Darstellung und Eigenschaften von Ti-substituierten N-Heterocyclen

Preparation and Properties of Ti-substituted N-Heterocycles The compounds (x = 2 to 6) have been prepared by transamination of Ti(NMe₂)₄ with the heterocyclic amines and have been characterised by elemental analyses and ¹H NMR and IR spectroscopy. The dependence on both x and n of the thermal decomposition has been studied for the series and . The results can be interpreted in terms of the steric strain of the R₂N and substituents. Apart from the piperidido groups none of the ligands exhibit protective group properties comparable to the R₂N groups.     

Kinetics of the First Order Autocatalytic Decomposition Reaction of Nitrocellulose （13.86% N）

The kinetics of the first order autocatalytic decomposition reaction of nitrocellulose (NC, 13.86% N) was studied by using DSC. The results show that the DSC curve for the initial 50% of conversion degree of NC can be de scribed by the first order autocatalytic equation dy/dt =-10^16.3 exp (-181860/RT)y-10^16.7ex(-173050/RT)y(1-y) and that for the latter 50% conversion degree of NC described by the reaction equations dy/dt=-10^16.4exp(-154820/RT)y (n=1) and dy/dt=-10^16.9 exp(-155270/RT) y^2.80(n≠1).     

Cyclometalated Compounds of Platinum(II) with two different C,N-aromatic ligands

A synthetic route leading to bis-heteroleptic cyclometalated complexes is described. The complexes [2-(2′-thienyl)pyridinato-N, C-^3′]{2-[3′-(trimethylsilyl)2′-thienyl]pyridinato-N, C^3′}platinum(II) ([Pt(thpy) (TMS-thpy)]; I ) and (l-phenylpyrazolato-N², C^2′)[2-(2′-thienyl)pyridinato-N, C^3′]platinum ([Pt(Phpz)(thpy)]; II ) are characterized by UV/VIS, NMR, and mass spectroscopy. Thermal and photochemical oxidative addition reactions yield two out of the 10 possible pairs of enantiomers of octahedral Pt(IV) compounds.     

Structure of the tetramer of α-methylstyrene

The structure of the tetrameric dianion formed by α-methylstyrene in tetrahydrofuran by reaction with sodium has been examined. Mass spectral, NMR, infrared, and kinetic data all indicate that the structure is rather than the structure which had previously been assumed for this species.     

Massenspektrometrische Untersuchung organischer Stickstoffverbindungen. XXVII—Intramolekulare Redoxreaktionn bei ionisierten ortho-substituierten Nitroaromaten

Collisional activation demonstrates that the stable ions from o-nitrobenzaldehydedimethylacetale possess the structure of ionized o-nitroso benzoic acid methyl ester. Contrary to previous conclusions it is demonstrated that the structure of the stable ions (m/e 135) from different precursors [i.e. o-nitrobenzyl alcohol o-nitrobenzyl cyanide and o-nitrobenzaldoxime is best represented by 2,1-benzisoxazoline-3-one. Ionized o-nitrosobenzaldehtde rearranged to 2,1-benzisoxazoline-3-one prior to collision induced decomposition, whereas 2-benzoxazolinone and 3-hydroxy-1,2-benzisoxazole do not rearrange within 10^?5 s.     

Hyperbranched PEG by Random Copolymerization of Ethylene Oxide and Glycidol

The synthesis of hyperbranched poly(ethylene glycol) (hbPEG) in one step was realized by random copolymerization of ethylene oxide and glycidol, leading to a biocompatible, amorphous material with multiple hydroxyl functionalities. A series of copolymers with moderate polydispersity ( < 1.8) was obtained with varying glycidol content (3–40 mol‐%) and molecular weights up to 49 800 g mol⁻¹. The randomly branched structure of the copolymers was confirmed by ¹H and ¹³C NMR spectroscopy and thermal analysis (differential scanning calorimetry). MTS assay demonstrated low cell toxicity of the hyperbranched PEG, comparable to the highly established linear PEG.

     

Acrylonitrile‐Butadiene Rubber (NBR) Prepared via Living/Controlled Radical Polymerization (RAFT)

In the current work we present results on the controlled/living radical copolymerization of acrylonitrile (AN) and 1,3‐butadiene (BD) via reversible addition fragmentation chain transfer (RAFT) polymerization techniques. For the first time, a solution polymerization process for the synthesis of nitrile butadiene rubber (NBR) via the use of dithioacetate and trithiocarbonate RAFT agents is described. It is demonstrated that the number average molar mass, , of the NBR can be varied between a few thousand and 60 000 g · mol⁻¹ with polydispersities between 1.2 and 2.0 (depending on the monomer to polymer conversion). Excellent agreement between the experimentally observed and the theoretically expected molar masses is found. Detailed information on the structure of the synthesized polymers is obtained by variable analytical techniques such as infrared spectroscopy (IR), nuclear magnetic resonance (NMR) spectroscopy, differential scanning calorimetry, and electrospray ionization‐mass spectrometry (ESI‐MS).

     

Modification of poly(vinyl alcohol) through reaction with phosphorus-containing reactants

Crosslinked products of the form: and have been formed from the interfacial condensation of phosphorus diacid halides with poly(vinyl alcohol). Product yield and amounts of phosphorus reactant included in the product increases as the amount of base increases. Product stability in aqueous systems decreases in the order neutral > base > acid.     

Synthesis,Microstructure, and Acidity of Poly(vinylphosphonic acid)

Summary: Vinylphosphonic acid is polymerized at 80 °C by free radical polymerization to give a high‐molecular‐weight polymer ( of 6.2 × 10⁴) as determined by static light scattering. High‐resolution NMR spectroscopy is used to gain microstructure information. Information based on tetrad probabilities is utilized to deduce an almost atactic configuration. In addition, ¹³C NMR spectroscopy gives evidence for the presence of head‐to‐head and tail‐to‐tail links. Refined analysis of the ¹H NMR spectra allows for the quantitative determination of the fraction of these links (23.5% of all links). Experimental evidence suggests that the polymerization proceeds via cyclopolymerization of the vinylphosphonic acid anhydride as an intermediate. Titration curves indicate that high‐molecular‐weight poly(vinylphosphonic acid) PVPA behaves as a monoprotic acid.

Radical polymerization of vinylphosphonic acid proceeds by cyclopolymerization of its anhydride.     

Poly(azomethine) Rotaxanes: Novel Water Soluble Supramolecular Polymers with High Molar Mass

A novel type of supramolecular poly(azomethine) was synthesized by the polycondensation of an inclusion complex of β‐cyclodextrin/poly(oxypropylene)diamine with one of β‐cyclodextrin/terephthaldehyde and a subsequent reaction with [60]fullerene as the end capping agent. Molar mass determination by gel permeation chromatography showed that the polymers had a high molar mass (about 150 kg · mol⁻¹) with a very narrow polydispersity. Isothermal titration calorimetric studies confirmed that each poly‐(oxypropylene)diamine unit could host seven cyclodextrin molecules, which was further supported by ¹H NMR spectroscopy and molecular modeling studies. Additional characterization by ¹³C NMR and FT‐IR spectroscopy, as well as by thermogravimetric analysis, confirmed the structure of the cyclodextrin‐based polyrotaxane.

     

Polymer Brushes by Nitroxide‐Mediated Polymerization

This review article describes the preparation of polymer brushes by nitroxide‐mediated radical polymerization using either the ‘grafting to’ or the ‘grafting from’ approach. The use of TEMPO as a classical initiator is intensively described. More sophisticated nitroxides are also included in the discussion. Brush formation on flat surfaces such as wafers and also on particles is reported. Finally, some applications of polymer brushes are presented.

     

Dichloromaleimide chemistry. IV. Preparation of poly(maleimide–ethers) from the reaction of bisdichloromaleimides with bisphenols

A newly discovered reaction between phenols and dichloromaleimides has led to the synthesis of a new class of polymers of high molecular weight. These materials, represented by the general formula may be called poly(maleimide–ethers). Unlike polyimides, these materials are soluble in appropriate solvents and may be cast or compressionmolded into tough, flexible films.     

Fluorsulfonylstickstoffverbindungen

The reactions of fluorosulfonylurea derivatives with phosphorus pentachloride in carbon tetrachloride leads to and . These compounds are easily fluroinated by arsenic trifluoride to the corresponding fluorosulfonyl derivatives. It was shown that PCl₅ is reliable for the fluorine-chlorine exchange. Isocyanate esterchlorides as well as carbonyl-fluoride derivatives react with compounds which have an active hydrogen atom. By this way were prepared: . By hydrolysis of , is probably formed as the first reaction product. The acid could be trapped with tetraphenylphosphoniumchloride as a well-cristalline salt. Fluorosulfonyl isocyanate reacts with aldehydes to the following compounds: FSO₂N ? CHCH₃, FSO₂N ? CHC₂H₅, FSO₂N ? CH? CH(CH₃)₂ and FSO₂N ? CHC₆H₅. The physical and chemical properties as well as IR and NMR spectra of the compounds are described and, in part, compared and discussed.     

Flash Photolysis of 2,4,6-Trinitrotoluene Solutions

Flash photolysis of 2,4,6-trinitrotoluene solutions (TNT) indicates a photochemically induced isomerization leading to the aci-quinoid isomer with an absorption maximum at 460 nm in nonpolar solvents, or the conjugate base of the aci-quinoid isomer with absorption maxima at 500, 540, and 630 nm in polar solvents. Both species, the quinoid isomer and the conjugate base, have transient existence and their identification was based on detailed spectroscopic and kinetic studies presented here. The magnitude of the negative charge on the transient conjugate base was determined with salt effect experiments and found to be equal to unity.     

Stereocontrolled synthesis of tricyclic fused oxazolidinone as antibacterial agent

Tricyclic fused oxazolidinone 3a and 3b have been synthesized as antibacterial agents in 12 and 11 steps respectively. The key intermediates 10a and 10b have been developed via opening of epoxide 9a and 9b and cyclization by the resulting oxygen anion attack.     

Multifunctional Poly(2‐oxazoline) Nanoparticles for Biological Applications

New multifunctional copoly(2‐oxazoline) nanoparticles were prepared for cell studies. The polymer contains double‐bond side chains as potential reaction sites for “thio”‐click reactions as well as a fluorescein label covalently bound to the polymer backbone. Using the nanoprecipitation technique, spherical nanoparticles of 200–800 nm were obtained. Confocal laser scanning microscopy measurements revealed the cellular uptake of the nanoparticles.

     

Polyaniline “Nanotube” Self‐Assembly: The Stage of Granular Agglomeration on Nanorod Templates

The identification and control of a critical stage of polyaniline “nanotube” self‐assembly is presented, namely the granular agglomeration or growth onto nanorod templates. When the synthesis pH is held above 2.5, smooth insulating nanorods exhibiting hydrogen bonding and containing phenazine structures are produced, while below pH 2.5, small 15–30 nm granular polyaniline nanoparticles appear to agglomerate onto the available nanorod surface, apparently improving conductivity of the resulting structures by three orders of magnitude. This finding affects both fundamental theories of polyaniline nanostructure self‐assembly and their practical applications.

     

Synthesis of POSS‐Functionalized Polyisobutylene via Direct Initiation

POSS‐functionalized polyisobutylenes (PIBs) were synthesized by carbocationic polymerization using an epoxy‐POSS/TiCl₄ initiating system in hexane/methyl chloride (60:40 v/v) solvent mixture at −80 °C. ¹H NMR spectroscopy verified the incorporation of one epoxy‐POSS per polymer chain. Light scattering and TEM analysis demonstrated the formation of 50–100 nm sized aggregates and micron‐sized clusters.