ion batteries

We report the synthesis and characterization of SnO₂@multiwalled carbon nanotubes (MWCNTs) nanocomposite as a high capacity anode material for sodium-ion battery. SnO₂@MWCNT nanocomposite was synthesized by a solvothermal method. SEM and TEM analyses show the uniform distribution of SnO₂ nanoparticles on carbon nanotubes. When applied as anode materials in Na-ion batteries, SnO₂@MWCNT nanocomposite exhibited a high sodium storage capacity of 839 mAh g^− 1 in the first cycle. SnO₂@MWCNT nanocomposite also demonstrated much better cycling performance than that of bare SnO₂ nanoparticles and bare MWCNTs. Furthermore, the nanocomposite electrode also showed a good cyclability and an enhanced Coulombic efficiency on cycling.     

Effect of SnO2 Nanocrystals on the Emission of Eu3+ Ions in Silica Matrix

Silica xerogels containing Eu³⁺ ions and SnO₂ nanocrystals were prepared in the sol‐gel process, and characterized by x‐ray diffraction (XRD) and photoluminescence spectra. Under the excitation at 393 nm, characteristic emission of Eu³⁺ ions at 614 nm was enhanced with increasing amount of SnO₂ nanocrystals. Moreover, when the Eu³⁺/SnO₂ co‐doped samples were excited at 345 nm, corresponding to the sideband of SnO₂ nanocrystals, the emission of Eu³⁺ ions at 614 nm was clearly observed, while no emission of Eu³⁺ ions for the Eu³⁺‐doped sample. It may be ascribed to the energy transfer from SnO₂ conduction band to Eu³⁺ conduction band. Further experimental results suggest that the energy transfer may be achieved through surface transition state.     

Synthesis of mesoporous SnO2 nanomaterials with selective gas-sensing properties

Using SBA-15/KIT-5/KIT-6 as the hard templates, the mesoporous SnO₂ nanomaterials with different structures were synthesized by nanocasting. X-ray diffraction, transmission electron microscopy, and nitrogen adsorption isotherms were used to testify their structure characteristics. These mesoporous SnO₂ nanomaterials showed high specific surface areas (57–96 m² g^?1) and pore volume (0.17–0.27 cm³ g^?1). The nanopore of these templates makes the nanosize particle of the final mesoporous SnO₂ nanomaterials (4–9 nm) at last. The sensing properties of acetone, ethyl alcohol and methyl alcohol were investigated. The response of SnO₂-15, SnO₂-5, and SnO₂-6 are 17.0, 19.5, and 16.1, respectively as the concentration of ethyl alcohol on 200 ppm. The sensitivity of SnO₂-5 is 28.2 as the concentration of acetone was increased to 200 ppm. With the large surface area, high pore volume, and nanosized particles (close to 2 L = 6 nm of SnO₂), the SnO₂-5 show four fold enhancement in sensitivity compared to commercial SnO₂ powder and low detection limit (even at 200 ppb). The surface area and particle size play a significant party in the gas response. With the large surface area and smallest particle size, SnO₂-5 shows the highest sensitivity of all. These mesoporous nanomaterials show well potential application on the gas response.     

One-step hydrothermal synthesis of flower-like SnO2/carbon nanotubes composite and its electrochemical properties

In this work, flower-like SnO₂/carbon nanotubes (CNTs) composite was synthesized by one-step hydrothermal method for high-capacity lithium storage. The microstructures of products were characterized by XRD, FESEM and TEM. The electrochemical performance of the flower-like SnO₂/CNTs composite was measured by cyclic voltammetry and galvanostatic charge/discharge cycling. The results show that the flower-like SnO₂/CNTs composite displays superior Li-battery performance with large reversible capacity and high rate capability. The first discharge and charge capacities are 1,230 and 842 mAh g^?1, respectively. After 40 cycles, the reversible discharge capacity is still maintained at 577 mAh g^?1 at the current densities of 50, 100 and 500 mA g^?1, indicating that it’s a promising anode material for high performance lithium-ion batteries.     

Hierarchical chlorine-doped rutile TiO2 spherical clusters of nanorods: Large-scale synthesis and high photocatalytic activity

In this study, we report the synthesis of hierarchical chlorine-doped rutile TiO₂ spherical clusters of nanorods photocatalyst on a large scale via a soft interface approach. This catalyst showed much higher photocatalytic activity than the famous commercial titania (Degussa P25) under visible light (λ>420 nm). The resulting sample was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution TEM (HRTEM), nitrogen adsorption, X-ray photoelectron spectroscopy (XPS), UV-vis diffuse reflectance spectroscopy, ¹H solid magic-angle spinning nuclear magnetic resonance (MAS-NMR) and photoluminescence spectroscopy. On the basis of characterization results, we found that the doping of chlorine resulted in red shift of absorption and higher surface acidity as well as crystal defects in the photocatalyst, which were the reasons for high photocatalytic activity of chlorine-doped TiO₂ under visible light (λ>420 nm). These hierarchical chlorine-doped rutile TiO₂ spherical clusters of nanorods are very attractive in the fields of environmental pollutants removal and solar cell because of their easy separation and high activity.     

Composite of Pt–Ru supported SnO2 nanowires grown on carbon paper for electrocatalytic oxidation of methanol

Platinum–ruthenium (Pt–Ru) nanoparticles were successfully deposited, for the first time, on the surface of SnO₂ nanowires grown directly on carbon paper (Pt–Ru/SnO₂ NWs/carbon paper) by potentiostatic electrodeposition method. The resultant Pt–Ru/SnO₂ NWs/carbon paper composites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD). The electrocatalytic activities of these composite electrodes for methanol oxidation were investigated and higher mass and specific activities in methanol oxidation were exhibited as compared to Pt–Ru catalysts deposited on glassy carbon electrode.     

Hierarchical SnO2 with double carbon coating composites as anode materials for lithium ion batteries

Hierarchical SnO₂ with double carbon coating (polypyrrole-derived carbon and reduced graphene oxide in order) composites have been successfully synthesized as anode materials for lithium ion batteries. The composites were characterized and examined by X-ray diffraction, scanning electron microscopy, thermogravimetric analysis, cyclic voltammetry, and galvanostatic discharge/charge tests. Such a novel nanostructure can not only provide a high conductivity but also prevent aggregation of SnO₂ nanoparticles, leading to the improvement of the cycling performance. Comparing with pure hierarchical SnO₂ and polypyrrole-derived carbon-coated hierarchical SnO₂, hierarchical SnO₂ with double carbon coating composite exhibits higher lithium storage capacities and better cycling performance, 554.8 mAh g^?1 after 50 cycles at a current density of 250 mA g^?1. In addition, the rate performance of hierarchical SnO₂ with double carbon coating composite is also very well. For all the improved performances, this double carbon coating architecture may provide some references for other electrode materials of lithium ion batteries.     

Fabrication and photocatalytic properties of SnO2 double-shelled and triple-shelled hollow spheres

SnO₂ double-shelled and triple-shelled hollow spheres were tailored by adjusting concentration of tin (IV) chloride solution during the process of the tin (IV) ions infused carbonaceous spheres. The structures of these SnO₂ multi-shelled hollow spheres were examined by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and their possible formation mechanism were also discussed. In virtue of triple-shelled hollow porous structure and higher specific surface area, SnO₂ triple-shelled hollow spheres exhibited enhanced photocatalytic properties compared to SnO₂ double-shelled hollow spheres.     

A Simple Precursor-Assisted Preparation of Flowerlike SnO2 Nanostructures

A simple dissolution-renucleation process of SnC₂O₄ crystals was explored to prepare SnO₂ nanostructures. By controlling supersaturation of SnC₂O₄ crystals, nucleus surface/solution interfacial energy, and other reaction parameters, including concentration of a reactant, volume of water, and the amount of poly(ethyleneglycol), a series of SnC₂O₄ nanostructures could be obtained. A dissolution-renucleation growth mechanism of the flowerlike SnC₂O₄ nanostructures was suggested and discussed in detail. The results showed that the poly(ethyleneglycol) played an important role in tuning the SnC₂O₄ nanostructures. Meanwhile, high concentration of SnCl₂ in the mixed solvent of ethanol and poly(ethyleneglycol), and a large amount of water were favorable to the formation of the flowerlike SnC₂O₄.     

Nonenzymatic H2O2 Electrochemical Sensor Based on SnO2‐NPs Coated Polyethylenimine Functionalized Graphene

This paper demonstrated using polyethylenimine (PEI)‐functionalized graphene (Gr) incorporating tin oxide (SnO₂) hybrid nanocomposite as a platform for nonenzymatic H₂O₂ electrochemical sensor. The results of UV‐vis spectroscopy and X‐ray diffraction (XRD) confirmed the simultaneous formation of tin oxide (SnO₂) nanocomposite and reduction of graphene oxide (GO). Transmission electron microscopy (TEM) images showed a uniform distribution of nanometer‐sized tin oxide nanoparticles on the grapheme sheets, which could be achieved using stannous chloride (SnCl₂) complex instead of tin oxide as precursor. The electrochemical measurements, including cyclic voltammetry (CV) and amperometric performance (I‐t), showed that the PEI‐functionalized Gr supported SnO₂ (SnO₂‐PEI‐Gr) exhibited an excellent electrocatalytic activity toward the H₂O₂. The corresponding calibration curve of the current response showed a linear detection range of 9×10⁻⁶∼1.64×10⁻³ mol L⁻¹, while the limit of detection was estimated to be 1×10⁻⁶ mol L⁻¹. Electrochemical studies indicated that SnO₂ and functionalized Gr worked synergistically for the detection of H₂O₂.