中空介孔二氧化硅锚固聚偕胺肟吸附Cr(Ⅵ)

以硝酸铈铵为引发剂,在自制的中空介孔二氧化硅(HMS)的空腔和通道内引发丙烯腈自由基聚合,并将其氰基偕胺肟化,用于制备具有吸附Cr(Ⅵ)的廉价有机无机复合吸附材料——中空介孔二氧化硅锚固聚偕胺肟.通过傅里叶变换红外光谱(FTIR)、扫描电子显微镜(SEM)及N_2吸附-脱附比表面分析对中空介孔二氧化硅锚固聚偕胺肟进行表征.结果表明,制备的中空微球直径约为400 nm,其壁上孔径约为11.0 nm,比表面积约为431 m~2/g,锚固聚偕胺肟后中空微球壁上孔道直径约为4.6 nm,比表面积降低为347 m~2/g.HMS锚固的聚偕胺肟对重铬酸钾溶液中铬的吸附量高达0.46 mmol/g,吸附过程中伴随化学反应,符合伪二级动力学模型,可用作废水处理中重金属离子的高效廉价吸附材料.     

中空介孔二氧化硅锚固聚偕胺肟吸附Cr(Ⅵ)

以硝酸铈铵为引发剂, 在自制的中空介孔二氧化硅(HMS)的空腔和通道内引发丙烯腈自由基聚合, 并将其氰基偕胺肟化, 用于制备具有吸附Cr(Ⅵ)的廉价有机无机复合吸附材料—中空介孔二氧化硅锚固聚偕胺肟. 通过傅里叶变换红外光谱(FTIR)、 扫描电子显微镜(SEM)及N₂吸附-脱附比表面分析对中空介孔二氧化硅锚固聚偕胺肟进行表征. 结果表明, 制备的中空微球直径约为400 nm, 其壁上孔径约为11.0 nm, 比表面积约为431 m²/g, 锚固聚偕胺肟后中空微球壁上孔道直径约为4.6 nm, 比表面积降低为347 m²/g. HMS锚固的聚偕胺肟对重铬酸钾溶液中铬的吸附量高达0.46 mmol/g, 吸附过程中伴随化学反应, 符合伪二级动力学模型, 可用作废水处理中重金属离子的高效廉价吸附材料.     

聚合物基模板制备中空介孔材料

中空介孔材料,尤其是硅基和碳基中空介孔材料,由于其孔道结构丰富、孔径可调、高比表面积、可容纳客体分子、良好的热稳定性和化学稳定性等特点已被广泛应用于催化、能量储存等众多领域。模板法是目前为止制备中空介孔结构最有效的方法之一,其最大特点是可以通过对模板的调控来实现对中空介孔结构的控制。聚合物基模板种类繁多,主要包括嵌段共聚物、聚合物乳胶粒、天然/合成生物大分子及复杂结构高分子等;与传统的表面活性剂/无机氧化物模板相比,其自组装形态更加丰富,结构更易进行功能化修饰。同时,以聚合物为模板的合成反应条件更加温和可控,更有利于合成形态各异、功能丰富的中空介孔材料。本文综述了近年来不同聚合物基模板合成中空介孔材料的研究进展,并着重介绍了贵金属粒子负载的中空介孔材料在催化载体领域的应用;同时,指出了当前阻碍中空介孔材料发展的问题,并对其在催化领域的应用前景进行了展望。     

无机中空球的分类、合成方法及应用

中空球是壳层结构材料的一个重要分支。与实心球相比较,中空球具有更多特殊和优异的物理及化学性质,例如具有较小的密度、较大的比表面积以及较好的稳定性和表面渗透性,其中无机中空球较有机中空球还具有耐高温、抗老化等优点。因此,近些年来无机中空球备受人们的关注,广泛应用于催化、电池、医药等众多领域。本文结合本课题组在无机氧化物中空球领域的研究和前人的工作,总结了近5年来制备无机中空球的研究进展。将无机中空球的壳层材料分为五大类,包括:无机氧化物、硫化物及硒化物、金属单质、复合物和其他无机材料。将制备方法分成四大类:硬模板法、软模板法、牺牲模板法和无模板法,对每一大类又进一步细分,并且指出了各种方法的优缺点。同时归纳了无机中空球几个重要的应用领域,如药物、电池、气体传感器和光催化领域。最后在此基础上简要展望了无机中空球的研究前景。     

中空介孔硅铝球形分子筛的制备及催化裂解性能

利用沸石前驱体溶液和介孔硅球(MSS)为原料,通过水热法成功制备了具有中强酸性介孔壳的中空介孔硅铝球形分子筛(HMAS)。利用透射电镜(TEM)、扫描电镜(SEM)、X射线衍射(XRD)、N2-吸脱附、27Al核磁共振(27Al NMR)及NH3程序升温脱附(NH3-TPD)对材料的结构和性能进行了表征。研究结果表明,在MSS的中空过程中伴随有物质再分配和介孔结构的逐渐演变。MSS介孔孔道中的十六烷基三甲基溴化铵(CTAB)分子,一方面保护MSS免遭强碱性沸石前驱体溶液的溶蚀,另一方面作为形成HMAS介孔壳层的模板剂。在此CTAB分子的作用下,沸石前驱体结构单元被引入到HMAS的介孔球壳上。所得材料具有介孔结构和中强酸性,在催化裂解1,3,5-三异丙苯反应中表现出优异的催化性能。     

中空介孔硅铝球形分子筛的制备及催化裂解性能

利用沸石前驱体溶液和介孔硅球(MSS)为原料, 通过水热法成功制备了具有中强酸性介孔壳的中空介孔硅铝球形分子筛(HMAS)。利用透射电镜(TEM)、扫描电镜(SEM)、X射线衍射(XRD)、N₂-吸脱附、²⁷Al核磁共振(²⁷Al NMR)及NH₃程序升温脱附(NH₃-TPD)对材料的结构和性能进行了表征。研究结果表明, 在MSS的中空过程中伴随有物质再分配和介孔结构的逐渐演变。MSS介孔孔道中的十六烷基三甲基溴化铵(CTAB)分子, 一方面保护MSS免遭强碱性沸石前驱体溶液的溶蚀, 另一方面作为形成HMAS介孔壳层的模板剂。在此CTAB分子的作用下, 沸石前驱体结构单元被引入到HMAS的介孔球壳上。所得材料具有介孔结构和中强酸性, 在催化裂解1, 3, 5-三异丙苯反应中表现出优异的催化性能。     

中空纳米二氧化硅微球的制备及表征

本文介绍了一种制备中空纳米二氧化硅微球的新方法。利用模板首先合成介孔纳米二氧化硅微球,再用水热反应法,成功制备了非功能化和巯基、氨基功能化中空纳米二氧化硅微球。利用透射电子显微镜,热重分析等手段对其形貌进行了表征。另外,对中空介孔纳米二氧化硅微球的形成机制进行了探讨。     

无机多孔材料的合成及其在环境催化领域的应用

无机多孔材料因其具有特殊的物化性能在化工、能源、环保等相关领域被广泛应用。本文总结了无机多孔材料的当前研究进展,详细介绍了微孔、介孔、大孔材料和大孔-介孔、大孔-微孔、介孔-微孔以及大孔-介孔-微孔等复合孔材料的制备方法,并介绍了无机多孔材料在室内、外等环保催化领域的应用,特别介绍了多孔材料对于消除移动源污染的应用。最后,对当前无机多孔材料在制备方面存在的问题进行了总结,并对今后无机多孔材料的制备方法和研究方向进行了展望。     

微乳液法合成沸石/介孔二氧化硅复合微球

利用简单微乳液自组装体系, 制备了介孔二氧化硅与Y型或Ti-MWW沸石晶体复合形成的沸石/介孔二氧化硅微球(ZMMS). 硅源正硅酸四丁酯与阳离子型季铵盐表面活性剂形成稳定的O/W微乳液形成大颗粒, 沸石颗粒由于疏水作用而进入油相, 同时, 季铵盐表面活性剂和正硅酸四丁酯组装形成介孔材料. 优化合成条件可以有效控制复合微球的沸石/介孔二氧化硅质量比(0～2.3)和直径(186～965 μm). 两种沸石/介孔二氧化硅复合微球材料的介孔孔径分别为3.98 nm(Y型沸石)和3.75 nm (Ti-MWW型沸石). Ti-MWW沸石/介孔二氧化硅复合微球在液相催化环氧化反应中表现出良好的机械强度, 并且能够达到与Ti-MWW沸石原粉相当的催化活性.     

复合介孔二氧化硅膜的制备及应用

复合介孔二氧化硅膜是近十年来发展起来的一种具有独特孔中孔结构的新型膜材料。该材料以多孔膜（无机多孔膜或者有机多孔膜）为硬模板,以表面活性剂为结构导向剂,通过溶胶-凝胶等方法将介孔二氧化硅材料组装在多孔膜的孔道中制备而成。由于其具有不同于传统介孔二氧化硅膜材料的一些独特结构和性能,并在分离、吸附和催化等领域具有广泛的应用前景,引起了人们广泛的关注。本文主要就复合介孔二氧化硅膜的制备方法,特别是近几年内其在纳滤、纳米材料的模板合成、酶的固定、传感器、反应器以及药物释放等方面最新的应用研究进展进行论述,同时对这类新型的复合介孔二氧化硅膜材料在合成和应用方面存在的问题进行了分析和总结,并对其发展前景作了展望。     

Use of carbonaceous polysaccharide microspheres as templates for fabricating metal oxide hollow spheres

A general method for the synthesis of metal oxide hollow spheres has been developed by using carbonaceous polysaccharide microspheres prepared from saccharide solution as templates. Hollow spheres of a series of metal oxides (SnO2, Al2O3, Ga2O3, CoO, NiO, Mn3O4, Cr2O3, La2O3, Y2O3, Lu2O3, CeO2, TiO2, and ZrO2) have been prepared in this way. The method involves the initial absorption of metal ions from solution into the functional surface layer of carbonaceous saccharide microspheres; these are then densified and cross-linked in a subsequent calcination and oxidation procedure to form metal oxide hollow spheres. Metal salts are used as starting materials, which widens the accessible field of metal oxide hollow spheres. The carbonaceous colloids used as templates have integral and uniform surface functional layers, which makes surface modification unnecessary and ensures homogeneity of the shell. Macroporous films or cheese-like nanostructures of oxides can also be prepared by slightly modified procedures. XRD, TEM, HRTEM, and SAED have been used to characterize the structures. In a preliminary study on the gas sensitivity of SnO2 hollow spheres, considerably reduced "recovery times" were noted, exemplifying the distinct properties imparted by the hollow structure. These hollow or porous nanostructures have the potential for diverse applications, such as in gas sensitivity or catalysis, or as advanced ceramic materials.     

Production of complex cerium-aluminum oxides using an atmospheric pressure plasma torch

Ceria-alumina particles of a wide variety of structures, from micrometer-sized hollow spheres to nanoparticles, were produced from aerosols of different natures, but all derived from nitrate salts passed through a low power (<1000 W) atmospheric pressure plasma torch. The amount of water present with the nitrate salts was found to significantly affect the morphology of the resulting material. A model was proposed that explains the mechanism in which water acts as a blowing agent to create hollow metal oxide spheres that then shatter to form metal oxide nanoparticles. Further examination of the nanoparticles revealed that they display a core/shell morphology in which the core material is crystalline CeO2 and the shell material is amorphous Al2O3. These unique core/shell materials are interesting candidates for catalyst support materials with high thermal durability. In addition, experiments have shown that the nanoparticles can be readily converted into CeAlO3 perovskite.     

Synthesis and Photoluminescence Properties of Uniform Y2O3:Eu3+ Hollow Spheres with Tunable Shell Thickness

Y2O3:Eu3+ hollow spheres were successfully prepared with melamine formaldehyde(MF) spheres as template. The MF spheres played a significant role in directing the formation of the hollow shells which are composed of numerous primary nanoparticles. Furthermore, the shell thickness of these hollow spheres could be readily tailored by adjusting the dosage of MF template. Based on the photoluminescence(PL) investigation, the red emission intensities(613 nm) of these Y2O3:Eu3+ hollow spheres are greatly influenced by their shell thickness and it was found that hollow spheres with thin shell thickness and intact hollow structures permit a better PL performance.     

碳空心球/硫复合材料制备和电化学性能研究

采用PMMA为模板制备碳空心球材料,并以碳空心球材料为导电骨架与硫材料复合制得碳空心球/硫复合材料. SEM和TEM照片显示,硫材料能均匀地填充在碳空心球的孔道和腔体内部. 采用恒电流充放电测试碳空心球/硫复合电极的电化学性能. 结果表明,在100 mA·g^-1、500 mA·g^-1、1 A·g^-1、2 A·g^-1 和5 A·g^-1电流密度下,碳空心球/硫复合电极可逆放电容量分别为1145 mAh·g^-1、824 mAh·g^-1、702 mAh·g^-1、586 mAh·g^-1和395 mAh·g^-1,呈现出较优异的倍率循环寿命.     

Synthesis of stable hollow silica microspheres with mesoporous shell in nonionic W/O emulsion

Stable hollow silica microspheres were synthesized by a solgel method in nonionic W/O emulsion; the mesoporous shell wall of the spheres could have potential applications as controlled release capsules for drugs, dyes, cosmetics and inks, artificial cells, catalysts, and fillers.     

新型氧化铝空心球的制备及表征

以胶体碳球为模板, 廉价的硝酸铝为铝源, 成功制备出了新型的大小可控的氧化铝空心球. 通过透射电子显微镜(TEM)、扫描电子显微镜(SEM)、能量扩散X射线(EDX)、X射线粉末衍射(XRD)等手段对合成产品进行了表征, 并考察了不同合成条件对空心球形貌的影响. 实验结果表明, 合成的氧化铝空心球大小均一, 粒径及壁厚均可调节. 在该实验条件下, 硝酸铝浓度及吸附时间的改变对产品结果没有明显的影响, 而吸附温度的改变引起了产品表面光滑度及壁厚的改变.     

基于pH响应型微凝胶模板的二氧化锰空心球制备

以pH响应型微凝胶为模板制备出了二氧化锰空心球材料,并利用XRD、TGA、SEM、FT—IR和TEM等手段对其进行了表征．结果表明,通过调节KMn04的用量可以有效控制二氧化锰空心球的球壳厚度．对洗脱后上层清夜中的pH响应型微凝胶进一步研究发现,部分微凝胶呈现出非可逆的膨胀一收缩转变,这一现象主要是由于其内部的交联程度不高造成的．在对表征结果进行分析后提出了空心球结构的形成机理．     

Aerosol assisted synthesis of silica/phenolic resin composite mesoporous hollow spheres

Hollow spheres of phenolic resin/silica composite are synthesized by macroscopic phase separation of a sorbitan monooleate surfactant Span 80 during aerosol-assisted spraying. The cavity can be evolved from multiple compartments to single hollow cavity with the increase of Span 80 content. The composite shell becomes mesoporous due to the release of small molecules after thermal treatment above 350 °C. After further thermal treatment at a higher temperature for example 900 °C in nitrogen or 1,450 °C in argon, the carbon/silica composite hollow spheres or crystalline silicon carbide hollow spheres are derived, respectively. Compared to the pure phenolic resin-based carbon spheres, thermal stability of the carbon-based composite spheres in air is essentially improved by the introduction of inorganic component silica. The carbon-based composite hollow spheres combine both performances of easy mass transportation through macropores and high specific surface area of mesopores, which will be promising to support catalysts for fuel cells. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Synthesis of micron-sized hollow silica spheres with a novel mesoporous shell of MCF

Micron-sized hollow silica spheres whose shells are made up of mesocellular silica foams(MCFs) have been synthesized by one-pot sol-gel method in benzene/water/P123 emulsion.The material is characterized with SEM,TEM,BET and ~(29)Si MAS NMR. The results show that the MCFs of the unique shell of hollow silica spheres were connected by large windows with a narrow distribution of～10 nm in diameter,the inner space of the hollow sphere is accessible.And the formation mechanism of the hollow silica spheres is ...     

Low‐Temperature Facile Template Synthesis of Crystalline Inorganic Composite Hollow Spheres

This report presents a facile approach for the low‐temperature synthesis of crystalline inorganic‐oxide composite hollow spheres by employing the bulk controlled synthesis of inorganic‐oxide nanocrystals with polymer spheres as templates. The sulfonated polystyrene gel layer can adsorb the target precursor and induce inorganic nanocrystals to grow on the template in situ. The crystalline phase and morphology of the composite shell is tunable. By simply adjusting the acidity of the titania sol, crystalline titania composite hollow spheres with tunable crystalline phases of anatase, rutile, or a mixture of both were achieved. The approach is general and has been extended to synthesize the representative perovskite oxide (barium and strontium titanate) composite hollow spheres. The traditional thermal treatment for crystallite transformation is not required, thus intact shells can be guaranteed. The combination of oxide properties such as high refractive index, high dielectric constant, and catalytic ability with the cavity of the hollow spheres is promising for applications such as opacifiers, photonic crystals, high‐κ‐gate dielectrics, and photocatalysis.